Clarifiers

Whirlfloc® T kettle coagulant and fining agent is a purified, high molecular weight carrageenan powder extracted from Irish Moss algae, put in a convenient tablet form. It reacts with colloidal, haze promoting material in the wort to accelerate the formation of dense and compact trub during the hot and cold wort breaks. Whirlfloc binds with the trub and is removed with that material by settling or filtration before the beer is finished. It does not remain in the beer. This saves time, boosts wort recovery, and results in a brighter wort. Improved wort clarity with Whirlfloc T leads to cleaner fermentation and easier filtration afterward. Recommended Usage: For 5 gallons, add 0.2-0.4 tablets to the boiling kettle, 10 minutes before the end of boiling. Occasionally as much as a 1 full tablet is required, especially in low-pH brews.Tablets do not need to be hydrated and should dissolve rapidly. If problems occur, the tablet may be crushed prior to use.

Read more less

Irish Moss is a seaweed derived fining agent used by many brewers to help make a clear beer without the need for a filter, and to prevent chill haze.

Read more less

Super-Kleer K.C. is a 2-stage fining kit sized to dose 5-6 gallons of beer or wine. Each 65 ml kit includes separate packets of liquid Kieselsol and liquid Chitosan finings. The combination of fining agents accelerates the sedimentation of yeast and other particulates, leaving the beverage brilliantly clear in 12-48 hours. Super-Kleer K.C. may not clear pectin hazes or cloudiness caused by hard water.The Chitosan in Super-Kleer K.C. is a shellfish derivative.

Read more less

Bentonite is a negative charged, clay-like mineral that removes positively charged particles. It works best when the wine is at warmer temperature so it is suggested clearing with bentonite in the late spring or early summer. It is also more effective at a lower pH because the positive charge on proteins is stronger at lower pH levels.  It is usually added prior to fermentation, sometimes during secondary.   When making a wine kit from concentrate you will often add the bentonite on the first day. This happens for a couple of reasons. It is used as a nucleation sites for the removal of CO2. Additionally, the bentonite is moved all around the wine by the CO2 making it more effective in a shorter time period.Generic low level fining for five gallons: blend 1/2 tsp (approximately 3g) with 1/2 cup of hot water (140 to 200 F) in a blender for 1-2 minutes. Let stand for 60 minutes, mix, and stir into wine. Let stand for 10-14 days and then rack off. This is fining at .16g/LFor a generic mid level addition: Follow above directions but use 9 grams of with 3/4 cup of water. This is fining at .5g/L.

Read more less

CellarScience® SilaFine - Beer Fining Agent SilaFine is an easy-to-use, vegan friendly fining agent that quickly creates crystal clear beer by removing yeast and haze-forming particles. SilaFine is a unique, negatively charged silica sol fining agent that binds with and positively charged haze active proteins and polyphenols as well as yeast cells. SilaFine does not target foam active head forming proteins, leaving beer foam in glass unaffected. Use:Add 10ml or 1 tbsp per 5 gallons of finished beer. Gently rouse the beer to fully disperse the clarifier. Most effective on beer that has been chilled below 39°F. If the beer has not cleared after 24 hours, a second dose can be added. SilaFine should be stored cool, but do not freeze. Whirlpool: SilaFine can also be used in the whirlpool at a rate of 0.5-1ml per gallon to achieve a quicker and more compact sedimentation in the kettle.   Additional Notes: SilaFine is based on a special selection of commercial grade amorphous silicon dioxide, also known as silica sol, at a concentration of 30%. Silica sol is known by a few names in brewing including colloidal silica, acidified silicates, silicon dioxide, and silicic acid. Unlike some other silica sols, SilaFine is not treated with aluminum oxide. SilaFine is a pure mineral and complies with Reinheitsgebot German beer purity law. Do not freeze. Store in a cool, dry place away from direct sunlight and heat.   The recommended shelf life is 12 months from the date the package is opened.   Allergen Free GMO Free

Read more less

10 ml Single Dose for 5-7 Gallons Clarity-Ferm will prevent the precipitation of complexed polyphenols and proteins by hydrolyzing the sensitive (haze-active) polypeptides in the region where such hydrogen bonding occurs. The specificity of the enzyme ensures that no other beer parameters are affected. In addition to eliminating chill haze, Clarity-Ferm significantly reduces the gluten content in beers made with barley and wheat. A Clarity-Ferm treated beer made from barley or wheat usually tests below 20 ppm of gluten, the current international standard for gluten free.

