Newest Products
Coupler Check Ball
Sanke Coupler Check Ball Coupler Probe Type: Type A, Type G, Type U
$3.50
Coupler Body O-Ring, Perlick
Replacement body o-ring for Perlick couplers.
$0.75
Coupler and Hex Nut Wrench
Keg coupler probe and hex nut wrench
$9.95
Counter Pressure Accessory Package
Use this kit with your counter pressure bottle filler. This kit includes a gas line tee, gas and beverage quick disconnects, 6' of gas line, flare fittings, and 5' of beer line.
$40.00
Corny Lid Boot (Cap), A.E.B
Helps protect your keg from scratches from your lid.
$0.75
Corny Keg Lid with Tab
A replacement lid for Cornelius (Corny) kegs. This lid has a tab welded on the inside for hanging mesh bags of dry hops, oak, or other additives. Pressure relief valve and lid o-ring included.
$27.50
Cornelius Keg Lid, New
A replacement lid for Cornelius (Corny) and Firestone kegs. Pressure relief valve included. Includes pressure relief valve and lid o-ring (not pictured).
$22.00
AlcoEngine Copper Reflux Still Top w/ Garden Hose QDs
AlcoEngine copper reflux condenser with garden hose quick disconnects for water flow. This flow management (FM) design of reflux still has been designed to create high percentage pure neutral spirit. The FM technology used in this design makes this process robust and easy to use. No need to worry about water pressures and fine tuning of water flow speeds. The FM design gives you direct control of the reflux ratio and therefore the purity of your end product. It’s never been so easy to enjoy the craft of distillation. Use the custom lid to use with a Robobrew or the Turbo Boiler as the base for this still top. Note: Pictured boiler not included. This item will not be sold or shipped to the following states: Kentucky, Maryland, North Carolina, or South Carolina. Instruction Sheet Download
$154.00
Copper Counterflow Chiller with Fittings
A copper counterflow chiller with connection fittings and attached mounting bracket. The wort in and out lines are 1/2" fpt connections with the water connections are male and female 3/4" garden hose connections. The inner tube is made from 12' of 5/8" convoluted (twisted) copper which continually turbulates the wort as it flows through. The outer tube is made from 7/8" copper. This counterflow chiller allows you to pump wort through without having to restrict your pump to slow down flow.10 1/4" height by 11" overall diameter (coils themselves are about 6" in diameter)
$260.00
Copper Condenser - Still Spirits T500
The Still Spirits Turbo 500 reflux condenser works on the principles of ceiling temperatures, where it prevents chemical substance above a certain boiling point being processed. Unlike other reflux condensers on the market, the Turbo 500 works with a focus on the water flow and controlling the temperature of the water flow out. Assuming that the temperature of the water flow is stable, it is able to create a ceiling threshold temperature based on the water flow out.NOTE: The T500 Condenser and Boiler are sold separately.
$289.99
Copper Alembic Dome Pot Still Top
A component of the Still Spirits Alchemist Series, Copper Alembic Dome Top fits onto your T500 Boiler. This can be used in place of the T500 Boiler's stainless steel lid. The large copper surface area of this dome top acts as a catalyst with the vapor in the still and helps enhance and concentrate the flavors and aromas as well as remove unwanted sulfur compounds. This produces a smoother, richer, sweeter tasting spirit. Condenser and boiler sold separately.
$199.99
Cooling Pump
All pumps are not equal! The Spike Brewing engineers tested over 15 pumps during the development of this project and found almost all small submersible pumps on the market are grossly overrated. This can greatly affect your temperature control as flow rate is directly proportional to cooling efficiency. To use: Simply plug our pump into our temp controller Connect your insulated lines to your temp control coil and to the pump outlet Submerse the pump in your cooler (with ice), fridge with cold water reservoir or glycol chiller Start cooling your wort! Specifications: High flow submersible pump 3/8" barbed outlet (connect directly to our insulated tubing) 12v DC powered (much safer than AC submersible pumps) Suction cups to keep pump submerged Detailed TC-100 product guide:Product Guide.pdf
$45.00
Grainfather Conical Fermenter Cooling Connection Kit
Allows you to connect additional Conical Fermenters to The Grainfather Glycol Chiller. Includes: 2 x Cooling Connection Couplers 2 x 2 m (6.5 ft) insulated hoses
$49.99
Column O Ring for T500
O-ring used between the column and the lid of the T500 unit. This needs to seat in the grove of the main column.
