Hardware & Fittings
Hose Stem, 1/2'' Barb, 3/8'' fpt
Brass Hose Stem 3/8" FPT (female pipe thread) 1/2" hose barb
$2.99 $2.25
1/4" FFL Cap Hex Nut, S/S
1/4" female flare thread stainless steel hex cap fitting.
$2.25
1/2" NPT Stainless Plug
This square head plug has 1/2" NPT threads and is made from 304 stainless steel. It can be used to plug any of the 1/2" NPT couplers welded onto Spike Brewing kettles.
$7.00
Camlock Type D
Type D camlock disconnect fitting. Female camlock with 1/2" Female Pipe Thread (FPT). 304 Stainless steel construction. 150 psi working pressure.
$15.50
$14.95
Quick Connector 1/4'' MFL x 1/2'' FPT
1/4" MFL (male flare) to 1/2" FPT (female pipe thread) quick connector. Metal parts are stainless steel.
$8.99
1.5" TC to Air Hose Quick Disconnect - Used
Air hose adapters are used to convert Tri Clamp to the standard Industrial Style 1/4 " air line connector. Lightly used
$10.00
2'' Tri-Clamp x 2'' Barb, Stainless Steel - 4 Inch Long
Barbed fitting for use with tri-clamp systems. This fitting has a 2 inch TC on one side, 2 inch barb on the other side. Use with 2 inch ID hose. The barbed stem is 4-1/2" long. 304 Stainless Steel
$25.00
11'' Sight Gauge
This 11" sight gauge is made of stainless steel and comes apart for easy cleaning. It has a 1/8" FPT on the base which would attach to a sight glass adapter.
$46.99
Steam Condenser Set | 2 in. T.C. | BrewZilla | DigiBoil
Made from high quality 304 Stainless Steel, this condenser lid is ideal for apartment or basement brewers who struggle managing steam and condensation during brewday. Easy to use and assemble, can be used with a wide range of configurations. Comes with removable end cap for adding hops, yeast nutrient or whirlfloc during the boil. (Use gloves, it will be hot!). This steam condenser set can be compatible with the 35L or 65L BrewZilla/DigiBoil with the stainless distillation lid and 2 Inch Bulkhead. This unit can allow brewing indoors without that pesky sticky steam gumming up your freshly painted interior! The End Cap can be removed for brewing salts/hops and other brewing essentials to be added during the boil. Please note hot steam through this port can lead to serious scalding, please use heatproof gloves. Not only will you get to the boil faster, but you will use less power overall to maintain a rolling boil as there will be less area for the heat to escape. No need to install inside a kitchen, or in the garage with a special range hood. Simply attach this to the Condenser Lid and run your kitchen tap or garden hose to the Duotight-compatible inlet. You don't not need super-fast flow rate to cool boiling steam into liquid. Different to distillation where you require the distillate to be under a certain temperature so that ethanol doesn't evaporate from the liquid at a high rate, with boiling wort you just need enough to form a liquid! Pretty simple. Eco-Friendly option if you have the means to save/collect the coolant water. Can be re-used on the garden or for cleaning later on. Please note the water discharging will be very hot! The Spray head can condense 0.42 gal (1.6 L) per minute while connected to 100 psi mains water. Caution: You will need to remove the Steam Condenser when you reach boil to manage the hot break and ensure you don't have a boil over when you reach boiling temperatures. Once you've completed that step, you can reattach the Condenser and leave it in place for the remainder of the boil. You Will Also Need: Distillation Lid for 35L or 65L BrewZilla / DigiBoil (Pro Sight Glass Distillation Lids coming soon) 2" T.C. Weldless Bulkhead 6.35 mm Monotight Adapter (or you can clamp directly to the inlet) Kit Includes: 5 x 2" Tri-Clamps 5 x 2" Tri-Clamp Silicone Seals 1 x 13.7" (340 mm) Long 2" T.C. Tee 1 x 7.8" (200 mm) Wide 2" T.C. Tee 1 x 2" T.C. End Cap 1 x 2" T.C. to 6.35 mm Monotight elbow cap with elongated spray head mister 1 x 2" T.C. x 0.47" (12 mm) Barb – Suitable for 3/8" (10 mm) ID Silicone tubing Some of these fittings are not sold separately
$187.00
Union, 3/8''mfl x 1/2''mpt - Stainless
Stainless Steel Flare Fitting Flare to Pipe Adapter 3/8" MFL (male flare thread) x 1/2" MPT (male pipe thread)
$13.99
Stainless - T.C. Clamp (2.5 in)
Stainless steel 2.5" TC clamp
$11.95
Stainless - 1/8 in FPT x 1/4 in Barb
Stainless 1/8 inch female pipe thread with 1/4 inch barb.
