Kettles & Mash Tuns

45 products


  • Eco-Pot 20 Quart Stainless Steel Boiling Pot

    Eco-Pot 20 Quart Stainless Steel Boiling Pot

    6 in stock

    This affordable 5 gallon kettle is perfect for beginners and experienced craft brewers alike. Its manageable size allows for small batches while still being budget-friendly.Specifications: 0.5mm thick stainless sides and bottom 12.5" inner diameter 10.5" inner height Riveted handles on kettle body Kettle lid with riveted handle 5 gallon full capacity (3 gallons while boiling)

    6 in stock

    $34.99

  • 8.5 Gallon Brewmaster Brewing Kettle 8.5 Gallon Brewmaster Brewing Kettle

    8.5 Gallon Brewmaster Brewing Kettle

    2 in stock

    An economy stainless steel 8.5 gallon kettle with included ball valve and barb. Specifications: 8.5 Gallon Stainless Steel Brewmaster Brewing Kettle Two Welded 1/2" Full Couplers allow for internal and external attachments Stainless 1/2" Full Port Ball Valve & nipple included for bottom Coupler Stainless 1/2" Plug included for top coupler Stamped Volume Markers Silicone Handle Grips Internal Threading allows for conversion to Mash Tun or addition of whole hop filters Internal Dimensions: 13.75" Tall x 13.75" Ø 1 mm thick walls Made from 201 Stainless Steel

    2 in stock

    $114.99

  • KegLand Sergeant Sparge Head KegLand Sergeant Sparge Head

    KegLand Sergeant Sparge Head

    4 in stock

    The KegLand Sergeant Sparge Head is a super simple device designed to help spread and distribute your wort in a mash tun. It can also be used as the final transfer piece between kettle and fermenter to assist in aerating your wort prior to pitching your yeast. It is also designed to fit through the BrewZilla's glass lid or distillation lid so you can recirculate evenly over your mash by adjusting the pumps flow rate. Specifications: 1/2" Thread 2" Long x 3/4" Wide Stainless Steel Barb w/ 1/2" Stainless Steel Retaining Nut KegLand Part Number: KL33640

    4 in stock

    $9.99

  • 14 Gallon Brewmaster Brewing Kettle 14 Gallon Brewmaster Brewing Kettle

    14 Gallon Brewmaster Brewing Kettle

    1 in stock

    An economy stainless steel 14 gallon kettle with included ball valve and barb. Specifications: 14 Gallon Stainless Steel Brewmaster Brewing Kettle Two Welded 1/2" Full Couplers allow for internal and external attachments Stainless 1/2" Full Port Ball Valve & nipple included for bottom Coupler Stainless 1/2" Plug included for top coupler Stamped Volume Markers Silicone Handle Grips Internal Threading allows for conversion to Mash Tun or addition of whole hop filters Internal Dimensions: 17.5" Tall x 16" Ø 1 mm thick walls Made from 201 Stainless Steel

    1 in stock

    $169.99

  • S/S False Bottom (12 in. Diameter)

    S/S False Bottom (12 in. Diameter)

    1 in stock

    Looking to convert a 10 gallon beverage cooler into a mash tun?  This 12" stainless steel false bottom will fit right into the bottom of the cooler.  Includes a 3/8" barb fitting for connecting your silicone tubing to another barbed connector.

    1 in stock

    $42.99

  • BrewBuilt™ Brewing Kettle - 2x T.C. Ports BrewBuilt™ Brewing Kettle - 2x T.C. Ports

