Newest Products

Stainless Steel tailpiece with 1/4" barb.

Read more less

Developed by Hop Breeding Company and released in 2014, Ekuanot HBC 366 features pronounced aroma characteristics and extremely high oil content. This variety bursts out of the spring soil in vibrant yellow and gradually matures to a deep green color by fall harvest.Aroma: Specific descriptors include bubblegum, citrus, stone fruit, tropical, woody Alpha Acid: 13-15.5% All repackaged hops are nitrogen flushed to preserve freshness. Ekuanot® is a trademark owned by Hop Breeding Company, L.L.C. 

Read more less

An economy, stainless steel sulfur burner basket with integrated hanging rod and silicone bung. To use, place a sulfur stick or disc in the basket, light, and lower it into the barrel.  A good option to catch drips and keeping the burning sulfur off the inside of the barrel.  The integrated bung keeps fumes in the barrel where it's effective. Bung DImensions: 2 1/4" Top, 1 3/4" Bottom Diameter Overall Length: 13"

Read more less

This Duotight plug is used to block up your 9.5 mm (3/8") tees, elbows or other fittings for gas leak testing or simply to plug an unused section. Features: Insert plug and firmly push to connect Release plug by pushing in the collet on the Duotight fitting Suitable for both gas & beverage applications Made from food-grade acetal plastic Temperature rated to 212°F (100°C) 

Read more less

This Duotight plug is used to block up your 8 mm (5/16") tees, elbows or other fittings for gas leak testing or simply to plug an unused section. Features: Insert plug and firmly push to connect Release plug by pushing in the collet on the Duotight fitting Suitable for both gas & beverage applications Made from food-grade acetal plastic Temperature rated to 212°F (100°C)

Read more less

The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style spunding valve is much more accurate than the poppet style. 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing. The blow off pressure can be set by either pairing the BlowTie with the Push-In Pressure Gauge, or by attaching it to an empty keg that has been pressurized to the desired psi.     Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends 0-40 psi pressure rating

Read more less

This Duotight to Female Beer Thread fitting is perfect for connecting gas line to keg couplers. Although it could be used with 9.5 mm EVA Barrier as a beverage line, this would only be recommended for long draw systems where the beverage line will be 20-25 ft long. Compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!  Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) 

Read more less

This Duotight to 3/4" female thread fitting can be used to connect beverage or gas line to any fitting with 3/4" MPT. Compatible with EVABarrier 9.5 mm OD Tubing (D1719). Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

This Duotight fitting with 1/4" Flare is perfect for flared gas and beverage ball lock and pin lock disconnects.  This Duotight fitting is compatible with EVABarrier 9.5 mm OD Tubing. Although this fitting would also fit a beverage disconnect, 9.5 mm OD EVABarrier is only recommended for beverage line in long draw draft set ups. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Note: Ball lock fitting and regulator not included. 

Read more less

This Duotight tee fitting is compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!  Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

This Duotight elbow fitting is compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!  Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) 

Read more less

This Duotight check valve is a great idea for protecting your regulator. It has a low opening pressure of 1 psi, and since it cannot be opened or taken apart, it is recommended for gas applications only. The internal components are made from stainless steel. Compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

This Duotight ball valve can be used as an inline shut off valve on beverage lines. Compatible with EVABarrier 9.5 mm OD tubing.Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

This Duotight fitting with 1/4" male thread is a great option for connecting gas line to regulators and manifolds that have 1/4" FPT. Comes with seated O-ring. Compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

This Duotight joiner fitting is compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!  Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

This Duotight joiner fitting is compatible with EVABarrier 8 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!  Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!  Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) 

Read more less

6" x 6" brushed stainless steel wall mount drip tray (without drain). Details: Stainless steel door mount drip tray with bold brushed finish. Robust 18 gauge Stainless Steel construction. Three keyholes on backsplash plate for easy mounting. Removal grill for easy cleaning. Finished smooth for safety and appearance with welded corners. Specifications: 304 Stainless Steel Brushed Finish Length: 6" Width: 6" Depth: 3/4" Back-Splash: 2.7" Thickness: 18 gauge No Drain Product Sheet

Read more less

12" x 6" brushed stainless steel wall mount drip tray (without drain). Details: Stainless steel door mount drip tray with bold brushed finish. Robust 18 gauge Stainless Steel construction. Three keyholes on backsplash plate for easy mounting. Removal grill for easy cleaning. Finished smooth for safety and appearance with welded corners. Specifications: 304 Stainless Steel Brushed Finish Length: 12" Width: 6" Depth: 3/4" Back-Splash: 2.7" Thickness: 18 gauge No Drain Product Sheet

