Newest Products
1.5'' Tri-Clamp x 3/4'' Female BSPP, Stainless Steel
A 1.5" Tri-Clamp to 3/4" Male Pipe Thread.304 Stainless Steel
$29.00
ForgeFit® Stainless Tri-Clamp Barb - 3/4 in. x 1.5 in. T.C.
A 1.5" Tri-Clamp to 3/4" barb fitting.304 Stainless Steel
$18.99
1.5'' Tri-Clamp x 1'' FPT, Stainless Steel
Connect a 1" female pipe thread fitting (FPT) to a 1.5" Tri-Clamp (TC) fitting with this stainless steel piece of hardware.
$22.00
1.5'' Tri-Clamp Gasket - Teflon
1.5" Tri-Clamp Teflon gasket.
$3.50
1.5" TC x 5/8" OD 90° Barb
This elbow will connect to any 1.5" TC port. It features an oversized barb designed to use with 1/2" tubing. This creates a full port opening for unrestricted flow and a tight seal that requires no hose clamps. Specifications: 1.5" TC 304SS Oversized 90 degree barb for 1/2" tubing
$17.00
1.5" TC Element - 240v
Spike Brewing 1.5" TC Ripple Element Specifications: 240 Volt, 5500 Watt Stainless Element Includes 1.5" TC Gasket and Clamp
$90.00
1" Stir Bar
Replacement 1" stir bar.
$8.80
#10 Dual Hole Silicone Stopper
#10 tapered silicone stopper with two holes. This silicone stopper fits plastic (PET) carboys and has two drilled holes to accomodate racking canes, thermowells, and airlocks. One hole is 3/8" that will fit an airlock and the other hole is 1/4" that will fit a racking cane or thermowell. You may need some lubricant to aid a racking cane or thermowell through the hole.
$5.50
Ball Lock Adapter Tapping Head for Sanke Kegs
Convert a commercial sanke keg to be used with ball lock fittings. To install, remove the keg spear, place the gasket on the keg ferrule with the beaded side facing up, attach the silicone dip tube and place the tapping head on the ferrule, then secure with the 2" tri-clamp. **Be sure to always depressurize the keg before removing the tapping head.** Includes: Ball Lock Post Lid 2" tri-clamp Single-side beaded tri-clamp gasket 60 cm silicone dip tube (23.6") Red 2.5 bar PRV (36 psi)
$65.00
EVABarrier Double Wall Draft Tubing - 6 mm ID x 9.5 mm OD
EVABarrier double wall tubing is an excellent choice for all draft dispensing applications. The inner barrier is an excellent gas barrier, keeping oxygen out and CO2 in. The inner wall is also extremely smooth to prevent bacteria and other microbes from attaching to the inside surface. The outer barrier gives the tubing a decent stiffness while still remaining pliable. This makes EVA Barrier remarkably kink resistant and the perfect choice for use with Duotight, John Guest, and other push-in fittings. The 6 mm (15/64") ID size is recommended to be used as gas line or long draw beverage lines. If you intend to use it as beverage line, it is recommended to use 20-25 ft. per line for adequate flow resistance. Specifications: Inner Diameter - 6 mm (15/64") Outer Diameter - 9.5 mm (3/8") PVC, BPA , and Plasticizer Free* Outer wall prevents oxidation and CO2 loss Smooth inner wall prevents microbial growth build-up *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects.
$11.00 - $77.00
Lotus™ Lupulin Hop Pellets
Lupulin is the small yellow glands inside of a hop cone that contain alpha-acids and essential oils. Through proprietary processing, Hopsteiner is able to separate the lupulin glands from the bract to provide a higher concentrate pellet containing less vegetal matter and more of the resins that boost flavor and aroma. Lupulin Pellets™ are a great option for your late hop additions and for dry hopping. Lotus™ Lupulin Pellets™ Aroma Specification: Orange, vanilla, candied grape, tropical Alpha-acids: 23-26% Total oils: 2.0-2.5 Note: Repacked in oxygen barrier packaged and nitrogen flushed to preserve freshness.