$6.99
KOMOS® XL Slimline Cold Plate - 2 Lines
The KOMOS Slimline Cold Plate is made from rugged aluminum casting with a large thermal mass for excellent heat absorption. High conductivity aluminum alloy aids the heat transfer as your beverage travels through the internal 18 ft. long stainless steel lines. Inlets and outlets come with standard 1/4" male flare thread so you can easily attach swivel nuts and barbs or Duotight push-to-connect fittings. Aluminum cast 18 ft. internal lines made from 304 stainless steel 1/4" male flare connections 15" L x 10" W x 1" Thick (2.75" tall at inlet/outlet) Pre-drilled mounting holes Recommended serving pressure - 20-30 psi
$150.00
Regulator Nut Wrench
Just keep this handy Co2 nut wrench hanging on the regulator inlet and you'll never have to hunt down a wrench when it's time to change your tank. Specifications: 1 1/8" Hex Offset Closed End
$5.00
CO2 Inlet Nipple, LH
CO2 inlet nipple with o-ring tank seal, left hand threads
$9.99
Mangrove Jack's Wine Yeast - CL23
A multi-purpose strain with a very neutral sensory impact, suitable for most wine style but especially white, blush and sparkling wines. This fast fermenting yeast is highly robust, tolerating difficult fermentation conditions and alcohol levels up to 18% ABV. Suitable for Cabernet Sauvignon, Chardonnay, Vegetable wine and more. Alcohol Tolerance: 18% ABV Usage Directions: No rehydration required - add direct to grape must and stir well. For best results, ferment at 14 - 32°C (57 - 90°F). Storage Recommendations: Store in a cool, dry place. 8g Sachet
$2.50
Chronical Replacement O-rings
Four replacement o-rings for Ss Brewing Technologies Chronical racking arm bought after September 2014.
$2.99
Chrome Plated Brass Ferrule for 5/16'' ID SS Tubing
Brass ferrule for jockey box cooling coil. Chrome plated brass with a 5/16" ID bore.
$3.50
Chrome Plated Brass Ferrule for 3/8'' ID SS Tubing
Brass ferrule for jockey box cooling coil. Chrome plated brass with a 3/8" ID bore.
$3.50
Chrome Plated Brass Ferrule for 1/4'' ID SS Tubing
Brass ferrule for jockey box cooling coil. Chrome plated brass with a 1/4" ID bore.
$3.50
Check Valve, Perlick Coupler
Check valve for Perlick couplers.
$3.25
Stainless Steel Check Valve
Stainless steel check valve 1/4" male flare(mfl) to 1/4"female flare(ffl) fittings
$11.95
Check Ball Retainer, Sanke (U,G,A)
Ball Retainer, Sankey Coupler (Probe)
$0.70
Check Ball
Replacement check ball for Taprite sanke coupler Specifications: .375 Diameter Nylon
$1.49
Champagne Wires
Silver metal champagne wires for securing champagne stoppers and corks.
$3.50 - $12.99
Champagne Wire Twister
Handy tool for tightening wires.
$5.95
Champagne Stopper
Plastic stoppers for champagne bottle.
$3.99 - $12.99
CH35 Viniflora Malolactic Bacteria
Dry Malolactic Bacteria - Viniflora CH35 One package is good for 66 gallons. Viniflora CH35 is a freeze-dried culture of Oenococcus oeni. This malolactic bacteria is a good selection for direct inoculation of rose and white wines. Viniflora CH35 has been selected for its outstanding performance in malolactic fermentation of difficult white wines. This strain is the perfect match for rose and white wines but can also be used with success in red wines. Outstanding tolerance to low pH and elevated levels of SO2 (down to pH 3.0 and up to 50ppm!) Strong fermenter under harsh white wine conditions Clean and fruity flavor profile Low production of volatile acidity No production of biogenic amines High inoculation level encourages a completed malolactic fermentation 14% alcohol tolerance Viniflora CH35 should be added to dry wine, right after the alcoholic fermentation. No rehydration or reactivation is required. Ships with an ice pack.
