Shanks

Chrome plated beer shank assembly Specifications: Chrome plated brass shank 4-1/8" length 1/4" bore plastic flange Does not include hose tailpiece Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Read more less

This 4" long stainless steel shank assembly has a 1/4" bore and is commonly used when converting a refrigerator to a kegerator.  The following is included in the assembly: 4" 304 stainless steel shank with 1/4" bore Locking ring Sleeve Coupling nut Lock nut Choice of either a black plastic flange or stainless steel flange  

Read more less

This stainless steel Intertap Tower Shanks will fit in any 3" diameter draft tower.  The 1/4" tailpiece is Duotight compatible and pairs perfectly with the Duotight 6.5 mm x 8 mm reducer, allowing you to quickly and easily connect 8mm OD EVABarrier draft line. Duotight fitting pictured is sold separately. Please note these shanks are not compatible with Perlick brand faucets. WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Read more less

This 3" long stainless steel shank assembly has a 1/4" bore. The following is included in the assembly: 3" 304 stainless steel shank with 1/4" bore Locking ring Sleeve Coupling nut Lock nut Choice of either a black plastic flange or stainless steel flange    

Read more less

304 Stainless Steel Cooler Wall Coupler with 5/16" Bore. Material: Stainless Steel 304 Finish: SS Polished Length: 3" Bore ID: 5/16" Thread Size:  5/8"-14 BSP

Read more less

This stainless steel shank assembly includes a back nut, plastic collar (flange), and a 3/16" tailpiece with hex nut and gasket. If desired, the barb can be removed and swapped for a different size or replaced with a Duotight x Beer Thread Adapter. This size of beer shank is a popular choice for building your own custom draft system. Typically installed in the door of a refrigerator or the wooden collar of a converted chest freezer (keezer).  Sizing Note: The shank’s listed size refers to the total length of threaded pipe. Approximately 1-1/8” are needed to account for the thickness of the finishing collar on the front and the space for the locknut on the back. Please take this into account when sizing the shank for your project. Installation Note: On a fridge there are generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 4-1/4" - Total Length (Tip to Tip) 3-1/8" - Shank Length (Without Nut & Nipple) 2-1/4" - Thread Length 1-3/4" - Pass Through Length 3/16" Nipple California Recipients: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Read more less

Manufactured by Krome Dispense, the shank is made from stainless steel 304, is 4-1/8” long and has 3/16” Bore ID.  Includes black plastic flange, coupling sleeve, snap ring, and coupling nut. Stainless steel will not impart any off-tastes and will not tarnish like brass or pit like chrome.  Stainless is a great choice for all beer, wine, cocktails, or cider. Specifications: Shank Material: 304 Stainless Steel Length: 4-1/8" Bore ID: 3/16" Thread Size: 5/8"-14 BSP Made in India.  

Read more less

Chrome plated beer shank assembly Specifications: Chrome plated brass shank 3-1/8" length 1/4" bore plastic flange Does not include hose tailpiece Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Read more less

Cap & Washer 304 Stainless Steel Use on single or series flushers to cap off for running in series For capping off all 5/8" BSP (beer thread) components.

Read more less

CO2 Bulk Head Length : 2-7/8” Long x 7/16″ 1/4" MFL Thread • This bulkhead allows you to keep your CO2 outside of the refrigerator or freezer and run your gas line through the wall without drill a large whole. The rubber gaskets included seal of the whole or the gas and gives.

Read more less

This neoprene washer seals the shank and opening on the inside a cooler wall. This prevents water and moisture from leaking into the cooler box wall.

Read more less

This 6" long stainless steel shank assembly has a 1/4" bore. The following is included in the assembly: 6" 304 stainless steel shank with 1/4" bore Locking ring Sleeve Coupling nut Lock nut Choice of either a black plastic flange or stainless steel flange

Read more less

Stainless steel shank assembly with black plastic flange.  A great option for dispensing beer, wine, cider, or kombucha.   Specifications Length: 4-1/8" Bore I.D.: 1/4" Thread: 7/8"-14 (5/8" BSP) Material: 304 stainless steel shank

Read more less

CO2 Bulk Head Length : 4” Long x 7/16″ 1/4" MFL Thread • This bulkhead allows you to keep your CO2 outside of the refrigerator or freezer and run your gas line through the wall without drill a large whole. The rubber gaskets included seal of the whole or the gas and gives.

Read more less

Flanged lock nut for beer shanks, 1-3/16" hex, 29/32-14 thread.