    BrewBuilt™ Brewing Kettle - 2x T.C. Ports

    8 in stock

    Limited inventory available in store.  Please allow additional time for processing. BrewBuilt's T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. The appetite for tri-clamp fittings continues to grow in the homebrewing market as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day. The base model comes without fittings so you can add whatever tri-clamp accessories best suit your needs. Also available with a Ball Valve or Butterfly Valve hardware pack. These days homebrewers have a lot of strong choices when it comes to their kettle purchase. BrewBuilt has adopted a modern feature set designed to make the brew day easier. Silicone handle and lid grips help prevent burns. Etched internal volume markings make filling the kettle for mash or boil simple. Welded valve and thermometer ports are leak-free and never require maintenance--no more discovering worn gaskets on brew day. Sealed handle rivets are strong and allow the entire kettle to be filled if necessary. And perhaps best of all, it features the signature BrewBuilt notched lid with a silicone plug that allows the lid to be in place while using immersion chillers or an Ultimate Sparge Arm. These kettles are truly designed for brewing.Key Features: Two welded T.C. couplers for a lifetime of leak free use AISI304 Stainless Steel construction for longevity and excellent corrosion resistance Stainless handles and rivets for secure lifting Silicone coated kettle and lid handles for heat protection Lid is designed to conveniently hang from a handle 4 mm Tri-Clad Bottom with Aluminum Core heats quickly and disperses heat evenly to prevent scorching Induction burner compatible 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 1.2:1 height to diameter ratio provides optimal evaporation rate during boiling Industry-First notched lid with silicone plug accommodates an immersion chiller or sparge arm Internally etched volume markers from top to bottom for easy filling BrewBuilt Homebrewing Products: Designed for Brewing, Built to Last. Size Kettle ID (in.) Height (in.) 10 13.78 16.54 15 15.75 18.90 20 17.72 21.26 30 19.69 23.62 50 23.62 28.30 Limited inventory available in store.  Please allow additional time for processing.

    8 in stock

    $244.99 - $569.99

  • Steam Condenser Lid Steam Condenser Lid

    Steam Condenser Lid

    Out of stock

    Built to transform steam into liquid during the boil, Spike Brewing's steam condenser lid will enable you to brew inside without worrying about moisture collecting on your walls and ceiling, which can cause mold issues. These lids are not only designed to fit Spike kettles, but will also work with most other kettle brands on the market. From a better boil-off rate to major cost savings and conveniences, you will find many benefits by adding this to your brew setup. Features & Specs: Compared to boiling without a lid, the Steam Condenser Lid has a 50% reduced boil-off rate and results in a ~6% total boil-off. Replaces the need to install a hood for indoor brewing Prevents mold from forming on walls and ceiling Third-party lab tested to show that DMS is completely undetectable (under 25 ppb) after only 30-45 minutes of boiling Discharge water is very hot and can be used for cleaning Compatible with Spike Kettles and the Spike Solo 1.5" tri-clamp port for CIP ball 4" tri-clamp port for hop additions Water usage: 15 gallons/hour for 10g, 15g & 20g lids 25 gallons/hour for 30g &. 50g lids Lid, pump, condenser mister, piping, clamps, gaskets, barbs & caps included with purchase For more information, see Spike Brewing's FAQ. To get started using the lid, see our Steam Condenser Lid Product and Process guides. Note: Limited inventory availability in-store.  Sizes not carried in-store will be drop shipped from the vendor.

    Out of stock

    $360.00 - $475.00

  • 10 Gallon Spike Brewing Kettle - V4, Vertical Couplers 10 Gallon Spike Brewing Kettle - V4, Vertical Couplers

    10 Gallon Spike Brewing Kettle - V4, Vertical Couplers

    4 in stock

    10 GALLON STAINLESS BREW KETTLE - V4 Spike Brewing has once again re-designed their brew kettle.  They make one of the best brewing kettles available on the market.  It is the thickest kettle on the market, with US welded fittings (no more weldless fittings) at a factory direct price. Kettle Features: 2.5 - 6 gallon batch size 304 (18/8) stainless steel  Sanitary welded coupler design (done at our facility in Milwaukee, WI) 1.2mm thick walls (thickest on the market) 5mm tri-clad bottom (induction capable) Internal volume markings Polished finish 13.8¨ wide by 17.0¨ tall Domed bottom design Bottom coupler 1.5" off the bottom (1 gallon mark) Top coupler 6" off the bottom (4 gallon mark) Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store.  Drop ships from vendor.

    4 in stock

    $285.00

  • BrewZilla Stainless Double Pulley Set BrewZilla Stainless Double Pulley Set

    BrewZilla Stainless Double Pulley Set

    1 in stock

    If you are looking for the easy way to lift your malt pipe from your single vessel BrewZilla or other brewery then this is the easy way to do it. The setup includes all the parts you need. Simply screw the shackle into the roof or overhead beam and then secure the wall cleat and away you go. It will only take a couple moments to install. The double pulley is used so it's possible to lift the large malt pipe in the 65L BrewZilla unit. This stainless steel pulley set has been made from all 304 grade stainless steel, nylon and non-corrosive materials. Suitable for: 35L and 65L BrewZilla or brew in a bag. Contains: 6mm x 8 meters rope 1 x Nylon Wall Cleat 2 x Stainless Pulley 2 x Stainless Carabiner 2 x Stainless Band Rope Anchor