$4.10 - $40.55
Sultana™ Lupulin Hop Pellets
Lupulin is the small yellow glands inside of a hop cone that contain alpha-acids and essential oils. Through proprietary processing, Hopsteiner is able to separate the lupulin glands from the bract to provide a higher concentrate pellet containing less vegetal matter and more of the resins that boost flavor and aroma. Lupulin Pellets™ are a great option for your late hop additions and for dry hopping. Sultana™ Lupulin Pellets™ Aroma Specification: Pineapple, pine, bright citrus Alpha-acids: 21.5-24.5% Total oils: 4.0-5.0 Note: Repacked in oxygen barrier packaged and nitrogen flushed to preserve freshness.
$4.20 - $41.60
Lemondrop™ Lupulin Hop Pellets
Lupulin is the small yellow glands inside of a hop cone that contain alpha-acids and essential oils. Through proprietary processing, Hopsteiner is able to separate the lupulin glands from the bract to provide a higher concentrate pellet containing less vegetal matter and more of the resins that boost flavor and aroma. Lupulin Pellets™ are a great option for your late hop additions and for dry hopping. Lemondrop™ Lupulin Pellets™ Aroma Specification: Lemon, tangerine, green tea, melon Alpha-acids: 8.5-9.5% Total oils: 1.0-1.5 Note: Repacked in oxygen barrier packaged and nitrogen flushed to preserve freshness.
$3.60 - $35.25
Amarillo® Brand Cryo Hops® Hop Pellets
Cryo Hops® pellets are the concentrated lupulin of whole-leaf hops containing resins and aromatic oils. It is designed to provide intense hop flavor and aroma, enabling brewers to efficiently dose large quantities of alpha acids and oils without introducing astringent flavors or vegetative material. Cryo Hops® pellets can be utilized anywhere whole-leaf hops and hop pellets are traditionally applied. Amarillo® Cryo Hops® Aroma Specification: Grapefruit, stone fruit, orange, lemon Alpha-acids: 13-20% Beta-acids: 10-14% Cohumulone: 20-24% Total oils: 1.5-3.5 B-Pinene: 0.5-1% Myrcene: 45-70% Linalool: 0.4-0.8 Caryophyllene: 4-8% Farnesese: 7% Humulene 10-20% Geraniol: 0.1-0.5% Note: Repacked in oxygen barrier packaged and nitrogen flushed to preserve freshness. AMARILLO® is a trademark owned by Virgil Gamache Farms, Inc. Cryo Hops® is a trademark owned by Yakima Chief Hops
$5.00 - $50.05
Pail Opener
This pail opening tool easily pries open bucket lids. Color may vary
$6.95
Digital Thermometer
A simple pen-style thermometer that displays °F or °C. Good for measuring the temperature of liquid, food, and BBQ. Specifications: Temperature Range: -58°F ~ +572°F (-50°C ~ +300°C) Resolution: 0.1°C/F Battery Included: 1 x 1.5V (LR44) Probe made of stainless steel Overall dimensions (L x W): 9.6" x 0.9" (245mm x 25mm) 0.15" (4mm) Ø Probe Auto power off after 15 minutes
$8.80
187 ml Clear Champagne Bottle
This smaller champagne bottle format is perfect for specialty wines or for sample sizes. Specifications: Description: Champagne / SparklingCapacity: 187 ml (6.3oz)Color: Flint (Clear)Finish: 26mm bottle cap Case of 24 bottles This item is excluded from free shipping
$39.95
Micro Matic American "D" System Keg Coupler
The "D" system keg coupler, also known as American Sankey, is the most common system available in the USA. It is used by all the major North American breweries as well as most craft breweries. The keg coupler connects to the keg valve, "tapping" the keg. Both the gas line from the CO2 tank/regulator and the beer hose to the beer faucet attach to the coupler. Features Chrome plated brass body Tin-nickel plated probe Short handle is ideal for the smaller diameter 1/6 kegs Specifications System: "D" (American Sankey) Body Material: Chrome plated brass Probe Material: Tin-nickel alloy plated Handle Style: Lever Gas Port: 3/8" O.D. Barb (To fit 5/16" I.D. Gas Hose) Beer Port: 7/8"-14 Thread (U.S. Beer Industry Standard) Height: 3-13/16" Manufacturer: Micro Matic ⚠️WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. www.P65Warnings.ca.gov
$36.99
Connector Nipple, 2" x 1/4" NPT
This brass nipple is 2" in length and has 1/4" NPT, right hand threads (rht). It is commonly used for connecting regulators and air distributors/manifolds.
