Newest Products
Spalt Pellet Hops
Hop Type: Aroma / FlavorOrigin: GermanyAlpha Acid: 2.5 - 5.5%Common Styles: Pilsners, Lagers Spalt hops are a naturally occurring varietal used primarily for their wide range of aromatics. With an alpha acid content between 2.5% and 5.5% and similar beta acidic content, this hop is rarely used as a bittering addition. What you will get is the lush fragrance of floral, fruity, and spicy notes often used in Pilsners and German style Lagers. Spalt is also a great option for dry hopping, and brings out a wonderful hoppy flavor. Possible substitutions for German Spalt hops include Saaz, Daughter Spalter Select, or Tettnanger.
$2.30 - $21.55
Stainless Carbonation and Line Cleaning Cap
This stainless steel ball lock cap features soda bottle threads, allowing you to convert a soda bottle into a pressurized growler. It is compatible with both gas and liquid ball lock disconnects. Also works well for cleaning draft lines. Simply add line cleaning solution to a soda bottle, attach it to the draft line, and open the faucet to push solution through. This is a direct replacement to ball lock fittings included with the FermZilla pressure kit. It can also be attached to the FermZilla collection container, enabling you to purge the collection container of oxygen. 28mm PCO 1881 Threads
$15.50
Go-Ferm Protect
Go-Ferm Protect is a new formulation of Go-FermGo-Ferm Protect is a natural yeast nutrient that is added to the yeast hydration water before adding your selected yeast strain. Its complex formula provides your yeast with the proper sterols, unsaturated fatty acids and micronutrients needed to begin fermentation in optimal shape. The great thing about Go-Ferm Protect is that the proper nutrients and vitamins are introduced BEFORE the yeast is added to the must. This way 100% of the nutrients are available to your selected yeast strain and won't be stolen away by any indigenous yeast or bacteria that may be present in the must before your yeast can become established.New Advanced Formula!Go-Ferm Protect was created as a result of a multi-year study of problem fermentations by Lallemand and the National Agricultural Research Institute (INRA) in France. During this period, they looked at the adverse effects on the yeast from overripe fruit (>28 Brix), low nutrient levels, over clarification of the juice and poor fruit quality (Botrytis, rot, high bacteria count, insecticide and fungicide residue). Their research showed that musts deficient in sterols and unsaturated fatty acids made yeast more susceptible to ethanol toxicity (high alcohol), osmotic shock (high sugar), temperature and others stress factors. In response to this data they created the NATSTEP (NATural STErol Protection) process that incorporated sterols, unsaturated fatty acids, as well as vitamins and minerals into an advance yeast rehydration nutrient: Go-Ferm Protect.Go-Ferm Protect provides a combination of protective and nutritional benefits that ensure your yeast begins your fermentation in peak form! The best part is that if your fruit is in great shape then Go-Ferm Protect will simply help your yeast out that much more!Go-Ferm Protect does not contain any DAP, as DAP is harmful to the yeast during the rehydration process. GO-Ferm is usually used in conjunction with Fermaid K yeast nutrient; where Go-Ferm Protect is used at yeast hydration then Fermaid K is added at the first signs of fermentation and again after 1/3 sugar depletion.To UseUse at a rate of 1.25 g Go-Ferm Protect per 1 g of yeast. A rough approximation of weight is 1 tsp = 3.2 grams. It is highly recommend using a scale to weigh the product for an accurate dose. It is not recommend relying on these rough conversions for accurate dosage rates.
$2.79 - $44.99
Top Shelf Schnapps Base 300g
Gives the ideal finished thickness and sweetness to Schnapps. Add alcohol as indicated on the essence bottle in a large mixing bowl. Slowly add pack contents while stirring with a whisk. Add essence and top up to 1.125L (40oz) with water.
$4.99
Floating Dip Tube with Filter
When using the Torpedo Buoy™ floating dip tube, you can draw the clearest beer possible from the first pint to the last. Included is a 3" metal dip tube, 23.5" length of 1/4" ID silicone tubing, and stainless steel ball float. This floating dip tube is compatible with any ball lock or pin lock homebrew keg. Sized for 5-gallon kegs, but it can be shortened for use with 1.5 or 2.5-gallon kegs. Instructions
$22.00
Speidel Plastic Fermenter - 20L (5.3 gal)
Speidel fermenters are safer than glass carboys, easier to keep clean that plastic carboys, and easier to transfer contents that either. These fermenters are made out of HDPE and are extremely durable.Key Features: 5.3 gallons, 20 liters Heavy duty HDPE construction is durable and resists oxygen transfer. Built-in handles make these tanks easy to move, even when full. Large lid opening makes them easy to clean by hand. All ports seal with gaskets and the vessel can be fully sealed for long-term storage. Includes a spigot and airlock. Approximate Dimensions: 12 in. Diameter x 16.5 in. Height (w/out airlock in place). Mouth is 4.75 in. wide. Note: The maximum temperature that these plastic fermenters can handle is 140F.