Read more less

Delicious draught beer is a true delight, but the key challenge is ensuring that beer arrives to the consumer with all the freshness and flavor the brewer intended. In an ongoing effort to improve the quality of beer served at retail, the Brewers Association (BA) Draught Beer Quality Committee introduces the updated and revised fourth edition of the Draught Beer Quality Manual. The Draught Beer Quality Manual presents well-researched, detailed information on draught line cleaning, system components and design, pressure and gas balance, proper pouring technique, glassware sanitation, and other valuable advice from the experts. Also included is information on both direct- and long-draw draught systems, important safety tips, and helpful visuals for easy reference. Anyone tasked with performing or overseeing draught line cleaning will appreciate the updated recommendations reflecting current best practices. Whether you are utilizing short-term solutions like jockey boxes and picnic taps, or designing or updating a draught system, this book can help you deliver great beer. The focus on cleaning, maintenance, and proper operation of draught systems will help ensure quality beer, from effervescent German weissbiers to lightly carbonated English-style “cask” ales. Dedication to delivering quality draught beer will enhance the customer's experience with the beer you brew, distribute, and pour. This book is intended for draught system installers, beer wholesalers, retailers, brewers, and anyone with an interest in quality draught beer. Prepared by the Technical Committee of the Brewers Association. The Brewers Association Draught Beer Quality Working Group began focusing on draught beer quality at retail in 2007. Under the guidance of Ken Grossman, Founder of Sierra Nevada Brewing Co. and 2008 Chair of the Brewers Association Technical Committee, the brewing community came together to develop a set of best practices and standards to help brewers, wholesalers, retailers, and draught system installers improve and maintain the quality of available draught beer. The Draught Beer Quality Manual continues to evolve through collaborative efforts within the brewing community. Paperback: 120 pages

Read more less

Draft tower shank assembly for 2.5" diameter tower. Specifications: Shank Length: 2.25" Shank Material: Chrome plated brass Bore Size: 3/16" with 1/4" counter bore Barb Size: 1/4" Flange Material: Chrome plated plastic 

Read more less

Draft Beer CO2 regulator to nitrogen tank adapter Quickly converts a CO2 regulator into a nitrogen regulator. Converts female CGA-320 threads to make CGA-580 threads. Ideal for occasional use of mixed gas cylinders with nitrogen connection. Material: Brass

Read more less

This KOMOS double offset tower wrench is specifically designed to tighten the nut on the back of a faucet shank. The double offset allows for clearance inside of round towers and to move the handle away from the insulation or other nearby objects. These wrenches are laser cut from 12 gauge 304 Stainless Steel.Specifications: 1-1/16" 12 Point Wrench 1-1/8" 12 Point Wrench Made from 304 Stainless Steel

Read more less

Ideal for adding oxygen to your fermenter, 1/4" OD barb. Made from 316 stainless steel, 1/2" diameter, stone is 1" in length.

Read more less

Ideal for carbonating your beer or adding oxygen to your fermenter, 1/4" OD barb. Made from 316 stainless steel, 1/2" diameter, stone is 1" in length.

Read more less

Flare threads make it quick and easy to disconnect and sanitize your air stone. Made from 316 stainless steel, 1/2" diameter, stone is 1" in length.

Read more less

Author Ray Daniels provides the brewing formulas, tables, and information to take your brewing to the next level in this detailed technical manual.

Read more less

Flush and fill your bottles with ease. This filler has all the great features of the Counter Pressure Bottle Filler with the added benefit of a pressure gauge and flared connections. The gauge helps monitor pressure inside of your bottles and the flared connections make cleaning your lines a breeze. The valve has three positions: off, beer, and gas. Insert filler into the bottle in the off position, switch to gas to flush the bottle with CO2, and then switch to beer to fill your bottle. You can control the speed of your flow with the adjustable pressure relief. This filler is designed for use with 12 oz. bottles but can be used with larger formats by attaching a small piece of 1/4" tubing to the filler.

Read more less

Deluxe Bench Capper If you bottle a lot, this capper is for you! Made with heavy gauge enamel coated steel. Adjustable for different bottle sizes. Caps 26mm and 29mm bottles. Made in Italy.

Read more less

Delta is an American bred hop from a cross between the Fuggle and Cascade hops. The result is an increasingly popular brewing ingredient both for a wonderful aroma and substantial bittering characteristics.  A dual purpose hop with an alpha acid range of about 5.5% to 7% lets the Delta hop to be utilized as a bittering agent in brews like ESBs and American IPAs. It provides a distinct spicy aroma with melon and citrus notes.   All hops are nitrogen flushed and sealed to preserve freshness.  

Read more less

Rhone isolate for both red and white wines that enhances mouthfeel and color stability. In reds, gives a jammy, concentrated, soft ripe fruit character with mild spiciness. Specifications: Needs nutrients Fast fermenter Up to 16% alcohol Use 1 gram per gallon

Read more less

A white wine strain for making both dry and sweet wines, and also rosé  wines. This moderate fermenting yeast is also perfectly suited to making country style wines from fruits and flowers, as these flavours and aromas are naturally enhanced. This strain promotes body, and confers rich and full, fruit and floral aromatics. Suitable for Sauvignon Blanc, Zinfandel, Muscat, Muscadet, Dessert wines and more. Alcohol Tolerance: 14% ABV Usage Directions: No rehydration required - add direct to grape must and stir well. For best results, ferment at 16 - 24°C (61 - 75°F). Storage Recommendations: Store in a cool, dry place. 8g Sachet

Read more less

For the first time, the most exciting, groundbreaking, and uncompromising craft breweries share the recipes behind their best beers, for you to make at home. Includes 50 recipes from breweries such as Ninkasi, Deschutes, Firestone Walker, Rogue, Anchor, Boneyard, and more.

Read more less

A strain suitable for red wines, especially those intended to be light, fresh, and fruity. This moderate fermenting strain produces soft, velvety-smooth wines, with the aromatic enhancement of red berry fruits notes. Suitable for Pinot Noir, Gamay and more. Alcohol Tolerance: 14% ABV Usage Directions: No rehydration required - add direct to grape must and stir well. For best results, ferment at 16 - 24°C (61 - 75°F). Storage Recommendations: Store in a cool, dry place. 8g Sachet

Read more less