$6.30
Ss Infussion Mash Tun ReCirculation T Barb
SS Brewtech's 1/2" Re-circulation Tee Barb 304 stainless steel 1/2" hose barb 1/2" fpt on mashtun side 1/2" mpt on outer side Hose clamp and silicone tubing not included.
$15.95
Bulkhead Washer
This is a replacement stainless steel washer for Weldless Bulkhead Assemblies.1.5" OD x 1.0" ID x 0.1" Thick
$1.00
Blow Off Cane for 7 Gallon Chronical
Works with lids with 3" Tri-Clamp fitting. Blow off cane for SS Brewtech's 7 gallon Chronical Fermenter 304 stainless steel pressure relief valve included Does not include 3" Tri-Clamp gasket
$53.95
Ss Infussion Mash Tun Hose Barb - 3/8 in. to Knurled 1/2 in. FPT
3/8" Hose Barb with 1/2" fpt Knurl for SS Brewtech Mashtun 304 stainless steel Fits into SS Brewtech's mash tun bulkhead fitting Needed for MT recirculation manifold
$11.95
Grainfather Replacement Perforated Plate Seal
A replacement silicone seal for the perforated plates on the top and bottom of the Grainfather brewing system. Replaces the seal on the the Grainfather's perforated plates if yours gets damaged or goes missing. An authentic replacement part from the makers of the Grainfather
$8.99
HERMs Coil Replacement O-Rings
Set of 3 replacement o-rings for the Spike Brewing 1/2" quick connect HERMs coil fittings. Specifications: FDA approved Buna-N Sold in set of 3
$3.00
Brass Hose Quick Disconnect, Male
Garden hose thread, male quick disconnect
$7.95
Brass Hose Quick Disconnect, Female
Garden hose thread, female quick disconnect
$9.95
Brass Hex Cap, 1/4" FFL
1/4" female flare thread brass hex cap fitting.
$1.25
$4.25
Brass - 1/2 in FPT x 1/2 in Barb
Brass Hose Stem 1/2" FPT (female pipe thread) 1/2" hose barb
$5.95 $4.49
1/2'' MPT x 1/2'' Male Flare Thread, S/S
1/2" mpt x 1/2" mft, stainless steel
$5.99
1/2'' FPT x 1/2'' MFT, Stainless Steel
1/2" fpt x 1/2" mft, stainless steel
$5.99
3/8" Stainless Half Coupler
Stainless steel 3/8" female pipe thread (FPT) half coupler. Note: Half couplers have thread for insertion from one side only.
$4.99
Pickup Tube - Center
Spike Brewing's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with their full port valves which have a 5/8" flow diameter; no flow restriction. Spike Brewing's proprietary fittings uses quick connect technology. The quick connect fitting simply hand screws into the kettle and the pickup tube easily pushes in/pulls out; no tools needed. Features: One size fits all kettles Large 5/8" diameter 304 stainless tube Simply push in for seal; no tools required Proprietary stainless push to connect fitting included Sized to pick up from the bottom edge of the kettle Made in the USA
$33.00 - $45.00