    1 in stock

    $19.99

  • BrewZilla Lift-N-Lock Pulley System BrewZilla Lift-N-Lock Pulley System

    BrewZilla Lift-N-Lock Pulley System

    1 in stock

    This heavy-duty pulley is made from strong nylon strapping, laser cut 304 grade stainless steel and is capable of lifting large heavy loads with ease. It's the perfect pulley for lifting the heavy malt pipe from your BrewZilla or other all-in-one system. It's a bit more expensive than other pulley systems, but there's no comparison when it comes to easily lifting or lowering the malt pipe. The included strap is 10m long by 25mm wide (32.8 ft. x 1 in.). The pulley system enables you to multiply your pulling force by 4 times. If you apply 60 lbs of pulling force, the pulley can lift 240 lbs with relative ease. Be sure that the beam you mount the pulley to is rated for the total amount of force being applied i.e. pulling force plus load weight, so for this example 300+ lbs.

    1 in stock

    $69.99

  • Spike Brewing False Bottom for TC Kettles Spike Brewing False Bottom for TC Kettles

    Spike Brewing False Bottom for TC Kettles

    2 in stock

    These Spike Brewing Spike+ false bottom is for use with their Spike+ line which uses TC fittings. For the standard Spike kettle line that uses NPT fittings please see HERE. Design Features: All stainless design; no Silicone gasket to make a seal Low profile design; extremely low dead space (<.25gal)  Best filtering on the market due to dual stage filter design; 99.9% grain filtering efficiency TC Pickup tube, gasket and clamp are included False bottom and pick up tube are Made in the USA! 2 Stage Filtering: Stage 1: Filters through top plate's optimally engineered sized laser cut slits Stage 2: Bottom ring supports the grain weight while also filtering the wort again before it reaches the pickup tube **False bottoms are not designed to filter pellet hops in the boil kettle. Instead you'll want to create a whirlpool to center the hop material and then drain using a side pickup (HERE)**

    2 in stock

    $135.00 - $250.00

  • Sparge Arm Assembly

    Sparge Arm Assembly

    Out of stock

    This sparge assembly features a sturdy base that will handle a mash tun with up to a 20" diameter. The setup is adjustable and includes a spray wort aerator which gently disperses your sparge water over your grain bed.  Works great with cooler mash tun systems! Instruction Sheet

    Out of stock

    $24.95

  • 50 Gallon Spike+ Kettle 50 Gallon Spike+ Kettle

    50 Gallon Spike+ Kettle

    Out of stock

    50 GALLON SPIKE+ BREW KETTLE Introducing Spike Brewing's new Spike+ line of kettles! Spike+ is just that, an improvement on an already great platform. The Spike+ line draws from the pro side of brewing with the standard use of tri-clamp (TC) fittings. TC fittings do not have any threads and use a gasket and clamp which allows for quick attaching/detaching of fittings. The Spike+ line is for the most serious homebrewers! While designing the setup of the kettle, Spike Brewing offset the ports on these kettles, so you have ample room to use our butterfly valves, or other accessories, with ease. Kettle Features: 15 – 32 gallon batch 304 (18/8) stainless steel  Sanitary welded coupler design (done at Spike Brewing's facility in Milwaukee, WI) 1.5mm thick walls (thickest on the market) 6mm tri-clad bottom (induction capable) Internal volume markings Polished finish 23.6¨ wide by 27.1¨ tall Domed bottom design Bottom coupler 2" off the bottom (4 gallon mark) Top coupler 4" off the bottom (8 gallon mark) Staggered design keeps the top port submerged with half batches Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store.  Drop ships from vendor.

    Out of stock

    $704.00

  • 25 Gallon Brewmaster Brew Kettle 25 Gallon Brewmaster Brew Kettle

    25 Gallon Brewmaster Brew Kettle

    Out of stock

    Affordable option for a larger stainless steel kettle. This kettle includes internal volume markings, silicone grips on the handles, and two welded full couplers with a ball valve, plug, and nipple. Features: 25 gallon kettle made from 201 stainless steel Two welded 1/2" couplers accommodates internal and external attachments Stainless 1/2" full port ball valve & nipple  Stainless 1/2" plug Stamped volume markers Silicone grips on handles Internal threading allows for conversion to mash tun or hop filters Internal Dimensions: 23.5"  tall x 17.75" Note: Limited availability in store. Drop ships from vendor.