$69.99
Pipe Thread Tape
1/2" x 520" PTFE Thread Seal Tape
$2.00
Lallzyme EX
Specially formulated enzyme preparation for improved color intensity and stability, greater mouthfeel, and enhanced fruity, floral, and spicy flavors in red wine. Dissolve .1 g in 10ml of water per gallon of must. Add to must prior to fermentation. 0.8 gram or 8 gram packages.
$2.39 - $6.99
Fermax Yeast Nutrient
A balanced blend of minerals, proteins, amino acids and vitamins to improve yeast activity during fermentation. Used to quicken or restart fermentation. Suggested dosage rate is 1.0 - 1.5 teaspoons per gallon.
$3.49 - $17.99
Pressure Gauge
This pressure gauge can be used while pressure fermenting, briting or pressure transferring. Specifications: 0-30psi 2" Dial 1/4"npt **This accessory is to only be used with the FLEX+ or the upgraded high pressure lid**
$15.00
FLEX Leg Extension Set
Leg extensions are a great option to get th FLEX off the ground. This reduces bending over to take gravity readings, add hops, transfer, etc. The shorty leg extensions are 9” long and the long leg extensions are 18". Both screw directly into the bottom of the FLEX legs. Both sets of leg extensions can be used with the stock leg caps, leveling feet and casters. *It is recommend to use the extended bracing shelf when using the leg extensions for added stability* Shortly leg extension specifications: 304SS 9" long Top threads for attaching to conical legs Bottom threads for attaching leveling feet and casters Long leg extension specifications: 304SS 18" long Top threads for attaching to conical legs Bottom threads for attaching leveling feet and casters
$42.00 - $55.00
Quick Connect Fitting - MQC x MNPT
Out of all the ways to attach silicone tubing to your brew kettle we like quick connect ball lock fittings the most. The ease of connecting/disconnecting and cleaning is unmatched by standard hose barbs, cam locks or tri-clamps. These fittings can easily be attached using one hand even with heavy brewing gloves. The inside diameter of our QC fitting is 1/2". This creates a full port design and will not restrict flow going through the barb. Specifications: 304SS 1/2NPT x QC 1/2" ID
$9.99
Quick Connect Fitting - MQC x FNPT
Out of all the ways to attach silicone tubing to your brew kettle we like quick connect ball lock fittings the most. The ease of connecting/disconnecting and cleaning is unmatched by standard hose barbs, cam locks or tri-clamps. These fittings can easily be attached using one hand even with heavy brewing gloves. The inside diameter of our QC fitting is 1/2". This creates a full port design and will not restrict flow going through the barb. Specifications: 304SS 1/2NPT x QC 1/2" ID
$9.99
Quick Connect Fitting - FQC x Barb
Out of all the ways to attach silicone tubing to your brew kettle we like quick connect ball lock fittings the most. The ease of connecting/disconnecting and cleaning is unmatched by standard hose barbs, cam locks or tri-clamps. These fittings can easily be attached using one hand even with heavy brewing gloves. The over sized barb (5/8" OD) is specially designed for our 1/2" silicone tubing. The larger size does two things: It stretches the tubing over the barb creating a tight fit requiring no hose clamps. The inside diameter of our barb is 1/2" compared to standard 1/2" barbs which have a smaller 3/8" size. This creates a full port design and will not restrict flow going through the barb. Specificatioins: 304SS 5/8" barb x QC 1/2" ID
$17.00
Gas Post x 1/4" NPT
Since most brewers who keg use ball lock connections for hooking up their CO2 tank we figured why not design a ball lock fitting to easily add CO2 to your conical! The Spike Brewing gas post assembly has a standard ball lock gas post on one end with a 1/4" NPT on the other. This allows it to screw directly into Spike Brewing carb stone as well as the their gas manifold. Specifications: Stainless steel Ball lock x 1/4" NPT Comes with replacement o-ring
$11.00
2" TC x QC (Quick Connect)
Out of all the ways to attach silicone tubing to your brew kettle or conical, quick connect ball lock fittings are a great option. The ease of connecting/disconnecting and cleaning is unmatched by standard hose barbs or cam locks. These fittings can easily be attached using one hand even with heavy brewing gloves. The inside diameter of this quick connect fitting is 1/2". This creates a full port design and will not restrict flow going through the barb. Specifications: 304SS 2" TC x QC 1/2" ID
$18.00
2" TC x 5/8" OD Barb
