Draft Supplies
3'' Cooler Wall Coupler, SS
304 Stainless Steel Cooler Wall Coupler with 5/16" Bore. Material: Stainless Steel 304 Finish: SS Polished Length: 3" Bore ID: 5/16" Thread Size: 5/8"-14 BSP
$19.99
Plastic Boot, Corny Lid Boot
For Cornelius manufactured tanks.
$1.00
Corny Keg Lid with Tab
A replacement lid for Cornelius (Corny) kegs. This lid has a tab welded on the inside for hanging mesh bags of dry hops, oak, or other additives. Pressure relief valve and lid o-ring included.
$27.50
Beverage Ball Lock, SS Flared
304 Stainless steel ball lock liquid (beverage out) side connector with 1/4" flare connection.
$19.99
Gas Shut Off Valve with Check Valve
1/4" MFL gas shut off valve with non-return check valve. Material: Brass/Chrome Thread Size: 1/4" x 1/4"-19 BSPT
$9.99
Check Ball
Replacement check ball for Taprite sanke coupler Specifications: .375 Diameter Nylon
$1.49
Gas Coupler, Pin Lock 2-Pin
This CM Becker pin lock style disconnect is made in Germany and assembled in the USA. It is for the two pin gas connection and features a short body and a 1/4" flare connection. Most commonly, you will need a 1/4" swivel nut with 5/16" barb to connect the standard 5/16" red gas line. For EvaBarrier tubing, a Duotight 8mm with 1/4 flare fitting is a common connector.
$8.00
Coupler Hose Nipple, 3/8'' Barb
Sanke Coupler Hose Nipple, 3/8" Barb For use on the gas side of a sanke coupler. Fits into concave check valve.
$3.69
NukaTap Black Chrome Plated Tap Handle
Black chrome plated tap handle. 2-5/8" tall. 7/8" wide at the top of the knob.
$8.80
Elbow Tailpiece, 1/4'' Barb, Stainless Steel
Stainless Steel tailpiece with 1/4" barb.
$6.95
Duotight - 8 mm (5/16 in.) x 9.5 mm (3/8 in.) Reducer
This Duotight reducer is used when stepping down from 9.5 mm OD to 8 mm OD EVABarrier tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$3.30
Wing Style Coupling Nut
Don't worry about having a wrench available with a wing style coupling nut. Just tighten by hand. Specifications Material: Chrome Plated Brass Thread: 7/8"-14 (5/8" BSP) (U.S. Beer Industry Standard)
$3.85
5/16''x 3/8'' Splicer - Stainless Steel
Beer line 5/16" x 3/8" stainless steel barbed splicer. Splices 1/4" I.D. Vinyl to 5/16" I.D. Vinyl 1/4" I.D. Vinyl to 3/8" I.D. Poly 5/16" I.D. Poly to 3/8" I.D. Poly Specifications Type: Straight Connectors Material: 304 Stainless Steel I.D.: 1/4"
$3.99
KOMOS® Premium Dual Gauge CO2 Regulator | Tool-Free One-Handed Tank Connection | 0–60 PSI
The most high-quality KOMOS regulator, featuring an integrated nut-hand-wheel that allows for effortless, one-handed tightening to your CO2 cylinder Internal components are accessible from the backplate for easy cleaning and servicing Includes a Duotight adapter for EVABarrier tubing and a 1/4" flare fitting with barb, allowing for quick and adaptable gas line setups The PRV is rated to 65 psi and can be swapped out with 17-psi, 35-psi, or 100-psi rated PRVs if desired Rubber gauge protectors safeguard gauges from potential damage Compatible with standard US CO2 tanks The robust body and precision diaphragm provide high flow rates, and the pressure can be easily and precisely adjusted with the hand dial. Extra thick stainless gauges come with rubber bumpers for added protection. The dial faces are triple-scaled to read in psi, bar and kPa. The PRV is rated to 65 psi (4.5 bar) for added safety while in use. Comes with male flare thread gas-out with included 1/4" barb and nut. Easily swap out the barb to a different size if desired. On the back of the regulator body are three M6 screw holes for mounting (screws not included). Each KOMOS regulator includes a Duotight Adapter, allowing for quick connection of EVABarrier draft tubing for a solid, yet easy to change, way of connecting gas line. Add Duotight Tees to easily split the line to multiple kegs. Features: One-handed Cylinder Tightening: Attach the regulator to your CO2 cylinder effortlessly with one hand using the integrated nut-hand-wheel. No separate spanner or wrench is needed! This is made possible by a new spigot seal design that compresses easily without the risk of damage or leaks. Simplified Self-Servicing: Maintain your regulator