    Out of stock

    $239.99

  • BrewBuilt Kettle T.C. x T.C. Ball Valve Pack

    BrewBuilt Kettle T.C. x T.C. Ball Valve Pack

    1 in stock

    Ball Valve hardware pack for the BrewBuilt Brewing Kettle with 2 x tri-clamp ports. Includes ball valve and hardware for connecting tubing at the kettle's bottom port. End cap included to seal the top port if a thermometer or other accessory is not in place. Includes: (1) Stainless 1.5" Tri-Clamp 3-Piece Ball Valve (1) Stainless 1.5" Tri-Clamp x 1/2" Barb Adapter (3) Stainless 1.5" Tri-Clamp (3) EPDM 1.5" Tri-Clamp Gasket (1) Stainess 1.5" End Cap

    1 in stock

    $69.99

  • 16 Gallon Brewer's Best Basic Brewing Pot

    16 Gallon Brewer's Best Basic Brewing Pot

    1 in stock

    Get brewing with the 16 Gallon Brewer's Best Basic Brewing Pot! From the Brewer's Best® line, this versatile pot can be used as a primary kettle or for heating sparge water. With its 10-gallon batch capacity and compatibility with gas stoves and propane burners, it's perfect for brewing. Specifications: Graduated marking inside and out Lid included No ports Constructed of high quality 201 stainless steel 0.8mm wall and bottom (20 guage) Handles on both sides for easy lifting 15.7" diameter x 18.9" high 8 pounds

    1 in stock

    $99.99

  • 8 Gallon Brewer's Best Basic Brewing Pot

    8 Gallon Brewer's Best Basic Brewing Pot

    1 in stock

    Get brewing with the 8 Gallon Brewer's Best Basic Brewing Pot! From the Brewer's Best® line, this versatile pot can be used as a primary kettle or for heating sparge water. With its 5-gallon batch capacity and compatibility with gas stoves and propane burners, it's perfect for both full and partial mash recipes. Specifications: Graduated marking inside and out Lid included No ports Constructed of high quality 201 stainless steel 0.8mm wall and bottom (20 guage) Handles on both sides for easy lifting 12.5" diameter x 17" high

    1 in stock

    $64.99

  • BrewBuilt® Brewing Kettle | T.C. x T.C. Ball Valve BrewBuilt® Brewing Kettle | T.C. x T.C. Ball Valve

    BrewBuilt® Brewing Kettle | T.C. x T.C. Ball Valve

    2 in stock

    Drop Ships from vendor. Please allow additional time for processing. A Feature-Packed Kettle at an Amazing Price! Our new T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. Tri-clamp fittings are standard fare in professional breweries, and they’ve been widely adopted in homebrewing as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day. With the ball valve hardware pack, you'll have everything you need to use the kettle on Day 1. The advantage of this model is that you're getting a fully functional kettle and the lowest cost. The disadvantage is that ball valves tend to trap a small amount of wort inside them, so you may need to break it down for cleaning in between brew days.   If you want the ultimate sanitary option, the BrewBuilt Brew Kettle with Butterfly Valve hardware pack is available. Or you can purchase the kettle without fittings and customize it with the fiitings that best suit your needs.   Ball Valve Pack Includes: 1/2" Ball Valve (T.C. x T.C.) 3 x Tri-Clamps 3 x Tri-Clamp Gaskets 1.5" T.C. x 1/2" Barb T.C. End Cap (for plugging thermometer port) These days homebrewers have a lot of strong choices when it comes to their kettle purchase. BrewBuilt has adopted a modern feature set designed to make the brew day easier. Silicone handle and lid grips help prevent burns. Etched internal volume markings make filling the kettle for mash or boil simple. Welded valve and thermometer ports are leak-free and never require maintenance--no more discovering worn gaskets on brew day. Sealed handle rivets are strong and allow the entire kettle to be filled if necessary. And perhaps best of all, it features the signature BrewBuilt notched lid with a silicone plug that allows the lid to be in place while using immersion chillers or an Ultimate Sparge Arm. These kettles are truly designed for brewing. Key Features: Two welded T.C. couplers for a lifetime of leak free use AISI304 Stainless Steel construction for longevity and excellent corrosion resistance Stainless handles and rivets for secure lifting Silicone coated kettle and lid handles for heat protection Lid is designed to conveniently hang from a handle 4 mm Tri-Clad Bottom with Aluminum Core heats quickly and disperses heat evenly to prevent scorching Induction burner compatible 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 1.2:1 height to diameter ratio provides optimal evaporation rate during boiling Industry-First notched lid with silicone plug accommodates an immersion chiller or sparge arm Internally etched volume markers from top to bottom for easy filling BrewBuilt Homebrewing Products: Designed for Brewing, Built to Last. Size Kettle ID (in.) Height (in.) 10 13.78 16.54 15 15.75 18.90 20 17.72 21.26 30 19.69 23.62 50 23.62 28.30   Drop Ships from vendor. Please allow additional time for processing.