Not all hose barbs are created equal! The Spike Brewing special 2" TC x barb fitting features a shorter profile and over sized diameter barb. The over sized barb (5/8" OD) is specially designed for 1/2" Silicone tubing. The larger size does two things: It stretches the tubing over the barb creating a tight fit requiring no hose clamps. The inside diameter of our barb is 1/2" compared to standard 1/2" barbs which have a smaller 3/8" size. This creates a full port design and will not restrict flow going through the barb. Specifications: 304SS 2" TC 5/8" OD 1/2" ID
$16.00
1.5" TC x 5/8" OD Barb
Not all hose barbs are created equal! The Spike Brewing special 1.5" TC x barb fitting features a shorter profile and over sized diameter barb. The over sized barb (5/8" OD) is specially designed for 1/2" Silicone tubing. The larger size does two things: It stretches the tubing over the barb creating a tight fit requiring no hose clamps. The inside diameter of our barb is 1/2" compared to standard 1/2" barbs which have a smaller 3/8" size. This creates a full port design and will not restrict flow going through the barb. Specifications: 304SS 1.5" TC x 5/8" barb 1/2" ID
$14.00
15 psi Pressure Relief Valve
When pressurizing your Spike Conical you'll always want to use a pressure relief valve (PRV). This will prevent the tank from being over pressurized and causing a potential failure to occur. This Spike Brewing PRV was developed with their OEM specifically to work with their CF series Conical. It will keep your tank below the 15psi max working pressure rating. The PRV also has a handy bleeder pull ring to release built up pressure. Specifications: 15 psi release 1/4" npt threads Spike Brewing's specially designed gas manifold is also now available.
$25.00
Insulated Tubing
Another Spike innovation that we think solves two big issues. The obvious benefit from insulated lines is increasing your cooling efficiency from your glycol lines. The other benefit is the elimination of line 'sweating'. No more pools of water on your floor during those hot Summer days! *Sold in 6ft increments* Specifications: FDA approved, super flexible PVC tubing 3/8" ID x 1/2" OD tubing 3/8” ID matches temp coil ID; no flow restrictions in the system 3/4" thick flexible insulation Eliminates line sweating and dripping onto your floor Easily connects to our temp control coil with the new Spike Brewing quick connect fittings Made in the USA Detailed TC-100 product guide:Product Guide.pdf
$36.30
Conical Replacement Lid Gasket
The Spike Brewing conical lid gasket is a one piece design made from FDA approved Silicone. This design allows for an easy install and easy clean up. Simply push the gasket into the gasket groove on the lid. Specifications: Black in color FDA approved Silicone
$13.00 - $40.00
Caster Kits
The Spike Brewing casters screw directly into the bottom of their conical legs for easy installation. The CF5, 10 and 15 use a 3" caster while the CF30 uses a larger 4" caster. CF5, CF10, CF15 Specifications: 3" caster wheel Set of 3 Non-marking wheel Locking brake + locking swivel CF30 Specifications: 4" caster wheel Set of 4 Non-marking wheel Locking brake + locking swivel *Spike Brewing recommends a standard or extended bracing shelf when using the casters for added stability* Caster wheel install and instructions:Install + instructions
$40.00 - $63.00
Blow-Off Cane
This USA made blow off cane is designed to attach to the 1.5" TC on the lid of the Spike Brewing conicals. Options:Standard: For use as a standard blow off into sanitizer 1.5" TC End: Use for a blow off into sanitzer with a barb (HERE) and/or attach the Spike Brewing pressure manifold (HERE). Specifications: 1.5" TC 304SS 15” total drop Works with every size conical Made in the USA
$45.00 - $65.00
Closed Pressure Transfer Kit
Introducing another cool accessory to compliment Spike Brewing CF series conicals. Their closed pressure transfer kit (CPT kit) will allow you to rack your beer from your conical to keg without exposing it to oxygen. This will help you avoid off-flavors that can be caused by oxygen coming in contact with your beer. The Spike Brewing CPT kit uses all stainless hardware and Ultra Barrier tubing which is antibacterial due to its silver lining. It is also BPA free and over-sized to promote a quick transfer from conical to keg. CPT Kit Includes: 1.5" TC to flare 1.5" TC clamp 1.5" TC gasket Flare to liquid ball lock Gas ball lock blow off The Spike Brewing gas manifold bundle can be seen HERE.**Always use a 15psi pressure relief valve when pressurizing a tank****
$77.00
TC Sample Valve
Spike Brewing conicals come equipped with this 100% sanitary sample valve. Taking samples has never been so easy; simply twist the valve handle to slowly draw out a sample from your fermenter for a gravity reading. The one downside is you might end up with lower final volumes due to how easy it is to take taste tests ;)Specifications: 1.5" TC 304SS FDA Silicone seals 3/8” barb
$35.00
2" TC Sight Glass
