Tri-Clamp Fittings
1.5'' Tri-Clamp, Stainless Steel
1.5" Stainless Steel Tri-Clamp
$8.00
2" Tri-Clamp, Stainless Steel
A standard clamp for 2" TC ports Specifications: 2" TC 304SS
$9.00
1.5'' Tri-Clamp End Cap, Stainless Steel
A 1.5" end cap for capping an unused ferrule. Stainless Steel
$4.00
1.5'' Tri-Clamp x 1/2 in MPT, Stainless Steel
This 1/2" MPT (male pipe thread) to 1.5" TC (tri-clamp) fitting is made from 304 stainless steel. Useful for converting from pipe thread to a tri-clamp connection.
$15.99
ForgeFit® Stainless Tri-Clamp Concentric Reducer - 2" x 1.5"
304 stainless steel 2" x 1.5" tri-clamp concentric reducer.
$29.99
2'' TC End Cap, Stainless Steel
Cap any 2” port with this stainless steel cap. Specifications: 2" TC 304SS
$5.00
1.5" TC x 5/8" OD Barb
Not all hose barbs are created equal! The Spike Brewing special 1.5" TC x barb fitting features a shorter profile and over sized diameter barb. The over sized barb (5/8" OD) is specially designed for 1/2" Silicone tubing. The larger size does two things: It stretches the tubing over the barb creating a tight fit requiring no hose clamps. The inside diameter of our barb is 1/2" compared to standard 1/2" barbs which have a smaller 3/8" size. This creates a full port design and will not restrict flow going through the barb. Specifications: 304SS 1.5" TC x 5/8" barb 1/2" ID
$14.00
1.5'' Tri-Clamp 90 Elbow, Stainless Steel
1.5" tri-clamp 90° elbow made of 304 stainless steel.
$24.99
ForgeFit® Stainless Tri-Clamp - 1/2 in. FPT x 1.5 in. T.C.
Adapt a 1.5" tri-clamp connection to 1/2" Female Pipe Thread (fpt). Made from 304 stainless steel.
$14.99
1.5'' Tri-Clamp x 1'' MPT, Stainless Steel
Stainless steel, 1.5" TC fitting to 1" MPT (male pipe thread).
$15.99
1.5" TC Butterfly Valve
This 1.5” TC butterfly valve can be used on Spike+ kettles. This valve has a squeeze locking/trigger handle that allows for 180 degrees of motion and 13 locking positions.The handle is a special 'shorty' style which keeps a compact design. This handle is made from extremely durable glass reinforced nylon which is much lighter than metal handles. Specifications: 1.5" TC 304SS metal components FDA silicone seals Light and durable fiber reinforced nylon handle Squeeze trigger with 13 locking positions
$65.00
All-In-One PRV
Spike Brewing's The All-In-One PRV is fully adjustable from 0-15psi which allows for use with everything from pressure fermenting to spunding to pressure transfers to a keg! Not only does the All-In-One have an adjustable pressure release but it also has a set 1psi vacuum release! Specifications: Adjustable pressure relief from 0-15psi Built in vacuum release 1.5" tri-clamp connection (2) 1/4" NPT connections for gas post and pressure gauge Pressure gauge and ball lock gas post included Sanitizer cup with drain port Quick pressure relief plunger For use on up to 3bbl fermenters User Guide Link
$150.00
ForgeFit® Stainless Tri-Clamp Barb - 1/2 in. x 1.5 in. T.C.