$4.99
Premium Plus Secondary Regulator 0-60psi
Safely and effectively control the flow of CO2 to a single keg in your draft beer system with this made in the USA, Micro Matic secondary regular. Secondary gas regulators reduce pressure from a primary regulator or gas blender, and provide this lower pressure to each individual keg. This secondary regulator comes with a single gauge with an adjustment range from 0-60 PSI range so you can quickly monitor the amount of gas flowing from the gas source to the keg. For added safety, this model has an integrated pressure relief valve that stops the gas flow if pressure gets too high (55-65 PSI). Premium Plus regulators come standard with a tamper evident adjustment screw and bonnet, preventing unauthorized adjustment to gas pressure which can cause service issues. Features Adjust pressure from 0 to 60 PSI Built for durability: forged brass body, accurate machining, chrome plated finish Premium quality metal gauges for durability Tamper evident adjustment screw and bonnet Nickel-plated valve seats for high corrosion resistance Enlarged CO2 port for high volume Safety relief valve releases at 55-65 PSI Factory leak tested at 145 PSI Made in USA Specifications: Performance: 1 Pressure / 1 Product Height: 7-1/4" Width: 3-3/4" Depth: 5-1/2" Output Pressure Gauge: 0-60 PSI, for accurate product pressure Outlet Barbs: 3/8" O.D. (To fit 5/16" I.D. Gas Hoses) Pressure Relief Valve: Safety Pressure Relief Valve Releases at 55-65 PSI Capacity: Safety pressure relief valve releases at 55-65 PSI
$69.99
Premium Plus Double Gauge Nitrogen Regulator
Safely control the flow of nitrogen to a single keg with this made in the USA, Micro Matic Premium Plus primary low pressure nitrogen regulator. The primary nitrogen regulator is designed to decrease the gas cylinders high pressure to a lower, usable pressure for: mix gas (CO2 - N) for beer, wine and cold brew dispensing or servicing a gas blender. For added safety, this model has an integrated pressure relief valve that stops the gas flow if pressure gets too high (at 55-65 PSI). This primary regulator comes with an output gauge that monitors pressure up to 60 PSI to provide you options for different beers while the tank gauge has a 0-3000 PSI range so you know how much pressure remains in your cylinder. Premium Plus regulators come standard with a tamper evident adjustment screw and bonnet, preventing unauthorized adjustment to gas pressure which can cause foaming/performance issues. Features Adjust pressure from 0 to 60 PSI Built for durability: forged brass body, accurate machining, chrome plated finish Premium quality metal gauges for durability Factory leak tested at 2900 PSI Tamper evident adjustment screw and bonnet Nickel-plated valve seats for high corrosion resistance Quad-ring inlet seal at tank connection Fixed exchangeable inlet seal Enlarged nitrogen port for high volume Safety relief valve releases at 55-65 PSI Made in USA For home or commercial use Use for mix gas (CO2 - N) for beer, wine and cold brew dispensing or servicing a gas blender NOTE: The primary nitrogen regulator is designed to decrease the gas cylinders high pressure to a lower, usable pressure for: mix gas (CO2 - N) for beer, wine and cold brew dispensing or servicing a gas blender. Specifications: Performance: 1 Pressure / 1 Product Output Pressure Gauage: 0-60 PSI, for accurate product pressure Tank Pressure Gauge: 0-3000 PSI, for accurate remaining tank pressure Outlet Barbs: 3/8" O.D. (To fit 5/16" I.D. Gas Hoses) Pressure Relief Valve: Safety pressure relief valve releases at 55-65 PSI
$84.99
Fermentis SafCider™ TF-6
