Hardware & Fittings
Silicone O Ring
This O-ring fits into the groove of the nut to enhance the quality of the seal. Made of food grade silicone, the O-ring can withstand temperatures over 450°F and is very durable.
$0.75
4" TC Gasket
EDPM gasket for a 4" tri-clamp fitting.
$3.50
Stainless Steel Street Elbow 1/2''
Stainless Steel Street Elbow for building brewing systems.
$5.50
1/4" FPT x 1/2" MPT Bushing
1/4" FPT x 1/2" MPT Bushing 304 Stainless Steel
$7.99
Lock Nut with Groove - Stainless Steel
This standard stainless steel locknut features a groove on one side that can hold a silicone O-ring in place for a superior seal.
$3.99
1.5'' Tri-Clamp x 3/4'' MPT, Stainless Steel
A 1.5" Tri-Clamp to 3/4" Male Pipe Thread.304 Stainless Steel
$18.00
Pipe Thread Tape
1/2" x 520" PTFE Thread Seal Tape
$2.00
Female Stainless Steel Quick Disconnect w/ 1/2'' FPT
Female Stainless Steel Quick Disconnect with 1/2'' Female Pipe Thread When used in conjunction with the male quick disconnect, these quick disconnects seal up completely regardless of the liquids direction of flow, while remaining simple and easy to use. It features a 1/2" Female National Pipe Thread on the end for easy connectivity to almost anything. The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60 psi or less. Gasket temperature range is -40° to 250° F. Open port, does not have shut-off. Note: This product will NOT work with Brass or Plastic Quick Disconnects.
$16.99
Brass Hose - Female x 1/2 in. fpt Swivel
Female Garden Hose Thread on one side, 1/2" FPT on the other. Useful piece for adapting Quick Disconnects to Wort Chillers or Water Filters.
$4.50
BrewZilla Flexible Recirculation Arm
This simple upgrade for the BrewZilla is perfect for positioning your recirculating wort or sparge water over the grain bed and makes it even easier to use the unit's built-in pump for transferring wort to your fermenter or for CIP at the end of the brew day. Pairs perfectly with the Sergeant Sparge Head for mashing and sparging, as well as the BrewZilla Spinning Spray Rotor to clean your kettle. Please note: Pictured Camlocks sold separately. You will need a Type F camlock fitting in order to attach the Flexi Arm to your BrewZilla recirculation piping. Specifications: 304 Stainless Steel Fitted Female 1/2" Hex Nuts Ends Silicone Washers Included Length 31.5" KegLand Part Number: KL15097
$11.00
2" TC x QC (Quick Connect)
Out of all the ways to attach silicone tubing to your brew kettle or conical, quick connect ball lock fittings are a great option. The ease of connecting/disconnecting and cleaning is unmatched by standard hose barbs or cam locks. These fittings can easily be attached using one hand even with heavy brewing gloves. The inside diameter of this quick connect fitting is 1/2". This creates a full port design and will not restrict flow going through the barb. Specifications: 304SS 2" TC x QC 1/2" ID
$18.00
2" TC x 5/8" OD Barb
Not all hose barbs are created equal! The Spike Brewing special 2" TC x barb fitting features a shorter profile and over sized diameter barb. The over sized barb (5/8" OD) is specially designed for 1/2" Silicone tubing. The larger size does two things: It stretches the tubing over the barb creating a tight fit requiring no hose clamps. The inside diameter of our barb is 1/2" compared to standard 1/2" barbs which have a smaller 3/8" size. This creates a full port design and will not restrict flow going through the barb. Specifications: 304SS 2" TC 5/8" OD 1/2" ID
$16.00
2" TC Sight Glass
The Spike Brewing engineers have totally redesigned the 2" TC sight glass from the ground up! Standard sight glasses use 4 long bolts that need to be tightened in a criss-cross pattern to get even pressure to avoid leaks. Their new design is made up of only 5 parts compared to 26 parts in a standard sight glass. No tools are required to assemble or disassemble; simply twist the knurled end cap off. The glass is also protected by the stainless guard which protects the glass from even the clumsiest brewer. The sight glass allows for direct attachment to the bottom port of our conicals. The sight glass allows for monitoring flow, color and clarity. A sight glass is also helpful when collecting yeast. Specifications: 2" TC 304 stainless steel Extra thick Pyrex glass 6” long 25% lighter than previous design **A 2" gasket and clamp will need to be purchased separately if you do not already have spares**
$75.00
3" EPDM Gasket
EPDM gasket for 3" tri-clamp connection. Temperature rated from -30°F to 300°F.