The Spike Brewing engineers have totally redesigned the 2" TC sight glass from the ground up! Standard sight glasses use 4 long bolts that need to be tightened in a criss-cross pattern to get even pressure to avoid leaks. Their new design is made up of only 5 parts compared to 26 parts in a standard sight glass. No tools are required to assemble or disassemble; simply twist the knurled end cap off. The glass is also protected by the stainless guard which protects the glass from even the clumsiest brewer. The sight glass allows for direct attachment to the bottom port of our conicals. The sight glass allows for monitoring flow, color and clarity. A sight glass is also helpful when collecting yeast. Specifications: 2" TC 304 stainless steel Extra thick Pyrex glass 6” long 25% lighter than previous design **A 2" gasket and clamp will need to be purchased separately if you do not already have spares**
$75.00
Conical Extended Bracing Shelf
Spike Brewing's new custom Spike extended bracing shelf was a solution created based on customer feedback on their normal bracing shelf. The extended bracing shelf now widens the footprint of the conical making it more stable. It is a recommended addition when going vertical with the leg extensions or mobile with casters. Features: 304SS Super thick 14ga material Made in the USA Welded support bars Includes 3 bolts to affix the conical to the bracing shelf Bracing shelf install and instructions:Install + instructions Additional accessories to add on: -Caster Wheels -Standard or Shorty Leg Extensions
$70.00 - $90.00
CIP Ball
Another cool innovation from the Spike Brewing engineers; their low pressure CIP ball! They wanted to design a CIP ball that didn’t require home brewers to purchase another pump if they already owned one. Small brewery pumps, like Chugger and March pumps used on our Spike System, are very common for most home brewers. However, most CIP balls require a much larger pump to work properly. This CIP ball was specifically designed to work with the more common 7GPM pumps. It has also been tested with larger sump pumps which are also commonly used for CIP applications. Spike Brewing also designed the CIP ball to fit through a 1.5" TC port. This allows for quick install of the CIP ball after fermentation. This works especially well with cleaning the temp control coil. They recommend a 5-10min CIP with 160F brewery wash to give a nice and shiny FLEX or conical fermenter. Pro Tip:If you do not have a FLEX+ lid with 1.5" TC port you can attach the CIP ball to the secondary port of your FLEX after an initial dump and rinse. Then simply CIP as described above! Specifications: 1.5" TC x 1.5" TC 304SS Low flow design
$70.00
Racking Arm
Another cool product the Spike Brewing engineers and in-house welders developed is their USA made racking arm. This racking arm provides 6" of total travel allowing you to draw clear wort even with the hoppiest of beers.The racking arm also incorporates a position indicator that is welded on so the orientation of the racking arm can easily be seen from the outside of the sealed conical (especially useful in closed pressure transfers). Specifications: 1.5" TC 304SS Position indicator Works with every size conical Made in the USA **A 1.5" gasket and clamp will need to be purchased separately if you do not already have spares**
$40.00
Carb Stone
If you didn't already know the Spike Conical is a unitank! This means it is designed to handle pressures up to 15psi. This capability allows you to add 15psi of pressure needed to carbonate your beer before transferring to your keg. This will reduce carbonation times from upwards of a week down to less than 24hrs. Spike Brewing's carb stone is designed to attach to the outside of the racking port butterfly valve. This means the carb stone can be installed when you need it and won't be sitting inside the tank during the entire fermentation process. This eliminates the chance for the stone to become clogged. It also has a protective stainless housing which prevents damaging the very brittle 'stone'. Detailed product guide:Product Guide.pdf Forced carbonation pressure chart:Carbonation Chart Carb Stone Only Carb Stone 1.5" TC Clamp 1.5" TC Gasket Gas Post Carb Stone Bundle Carb Stone Package (see above) Pressure Gauge (Link) PRV (Link) 2nd Gas Post (Link) Gas Manifold (Link) **Always use a 15psi pressure relief valve when pressurizing a tank**
$85.00 - $160.00
Gas Manifold Bundle
Spike Brewing's specially designed CO2 gas manifold is designed to attach directly to the 1.5" TC port on your fermenter's lid. This manifold allows you to easily add pressure for transfers, stuck yeast dumps, purging oxygen, carbonating, etc. The manifold has 3 ports for a pressure gauge, pressure relief valve and a ball lock gas post. One part, three functions, easy assembly, easy cleaning; what more could you ask for!? Gas Manifold Bundle: Gas Manifold Pressure Gauge (Link) PRV (Link) Gas Post (Link) **Always use a 15psi pressure relief valve when pressurizing a tank**