with ease by accessing the internal components from the backplate. Simply use an 8mm hex/Allen key to remove the regulator knob and access the internals for cleaning, eliminating the need for a vise or specialized tools. Flared Output: The regulator features an output with 1/4" male flare connection. Each regulator comes with a 1/4" barb and nut as well as an 8mm Duotight adapter for use with your preferred tubing. Triple-Scale Gauge: Monitor your CO2 pressure accurately with the Class 2.5 gauge, featuring PSI, bar, and kPa scales for easy reading (+/- 2.5% accuracy). Durable Seat Cap Assembly: The new seat cap is constructed from ultra-high molecular weight polyethylene, providing exceptional resistance to wear and tear. This robust design minimizes the risk of scratching and brass filings, which can lead to pressure creep, even under demanding conditions like forced carbonation. Reinforced Steel Gauges: Benefit from enhanced durability with thicker steel gauges built to withstand rigorous use. Color-Coded PRV: This regulator includes a 65 PSI green PRV (pressure relief valve). This can be swapped to the Red (35 PSI) or Gray (100 PSI) PRV if desired. Easy Mounting: Integrated M6 mounting holes allow for secure and convenient installation. Note that the nut-wheel needs to be removed for flush mounting. Specs: 0–60 PSI operating range Low pressure gauge reads from 0–100 Pull ring PRV rated to blow off at 65 PSI 1/4" & 5/16" barb fittings included Duotight adapter for EVABarrier tubing included Standard US CO2 Threads (CGA320) Gauge protectors M6 mounting screw holes Made in accordance with AS 4267
$75.00
Forward Sealing Beer Faucet – Stainless Steel
With forward sealing faucet technology, these stainless steel faucets from Krome Dispense give you a clean, sanitary, drip-free seal every time. Other tap designs require you to replace the tap on the font when changing from one beer style to the next. Forward Sealing Faucet allows you to simply unscrew the standard spout and attach a range of different spout options to suit your beer style. The forward sealing design this faucet shuts off the flow of beer at the front of the tap which will keep wild yeast and bacteria out of the interior of the tap body. This design will also keep your faucet moist. Since it is not drying out you will not get a sticky tap so the opening will always be easy. This faucet uses a threaded spout that can quickly and easily be removed and replaced with a range of other spouts including: Growler Filler – features a 1/2″ barb for easy growler filling Stout Spout – features an internal creamer disc for the perfect pint Ball Lock Post – allows for easy fill of smaller kegs or connect a counter pressure filler or line cleaner. Made from Stainless Steel Eliminate the need to ever replace your beer taps again. The modular, threaded spout is compatible with Intertap/Nukatap faucets. Reduces the chance of off flavours transferring to your beer while you pour.
$25.99
KegLand Oxebar Mono PET Keg | Ball Lock Adapter Tapping Head
PCO38 threaded tapping head pairs perfectly with Oxebar Mono PET Kegs for a lightweight, affordable draft dispensing system Dip tube features a filter attachment to keep solids in the keg and out of your glass Includes liquid and gas ball lock posts and pull-ring PRV rated to 36 psi This handy PCO38 Tapping Head assembly is a great way to get into kegging. Using standard homebrew ball lock disconnects, this is a convenient, light weight, robust and inexpensive solution to kegging beer, cocktails, kombucha, wine, and other beverages. This PCO38 tapping head assembly has been designed to suit standard PCO38 bottle necks such as the 4L Oxebar Mono PET Keg. KegLand utilizes quality engineering plastics and efficient injection stretch blow mould processes to manufacture economical kegs and tapping heads for both homebrewing and commercial beers. The plastics used in the tapping head can withstand a wide range of chemicals used in the brewing industry and relatively high temperatures (212°F / 100°C). The Ball Lock Tapping Head kit comes with 2.5 BAR (36 psi) PRV, liquid and gas ball lock posts, and dip tube with filter attachment.
