Manifolds
2-Way Modular Gas Manifold
This modular gas manifold will allow you split one CO2 line to multiple ones. Each line can be turned off individually without affecting the flow to other kegs. Each ball valve contains a check valve that ensures no beer or gas can flow between the two kegs. The barbs are all 5/16" which is standard for gas line in the beer industry. If later, you decide to add an additional keg this manifold can be expanded using the Add On Assembly.
$29.99
4-Way Modular Gas Manifold
This modular gas manifold will allow you split one CO2 line to four of them. Each line can be turned off individually without affecting the flow to other kegs. Each ball valve contains a check valve that ensures no beer or gas can flow between the two kegs. The barbs are all 5/16" which is standard for gas line in the beer industry. If later, you decide to add an additional keg this manifold can be expanded using the Add On Assembly.
$48.99
3-Way Modular Gas Manifold
This modular gas manifold will allow you split one CO2 line to three of them. Each line can be turned off individually without affecting the flow to other kegs. Each ball valve contains a check valve that ensures no beer or gas can flow between the two kegs. The barbs are all 5/16" which is standard for gas line in the beer industry. If later, you decide to add an additional keg this manifold can be expanded using the Add On Assembly.
$38.99
Manifold Add On Assembly
Use this add on assembly to expand your existing modular gas manifold. Includes a shut off check/ball valve, one tee and a connecting nipple.
$13.99
KOMOS® Aluminum Gas Manifold - 1/4" Flare
The KOMOS® gas manifold features 1/4" flare gas inlet and check valves for much more flexibilty when choosing your draft line. Use 1/4" or 5/16" gas line with the appropriate Flare Fitting Set (1/4 Swivel Set or 5/16 Swivel Set), or use EVABarrier Draft Tubing with the appropriately sized Duotight fitting (8mm Flare Fitting or 9.5mm Flare Fitting). The check valves can also be replaced with a Gas Ball Lock Post Bulkhead, allowing for the use of a gas-in ball lock jumper line as a quick connect option. If more than 4 outlets are needed, join multiple manifolds together with this 1/4" Gas Manifold Nipple. Features: 1/4" Flare connections 1/4" BSP ball valves Rated to 100 psi Wall mount holes Made from aluminum, brass, and stainless steel Manifold Overall Length 2-Way: 5.25 inches 3-Way: 7.25 inches 4-way: 9.25 inches The above measurements are from the tip for the brass flare inlet to the plug on the opposite end. Each manifold measures approximately 3.5" from the mounting holes to the tip of the valve.
$24.99 - $34.99
Gas Manifold Nipple
1/4" brass nipple for expanding a modular gas manifold. Right hand thread.
$2.99
Co2 Gas Regulator Y Fitting, Chrome Plated Brass
Co2 gas regulator wye fitting for adding an additional shutoff. Specifications Material: Brass Finish: Chrome Plated Brass Thread Size: 1/4MPT x 1/4 FPT x 1/4 FPT Warnings / Instructions Important information: Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
$7.99
In-Line Check/Ball Valve
5/16" barbed in-line check valve shut off. Easy to install on gas lines to shut off CO2 when the line is not in use. The internal check flow valve prevents liquid from traveling past to help protect your regulator.
$16.99
4-Way Gas Manifold with Pressure Relief
This manifold allows you to serve four beers at the same pressure. It’s made from brass and features a pressure relief valve, shut offs with check valves, 3/8” inlet and outlet barbs, and a 304 stainless mounting bracket.
$44.99
Brass Air WYE, 1/4NPT, (2) 1/4NPT
"Y" fitting body, 1/4"NPT (male) x (2) 1/4"NPT (female), no outlet fittings
$12.99
3-Way Beer Manifold
Material: Stainless Steel 304 Mounting Bracket: Integrated Inlet Connection: 1/2" O.D. Barb Outlet Connection: 7/8" - 14 (5/8" BSP)
$69.95 $39.99
3-Way Gas Manifold
3-way horizontal gas manifold without safety pressure release. 3/8" barbed inlet (3) 5/16" barbed shut-offs Shut-offs do not include check valves Aluminum body
$44.99
6-Way Modular Gas Manifold
This modular gas manifold will allow you split one CO2 line to six of them. Each line can be turned off individually without affecting the flow to other kegs. Each ball valve contains a check valve that ensures no beer or gas can flow between the two kegs. The barbs are all 5/16" which is standard for gas line in the beer industry. If later, you decide to add an additional keg this manifold can be expanded using the Add On Assembly.
$69.99