Newest Products

A great container to boil and store wort for making a starter for your yeast. Borosilicate glass. Cap will withstand 140c(284f).

Read more less

Pop Tops are 16 ounce swing top style bottles from Pop Cultures.  Pop Tops are the perfect choice for cider, kombucha, or any other beverage.  A case includes 12 bottles with swing tops included.  These bottles are also fully compatibly with standard crown bottle caps (not included). Sold by a case of 12 bottles with swing tops included. Resealable, reusable, and recyclable. Bottles rated to 100 PSI  

Read more less

A top fermenting yeast, Voss Kveik offers fast fermentation at very high temperatures while retaining a neutral flavor character with subtle citrus fruit notes. M12 Kveik Yeast is suitable for a range of styles from Norwegian Farmhouse Ales to Pale Ales and IPAs. M12 Kveik Yeast is a single culture yeast that uses an isolate of the most important single strain in the naturally mixed culture 'Voss' Kveik blend. This member of Kveik family of yeast is so called because it originates from Voss in Norway, where the culture has been carefully maintained by Sigmund Gjernes since the 1980s. Each Kveik yeast has its own specific profile, but they are all known for their ability to ferment across a wide temperature range, include temperatures as high as 40°C (104°F)! Furthermore, unlike most familiar farmhouse style yeasts, which are often phenolic - Kveik ferments with an exceptionally clean taste profile, with just a delicate hint of fruity esters. These qualities, along with their interesting backstory, have meant Kveik yeasts have become the exciting new trend in the craft brewing world, especially for brewing IPAs - the Voss Kveik being perfect for American style IPAs on account of its restrained orange-citrus flavour profile. However, their use is potentially even more exciting for the home user, especially those in warmer climes, due to the reduced reliance on cool ambient fermentation temperatures.Attenuation: High (77-82%)Flocculation: Very High Usage Directions: Sprinkle contents directly onto a maximum of 23 L (6 US Gal) of wort. Suitable to ferment 20-40 °C (68-104 °F) but for optimal results ferment at 30-40 °C (86-104 F).Storage Recommendations: Store in the fridge.10g Sachet.

Read more less

#4 Rubber Stopper   Top Diameter: 1" Bottom Diameter: 3/4" Length: 1"

Read more less

Buon Vino stoppers have a longer taper to help produce a better fit and a snug seal, and a lip which prevents them from falling into your container. Available with a 3/8 inch hole for an airlock, or solid with no hole. #8-9 (medium) size is recommended for medium size barrels and 9 gallon demijohns.

Read more less

This airlock is a good choice for both wine and beer. Fill approximately half-way with a water/sanitizer mixture. The water acts as a environmental barrier keeping airborne contaminants out of your batch, but still allowing gasses to escape the fermentation. Holds approximately 0.67 fl oz (20 ml) Chamber - 1-5/8" tall x 1-3/4" diameter Stem - 1-1/4" long Stopper not included

Read more less

Helios™  hop pellets are a newer high alpha bittering hop and has described as having a muted aroma with clean, soft accents. Specifications: Brewing usage: Bittering Aroma: Resinous, Spicy, Herbal Alpha Acids: 18.0 - 21.0 Beta Acids: 3.5 - 4.5 Total Oils: 1.5 - 2.0% Co-Humulone % rel.: 26 - 29

Read more less

Replacement check valve for Micro Matic party pumps.  For Micro Matic HP-100, 300, 500, 700 & 900 series pumps.

Read more less

Replacement piston rod 0-ring for the Micro Matic 4" and 8" chrome pumps. Dimensions: O.D. 1-7/16" I.D. 1-3/16" x W. 1/8"

Read more less

D system keg pump has a chrome body and is perfect for home and party draft beer dispensing. "D" system is the most common system available in the US, also known as American Sankey. Features: Short stroke pump for quick pumping! Lever handle for easy keg tapping Forged brass body for durability Short handle is ideal for the smaller diameter 1/6 kegs. View Cleaning Features  

Read more less

#13 tapered rubber stopper. Top Diameter: 2 5/8" Bottom Diameter: 2 3/8" Length: 1"