$21.99
KegLand Oxebar Mono PET Keg | Ball Lock Keg | Floating Dip Tube | 5.2 Gallons | 20L
This 5-gallon keg is lightweight, compact and has high oxygen barrier properties with 3x better (meaning less) gas transmission than traditional PET grades of plastic making it suitable for beer storage or other oxygen sensitive carbonated and non-carbonated beverages. The included Ball Lock Tapping Head comes complete with Red & Yellow Ball Lock Caps for gas and beverage, floating dip tube with filter screen, and pull-ring PRV. Molded handles make it easy to remove the tapping head for cleaning and also allow you to stack the kegs on top of each other, even with your ball lock quick disconnects in place. Being made from the Mono Barrier PET Polymer Matrix, rather than stainless steel, this keg is lightweight and an ideal choice for draft dispensing on the go. But with all the key features of a standard corny homebrew keg, plus the added feature of the floating dip tube, the Oxebar Mono Keg makes for an affordable keg option for home dispensing as well. Fit up to 3 of these bad boys in a KOMOS Standard or Deluxe Kegerator, or fit up to 6 in the KOMOS Double-Wide Kegerator. Includes: 20L Amber Mono Barrier PET Oxebar Keg Dual PCO1881 Lid Assembly with Oxebar Black Handles Green Pull Ring PRV (65 PSI) Silicone Floating Dip Tube w/ Filter Attachment Red & Yellow Ball Lock Quick Disconnect (QD) Caps Specs: Height: 25.1" Diameter: 9.2" Volume: 5.28 Gallons
$54.99
KOMOS 3" Stainless Shank Assembly
This stainless steel shank assembly includes a back nut, plastic collar (flange), and a 3/16" tailpiece with hex nut and gasket. If desired, the barb can be removed and swapped for a different size or replaced with a Duotight x Beer Thread Adapter. This size of beer shank is a popular choice for building your own custom draft system. Typically installed in the door of a refrigerator or the wooden collar of a converted chest freezer (keezer). Sizing Note: The shank’s listed size refers to the total length of threaded pipe. Approximately 1-1/8” are needed to account for the thickness of the finishing collar on the front and the space for the locknut on the back. Please take this into account when sizing the shank for your project. Installation Note: On a fridge there are generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling. Dimensions: 4-1/4" - Total Length (Tip to Tip) 3-1/8" - Shank Length (Without Nut & Nipple) 2-1/4" - Thread Length 1-3/4" - Pass Through Length 3/16" Nipple California Recipients: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
$19.99
12.3mm Stepless Oetiker Clamp
Stepless Oetiker Clamp, Size 12.3 for 7/16" OD tubing
$0.60 - $11.00
KegLand Core 360 Mini CO2 Regulator
The new Core 360 Mini CO2 Regulator from KegLand represents a huge jump forward in the mini regulator market. After much feedback on how to make mini regulators more compact, sturdy and efficient, the brilliant engineers at KegLand have come up with this mini-beast. The analog gauge is removable and can be swapped out with a gauge of a different pressure range or it can be swapped out for the Digital Mini Pressure Gauge The heavy-duty chrome-plated solid cast brass body will stand up to years of abuse, and is well-suited to protect the mini pressure gauge. A unique 2-step cartridge installation process results in zero gas loss. First the cartridge is fully threaded into the unit to form a seal before it's opened, then the actuator pin is threaded down to puncture the cartridge and release gas into the regulator. The included bushing adapter is ready to accept 16g 3/8"-24 UNF threaded cartridges, and with an additional adapter (coming soon!) you can switch to 74-gram 5/8"-18 UNF threaded cartridges. The gas outlet can be swapped between a female flare connection for flare ball lock disconnects and a 6.5mm Duotight-compatible barb for use with draft line. The barb is a great option for dispensing commercial kegs. There are also two potential outlets at either the side or the front of the regulator. This makes it easy to orient the regulator depending on whether you're using plastic or stainless steel ball lock disconnects. If you remove the 16g cartridge bushing, you'll find TR21-4 female threads for use with SodaStream gas cylinders. These can be a great option for mobile dispensing— they provide much more gas than a CO2 cartridge and are more easily transported than a full CO2 tank. Includes: KegLand Core 360 Mini Regulator 6.5mm Duotight-compatible hose barb Female Flare Fitting for MFL Disconnects Port end cap 65psi Green PRV SodaStream to 16g thread bushing Instruction Manual
$83.00
O-Ring - Keg Post - Blue
Replacement o-ring for Cornelius keg post.