Fermentis SafCider™ TF-6, the best cider yeast for a very high aromatic intensity and complexity towards fresh fruity notes (apple, banana-pear, red, citrus and exotic fruits) combined with interesting elaborated fruit notes (applesauce). Usage Recommendations: For sweet ciders from fresh apple juices. Very high aromatic intensity and complexity towards fresh fruity notes (apple, banana-pear, red, citrus and exotic fruits) combined with interesting elaborated fruit notes (applesauce). Please note that those observations are based on French cider recipe trials. Sweet and round mouthfeel strengthening candy like sensation. This cider yeast works at a wide temperature range between 10-30°C (50-86°F) with ideal temperatures between 18-24°C (64-75°F). • High malic acid consumption (up to 1.4g/L) Medium 2-phenylethanol and very high isoamyl acetate (candy-banana) producer
$6.95 - $74.99
Fermentis SafCider™ AC-4
Fermentis SafCider™ AC-4, the best cider yeast for an intensely fresh aromatic profile (apple, floral) with a crisp mouthfeel enhancing cider structure. Usage Recommendations: For sweet and dry ciders from fresh or concentrated apple juices. Intensely fresh aromatic profile (apple, floral) with a crisp mouthfeel enhancing cider structure. Please note that those observations are based on French cider recipe trials. Suitable for difficult fermentation conditions and mixes with sugar syrups. This cider yeast works at a wide temperature range between 10-30°C (50-86°F) with ideal temperatures between 18-24°C (64-75°F). Very low malic acid consumption (less than 0.4 g/L) Medium 2-phenylethanol and isoamyl acetate producer. High production of ethyl (fruity) esters
$6.95 - $74.99
Fermentis SafCider™ AS-2
Fermentis SafCider™ AS-2, The best cider yeast for a fresh aromatic profile (apple, citrus) with nice elaborated fruit notes (applesauce) bringing a good overall complexity. Usage Recommendations: For sweet and dry ciders from fresh or concentrated apple juices. Fresh aromatic profile (apple, citrus) with nice elaborated fruit notes (applesauce) bringing a good overall complexity. Sweet and round mouthfeel. Please note that those observations are based on French cider recipe trials. Suitable for difficult fermentation conditions and mixes with sugar syrups. This cider yeast works at a wide temperature range between 10-30°C (50-86°F) with ideal temperatures between 18-24°C (64-75°F). Medium malic acid consumption (up to 0.9g/L) Medium 2-phenylethanol and ester producer. Good balance between acetate (amylic) and ethyl (fruity) esters
$6.95 - $74.99
Carbonator Reactor Carbonation Keg Lid
Nothing is more refreshing that having your own soda water on tap at home. SodaStream units are great but filling up those tiny 1L bottles is a pain and those small CO2 cylinders run out fast and are expensive to swap. Solve this problem once and for all with the Continuous Soda Carbonator Keg Reactor Solution. KegLand has invented this really easy-to-use keg lid that attaches to a standard ball lock keg. Setup: Position the keg inside your fridge or kegerator (ideally below 40°F). Attach your beverage draft line to the soda water out post. Attach your gas line to the gas-in post. Set your CO2 regulator to 30-50 psi, depending on how highly carbonated you like your soda water. We highly recommend using a check valve on your CO2 line. On first use, purge the air from the headspace of the keg. Connect the mains water to the water inlet post on the lid of the keg. It is recommend to also use a check valve on your mains water line to prevent soda water from going back into your house mains. Depending on your mains water pressure, you may need to reduce it using the Duotight In-Line Regulator. For the Carbonator Keg Lid to work well, the mains water pressure should be 30-40 psi higher than your regulator set pressure (from Step 4). That's it. This simple unit will give you continuous soda water connected to your mains water.
