Newest Products

Brass faucet lever replacement for most standard U.S. draft faucets.

Read more less

Male quick disconnect fitting with a 5/16" barb. Includes a shutoff that seals the valve when not connected to tubing.

Read more less

Female quick disconnect fitting with a 5/16" barb. Includes a shutoff that seals the valve when not connected to tubing.

Read more less

Our quick disconnect locks into place with an audible "click," creating a secure, leak—free seal every time. They also allow quick and easy one—handed disconnections by simply pressing the thumb latch. Micro Matic quick disconnect couplings provide a fast, easy and safe way to incorporate a gas shut—off in your draft beer system. FEATURES One handed operation—no tools needed to connect or disconnect Audible "click" asures your connection is secure High flow valve design for maximum flow in a compact coupling Withstand up to 120 PSI Temperature range  -40°F to 180°F (-40°C to 82°C)

Read more less

Class A 50ml volumetric glass pipette used for measuring liquids in small quantities. Accurate to within 0.05ml.

Read more less

This stainless steel shank assembly includes a back nut, plastic collar (flange), and a 3/16" tailpiece with hex nut and gasket. If desired, the barb can be removed and swapped for a different size or replaced with a Duotight x Beer Thread Adapter. This size of beer shank is a popular choice for building your own custom draft system. Typically installed in the door of a refrigerator or the wooden collar of a converted chest freezer (keezer).  Sizing Note: The shank’s listed size refers to the total length of threaded pipe. Approximately 1-1/8” are needed to account for the thickness of the finishing collar on the front and the space for the locknut on the back. Please take this into account when sizing the shank for your project. Installation Note: On a fridge there are generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 4-1/4" - Total Length (Tip to Tip) 3-1/8" - Shank Length (Without Nut & Nipple) 2-1/4" - Thread Length 1-3/4" - Pass Through Length 3/16" Nipple California Recipients: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Read more less

Replacement mesh liner for a 40L bladder press.  It is similar to a mesh bag but is open on both ends so it can slide over the bladder portion of the press.

Read more less

Barbed fitting for use with tri-clamp systems. This fitting has a 1-1/2 inch TC on one side, 1-1/2 inch barb on the other side. Use with 1-1/2 inch ID hose. The barbed stem is 4-1/2" long. 304 Stainless Steel

Read more less

Replacement bladder for 40l Speidel Bladder Press. Also fits the Kegland 40l press.

Read more less

Stainless steel weldless thermowell 1/2" NPT bulkhead. Stem is 5.75" long

Read more less

This 304 stainless steel shank made by Micro Matic is a perfect option for serving up fresh beverages from a draft faucet.  The shank provides a bulkhead through your refrigerator door.  The end that is inside the fridge you attached your beverage line with a tailpiece and hex nut.  On the other end of the shank you attach your draft faucet. This NSF-certified shank is made of 304-grade stainless steel and is excellent for any beverage. The shank assembly uses Micro Matic's SpinStop™ technology, a simple solution that stops the spin and keeps the faucets upright. Includes the flanges, coupling nut, and lock nut necessary to attach it to the draft tower and faucet. Designed with 7/8"-14 (5/8" BSP U.S. Beer Industry Standard) straight pipe thread, this shank will work with all North American faucets. FEATURES The best in purity - only 304 stainless steel touches the product Complete assembly Connects beverage lines to the faucet Excellent for any beverage Highly durable SpinStop™ technology – keeps the faucets upright Fits on North American faucets NSF certified SPECIFICATIONS Dimensions: 3-1/8"L Bore Dimensions: 1/4" I.D. Shank thread: 7/8"-14 (5/8" BSP U.S. Beer Industry Standard)

Read more less

Total Assembled Height: 12.9" (328 mm) The Large Copper Parrot Head is a distiller’s parrot that provides the convenience of continuous, real-time, in-line ABV measurement of the spirit as it comes out of the still. Designed for use with the T500 Reflux and Alembic Distillery Systems, this proofing parrot will let you track the ABV of your distillate without having to take samples along the way. This allows you to closely monitor the quality of the distillate and determine where to take cuts or stop your distillation.  KEY FEATURES & BENEFITS: High-quality copper construction. Check your alcohol percentage during distillation without interruption. Compatible with the T500 Reflux and Alembic Condensers and other large stills.  Moulded base allows the Parrot Head to sit on a bench top or table. SIMPLE TO SETUP A: Collect the distillate as it drips from the condenser into the Parrot Head collection coneB: Connect the Parrot Head collection pipe to the distillate out tube on the condenser. There is no need to stop distillation or move spirit to a separate collection vessel. Fits alcometers less than 23mm in diameter.* *Alcometer not included. NOTE: This unit will read no greater than 252mm from the base of your alcometer. 