    2 in stock

    $294.99 - $619.99

  • Replacement Silicone Tubing Kit - BrewZilla Gen 4

    Replacement Silicone Tubing Kit - BrewZilla Gen 4

    1 in stock

    This is a complete replacement silicone tubing kit for the pump and ball valve tubing on a 35L Gen 4 BrewZilla. Made from food grade silicone and temperature resistant to 356°F (180°C). KegLand Part Number: KL27731

    1 in stock

    $9.99

  • BrewBuilt™ Mash Tun False Bottom Kit - 1.5 in. T.C. BrewBuilt™ Mash Tun False Bottom Kit - 1.5 in. T.C.

    BrewBuilt™ Mash Tun False Bottom Kit - 1.5 in. T.C.

    2 in stock

    Convert the BrewBuilt T.C. brewing kettle into a mash tun using one of these false bottom kits. The heavy duty false bottom rests low in the kettle, utilizing a tri-clamp style maximizer that reduces dead space and pulls from the very bottom of your kettle, leaving no wort behind. A Silicone gasket rims the False Bottom, ensuring a tight seal to the wall with no chance of grain bypass. A handle is welded to the top of the false bottom for easy removal. Specifications: 1.5" tri-clamp and gasket included Welded T.C. maximizer False bottom gasket for tight seal Welded legs and handle Made from 304 stainless steel NOTE: These false bottom kits will fit all BrewBuilt T.C. kettles, including the electric kettle with SlingBlade heating element. It is not recommended converting the electric kettle into a mash tun as the element will scorch the grain. If you wish to use the false bottom in your boil kettle, it should be noted that the screen is designed to filter grain, so fine particle vegetal matter will pass through.

    2 in stock

    $114.99 - $124.99

  • BrewBuilt™ Brewing Kettle - Ball Valve BrewBuilt™ Brewing Kettle - Ball Valve

    BrewBuilt™ Brewing Kettle - Ball Valve

    4 in stock

    Drop Ships from vendor. Please allow additional time for processing. BrewBuilt's T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. The appetite for tri-clamp fittings continues to grow in the homebrewing market as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day. With the ball valve hardware pack, you'll have everything you need to use the kettle on Day 1. The advantage of this model is that you're getting a fully functional kettle and the lowest cost. The disadvantage is that ball valves tend to trap a small amount of wort inside them, so you may need to break it down for cleaning in between brew days.   If you want the ultimate sanitary option, the BrewBuilt Brew Kettle with Butterfly Valve hardware pack is available. Or you can purchase the kettle without fittings and customize it with the fiitings that best suit your needs.   Ball Valve Pack Includes: 1/2" Ball Valve 2 x Tri-Clamps 2 x Tri-Clamp Gaskets T.C. to 1/2" MPT adapter 1/2" MPT x 5/8" Barb T.C. End Cap (for plugging thermometer port) Teflon Tape These days homebrewers have a lot of strong choices when it comes to their kettle purchase. BrewBuilt has adopted a modern feature set designed to make the brew day easier. Silicone handle and lid grips help prevent burns. Etched internal volume markings make filling the kettle for mash or boil simple. Welded valve and thermometer ports are leak-free and never require maintenance--no more discovering worn gaskets on brew day. Sealed handle rivets are strong and allow the entire kettle to be filled if necessary. And perhaps best of all, it features the signature BrewBuilt notched lid with a silicone plug that allows the lid to be in place while using immersion chillers or an Ultimate Sparge Arm. These kettles are truly designed for brewing. Key Features: Two welded T.C. couplers for a lifetime of leak free use AISI304 Stainless Steel construction for longevity and excellent corrosion resistance Stainless handles and rivets for secure lifting Silicone coated kettle and lid handles for heat protection Lid is designed to conveniently hang from a handle 4 mm Tri-Clad Bottom with Aluminum Core heats quickly and disperses heat evenly to prevent scorching Induction burner compatible 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 1.2:1 height to diameter ratio provides optimal evaporation rate during boiling Industry-First notched lid with silicone plug accommodates an immersion chiller or sparge arm Internally etched volume markers from top to bottom for easy filling BrewBuilt Homebrewing Products: Designed for Brewing, Built to Last. Size Kettle ID (in.) Height (in.) 10 13.78 16.54 15 15.75 18.90 20 17.72 21.26 30 19.69 23.62 50 23.62 28.30   Drop Ships from vendor. Please allow additional time for processing.