$2.20
Garden Hose Adapter, Male ght x 1/2" mpt
Brass garden hose adapter. Male garden hose thread to 1/2" male pipe thread (mpt).
$5.49
Three Piece Stainless Ball Valve 1/2''
This 304 stainless steel three piece ball valve can be easily taken apart for cleaning. Both inlet and outlet are 1/2" female pipe.
$24.95
1/2" High Temp O-ring
High temp o-ring fits over 1/2" pipe nipple.
$1.25
5 pk Replacement Seal Female Camlock
Replacement seals for female type B, C, and D camlocks fittings. Pack of 5.
$3.99
Hex Nipple, 1/2'' x 1-3/4'' Threaded, Stainless Steel
1/2" MPT x 1-3/4" Threaded Hex Nipple Stainless Steel
$6.50
Male Stainless Steel Quick Disconnect w/ 1/2'' Barb
Male Stainless Steel Quick Disconnect with 1/2'' BarbThis quick disconnect seals up very well without a lot of work in connecting them. It features a 1/2" Barb on the end for easy connectivity to any 1/2" tubing you may have.The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60 psi or less. Open port, does not have shut-off. Note: This product will NOT work with Brass or Plastic Quick Disconnects. Made from 304 stainless steel.
$13.50
1.5" TC x QC (Quick Connect)
Out of all the ways to attach silicone tubing to your brew kettle or conical, quick connect ball lock fittings are a great option. The ease of connecting/disconnecting and cleaning is unmatched by standard hose barbs or cam locks. These fittings can easily be attached using one hand even with heavy brewing gloves. The inside diameter of this quick connect fitting is 1/2". This creates a full port design and will not restrict flow going through the barb. Specifications: 304SS 1.5" TC x QC 1/2" ID
$17.00
ForgeFit - 1.5" EPDM TC Gasket - Red
EPDM gasket for 1.5" tri-clamp connection with a temperature range of -30°F to 300°F. Use color-coded gaskets for different applications to avoid cross contamination. Red is commonly used to mark Brettanomyces rubber in breweries that separate brett from brewing yeasts.
$2.00
Full Coupler - 1/2 in - Stainless Steel
This 1/2" stainless steel full coupler is corrosion and rust-resistant, making it a reliable, long-lasting solution for your plumbing needs. Perfect for attaching two pieces of pipe in a leak-proof connection.
$4.99
ForgeFit® Stainless Tri-Clamp Barb - 3/4 in. x 1.5 in. T.C.
