Draft Supplies

562 products


  • CO2 Cylinder Exchange CO2 Cylinder Exchange

    CO2 Cylinder Exchange

    16 in stock

    Does not ship.  In store pick up only. Swap out your empty CO2 cylinder with a full one. Tanks will be swapped with the same material as brought in. Tanks must be aluminum and certification no older than 5 years. Cylinders that are out of compliance will not be accepted.  

    16 in stock

    $25.00 - $42.00

  • 3/16" ID Vinyl Draft Tubing 3/16" ID Vinyl Draft Tubing

    3/16" ID Vinyl Draft Tubing

    512 in stock

    3/16" ID vinyl beverage and gas tubing. Accuflex Bevlex 200 PVC Tubing is used for draft beer transfer and BIB soft drink applications. Its special dual durometer construction combines a low extraction inner contact surface with a flexible outer layer to provide excellent kink resistance and taste protection. NSF-51 Listed. Inside Diameter (ID): 3/16" Outside Diameter (OD): 7/16" Clamp Size: 13.3mm Available in clear or black, by the foot or 100' roll. Prop 65 Warning: This product contains phthalates (DEHP, DBP, BBP), a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.

    512 in stock

    $1.20 - $79.99

  • Hose Gear Clamp - Fits 1/4'' to 5/8'' OD Tubing

    Hose Gear Clamp - Fits 1/4'' to 5/8'' OD Tubing

    128 in stock

    Stainless steel hose clamp for 1/4" to 5/8" OD tubing.  Commonly used with 3/16" ID and 5/16" ID draft tubing.

    128 in stock

    $1.30

  • 5/16" ID Vinyl Draft Line Tubing 5/16" ID Vinyl Draft Line Tubing

    5/16" ID Vinyl Draft Line Tubing

    379 in stock

    5/16" ID red or clear vinyl beverage and gas tubing.  The red color is generally used for gas line. Accuflex Bevlex 200 PVC Tubing is used for draft beer transfer and BIB soft drink applications. Its special dual durometer construction combines a low extraction inner contact surface with a flexible outer layer to provide excellent kink resistance and taste protection. NSF-51 Listed. Inside Diameter (ID): 5/16" Outside Diameter (OD): 9/16" Clamp Size: 15.7mm or 17mm Prop 65 Warning: This product contains phthalates (DEHP, DBP, BBP), a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.  

    379 in stock

    $1.20 - $98.00

  • Hex Nut Washer

    Hex Nut Washer

    364 in stock

    Flat neoprene washer for use with beer shanks or Sanke couplers.  Pairs up with a tailpiece and hex nut (or wing nut).

    364 in stock

    $0.75 - $6.49

  • Ball Lock Disconnect (Liquid) - 1/4'' MFL

    Ball Lock Disconnect (Liquid) - 1/4'' MFL

    7 in stock

    This Ball Lock Disconnect (Liquid) by CM Becker provides a secure liquid flow with a durable plastic coupler and 1/4" MFL male flare thread. Its reliable seal and robust construction make it an ideal choice for Cornelius kegs.

    7 in stock

    $7.29

  • Ball Lock Disconnect (Gas) - 1/4'' MFL

    Ball Lock Disconnect (Gas) - 1/4'' MFL

    47 in stock

    CM Becker plastic ball lock gas in coupler with 1/4" MFL.  Quick disconnect for ball lock Cornelius (Corny)-type kegs.The 1/4 inch male flare (MFL) threaded fittings make it easy to connect a variety of hardware pieces and connectors. MFL fittings are more versatile than barbed fitting, but they must be tightened down properly or they can leak. Barbed fittings are also available.

    47 in stock

    $7.29

  • Flare Swivel Nut & 5/16" Swivel Stem

    Flare Swivel Nut & 5/16" Swivel Stem

    62 in stock

    Swivel nut and stem set. Used to attach 5/16" ID draft or CO2 line to corny keg disconnects. Barb Specifications: Material: Stainless Steel Size: 5/16" Nut Specifications: Material: Brass Finish: Chrome Plated Brass Size: 1/4"

    62 in stock

    $2.25

  • 5lb Co2 Aluminum Cylinder - Filled

    5lb Co2 Aluminum Cylinder - Filled

    8 in stock

    Does not ship.  In store pick up only. Filled 5 pound aluminum CO2 cylinder. Will dispense approximately 9 five gallon kegs before needing to be refilled.     Dimensions: 18" Tall x 5.25" wide.      These are used cylinders that have been filled from a local vendor.      