$77.00
KOMOS® Stainless Draft Tower With Stainless Intertap Faucets
KOMOS® stainless steel draft tower with Intertap faucets, EVABarrier draft line, and Duotight push-to-connect fittings. These are the same tower kits inlcuded with the KOMOS Kegerator.Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing. Each tower kit comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free.Includes: Stainless steel draft tower Intertap faucet(s) Stainless steel faucet shank(s) with Duotight tailpieces EVABarrier gas and beverage tubing Draft tower mounting screws Faucet wrench 1-3 Tap Tower Dimensions: 13.4 in. tall (without faucets) 3 in. tower diameter 4.4 in. base diameter 4 Tap Tower Dimensions: 13.4 in. tall (without faucets) 4.5 in. tower diameter Interior mounting holes (does not include bottom collar)
$127.00 - $275.00
3/8" Full Port Stainless Ball Valve
304 stainless steel full port ball valve with 3/8" female pipe thread (FPT) on both ends. Note: Handle may be blue instead of the pictured yellow.
$16.50
3/8" Stainless Half Coupler
Stainless steel 3/8" female pipe thread (FPT) half coupler. Note: Half couplers have thread for insertion from one side only.
$4.99
Stainless Steel Distilling Parrot
Stainless steel distillers parrot used to take gravity readings continuously throughout the distilling process. Placed inline with the outlet of the still so drops of distillate drop directly into the parrot. Maximum capacity of 105 ml, not including the alcohol meter. Alcohol meter not included. Kegland Part number: KL14823
$94.00
7.8 Gallon Pail Fermenter Lid, BSG
Gasketed lid for 7.8 gallon BSG Handcraft branded fermenter pail. Available with or without the grommet for an airlock.
$9.49 - $9.99
Mt. Hood Rhizome
Grow your own hops with a rhizome root stock. Mount Hood is an excellent choice for pale lagers, wheat beers, and German or Belgian ales where a refined aroma with low to moderate bitterness is desirable. Mt. Hood is noble-like with suggestions of herbal notes, flowers, and green fruit. Mount Hood hops typically have an alpha acid range of 4.5-6.5%. Nugget hops are one of the recommended hops for beginner growers. The other recommended hops for beginners are Cascade and Magnum.
$7.00
Willamette Rhizome
Grow your own hops with a rhizome root stock. Willamette is an American aroma hop with an alpha acid percentage ranging from 4-6%. Willamette has a mild and pleasant aroma, with slightly spicy and floral tones, useful in English style ales. Cascade, Magnum, and Nugget hops are the recommended hops for beginner growers.
$7.00
Nugget Rhizome
Grow your own hops with a rhizome root stock. Nugget hops are an American bittering hop with a high alpha acid (11.5-14%). Known best for the smooth, clean bitterness it imparts, Nugget can also be put to use as an aroma hop. It is right at home in most American craft styles, especially those for which hop bitterness is a primary component (IPAS). The aroma and flavor are mild and quite sweet with a low-key, herbal/fruit quality: lemon candy, ginger, fresh oregano, and rosemary. Nugget hops are one of the recommended hops for beginner growers. The other recommended hops for beginners are Cascade and Magnum.
$7.00
Magnum Rhizome
Grow your own hops with a rhizome root stock. Magnum hops are a high alph acid (11-16%) German variety hop known for its smooth clean bitterness. Useful in continental lagers, pale ales, and IPAs. This variety of Magnum is cultivated in the U.S. Magnum hops are one of the recommended hops for beginner growers. The other recommended hops for beginners are Cascade and Nugget.
$6.00
Chinook Rhizome
Grow your own hops with a rhizome root stock. Chinook has a high alpha content of 11-14%. This American dual purpose hop delivers potent, smooth bitterness. The flavor and aroma are pungent, with suggestions of mountain pine and resin (especially as a dry hop) and notes of citrus and fragrant dried herb in the background. Useful in styles such as pale ales, IPAs, and lagers. Cascade, Magnum, and Nugget hops are the recommended hops for beginner growers.
$6.00
Centennial Rhizome
Grow your own hops with a rhizome root stock. Centennial is an American dual-purpose variety with high alpha acids (9.5-11.5%) and excellent aromatic capabilities. It's widely used as a finishing or dry hop as a stand-alone variety or part of a blend. The flavor and aroma notes are predominantly citrusy but with undertones of lemongrass and pine needles often evident. Used in styles such as pale ales, IPAs, stouts, blonde ales, and wheat ales. Cascade, Magnum, and Nugget hops are the recommended hops for beginner growers.
$6.00