Read more less

Capri’s juicy ester aromatics, tropical flavors, and bright citrus notes emphasize the desirable qualities from the two popular parent strains: A38 Juice & A43 Loki. Capri is a small-celled warrior fit to bring out the best of your IPAs! Introducing Capri, an experimental Saccharomyces cerevisiae strain created in Imperial Yeast's lab by directing brewing yeast through their idle sexual cycle via fungal sporulation, designed to explore the natural bio-diversity normally off limits to brewing yeast. The Juicy ester aromatics of A38 Juice fuse with the tropical flavors and bright citrus notes of A43 Loki creating a delightfully pleasant drinking experience.  Capri is prone to stay in suspension when in large tank vessels, volatilize sulfur early, form a tight yeast cone harvest. Try dry hopping additions with this strain for a more active fermentation. This yeast strain is not a genetically modified organism (GMO). Specifications: Temperature Range: 68–86F (20–30C) Flocculation: Medium Attenuation: 68-74% Alcohol Tolerance: 10% We ship all liquid yeast with an ice pack and insulated bubble envelope. Beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.

Read more less

This FLOJET in-line water pressure regulator with built-in check valve reduces inlet water pressure to a safe level for use with all Glass Rinser Trays. Specifications: Pressure Regulator comes complete with removable, cleanable inlet screen. Unit is pre—set from factory at 15 PSI.  NSF stardard-18 garden hose x garden hose with 1/2 npt adaptors and 3/8" hose barbs. Kit Model: 01750352C

Read more less

Micro Matic is committed to producing the best quality gas equipment in the industry. Made right here in the USA, every regulator that leaves Micro Matic's plant goes through a rigorous quality control testing process ensuring accuracy, reliability and optimal performance in the market. Their new Premium Plus regulator offers industry leading features, providing a better performing, better quality and better tested regulator. Easily convert any primary CO2 regulator into a dual product primary regulator. Premium Plus Add-On CO2 regulator is ideal for dispensing two draft beers that require different CO2 pressures. The add-on module type design makes expansion easy. Features: Built for durability: forged brass body, accurate machining, chrome plated finish Premium quality metal gauges for durability Factory leak tested at 2900 PSI Tamper evident adjustment screw and bonnet One piece heavy duty seat capsule Durable built in long lasting solid nylon inlet seal Enlarged CO2 port for high volume Constant pressure supply at high output flow rates Adjust pressure from 0 to 60 PSI Safety relief valve releases at 55–65 PSI Made in USA For home or commercial use Specifications: Performance: 1 Pressure / 1 Product Output Pressure Gauge: 0-60 PSI, for accurate product pressure Outlet Barb: 3/8" O.D. (To fit 5/16" I.D. Gas Hoses) Pressure Relief Valve: Safety Pressure Relief Valve Releases at 55-65 PSI Capacity: SCFM 3.5 Max Installation: CO2 tank mount (CGA-320 threads) WARNING:This regulator must be connected to a primary CO2 regulator. The threaded high pressure port on the left hand side is designed for a tank mount (primary) regulator. Not connecting a regulator to this exposed port will allow high pressure CO2 to vent straight through the regulator body. Batteries with more then two regulators should be wall mounted. This is done with the addition of wall brackets for mounting and a high pressure CO2 hose for connection to the gas cylinder. To prevent your gas cylinder from falling over and damaging the regulators, be sure the cylinder is always secured in an upright position with either a chain or strap. Additionally, be sure the cylinder is located away from any sources of heat.