    4 in stock

    $284.99 - $609.99

  • 857c41bc36ba2d1be4e16d321e3f15b7%2F18.5 Gallon Brewmaster Stainless Steel Brew Kettle.png 857c41bc36ba2d1be4e16d321e3f15b7%2F18.5 Gallon Brewmaster Stainless Steel Brew Kettle Volume Mark.jpg

    18.5 Gallon Brewmaster Brewing Kettle

    1 in stock

    An economy stainless steel 18.5 gallon kettle with included ball valve and barb. Specifications: 18.5 Gallon Stainless Steel Brewmaster Brewing Kettle Two Welded 1/2" Full Couplers allow for internal and external attachments Stainless 1/2" Full Port Ball Valve & nipple included for bottom Coupler Stainless 1/2" Plug included for top coupler Stamped Volume Markers Silicone Handle Grips Internal Threading allows for conversion to Mash Tun or addition of whole hop filters Internal Dimensions: 18" Tall x 17.75" Ø 1.2 mm thick walls Made from 201 Stainless Steel

    1 in stock

    $199.99

  • Spike Brewing False Bottom for NPT Kettles Spike Brewing False Bottom for NPT Kettles

    Spike Brewing False Bottom for NPT Kettles

    Out of stock

    These Spike Brewing false bottoms are for use with their standard Spike kettle line that uses NPT fittings. For the standard Spike+ kettle line that uses TC fittings please see HERE. Design Features: All stainless design; no Silicone gasket to make a seal Low profile design; extremely low dead space (<.25gal)  Best filtering on the market due to dual stage filter design; 99.9% grain filtering efficiency Pickup tube and push to connect fitting are included False bottom and pick up tube are Made in the USA! 2 Stage Filtering: Stage 1: Filters through top plate's optimally engineered sized laser cut slits Stage 2: Bottom ring supports the grain weight while also filtering the wort again before it reaches the pickup tube **False bottoms are not designed to filter pellet hops in the boil kettle. Instead you'll want to create a whirlpool to center the hop material and then drain using a side pickup (HERE)**

    Out of stock

    $115.00 - $230.00

  • False Bottom 9'', S/S

    False Bottom 9'', S/S

    1 in stock

    For any container with at least a 9" opening, such as a bucket or 5 gallon insulated cooler. The barb fitting is 3/8". Made from stainless steel.

    1 in stock

    $35.00

  • 30 Gallon Spike Brewing Kettle - V4, Vertical Couplers 30 Gallon Spike Brewing Kettle - V4, Vertical Couplers

    30 Gallon Spike Brewing Kettle - V4, Vertical Couplers

    Out of stock

    30 GALLON STAINLESS BREW KETTLE - V4 Spike Brewing has once again re-designed their brew kettle.  They make one of the best brewing kettles available on the market.  It is the thickest kettle on the market, with US welded fittings (no more weldless fittings) at a factory direct price. Kettle Features: 10 - 20 gallon batch size 304 (18/8) stainless steel  Sanitary welded coupler design (done at our facility in Milwaukee, WI) 1.5mm thick walls (50% thicker than competition) 6mm tri-clad bottom (induction capable) Internal volume markings Polished finish 19.7¨ wide by 24.1¨ tall Domed bottom design Bottom coupler 1.5" off the bottom (2.25 gallon mark) Top coupler 6" off the bottom (8 gallon mark) Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store.  Drop ships from vendor.