Read more less

Total Assembled Height: 7.7" (195 mm) The Small Copper Parrot Head is a distiller’s parrot that provides the convenience of continuous, real-time, in-line ABV measurement of the spirit as it comes out of the still. Designed for use with the Air Still Pro and Air Still, this proofing parrot will let you track the ABV of your distillate without having to take samples along the way. This allows you to closely monitor the quality of the distillate and determine where to take cuts or stop your distillation. KEY FEATURES & BENEFITS: High-quality copper construction. Check your alcohol percentage during distillation without interruption. Compatible with the Air Still Pro, Air Still, and other small stills.  Moulded base allows the Parrot Head to sit on a bench top or table. SIMPLE TO SETUP A: Collect the distillate as it drips from the condenser into the Parrot Head collection cone There is no need to stop distillation or move spirit to a separate collection vessel. Fits alcometers less than 23mm in diameter.* *Alcometer not included. NOTE: This unit will read no greater than 6.9" (174 mm) from the base of your alcometer. 

Read more less

A 1.5" Tri-Clamp to 1" barb fitting.304 Stainless Steel

Read more less

Cap & Washer 304 Stainless Steel Use on single or series flushers to cap off for running in series For capping off all 5/8" BSP (beer thread) components.

Read more less

Stainless steel 3/8" BSP washer.

Read more less

Stainless Lock Nut. 1/4 in. female BSP.

Read more less

This Duotight fitting is designed to go through the wall of a tank, housing, or wall, similar to a pass through shank, so you can run EVABarrier tubing from one side to the other. Compatible with EVABarrier 9.5 mm OD tubing. With the lock nuts in place, there is approximately 1" of pass through threading. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)  Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals.

Read more less

Did you drop your temperature controller for your TC-100 bundle?  Are you tired of the old Spike logo and colors and want the newest and greatest? Well do we have the controller for you! This thermometer will control to your submersible pump in your cold reservoir and your conical heater. Set your desired fermentation temperature and the controller does the rest! Specifications: Temperature Control Range: -50-210° F Temperature Accuracy: ± 1° F Input Power:  100-265V AC, 50/60Hz Output Power: 100-265V AC, MAX 10A

Read more less

White color bottle wax beads. Bottle Wax Beads help you achieve a tough, moisture-resistant coating that preserves freshness, flavor and fragrance in your wines, or beers, with these blends of FDA approved waxes. You can dip the bottle in the wax for a more rustic look, or use a small measuring cup or spoon if you want the wax in a specific location.1 LB of beads is good for approximately 65 bottles. To use:  Make sure that bottle and cork are clean and dry.  Melt wax in a suitable container, maintain a temperature between 160-170F.  Dip bottle top in wax for 10-15 seconds then pull straight up, keeping inverted.  When the excess wax run-off stops, turn bottle upright. Warning: Do not drip wax on your hand, it may burn you.  Heating wax to a temperature over 450F could result in combustion.  Never pour water on a wax fire (fire will spread).  Use a fire extinguisher or cover with a metal lid.

Read more less

Orchard Breezin' Peach Perfection The luscious scent of ripe peaches explodes from this exceptionally crisp, flavourful wine. Pale straw in color, this wine is a natural addition to a lazy afternoon or an evening barbecue. Sip your favorite Orchard Breezin’ wine during cherished moments of “me” time, or enjoy it with family and friends to make every social occasion extraordinary. 2007 and 2008 WineMaker International Award Winner Specifications: Category: White Size: 5.5L Yield: 23L Ready Time: 4 weeks Oak: Unoaked Body: Medium Sweetness: Sweet Target Alcohol Level: 7.6% Kit Instruction Sheet

Read more less

California Style ChardonnayCru International Wine Making Ingredient Kit Captivating flavours of green apple and tropical fruit enhance an upfront floral bouquet as is expected by the finest California Chardonnays. It will develop to reveal layers of ripe fruit and integrated oak. Specifications: Weeks: 5 Varietal: Chardonnay Sweetness: Dry Oak: Medium Body: Medium Target Alcohol %:  12.3% Makes:  6 Gallons Labels Included:  No Whether you enjoy tantalizing reds or exciting whites, Cru International has the perfect international wine style for you. Each kit contains 8 liters of superior quality varietal grape juice and concentrate that, in as little as 5 weeks, will make 23 liters of your very own distinctive craft wine. Kit Instruction Sheet