Read more less

  Take temperature readings instantly and from a safe distance with this infrared thermometer gun. Use it to check how close you are to the hot break before your boil, or measure the temp of your empty mash tun and grains to help predict temperature loss when you add strike water and mash in. Dual lasers is an important feature when choosing infrared thermometers because it allows for much higher accuracy. When measuring an object, a dual laser thermometer gun will help you greatly in finding the convergence point of the measured target and spot ratio. This can only be achieved with a dual laser unit. Features: Double Laser pointer for higher accuracy Simple one-handed operation Laser ON/OFF switch Low battery indication LED backlight Reads in °F / °C Automatic shutdown after 15 seconds Display hold, Scan function FCC, CE, ROHS Certified Notes: 1. When using this product to measure temperature, consider the ratio between the distance (the length from the product to the measured object) and the size of the measurement area, referred to as the object distance ratio. When the distance between the product and the measured object increases, the measurement area will increase accordingly. 2. If you want to use boiled water to measure the unit's accuracy, do not allow smoke or water vapor to contact the temperature sensing area, and keep the measurement angle at 45 ~ 60 degrees.

Read more less

Melba™  hop pellets are typically used as an aroma hop and have described as having passionfruit, grapefruit, citrus, and summery characteristics. Grown in Australia. Specifications: Brewing usage: Aroma Aroma: Passionfruit, Grapefruit, Citrus, Summery Characteristics Alpha Acids: 7.0-10.0% Beta Acids: 2.5-5.0% Total Oils: 2.0-4.0% Co-Humulone % rel.: 25-35

Read more less

Size: 28x42cm/11"x16.5" 20w heat wrap with adjustable power knob. Can be used as a pad/mat or as a wrap.

Read more less

Make a really small and useful keg system out of PET plastic bottles. Great for taking beer to a party or making your own micro/portable/mini keg system. PCO 1881 threading on all ends. Tee fitting only. Does not include Carbonation Caps or PET growler.

Read more less

The Nukatap Counter Pressure Bottle Filler is a great way to fill bottles directly from your taps without compromising your kegged beer’s flavor, aroma or carbonation levels. It's completely made from stainless steel with no aluminum or brass components. This enables you to use a wide range of chemicals for cleaning this device without the risk of damaging the device or accessories. It's very compact and will fit any tap with 10.0 mm inner diameter spout/nozzle or with a 3/8" thread. To use this device simply connect CO2 gas line to the filling unit and away you go. The integrated counter pressure relief valve gives you good control of the counter pressure and thus the filling speed. How fast the bottle can be filled without too much foaming depends on CO2 level, beer temperature and bottle temperature. This cannot be used with taps with a vent hole but will fit pretty much all forward-sealing taps on the market such as the Nukatap SS, Nukatap FC, Intertap, Perlick 600-series and other brands. This unit is designed to fill multiple sizes of beer bottles up to 500 mL thanks to the telescopic filling stem. We recommend starting with it fully extended, then insert the stem till your at the bottom of the bottle, purge the bottle with CO2, then press the stem all the way in to form a seal on your bottle. This unit comes complete with a wide range of accessories including carbonation caps so you can quick disconnect your beer line, Duotights so you can fit a beer line to the unit and other usefull fittings you might need. Includes: All stainless steel counter pressure filler Push-in spout compatible with forward-sealing faucets (2) 8 mm Duotight adapters for filler and NukaTap spout (2) Ball Lock Post Adapters (Red / Yellow) 19.5" length of 8 mm OD x 5 mm ID EVABarrier tubing

Read more less

If you've been looking to step up from fermenting in plastic buckets or carboys, this is an excellent choice for your next fermenter. Stainless steel is a much better option than glass or plastic, as it is extremely easy to clean and virtually lasts forever. There's also much less chance of contamination as stainless doesn't scratch like plastic. Over time, you'll get scratches in plastic fermenters from normal wear and tear, creating microscopic havens for bacteria. Meanwhile, glass carboys are always at risk of breaking which is something you will never have to worry about with stainless steel. The Bucket Buddy represents a great value for a stainless fermenter in this size. Another advantage over carboys and plastic buckets is the domed base inside the fermenter which is great for yeast flocculation when fermentation is complete. The included racking arm will make it easy to transfer out every last drop of beer while leaving the yeast cake undisturbed. The entire racking arm and ball valve assembly is weldless, which means you can remove the assembly to clean and sanitize it between batches. You can even boil the assembly for added assurance that it's been sterilized. This model has an integrated (concealed) 36-watt heating element. No need to worry about accessories such as heating belts and external temperature controllers. This stainless steel fermenter will keep your yeast at optimal temperature making it the ideal option for cold climates. To help maintain a steady temperature, the Bucket Buddy pairs well with either the BrewZilla Neoprene Jacket or the FermZilla Insulating Jacket. For cooling, you can place the fermenter in a dedicated refrigerator or drill into the lid to install a Temp Twister Cooling Coil. A temperature controller probe can then be taped to the side of the fermenter. This unit comes standard with silicone tubing to transfer from the ball valve to your bottles or cans, as well as a stopper and airlock for the domed lid. Specifications: Capacity: 35L Brimful Body Material: 304 Stainless steel Outlet Valve Type: Stainless steel, nylon bushings, silicone seal and stainless rotating rack arm. Thread on tap is 1/2" Lid: 304 Stainless steel Display: Digital temperature display Heating: 36 Watt Concealed Element Stopper & airlock included Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C External Dimensions: 28" H x 15" W (including handles) Internal Dimensions: 22" H x 11.75" W Includes a #3 rubber stopper