    Out of stock

    $475.00

  • 20 Gallon Spike+ Kettle 20 Gallon Spike+ Kettle

    20 Gallon Spike+ Kettle

    Out of stock

    20 GALLON SPIKE+ BREW KETTLE Introducing Spike Brewing's new Spike+ line of kettles! Spike+ is just that, an improvement on an already great platform. The Spike+ line draws from the pro side of brewing with the standard use of tri-clamp (TC) fittings. TC fittings do not have any threads and use a gasket and clamp which allows for quick attaching/detaching of fittings. The Spike+ line is for the most serious homebrewers! While designing the setup of the kettle, Spike Brewing offset the ports on these kettles, so you have ample room to use our butterfly valves, or other accessories, with ease. Kettle Features: 6 – 15 gallon batch 304 (18/8) stainless steel  Sanitary welded coupler design (done at Spike Brewing's facility in Milwaukee, WI) 1.2mm thick walls (thickest on the market) 5mm tri-clad bottom (induction capable) Internal volume markings Polished finish 17.7¨ wide by 21.4¨ tall Domed bottom design Bottom coupler 2" off the bottom (2.5 gallon mark) Top coupler 4" off the bottom (4 gallon mark) Staggered design keeps the top port submerged with half batches Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store.  Drop ships from vendor.

    Out of stock

    $440.00

  • 10 Gallon Spike+ Kettle 10 Gallon Spike+ Kettle

    10 Gallon Spike+ Kettle

    2 in stock

    10 GALLON SPIKE+ BREW KETTLE Introducing Spike Brewing's new Spike+ line of kettles! Spike+ is just that, an improvement on an already great platform. The Spike+ line draws from the pro side of brewing with the standard use of tri-clamp (TC) fittings. TC fittings do not have any threads and use a gasket and clamp which allows for quick attaching/detaching of fittings. The Spike+ line is for the most serious homebrewers! While designing the setup of the kettle, Spike Brewing offset the ports on these kettles, so you have ample room to use our butterfly valves, or other accessories, with ease. Kettle Features: 2.5 – 6 gallon batch 304 (18/8) stainless steel  Sanitary welded coupler design (done at Spike Brewing's facility in Milwaukee, WI) 1.2mm thick walls (thickest on the market) 5mm tri-clad bottom (induction capable) Internal volume markings Polished finish 13.8¨ wide by 17.0¨ tall Domed bottom design Bottom coupler 2" off the bottom (1.25 gallon mark) Top coupler 4" off the bottom (2.5 gallon mark) Staggered design keeps the top port submerged with half batches Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store.  Drop ships from vendor.

    2 in stock

    $330.00

  • 10 Gallon Mash Tun 10 Gallon Mash Tun

    10 Gallon Mash Tun

    1 in stock

    10 gallon Igloo cooler mash tun. Includes a 12" stainless steel false bottom, a weldless stainless spigot, 1/2" MPT x 3/8" stainless steel barb, 3/4" NPT gasket, 1 foot of 3/8" high temp tubing, and hose clamps.

    1 in stock

    $149.99

  • BrewBuilt Kettle T.C. x 1/2" FPT Ball Valve Pack

    BrewBuilt Kettle T.C. x 1/2" FPT Ball Valve Pack

    2 in stock

    Ball Valve hardware pack for the BrewBuilt Brewing Kettle with 2 x tri-clamp ports. Includes ball valve and hardware for connecting tubing at the kettle's bottom port. End cap included to seal the top port if a thermometer or other accessory is not in place. Includes: (1) Stainless 3-Piece Ball Valve - 1.5" T.C. x 1/2" FPT (1) Stainless 1/2" MPT x 5/8" Barb Adapter (2) Stainless 1.5" Tri-Clamp (2) EPDM 1.5" Tri-Clamp Gasket (1) Stainless 1.5" End Cap Teflon Tape

    2 in stock

    $49.99

  • 16 Gallon Pot/Kettle False Bottom

    16 Gallon Pot/Kettle False Bottom

    2 in stock

    An all-grain brewing essential, false bottoms lay in the bottom of a mash tun and prevent grain from leaving, allowing the wort to flow freely into the boil kettle. Fits the 16 gallon Brewer's Best® pots and kettles. Specifications 15.5" diameter Stainless Steel Welded legs

    2 in stock

    $89.99

  • 8 Gallon Pot/Kettle False Bottom

    8 Gallon Pot/Kettle False Bottom

    2 in stock

    An all-grain brewing essential, false bottoms lay in the bottom of a mash tun and prevent grain from leaving, allowing the wort to flow freely into the boil kettle. Fits the 8 gallon Brewer's Best® pots and kettles. Specifications 11.5" diameter Stainless Steel Welded legs