    8 in stock

    $101.99

  • Flare Swivel Nut with 1/4'' Stem

    Flare Swivel Nut with 1/4'' Stem

    231 in stock

    Swivel nut and stem set. Used to attach 3/16" ID or 1/4" ID draft line to corny keg disconnects. Barb Specifications: Material: Stainless Steel Size: 1/4" Nut Specifications: Material: Brass Finish: Chrome Plated Brass Size: 1/4"

    231 in stock

    $2.25

  • Hex Nut for Tailpiece

    Hex Nut for Tailpiece

    46 in stock

    Nickel Plated Brass Hex Nut, 1" (Beer Thread, 29/32-14).  Used to connect a tailpiece to a sanke coupler or a shank. You may also need a tailpiece or hex nut washer. California Proposition 65 Warning: This product may contain a chemical known to the State of California to cause cancer, or birth defects, or other reproductive harm.

    46 in stock

    $1.99

  • Micro Matic American "D" System Keg Coupler Micro Matic American "D" System Keg Coupler

    Micro Matic American "D" System Keg Coupler

    26 in stock

    The "D" system keg coupler, also known as American Sankey, is the most common system available in the USA. It is used by all the major North American breweries as well as most craft breweries. The keg coupler connects to the keg valve, "tapping" the keg. Both the gas line from the CO2 tank/regulator and the beer hose to the beer faucet attach to the coupler. Features Chrome plated brass body Tin-nickel plated probe Short handle is ideal for the smaller diameter 1/6 kegs Specifications System: "D" (American Sankey) Body Material: Chrome plated brass Probe Material: Tin-nickel alloy plated Handle Style: Lever Gas Port: 3/8" O.D. Barb (To fit 5/16" I.D. Gas Hose) Beer Port: 7/8"-14 Thread (U.S. Beer Industry Standard) Height: 3-13/16" Manufacturer: Micro Matic ⚠️WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. www.P65Warnings.ca.gov

    26 in stock

    $36.99

  • O-Ring Kit for Corny Kegs

    O-Ring Kit for Corny Kegs

    10 in stock

    Includes O rings for dip tubes, posts, and lid.

    10 in stock

    $4.00

  • Beer Line Assembly - Ball Lock to Hand Held Faucet

    Beer Line Assembly - Ball Lock to Hand Held Faucet

    1 review

    14 in stock

    Beer line assembly for your corny keg hook up. We build the assembly, you just need to secure the the ball lock disconnect to your corny keg. For outdoor dispensing we recommend selecting the black vinyl tubing. This assembly includes: 5' of 3/16"" ID vinyl draft tubing CMB Liquid ball lock disconnect with 1/4" flare fitting 1/4" swivel nut with 1/4" stainless steel hose barb stem 13.3 stepless hose clamp Plastic hand held faucet

    14 in stock

    $21.99

  • Ball Lock Disconnect (Liquid) - 1/4'' Barb

    Ball Lock Disconnect (Liquid) - 1/4'' Barb

    38 in stock

    Liquid coupler for cornelius keg with 1/4 barb.

    38 in stock

    $7.29

  • Hand Held Faucet

    Hand Held Faucet

    20 in stock

    Black plastic handheld faucet with a barb for 3/16” or 1/4” ID tubing.  Also known as a cobra tap or picnic tap.

    20 in stock

    $4.49

  • Keg Lube

    Keg Lube

    16 in stock

    Keg lube is a food grade lubricant for rubber and plastic parts. Using keg lube will extend the life of the o-rings on your kegs preventing cracks from developing and leaks from occurring. 1 ounce tube.

    16 in stock

    $3.99

  • Duotight 8 mm (5/16 in.) x 1/4 in. Flare Duotight 8 mm (5/16 in.) x 1/4 in. Flare

    Duotight 8 mm (5/16 in.) x 1/4 in. Flare

    50 in stock

    This Duotight fitting with 1/4" Flare is perfect for flared gas and beverage ball lock and pin lock disconnects.  This Duotight fitting is compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Note: Ball lock fitting and regulator not included. 