Read more less

Get the exact tension you need with your BrewZilla or DigiBoil with KegLand's Stainless Steel Adjustable Clamp Set. Permanently replace the standard lid clamps and adjust the tension to your needs. These clamps are only intended for use with the metal Distillation Lid or Boiler Extension Kits. If you are having trouble getting the correct tension to form a good seal with those accessories, these adjustable clamps can help you dial in the fit. They should never be used with the standard glass lid. Compatible with 35L and 65L BrewZillas (Gen 3 / Gen 4), DigiBoils (Gen 1 / Gen 2), and Boiler Extensions. Installation Instructions: You will need a pair of bolt cutters or tin snips to cut the standard clamp off. (Please see product photos for optimum cut location). Remove the nut and bolt and thread it through the clamp. Ensure that the grooved part is facing outwards (photo for reference). If you do not have the grooved part facing outwards, the clamp will be blocked by the round lip of the boiler. Loosen the bolts and spin the clamp up or down to adjust the tension. Use the nuts to lock the desired tension. It is always best to start looser than you think, then adjust tighter. Warning: Do not use the adjustable clamps with a glass lid, the clamps are only designed for distillation lids or other metal accessories.

Read more less

Chèvre Cheese Culture - A soft & creamy variety, traditionally made with goat's milk! Direct-set (single use) -- Cultures at room temperature. Contains 4 packets (includes rennet) Ingredients: lactose, ascorbic acid, lactic bacteria, vegetable rennet

Read more less

Replacement o-ring for Cornelius keg post.

Read more less

Replacement o-ring for Cornelius keg post.

Read more less

Replacement o-ring for Cornelius keg post.

Read more less

Replacement o-ring for Cornelius keg post.

Read more less

Borosilicate glass beakers. Measurements are approximate +/-5% Sizes 100ml, 250ml, 400ml, and 1000ml

Read more less

Transform the G40 or G70 Brewing System into a home distillery with the G40 & G70 Distilling Lid. This lid features an industry standard 4” tri-clamp opening to allow for the connection of the Still Spirits T500 Reflux and Alembic Condensers, as well as third-party distilling equipment. The G40 or the G70 paired with the Distilling Lid offers an all-in-one automated brewing system that can also be used to distill, making it the ultimate combo to brew high-quality beer and distill spirits from grain. This lid features an industry standard 4” tri-clamp opening to allow for the connection of the Still Spirits T500 Reflux and Alembic Condensers, as well as third-party distilling equipment. Features: 304 Grade Stainless Steel Construction Standard 4” tri-clamp opening (industry standard) Pressure relief valve Barrel clamp locking mechanism What's Included Distilling Lid 2 x Flat Seals Clamp Lid Seal

Read more less

This low energy RAPT enabled Bluetooth Thermometer is compatible with the Gen 4 BrewZilla, RAPT Temperature Controller, and RAPT Fermentation Chamber. It will not work without one or more of these devices. By receiving multiple BLE thermometer sensors, the BrewZilla can make smarter and more automated decisions on how to control the brewing or distillation process.  For example, a BLE thermometer can be placed into your coolant water so you get an alarm if the temperature is too high, or a BLE thermometer can be put into the middle of the malt pipe so you can more accurately control elements switching on/off to achieve a core malt pipe temperature. RAPT ConnectivityThe new Bluetooth thermometer can connect up to your BrewZilla Gen 4, RAPT Temperature Controller, RAPT Fermentation Chamber and log that temperature data and manipulate fermentation/brewing and distillation profiles in the RAPT Portal. This greatly reduces the need for handwritten records of your brew day as it's all done automatically. The RAPT portal also allows you to see every brew you have done in the past with logged temperatures from the main unit's probe and this digital thermometer. This unit can also be set up to get push notifications to your mobile phone of when to sparge for example. Along with this ease of access and control, the RAPT BrewZilla will also allow you to fully customize your brew day with profiles specifically tuned to your style of brewing or your recipe. For example, you could set up step mash profiles using the core temperature of your mash instead of the cavity below where the BrewZilla's main temp probe is located. Greater accuracy for a more repeatable recipe that results in much better beer! Specifications: Temp Range: -4°F – 572°F (-20°C – 300°C) Probe Length: 8" (20 cm) Note that the probe tip is very sharp Remove black plastic tip before use Plastic tip should be used for storage to avoid punctures / injury Cable Length: 39" (100 cm) Magnetized Backing Plate (Orange) 2 x AAA Batteries (included)

Read more less