Read more less

Draft tower shank assembly for 2.5" diameter tower. Specifications: Shank Length: 2.25" Shank Material: Chrome plated brass Bore Size: 3/16" with 1/4" counter bore Barb Size: 1/4" Flange Material: Chrome plated plastic 

Read more less

Chrome plated beer shank assembly Specifications: Chrome plated brass shank 5 1/8" length 1/4" bore plastic flange Does not include hose tailpiece Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Read more less

Manufactured by Krome Dispense, the shank is made from stainless steel 304, is 3-1/8” long and has 3/16” Bore ID.  Includes black plastic flange, coupling sleeve, snap ring, and coupling nut. Stainless steel will not impart any off-tastes and will not tarnish like brass or pit like chrome.  Stainless is a great choice for all beer, wine, cocktails, or cider. Specifications: Material: 304 Stainless Steel Length: 3-1/8" Bore ID: 3/16" Thread Size: 5/8"-14 BSP Made in India.  

Read more less

This 304 stainless steel shank made by Micro Matic is a perfect option for serving up fresh beverages from a draft faucet.  The shank provides a bulkhead through your refrigerator door.  The end that is inside the fridge you attached your beverage line with a tailpiece and hex nut.  On the other end of the shank you attach your draft faucet. This NSF-certified shank is made of 304-grade stainless steel and is excellent for any beverage. The shank assembly uses Micro Matic's SpinStop™ technology, a simple solution that stops the spin and keeps the faucets upright. Includes the flanges, coupling nut, and lock nut necessary to attach it to the draft tower and faucet. Designed with 7/8"-14 (5/8" BSP U.S. Beer Industry Standard) straight pipe thread, this shank will work with all North American faucets. FEATURES The best in purity - only 304 stainless steel touches the product Complete assembly Connects beverage lines to the faucet Excellent for any beverage Highly durable SpinStop™ technology – keeps the faucets upright Fits on North American faucets NSF certified SPECIFICATIONS Dimensions: 3-1/8"L Bore Dimensions: 1/4" I.D. Shank thread: 7/8"-14 (5/8" BSP U.S. Beer Industry Standard)

Read more less

This matte black, stainless steel tower shank is the ideal match for the NukaTap Stealth Bomber faucet.  The 1/4" tailpiece is Duotight compatible and pairs perfectly with the Duotight 6.5 mm x 8 mm reducer, allowing you to quickly and easily connect 8mm OD EVABarrier draft line. Duotight fitting pictured is sold separately. Please note these shanks are not compatible with Perlick brand faucets. WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov    

Read more less

Chrome plated beer shank assembly Specifications: Chrome plated brass shank 2-1/8" length 1/4" bore plastic flange Does not include hose tailpiece Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Read more less

4" 304 stainless steel cooler wall coupling with 3/8" bore. Includes a two rubber washers and two lock nuts. Specifications: Material: Stainless Steel 304Finish: SS PolishedLength: 4"Bore ID:  3/8"Thread Size:  5/8"-14 BSP

Read more less

Faucet shank barrel sleeve

Read more less

This 3-1/8" shank is made of 316 surgical grade stainless steel making it more resistant to the acidic nature of wine. Includes: 3-1/8" 316 stainless steel shank with 1/4 bore Forged brass lock nut Black plastic flange Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. Made in India

Read more less

Stainless Steel Beer Faucet Shank Assembly - 2-1/8"L with 1/4" Bore. Made of 304 stainless steel, this NSF certified shank can be used for any beverage. A high-end shank is crucial to serving up perfectly fresh beverages from a draft faucet. The stainless steel beer faucet shank assembly is inserted through your refrigerator or house wall. On one end, inside the fridge, you attach the beverage lines. On the other end, the shank is connected to your draft faucet.  This Micro Matic, NSF-certified beer shank is made of 304-grade stainless steel and is excellent for any beverage. The shank assembly uses Micro Matic's SpinStop™ technology, a simple solution that stops the spin and keeps the faucets upright. Includes the flange, coupling nut, and lock nut necessary to attach it to the draft tower and faucet. Designed with 7/8"-14 (5/8" BSP U.S. Beer Industry Standard) straight pipe thread, this shank will work with all North American faucets. If you're using equipment from outside North America, you'll need to source a specialty shank.  STAINLESS STEEL SHANK FEATURES  The best in purity - only 304 stainless steel touches the product  Complete assembly  Connects beverage lines to the faucet  Excellent for any beverage  Highly durable  Micro Matic's SpinStop™ technology – keeps the faucets upright  Fits on North American faucets  NSF certified  Specifications Use:  Dispensing Wine / Cider / Beer Length:  2-1/8" Bore I.D.:  1/4" Material:  304 Stainless Steel Approval:  NSF Certified