A 1.5" Tri-Clamp to 3/4" barb fitting.304 Stainless Steel
$18.99
1.5" TC x 5/8" OD 90° Barb
This elbow will connect to any 1.5" TC port. It features an oversized barb designed to use with 1/2" tubing. This creates a full port opening for unrestricted flow and a tight seal that requires no hose clamps. Specifications: 1.5" TC 304SS Oversized 90 degree barb for 1/2" tubing
$17.00
1.5" TC Thermowell
Spike Brewing's thermowell features a 1/4" temp probe opening on the outside which is mounted to a 1.5" TC fitting. This allows it to attach directly to the sanitary TC fitting on the conical. It also allows for an optional digital temp sensor to be attached. The probe is completely sealed from the outside. Pro Tip:The thermowell can be packed with thermal grease to help temperature response times. Specs: 1.5" TC 304SS 4” long 0.250" ID
$30.00
1.5'' Tri-Clamp Ferrule, Stainless Steel
1.5" Tri-Clamp Ferrule304 Stainless Steel1-13/32" ID1-3/32" Length
$10.00
1.5'' Tri-Clamp Gasket with Mesh Screen
Teflon gasket with 304 stainless mesh screen for 1.5" tri-clamp connections. Can be used as a filter screen to trap large particulates passing through T.C. fittings. Often used for distillation to retain activated carbon for filtering neutral spirits or used in pot distillation to retain botanicals in the vapor stream. This screen can also be used with the 1.5" Hop Bong as an inline filter. The screen has a mesh size of 7 which will block particles larger than 2.83mm or 2830 microns. This slightly larger mesh size makes this screen ideal for use in a distillation basket. KegLand Part Number: KL28516
$7.20
Stainless Steel Ball Valve - 3 Piece
Spike Brewing's 1/2” stainless steel ball valve screws directly into our brew kettles, no need for an additional nipple to make the connection like competitors valves. This valve is dual sided with a male (which screws directly into your kettle) and a female end (which allows for a 1/2" barb or other 1/2" fitting). The 3 piece valve completely disassembles so a thorough cleaning is easy. Specifications: Made from 304 stainless steel 1/2" NPT male end screws directly into the kettle Full port 5/8” inner diameter
$30.00
Female Stainless Steel Quick Disconnect w/ MPT
Female Stainless Steel Quick Disconnect with 1/2" Male Pipe Thread When used with the male quick disconnect, these quick disconnect seal up very well in either flow direction, without a lot of work in connecting them. It features a 1/2" Male National Pipe Thread on the end for easy connectivity to almost anything.The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60 psi or less. Gasket temperature range is -40° to 250° F. Open port, does not have shut-off. Please Note: This product will NOT work with Brass or Plastic Quick Disconnects.
$14.99
Camlock Type C
Type C camlock disconnect fitting. Female camlock with 1/2" Barb (13mm). 304 Stainless steel construction. 150 psi working pressure.
$14.50
Bushing, 1/2''FPT x 3/4''MPT, S/S
3/4" MPT x 1/2" FPT Bushing304 Stainless SteelÂ
$3.95
4" TC Clamp
A standard clamp for all of Spike Brewing's 4" TC ports Specifications: 4" TC 304SS
$15.00
1.5" TC Sight Glass
The Spike Brewing engineers have totally redesigned the 1.5" TC sight glass from the ground up! Standard sight glasses use 4 long bolts that need to be tightened in a criss-cross pattern to get even pressure to avoid leaks. Their new design is made up of only 5 parts compared to 26 parts in a standard sight glass. No tools are required to assemble or disassemble; simply twist the knurled end cap off. The glass is also protected by the stainless guard which protects the glass from even the clumsiest brewer. The sight glass allows for direct attachment to the bottom port of our conicals. The sight glass allows for monitoring flow, color and clarity. A sight glass is also helpful when collecting yeast. Specifications: 1.5" TC 304 stainless steel Extra thick Pyrex glass 5” long 25% lighter than previous design **A 1.5" gasket and clamp will need to be purchased separately if you do not already have spares**
$65.00
Blow-Off Cane
This USA made blow off cane is designed to attach to the 1.5" TC on the lid of the Spike Brewing conicals. Options:Standard: For use as a standard blow off into sanitizer 1.5" TC End: Use for a blow off into sanitzer with a barb (HERE) and/or attach the Spike Brewing pressure manifold (HERE). Specifications: 1.5" TC 304SS 15” total drop Works with every size conical Made in the USA
$45.00 - $65.00
3/4" Male ght and 1/2" fpt
This brass fitting has 3/4" male garden hose thread on one side and both 3/4" mpt and 1/2" fpt on the other.
$3.95