1.5" Tri-Clamp to 1/2" barb connection. 304 Stainless Steel
$17.99
1.5'' Tri-Clamp x 3/4'' MPT, Stainless Steel
A 1.5" Tri-Clamp to 3/4" Male Pipe Thread.304 Stainless Steel
$15.99
2" TC x QC (Quick Connect)
Out of all the ways to attach silicone tubing to your brew kettle or conical, quick connect ball lock fittings are a great option. The ease of connecting/disconnecting and cleaning is unmatched by standard hose barbs or cam locks. These fittings can easily be attached using one hand even with heavy brewing gloves. The inside diameter of this quick connect fitting is 1/2". This creates a full port design and will not restrict flow going through the barb. Specifications: 304SS 2" TC x QC 1/2" ID
$18.00
2" TC Sight Glass
The Spike Brewing engineers have totally redesigned the 2" TC sight glass from the ground up! Standard sight glasses use 4 long bolts that need to be tightened in a criss-cross pattern to get even pressure to avoid leaks. Their new design is made up of only 5 parts compared to 26 parts in a standard sight glass. No tools are required to assemble or disassemble; simply twist the knurled end cap off. The glass is also protected by the stainless guard which protects the glass from even the clumsiest brewer. The sight glass allows for direct attachment to the bottom port of our conicals. The sight glass allows for monitoring flow, color and clarity. A sight glass is also helpful when collecting yeast. Specifications: 2" TC 304 stainless steel Extra thick Pyrex glass 6” long 25% lighter than previous design **A 2" gasket and clamp will need to be purchased separately if you do not already have spares**
$75.00
Racking Arm
Another cool product the Spike Brewing engineers and in-house welders developed is their USA made racking arm. This racking arm provides 6" of total travel allowing you to draw clear wort even with the hoppiest of beers.The racking arm also incorporates a position indicator that is welded on so the orientation of the racking arm can easily be seen from the outside of the sealed conical (especially useful in closed pressure transfers). Specifications: 1.5" TC 304SS Position indicator Works with every size conical Made in the USA **A 1.5" gasket and clamp will need to be purchased separately if you do not already have spares**
$40.00
2" TC x 5/8" OD Barb
Not all hose barbs are created equal! The Spike Brewing special 2" TC x barb fitting features a shorter profile and over sized diameter barb. The over sized barb (5/8" OD) is specially designed for 1/2" Silicone tubing. The larger size does two things: It stretches the tubing over the barb creating a tight fit requiring no hose clamps. The inside diameter of our barb is 1/2" compared to standard 1/2" barbs which have a smaller 3/8" size. This creates a full port design and will not restrict flow going through the barb. Specifications: 304SS 2" TC 5/8" OD 1/2" ID
$16.00
1.5" TC x QC (Quick Connect)
Out of all the ways to attach silicone tubing to your brew kettle or conical, quick connect ball lock fittings are a great option. The ease of connecting/disconnecting and cleaning is unmatched by standard hose barbs or cam locks. These fittings can easily be attached using one hand even with heavy brewing gloves. The inside diameter of this quick connect fitting is 1/2". This creates a full port design and will not restrict flow going through the barb. Specifications: 304SS 1.5" TC x QC 1/2" ID
$17.00
2'' 90° TC Elbow
This is the same elbow featured on the bottom of the Spike Brewing conical line. Specifications: 2" TC 304SS
$21.00
1.5" TC x 5/8" OD 90° Barb
This elbow will connect to any 1.5" TC port. It features an oversized barb designed to use with 1/2" tubing. This creates a full port opening for unrestricted flow and a tight seal that requires no hose clamps. Specifications: 1.5" TC 304SS Oversized 90 degree barb for 1/2" tubing
$17.00
1.5" TC Thermowell
Spike Brewing's thermowell features a 1/4" temp probe opening on the outside which is mounted to a 1.5" TC fitting. This allows it to attach directly to the sanitary TC fitting on the conical. It also allows for an optional digital temp sensor to be attached. The probe is completely sealed from the outside. Pro Tip:The thermowell can be packed with thermal grease to help temperature response times. Specs: 1.5" TC 304SS 4” long 0.250" ID
$30.00
4" Clear TC Cap
Probably the coolest add-on for the Spike Brewing conical line! There heard many brewers who have switched from clear carboys to stainless and they only have one complaint; I can't see my beer fermenting any more! Brewers are curious by nature and we're not ones to stop that curiosity so here is our solution to that problem.Their engineers designed a clear polycarbonate (same material as bullet proof glass) cap which allows you to see inside the top of the conical when it's fermenting. This has also been tested against common brewery chemicals and has held up against the likes of PBW and StarSan. Specifications: 4" TC Clear polycarbonate material
$33.00
ForgeFit® Stainless Tri-Clamp Barb - 3/4 in. x 1.5 in. T.C.