Read more less

Beer Shank Extension Faucet Assembly - 3-1/8"L with 1/4" Bore. This Micro Matic, NSF-certified Beer Shank Extension Faucet Assembly is made of chrome-plated brass and is excellent for both home and commercial bars. The beer shank assembly uses Micro Matic's SpinStop™ technology, a simple solution that stops the spin and keeps the faucets upright. The assembly includes the flange, coupling nut, and lock nut necessary to attach it to the draft beer tower and beer faucet. Designed with 7/8"-14 (5/8" BSP U.S. Beer Industry Standard) straight pipe thread, this shank will work with all North American faucets. If you're using equipment from outside North America, you'll need to source a specialty shank. A high-end beer shank is crucial to serving up perfectly fresh beer from a draft beer faucet. The beer shank is inserted through your refrigerator or house wall. On one end, inside the fridge, you attach the beer lines. On the other end, the shank is connected to your draft faucet. Features Complete assembly Chrome-plated brass Connects beer lines to the faucet Micro Matic's SpinStop™ technology – keeps the faucets upright Highly durable Fits on North American faucets NSF certified Specifications Length: 3-1/8" Bore I.D.: 1/4" Thread: 7/8"-14 (5/8" BSP) (U.S. Beer Industry Standard) Material: Chrome Plated Brass Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Read more less

6-1/8" stainless steel shank assembly for dispensing beer, wine, cider, or kombucha.  Wall flange is a black plastic material. Specifications: Length: 6-1/8" Bore ID: 1/4" Thread: 7/8"-14 (5/8" BSP) Material: 304 stainless steel shank 

Read more less

Replacement star lock washer for dual shank.

Read more less

Attach this flange to a wall and help prevent your beer shank and faucet from rotating with a set screw. Material: Brass Finish: Brass Thread Size: 5/8”-14BSP

Read more less

Draft tower shank assembly for 3" diameter tower. Specifications: Shank Length: 2.25" Shank Material: Chrome plated brass Bore Size: 3/16" with 1/4" counter bore Barb Size: 1/4" Flange Material: Chrome plated plastic 

Read more less

3” shank for jockey box. Material: Brass Finish: Chrome Plated Brass Length: 3" Bore ID: 5/16" Thread Size: 5/8" - 14 BSP Important information: Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Read more less

Manufactured by Krome Dispense, the shank is made from stainless steel 304, is 5-1/8” long and has 3/16” Bore ID.  Includes black plastic flange, coupling sleeve, snap ring, and coupling nut. Stainless steel will not impart any off-tastes and will not tarnish like brass or pit like chrome.  Stainless is a great choice for all beer, wine, cocktails, or cider. Specifications: Shank Material: 304 Stainless Steel Length: 5-1/8" Bore ID: 3/16" Thread Size: 5/8"-14 BSP Made in India.  

Read more less

This 5-1/8" shank is made of 316 surgical grade stainless steel making it more resistant to the acidic nature of wine. Includes: 5-1/8" 316 stainless steel shank with 1/4 bore Forged brass lock nut Black plastic flange Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. Made in India

Read more less

This 4-1/8" shank is made of 316 surgical grade stainless steel making it more resistant to the acidic nature of wine. Includes: 4-1/8" 316 stainless steel shank with 1/4 bore Forged brass lock nut Black plastic flange Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. Made in India

Read more less

Shank Beer Faucet Assembly - 2-1/8"L with 1/4" Bore. Made of chrome-plated brass, this NSF certified beer shank is excellent for both home and commercial bars. A high-end shank is crucial to serving up perfectly fresh beer from a draft beer faucet. The shank beer faucet is inserted through your refrigerator or house wall. On one end, inside the fridge, you attach the beer lines. On the other end, the shank is connected to your draft faucet.   This Micro Matic, NSF-certified shank is made of chrome-plated brass and is excellent for both home and commercial bars. The beer shank assembly uses Micro Matic's SpinStop™ technology, a simple solution that stops the spin and keeps the faucets upright. Includes the flange, coupling nut, and lock nut necessary to attach it to the draft tower and faucet. Designed with 7/8"-14 (5/8" BSP U.S. Beer Industry Standard) straight pipe thread, this shank will work with all North American faucets. If you're using equipment from outside North America, you'll need to source a specialty shank.  Features Complete assembly  Chrome-plated brass  Connects beer lines to the faucet  SpinStop™ technology – keeps the faucets upright  Highly durable  Fits on North American faucets  NSF certified  Specifications Length:  2-1/8" Bore I.D.:  1/4" Material: Chrome Plated Brass Approval:  NSF Certified

Read more less

Stainless steel 3/8" BSP washer.

Read more less