    2 in stock

    $79.99

  • 16 Gallon Brewer's Beast Brewing Kettle with Ports

    16 Gallon Brewer's Beast Brewing Kettle with Ports

    2 in stock

    The Brewer's BeAst® 16 gallon brew kettle with ports is a perfect choice for intermedieate and advanced brewers. Perfect for full boil brewing, small scale mashing or brew in a bag! The Brewer's BeAst® kettle is a perfect upgrade from the basic brew pot or brew kettle. Fetaures two threaded ports that allow for easy attachement of ball valves, a temperature guage or other accessories. This kettle is ready to be customized as you see fit. Great for use on gas stoves, propane burners or even inductions style stoves. Specifications: Graduated marking inside and out Lid included Two welded 1/2" npt threaded ports Tri-clad 4mm induction ready bottom 1.0mm walls Silicone dipped handles 15.7" diameter x 18.9" high

    2 in stock

    $219.99

  • 8 Gallon Brewer's Beast Brewing Kettle with Ports

    8 Gallon Brewer's Beast Brewing Kettle with Ports

    2 in stock

    The Brewer's BeAst® 8 gallon brew kettle with ports is a perfect choice for intermedieate and advanced brewers. Perfect for full boil brewing, small scale mashing or brew in a bag! The Brewer's BeAst® kettle is a perfect upgrade from the basic brew pot or brew kettle. Fetaures two threaded ports that allow for easy attachement of ball valves, a temperature guage or other accessories. This kettle is ready to be customized as you see fit. Great for use on gas stoves, propane burners or even inductions style stoves. Specifications: Graduated marking inside and out Lid included Two welded 1/2" npt threaded ports Tri-clad 4mm induction ready bottom 1.0mm walls Silicone dipped handles 11.8" diameter x 16.9" high

    2 in stock

    $154.99

  • 16 Gallon Brewer's Best Basic Brewing Pot with Ports

    16 Gallon Brewer's Best Basic Brewing Pot with Ports

    2 in stock

    Get brewing with the 16 Gallon Brewer's Best Basic Brewing Pot! From the Brewer's Best® line, this versatile pot can be used as a primary kettle or for heating sparge water. With its 10-gallon batch capacity and compatibility with gas stoves and propane burners, it's perfect for both full and partial mash recipes. This kettle features two threaded ports that allow for easy attachment of ball valves, a temperature gauge or other accessories. Customize as you see fit! Specifications: Graduated marking inside and out Lid included Two welded 1/2" npt threaded ports Constructed of high quality 201 stainless steel 1.0mm wall and bottom Handles on both sides for easy lifting 15.7" diameter x 18.9" high

    2 in stock

    $124.99

  • 8 Gallon Brewer's Best Basic Brewing Pot with Ports

    8 Gallon Brewer's Best Basic Brewing Pot with Ports

    2 in stock

    Get brewing with the 8 Gallon Brewer's Best Basic Brewing Pot! From the Brewer's Best® line, this versatile pot can be used as a primary kettle or for heating sparge water. With its 5-gallon batch capacity and compatibility with gas stoves and propane burners, it's perfect for both full and partial mash recipes. This kettle features two threaded ports that allow for easy attachment of ball valves, a temperature gauge or other accessories. Customize as you see fit! Specifications: Graduated marking inside and out Lid included Two welded 1/2" npt threaded ports Constructed of high quality 201 stainless steel 1.0mm wall and bottom Handles on both sides for easy lifting 12.5" diameter x 17" high

    2 in stock

    $89.99

  • Solo Tri-Clamp Basket Solo Tri-Clamp Basket

    Solo Tri-Clamp Basket

    Out of stock

    Spike Brewing's Solo basket is designed for both convenience and functionality. Purposely built with all stainless steel for increased durability and ease of cleaning. This basket will literally take hours off your brew day and cleaning! Features & Specs: Uses only solid 304 stainless steel; no bags or mesh that can tear Sanitary welded coupler design (done at Spike's facility in Milwaukee, WI) 1.2mm thick walls Thick stainless steel hooks on basket easily holds wet grain on the kettle lip during vorlauf or while the basket drains Bottom of the basket features precision-lasered slits matching the false bottoms on Spike's commercial brewing systems Basket has tapered design to promote good flow through the grain bed Limited availability in-store.  Drop ships from vendor.

    Out of stock

    $330.00 - $385.00

Footer image

© 2025 Home Fermenter®, Powered by Shopify

    • American Express
    • Apple Pay
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account