$85.00
Temperature Control Coil
These USA made temp control coils are specifically designed for the CF series conicals and extend far enough into the conical to temp control both full and half batches. Used in conjunction with a temp controller our temp control coil will help manage your fermentation temps, allow for lagering and cold crashing.The Spike Brewing temp coil simply drops through the top of the lid and quickly attaches with a standard TC clamp. This is a huge improvement over conicals using coils mounted in the side wall. This quick attaching method allows you to lift the coil up slightly to pitch yeast, add hops, etc. The coils are spaced with a sufficient gap for easy cleaning. Simply CIP the conical or soak in brewery wash to easily clean. The temp coil is also a part of Spike Brewing's TC100 Temp Control System and Flex TC100 Bundle that includes everything you need to control your fermentation temperatures! Detailed TC-100 product guide:Product Guide.pdf Specifications: 4" TC 304SS 3/8" tubing Specifically designed for each size Made in the USA Limited availability in store. Drop ships from vendor.
$104.50 - $110.00
Conical Heater
Unfortunately some of us will have to heat our conicals during the long Winter months. No fear, Spike Brewing has the solution! Each conical has its own sized heater and the wattage of each is carefully designed to match it. They also use a built in thermostat which stops the heater from getting too warm. This means you get a gentle warming action when your beer drops below your desired temp (opposed to rapid heating which can overshoot or 'cook' your beer). This heater attaches to Spike Brewing's insulated conical jacket via Velcro. It rests on the bottom cone section of the conical where the coldest liquid is. This will give the most even temperature throughout your fermenter (happy yeast!). Specifications: Different wattages for each fermenter (ranging from 80w to 150w) Built in 90F thermostat to prevent the heater from overheating your wort 5' long cord Detailed TC-100 product guide:Product Guide.pdf Limited availability in store. Drop ships from vendor.
$100.00 - $130.00
TC-100 Bundle
Spike Brewing's TC100 temp control system will manage both cooling and heating of your Spike Conical. The digital controller's temp probe will feed into the included thermowell on our CF Series Conical. Also included is a specially fitted neoprene jacket which features reinforced port holes to reduce the chance of ripping during install. Last (and maybe the coolest item) is Spike Brewing's special insulated tubing. This almost eliminates tube cooling losses and will prevent your cooling lines from sweating all over your floor! Cooling:When the temp in the conical rises above the set point it will turn on the pump submerged in your cold water reservoir (bucket of ice water, dorm fridge, aquarium or glycol chiller, DIY AC chiller, etc). This will pump cold water/glycol through the temp control coil, which mounts to the lid, cooling your beer until it reaches the controller set point. Heating:When the temp in the conical falls below the controller set point the optional heater will kick on warming the unit up. Detailed product guide:Product Guide.pdf TC100 Package:-Digital closed loop controller (heating and cooling)-Insulated tubing (more efficient and no more sweaty tubes!-Temp control coil-Neoprene insulated jacket-Submersible pump (pumping cold water through the temp coil)-Temp Coil Quick Connect Fittings TC100 + Heat Package:-TC100 Package (above)-Optional heater (for us northern brewers) Limited availability in store. Drop ships from vendor.
$345.00 - $470.00
1.5" TC x QC (Quick Connect)
Out of all the ways to attach silicone tubing to your brew kettle or conical, quick connect ball lock fittings are a great option. The ease of connecting/disconnecting and cleaning is unmatched by standard hose barbs or cam locks. These fittings can easily be attached using one hand even with heavy brewing gloves. The inside diameter of this quick connect fitting is 1/2". This creates a full port design and will not restrict flow going through the barb. Specifications: 304SS 1.5" TC x QC 1/2" ID
$17.00
1.5" TC Thermowell
Spike Brewing's thermowell features a 1/4" temp probe opening on the outside which is mounted to a 1.5" TC fitting. This allows it to attach directly to the sanitary TC fitting on the conical. It also allows for an optional digital temp sensor to be attached. The probe is completely sealed from the outside. Pro Tip:The thermowell can be packed with thermal grease to help temperature response times. Specs: 1.5" TC 304SS 4” long 0.250" ID
$30.00