Read more less

This Kegland beer line tidy is a handle little part that will help you organize your beer and gas line inside your fridge, keezer, kegerator or cellar. Simply remove the paper backing and use the strong 3M adhesive to attach this beer/gas line organizer to whatever device you like. This keeps your beer and gas plumbing neat and tidy so your draft system looks as good as it works. Primarily designed for 8 mm (5/16") OD tubing, but works with 9.5 mm (3/8") OD and 6.35 mm (1/4") OD tubing as well. Note: for best results, apply the adhesive at room temperature and let stand for 72 hours before applying load.

Read more less

This Duotight Bulkhead is the same one used for installing the Thermowell into the lid of the FermZilla. Allows you to add a bulkhead to just about anything that can then be connected to with EVABarrier 8 mm OD Tubing or 5/16" OD stainless or copper tubing.  Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)  Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals.

Read more less

These faucet brushes are sized for Standard, Intertap, Nukatap, and Perlick faucets. Helps keep beer faucets clean. Protects taps from fruit files and contamination when not in use. 2 pack

Read more less

A shorter style plastic faucet handle with rounded top. Measurements: 2" Tall 1-1/4" Top Diameter 13/16" Bottom Diameter

Read more less

KegLand has developed the world's most compact mini digital gauge with backlight illumination. This very compact design retains high accuracy while still meeting the desirable small form factor.  This meets the growing need as mini keg systems, mini regulators and other more compact keg dispensing solutions are required. Traditional analogue gauges require a small capillary mechanism where a small pipe expands and unravels under pressure. This in turn drives a mechanical cog to rotate the gauge needle.  This age-old technique works quite well especially in large gauges but as this mechanism is manufactured smaller and smaller a tradeoff between accuracy and size becomes the issue.  With very small gauges such as a 27mm x 27mm Mini Gauge, it's difficult to make them better than 10% accuracy due to the physical constraints of the mechanical components. Compatible With: BlowTie 2 Spunding Valve Duotight In-Line Regulator w/ Gauge Core 360 Mini CO2 Regulator Specifications: Battery Life: More than 2 years (using the mini gauge once a day) Battery Type: CR2032 Auto Battery Saver: automatically turns off after 15 sec Size: 27mm x 27mm (1" x 1") Radial O-ring Stem: 7.8mm Bore Please note: This gauge is not suitable for measuring pressure of liquids.  It is only for measuring gas pressure.  If liquid gets into the pressure transducer it will damage the gauge.

Read more less

Wormwood (Artemisia absinthium) is an herb used in the alcoholic drinks vermouth and absinthe.

Read more less

This fine mesh filter screen is made of durable, food-grade plastic and perfectly sized to fit the 12" plastic funnel. It will fit snugly into the funnel to prevent the screen from moving and material from flowing around the sides of the screen. The fine No. 35 mesh is perfect for removing pulp or other small particulates, but many brewing applications require a coarser mesh and would easily clog the No. 35 screen. Specifications: Maximum Temperature: 158°F (70°C)  Diameter         5.5″ (13.97 cm) Mesh Size       No. 35  

Read more less