$32.99
CH16 Viniflora Malolactic Bacteria
Viniflora CH16, 1.5 grams. Is good for 66 gallons. Viniflora CH16 is a freeze-dried pure culture of Oenococcus oeni. This malolactic bacterium has been selected to induce malolactic fermentation in red wine with high alcohol levels, after direct inoculation. Viniflora CH16 has been isolated from a 16% Petit shiraz wine in the Russian River area of California, USA. It has been carefully selected for its outstanding ability to conduct fast malolactic fermentation in high alcohol red wine (up to 16% v/v) with a pH value above 3.4. Very high fermentation speed Low production of volatile acidity Outstanding tolerance to high alcohol levels. Excellent all round tolerance to pH, temperature and SO2 No production of biogenic amines Viniflora CH16 should be added to dry wine, immediately after the alcoholic fermentation. Viniflora CH16 should always be inoculated directly into the wine. No rehydration or reactivation is required. Ships with an ice pack.
$35.99
Cashmere Pellet Hops
Cashmere is a dual-purpose hop that offers delicate aromas of lemon and lime with secondary notes of lemongrass and tangerine. Aroma and Flavor profile includes citrus - strawberry, melon, berries, stone fruit, herbal, spicy, tropical, woody. Alpha Acid: 6.0 - 9.0% Beta Acid: 4.0 -7.0% Total Oil: 0.5 - 1.8 ml/100g All hops are nitrogen flushed to preserve freshness.
$2.00 - $19.45
Centennial Pale Ale Extract Kit
An easy to make, American Pale Ale loaded with Centennial hops for a bright citrusy/floral finish. This recipe does not have any steeping grains which makes for a quick brew day. Each kit includes high-quality malt extract, specialty grains, and hops. With step-by-step instructions included, you'll be guided through the brewing process, ensuring a smooth and successful batch every time. Our recipe kits include steeping muslin socks for grain and boiling hop additions. Yeast and priming sugar are not included in the kit and are optional add-on items. Estimated Beer Stats LME Option DME Option Original Gravity (OG) 1.046 1.054 Final Gravity (FG) 1.009 1.010 Approximate ABV 4.9% 5.6% Color (SRM) 6 6 Bitterness (IBUs) 45 41 Ingredient / Instruction Sheet *YEAST SOLD SEPARATELY* Makes 5 Gallons
$29.99 - $34.99
Carbonation Keg Lid
A corny keg lid with an extra gas post which connects to a .5 micron stone. Simply connect your gas quick disconnect to the included fitting on the lid and allow carbonation to begin. How to use this product:Beer must be stored cold 34–40°F1. Preboil the stone for 2–3 minutes before using. This assures you that your stone is sterile and any residual oils have been boiled off.2. Sanitize the whole keg lid before submersing into your keg filled with beer.3. Set your PSI on your regulator to 3–4psi and attach your gas in fitting to the body connect on the lid. Leave keg at this pressure for 1 hour.4. Raise your pressure 2PSI per hour until you reach 10–12psi. Leave it at 10–12psi for 24 hours. Pour a pint and test the carbonation. If you think your beer needs more CO2 leave for another 4–6 hours and have another pint.5. Remove carbonation lid after carbonation level is satisfactory. Return original keg lid for long term storage.
$66.00
Camp Chef Propane Burner
Compact and powerful, this little cooker is a homebrewer's dream! The 60,000 btu maximum output high-pressure burner heats mass amounts of liquid in a hurry and will maintain it at boiling temperatures making it a great cooker for home water bath canning, sea food boils, and of course—home brewing beer! If you've been brewing on the stove top and looking to take your brew days outside, the Camp Chef Burner is great intro burner for full volume boils. And thanks to its compact size, it won't take up a ton of room when stored between batches! Features: Includes 3 ft. hose and regulator Includes detachable steel legs for stability and portability High output High pressure Boils and heats water very quickly Durable, rugged design built to last Specs: Dimensions (base): 20 in. x 20 in. Cooking Area: 15 in. diameter Cooker Height: 16 in. Cooker Weight: 11.5 lbs. Output: 60,000 BTUs/Hr. Burner Warranty: One Year Propane tank is not included.
$119.99
Camlock Type F
Type F camlock disconnect fitting. Male camlock with 1/2" Male Pipe Thread (MPT). 304 Stainless steel construction. 150 psi working pressure.
$8.80