    50 in stock

    $4.29

  • Ball Lock Disconnect (Gas) - 3/8'' Barb

    Ball Lock Disconnect (Gas) - 3/8'' Barb

    11 in stock

    This Ball Lock Disconnect (Gas) connector is the perfect solution for cornelius kegs. Made by CM Becker plastic, this 3/8'' barbed connector is designed for a long-lasting and reliable connection.

    11 in stock

    $8.29

  • Used - 5 Gallon Keg, Ball Lock Used - 5 Gallon Keg, Ball Lock

    Used - 5 Gallon Keg, Ball Lock

    3 in stock

    Used dual handle 5 gallon ball lock Corny keg with new O-ring gaskets. Pressure tested.

    3 in stock

    $75.00

  • Hose Tailpiece For 3/16'' ID Tubing

    Hose Tailpiece For 3/16'' ID Tubing

    1 in stock

    3/16" Hole, 1/4" Barb Shank Tailpiece Shank Tailpiece for 3/16" ID HoseNickel Plated

    1 in stock

    $2.00

  • Universal Poppet

    Universal Poppet

    43 in stock

    Universal poppet valve fits most kegs.

    43 in stock

    $3.99

  • Ball Lock Gas Line Assembly

    Ball Lock Gas Line Assembly

    31 in stock

    Gas line assembly for your corny keg hook up. We build the assembly, you just need to secure the open end  of the tubing to the 5/16" barb on your regulator with the gear hose clamp and the ball lock disconnect to your corny keg. This assembly includes: 4' of 5/16" ID red vinyl tubing Gas ball lock disconnect with 1/4" flare fitting 1/4" swivel nut with 5/16" stainless steel hose barb stem 15.7 stepless hose clamp Stainless steel gear hose clamp

    31 in stock

    $16.99

  • Multi Draft Tool with Duotight Remover

    Multi Draft Tool with Duotight Remover

    2 in stock

    The KOMOS multi draft tool is a handy and inexpensive tool that every homebrew kegger should have in their toolbox.  It's really useful for the most common fittings that you are likely to see in a home draft system, and Duotight users will appreciate the handy removal tool for 8 mm and 9.5 mm fittings. Functions: CO2 Regulator Nut Spanner Shank Hex Nut Spanner Faucet Coupling Ring Pin Wrench Flare Swivel Nut Spanner 8 mm Duotight Removal 9.5 mm Duotight Removal Bottle Opener

    2 in stock

    $4.99

  • 857c41bc36ba2d1be4e16d321e3f15b7%2FStainless Steel Stepless Oetiker Clamp.png

    13.3mm Stepless Hose Clamp - For 3/16" ID Vinyl or 3/8" ID Poly

    547 in stock

    13.3mm Stainless Steel, Stepless Oetiker Clamp This style of clamp tightens in an exact circle, making them ideal for use with draft lines.  For 3/16" ID Vinyl or 3/8" ID Poly Hose Stepless Clamp Tool sold separately.

    547 in stock

    $0.75 - $12.99

  • Black Faucet Handle

    Black Faucet Handle

    43 in stock

    Black plastic tap handle for kegerator faucets.

    43 in stock

    $4.49

  • Liquid Ball Lock Post for Sanke Coupler

    Liquid Ball Lock Post for Sanke Coupler

    6 in stock

    Adapt your sanke style coupler to accept a ball lock coupler with this stainless steel fitting.   Liquid ball lock post for sanke coupler.   Stainless Steel

    6 in stock

    $13.69

  • Gas Ball Lock Post for Sanke Coupler

    Gas Ball Lock Post for Sanke Coupler

    7 in stock

    Adapt your sanke style coupler to accept a ball lock coupler with this stainless steel fitting.   Gas ball lock post for sanke coupler. Stainless Steel.