Read more less

A heat soluble, commercial quallity extra no. 1 grade, powered Gelaitin.  This gelatin is a higher quality that is composed of high molecular weight mass proteins that carry a big positive charge. Prepare by mixing in warm water and then adding during a transfer or pump-over. The solution must be maintained at 95-104F (35-40C) when used. For WineGelatin will help to reduce cloudiness by removing colloidal substances. It has an overall tannin polishing effect, but still preserves the phenolic compounds responsible for structure (similar to fining with egg whites). Add at the rate of .2 to .35 grams per gallon.Maximum clarification and filter-ability achieved after one week. If you will be ageing the the wine, a second racking one week after the first racking is recommended. Do not leave gelatins in wine more than 30 days.For BeerUse 1/2 tsp for five gallons of beer. Dissolve gelatin into 1/4-1/2 cup of hot water to dissolve and add to beer. Wait a few days and rack off.A rough approximate of weight is 1 tsp = 1.2 grams. We highly recommend using a scale to weigh the product for an accurate dose. We do not recommend relying on these rough conversions for accurate dosage rates.   Gelatin reacts with negatively charged compounds such as tannin in wines and juices thereby reducing astringency, bitterness and color. Gelatin also reacts with negatively charged colloidal silicon dioxide to form a dense coagulum with the destabilized silica, resulting in clarification. Wine and fruit juice processors benefit from the rapid clarification and improved filterability that are a result of co-fining with Gelatin and colloidal silica. 2 ounce package

Read more less

Sparkolloid powder is a fining agent containing diatomaceous earth and alginate polysaccharide..  It is formulated to clarify wine without impacting aroma, body, or flavor.  It can be used after bentonite or carbon fining to help compact lees.  It can also be helpful in removing haze left by other fining agents. Directions: Dissolve 1 tbsp of powder in 1 cup (8 fl oz) of boiling water for 5 minutes. Add mixture to 6 US gallons of wine. Stir gently. Wait 1 week to rack and bottle. Product of Canada.

Read more less

Chitosan 1% solution is a positively charged fining agent used to remove excess tannin, dead yeast cells and floccular precipitate. 1 liter (33.8 fl.oz) Directions: Gently stir into wine, beer or alco-base at the rate of 150-200mL/HL (1.5-2 U.S.Gal/1000 U.S.Gal). For best results use in conjunction with LiquorQuik® Kieselsol (D1) or liquid gelatine. Allow 12-48 hours to clear. Bench trials are recommended. Contains: Water, chitosan (Shellfish derivative), acetic acid    

Read more less

Kieselsol (30%) Wine Finings is a negatively charged fning and useful in removing proteins and some metallic compounds. 1 liter (33.8 fl.oz) Directions: Gently stir into wine, beer or alco-base at the rate of 30-50mL/HL (0.3-0.5 U.S.Gal/1000U.S.Gal). For best results use in conjunction with LiquorQuik® Chitosan (D2) or liquid gelatin. Allow 12-48 hours to clear. Bench trials are recommended. Contains: Water, 30% Silica solution

Read more less

Wine and beer clarifier. Directions: Gently stir 2 fluid ounces into 6 gallons of finished wine or beer.  Allow 2-3 days to clear. For maximum brilliancy, wine should be filtered before bottling. Contents: Distilled water, Sulphur dioxide, tartaric acid, isinglass. 2 fluid once bottle (59ml) Product of Canada

Read more less

For crystal clear beer with firmer sediment. Removes unwanted compounds and firms up natural sediment for a crystal-clear beer with a smooth flavor. Instructions: Dissolve sachet contents into half a cup of luke warm water (not hot water). Stir until completely dissolved.  Add this solution to your beer after fermentation. Allow to settle for approximately 24hrs before racking and bottling/kegging. Ingredients: Gelatine (porcine) (sulphites). For allergens, see ingredient in bold. GMO FREE 5g package

Read more less

Clearzyme by CellarScience is an enzymatic solution to create clear beer by breaking down haze causing proteins so they cannot later bind with tannins. Because it specifically targets only haze active proteins, it has no effect on flavor, aroma or head retention. Use:Add 1/4 tsp per 5 gallons at the start of fermentation. Works best at a temperature range between 50-68°F and pH of 4-6. Additional Notes:Clearzyme is a protease, or proteolytic, enzyme that partially or totally hydrolyzes peptide bonds in protein. The resulting protein fractions are then too small to bond with the polyphenols in hops. One of the huge benefits of Clearzyme is that it removes the need to cold crash, saving time and energy. Clearzyme also breaks down the Gluten protein that causes allergic reactions. Beers made with barley and wheat that have had Clearzyme added typically show gluten levels below 20ppm. Store at temperatures under 70°F. Immediately recap bottle after each use. The recommended shelf life is 12 months from the date the package is opened.

Read more less

Use these to add clarity to your brew. Simply pour into your wort right before bottling or kegging and you're good to go.  GMO-free and derived naturally from non-animal products and is, therefore, suitable for vegetarians and vegans. Sufficient for up to 6 US gallons (23 L). Instructions: Add contents directly to your beer after fermentation. Allow to settle for approximately 24 hours before racking and bottling/kegging. Ingredients: Water, acid (malic acid), fungal chitosan, preservative (sodium metabisulphite). For allergens, see ingredient in bold. GMO FREE 20ml package

Read more less