A 1.5" Tri-Clamp to 3/4" barb fitting.304 Stainless Steel
$18.99
Blow-Off Cane
This USA made blow off cane is designed to attach to the 1.5" TC on the lid of the Spike Brewing conicals. Options:Standard: For use as a standard blow off into sanitizer 1.5" TC End: Use for a blow off into sanitzer with a barb (HERE) and/or attach the Spike Brewing pressure manifold (HERE). Specifications: 1.5" TC 304SS 15” total drop Works with every size conical Made in the USA
$45.00 - $65.00
Gas Manifold Bundle
Spike Brewing's specially designed CO2 gas manifold is designed to attach directly to the 1.5" TC port on your fermenter's lid. This manifold allows you to easily add pressure for transfers, stuck yeast dumps, purging oxygen, carbonating, etc. The manifold has 3 ports for a pressure gauge, pressure relief valve and a ball lock gas post. One part, three functions, easy assembly, easy cleaning; what more could you ask for!? Gas Manifold Bundle: Gas Manifold Pressure Gauge (Link) PRV (Link) Gas Post (Link) **Always use a 15psi pressure relief valve when pressurizing a tank**
$85.00
4" TC Clamp
A standard clamp for all of Spike Brewing's 4" TC ports Specifications: 4" TC 304SS
$15.00
1.5" TC Sight Glass
The Spike Brewing engineers have totally redesigned the 1.5" TC sight glass from the ground up! Standard sight glasses use 4 long bolts that need to be tightened in a criss-cross pattern to get even pressure to avoid leaks. Their new design is made up of only 5 parts compared to 26 parts in a standard sight glass. No tools are required to assemble or disassemble; simply twist the knurled end cap off. The glass is also protected by the stainless guard which protects the glass from even the clumsiest brewer. The sight glass allows for direct attachment to the bottom port of our conicals. The sight glass allows for monitoring flow, color and clarity. A sight glass is also helpful when collecting yeast. Specifications: 1.5" TC 304 stainless steel Extra thick Pyrex glass 5” long 25% lighter than previous design **A 1.5" gasket and clamp will need to be purchased separately if you do not already have spares**
$65.00
CIP Ball
Another cool innovation from the Spike Brewing engineers; their low pressure CIP ball! They wanted to design a CIP ball that didn’t require home brewers to purchase another pump if they already owned one. Small brewery pumps, like Chugger and March pumps used on our Spike System, are very common for most home brewers. However, most CIP balls require a much larger pump to work properly. This CIP ball was specifically designed to work with the more common 7GPM pumps. It has also been tested with larger sump pumps which are also commonly used for CIP applications. Spike Brewing also designed the CIP ball to fit through a 1.5" TC port. This allows for quick install of the CIP ball after fermentation. This works especially well with cleaning the temp control coil. They recommend a 5-10min CIP with 160F brewery wash to give a nice and shiny FLEX or conical fermenter. Pro Tip:If you do not have a FLEX+ lid with 1.5" TC port you can attach the CIP ball to the secondary port of your FLEX after an initial dump and rinse. Then simply CIP as described above! Specifications: 1.5" TC x 1.5" TC 304SS Low flow design
$70.00
1.5'' Tri-Clamp Ferrule, Stainless Steel
1.5" Tri-Clamp Ferrule304 Stainless Steel1-13/32" ID1-3/32" Length
$8.95
Stainless Tri-Clamp Extension Tube (Spool) - 2 in. x 10 in.
304-type stainless steel tri-clamp extension tube with 2" TC ends and is 10" in length.
$29.99
ForgeFit® Stainless Tri-Clamp End Cap - 3 in.
End cap for 3" tri-clamp fittings. Made from 304 stainless steel.
$6.99
3" Tri-Clamp, Stainless Steel
The most popular choice for sanitary connections, tri-clamp fittings are widely used in the food & beverage industry due to their ability to be cleaned in place. Tri-clamps join two fittings together without any nooks or crannies for contaminants to hide. Use anywhere you want to ensure a sanitary connection. 3" tri-clamp Made from 304 stainless steel
$10.99
4" TC Cap
Cap any 4” port with this stainless steel cap. Specifications: 4" TC 304SS
$16.00
1.5'' Tri-Clamp x 1'' FPT, Stainless Steel
Connect a 1" female pipe thread fitting (FPT) to a 1.5" Tri-Clamp (TC) fitting with this stainless steel piece of hardware.
$19.99
TC Sample Valve
Spike Brewing conicals come equipped with this 100% sanitary sample valve. Taking samples has never been so easy; simply twist the valve handle to slowly draw out a sample from your fermenter for a gravity reading. The one downside is you might end up with lower final volumes due to how easy it is to take taste tests ;)Specifications: 1.5" TC 304SS FDA Silicone seals 3/8” barb
$35.00