    7 in stock

    $13.69

  • Intertap Stainless Steel Faucet

    Intertap Stainless Steel Faucet

    14 in stock

    In normal rear-sealing faucets the entire faucet has to drain of beer. Intertap faucets are forward-sealing which keeps beer in it so the inside doesn't have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavors transfering to your beer while you pour.Other 'perl' forward sealing faucets use a floating o-ring, which is just as sanitary but requires the o-ring to move inside the faucet body in order to seal correctly. This can become a problem as the faucet ages. Intertap faucets use a sliding shuttle that guides the o-ring into the perfect position every time. The threaded spout easily unscrews from the faucet and can be replaced by a growler filler or stout spout quickly and easily. Pour a pint and then fill a growler in no time at all.304 Stainless Steel construction.

    14 in stock

    $35.99

  • EVABarrier Double Wall Draft Tubing - 4 mm ID x 8 mm OD

    EVABarrier Double Wall Draft Tubing - 4 mm ID x 8 mm OD

    12 in stock

    EVABarrier double wall tubing is an excellent choice for all draft dispensing applications. The inner barrier is an excellent gas barrier, keeping oxygen out and CO2 in. The inner wall is also extremely smooth to prevent bacteria and other microbes from attaching to the inside surface. The outer barrier gives the tubing a decent stiffness while still remaining pliable. This makes EVA Barrier remarkably kink resistant and the perfect choice for use with Duotight, John Guest, and other push-in fittings.   The 4 mm (5/32") ID size is perfect for home draft applications where only a short beverage line is needed. It is recommended to use 5-6 ft. per line for adequate flow resistance.   Specifications: Inner Diameter - 4 mm (5/32") Outer Diameter - 8 mm (5/16") PVC, BPA , and Plasticizer Free* Outer wall prevents oxidation and CO2 loss Smooth inner wall prevents microbial growth build-up   *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects.

    12 in stock

    $5.49 - $47.29

  • Faucet Spanner Wrench - Red Handle

    Faucet Spanner Wrench - Red Handle

    1 in stock

    A faucet spanner wrench is a must have tool for all kegerator owners.  This wrench with the red coated handle is gentler on the hands when using.

    1 in stock

    $5.99

  • O-Ring - Keg Post

    O-Ring - Keg Post

    448 in stock

    Replacement o-ring for Cornelius keg post.

    448 in stock

    $0.50

  • Faucet Body Coupling Gasket

    Faucet Body Coupling Gasket

    212 in stock

    Faucet body gasket Replacement gasket that seals between a draft faucet and shank.

    212 in stock

    $0.99 - $7.50

  • KOMOS Dual Gauge Co2 Regulator

    KOMOS Dual Gauge Co2 Regulator

    3 in stock

    The KOMOS industrial gauge regulator aims to be the last regulator you'll ever need. Large body and precision diaphragm provide high flow rates, and pressure settings are quickly and easily dialed in the with hand knob. The pressure gauges are made from thick stainless steel and come with rubber bumpers for an extra layer of protection. Triple-scale dial faces read in psi, bar, and kPa. Includes a 1/4" flare fitting with barbed outlet. Also included is a Duotight adapter which allows the regulator to be easily used with EVABarrier draft tubing. Features: 0 - 60 PSI Strong, robust design Highly accurate precision diaphragm Easily adjusted by hand 1/4" flare fitting with barbed outlet Duotight adapter fitting included for use with EVABarrier draft tubing Heavy duty steel gauges with rubber bumpers 65 psi PRV M6 mounting screw holes Made in accordance with AS 4267  

    3 in stock

    $59.99

  • 3/16" Stainless Steel Tailpiece (304)

    3/16" Stainless Steel Tailpiece (304)

    75 in stock

    3/16" ID stainless steel tailpiece commonly used for 3/16" ID draft tubing. 304 Stainless Steel  

    75 in stock

    $3.49

  • Floating Dip Tube

    Floating Dip Tube

    2 in stock

    When using the Torpedo Buoy™ floating dip tube, you can draw the clearest beer possible from the first pint to the last. Included is a 3" metal dip tube, 23.5" length of 1/4" ID silicone tubing, and stainless steel ball float. This floating dip tube is compatible with any ball lock or pin lock homebrew keg. Sized for 5-gallon kegs, but it can be shortened for use with 1.5 or 2.5-gallon kegs. Instructions

    2 in stock

    $17.99

Draft Supplies

Login

Forgot your password?

Don't have an account yet?
Create account