$0.50 - $3.99
Petrol-Gel® Sanitary Food Grade Lubricant
Lubricates & protects o-rings & other kegging equipment Petrol-Gel is the purest of lubricants, made with an odorless, tasteless, high viscosity index paraffinic base oil. Petrol-Gel is compounded with appropriate food grade additives to meet the performance demands for all recommended applications. Authorized by USDA as a lubricant for use where there is incidental contact with food. Use on valves, pistons, pumps, O-rings, guides, slide mechanisms, & more. Tasteless & odorless Will not taint beer USDA Rated H-1 FDA Approved Impervious to water Operating Temp 0 - 185F High melting point 195F Technical white grease Valves, pistons, pumps, O-rings, guides, slide mechanisms, & more. 4 ounce tube
$7.99
Carbonator Reactor Carbonation Keg Lid
Nothing is more refreshing that having your own soda water on tap at home. SodaStream units are great but filling up those tiny 1L bottles is a pain and those small CO2 cylinders run out fast and are expensive to swap. Solve this problem once and for all with the Continuous Soda Carbonator Keg Reactor Solution. KegLand has invented this really easy-to-use keg lid that attaches to a standard ball lock keg. Setup: Position the keg inside your fridge or kegerator (ideally below 40°F). Attach your beverage draft line to the soda water out post. Attach your gas line to the gas-in post. Set your CO2 regulator to 30-50 psi, depending on how highly carbonated you like your soda water. We highly recommend using a check valve on your CO2 line. On first use, purge the air from the headspace of the keg. Connect the mains water to the water inlet post on the lid of the keg. It is recommend to also use a check valve on your mains water line to prevent soda water from going back into your house mains. Depending on your mains water pressure, you may need to reduce it using the Duotight In-Line Regulator. For the Carbonator Keg Lid to work well, the mains water pressure should be 30-40 psi higher than your regulator set pressure (from Step 4). That's it. This simple unit will give you continuous soda water connected to your mains water.
$77.00
Manifold Add On Assembly
Use this add on assembly to expand your existing modular gas manifold. Includes a shut off check/ball valve, one tee and a connecting nipple.
$15.50
Intertap Growler Spout
Easily attach this spout to your Intertap faucet. Attach tubing to the 1/2" barb to make filling growlers a breeze. Made from 304 stainless steel.
$6.00
Tubing Quick Disconnect, 5/16'' barb x Female
Female quick disconnect fitting with a 5/16" barb. Includes a shutoff that seals the valve when not connected to tubing.
$11.99
Stainless Carbonation and Line Cleaning Cap - Duotight Compatible
This stainless steel ball lock cap features soda bottle threads, allowing you to convert a soda bottle into a pressurized growler. It is compatible with both gas and liquid ball lock disconnects. Also works well for cleaning draft lines. Simply add line cleaning solution to a soda bottle, attach it to the draft line, and open the faucet to push solution through. This is a direct replacement to ball lock fittings included with the FermZilla pressure kit. It can also be attached to the FermZilla collection container, enabling you to purge the collection container of oxygen. 28mm PCO 1881 Threads This version features a 6.5mm Duotight compatible stem. Use the 8mm or 9.5mm reducer to attach EVABarrier draft line.
$15.50
Ball Lifter, For Draft Cleaning Kits, Sanke
Keg Coupler Ball Lifter
$3.00
Micro Matic Co2 Inlet Seal
Nylon CO2 Inlet Seal for Micro Matic Premium Regulators.
$2.00
1/4'' MFL Gas Shut Off Valve
Brass shut off valve with check valve. !/4”MFL x 1/4” NPT
$11.95
Replacement PRV (100 psi)
The most common relief valve. Fits most Cornelius and Firestone style kegs. Long body with spring with gray top and pull ring. Max. pressure rating: 100 psi
$8.80
Co2 Disconnect Nipple with Hose Barb
If you use different kegs and couplers on a normal basis, save time by add quick disconnects to your draft systems gas line tubing. Place a quick disconnect fitting in the gas line and no tools are needed to disconnect from the gas source. Simply pull back the sleeve on the female side and the connection separates and the gas is shut off. Note: To make a complete set please order the Disconnect Air Coupler. Specifications: Connection: Male Side Length: 2" Barb: 3/8" O.D. (to fit 5/16" I.D. Gas Hose) Material: Brass, anodized
$6.99
Plastic Flange, Black
Shank flange, black plastic
$3.99
Hose Tailpiece For 3/8'' ID Tubing
3/8" Hole, 7/16" Barb Shank TailpieceShank Tailpiece for 3/8" ID HoseNickel Plated
$2.00
1/4'' Beer & Gas Tubing QD Set - In-line W/ Shut-off
These disconnects feature 1/4" barbed fittings that will fit into 3/16", 1/4", or 5/16" ID tubing. The temperature range is -40F to 180F and they can handle a vacuum to 120 PSI. The internal valve spring is made of 316 stainless steel and the o-ring is food grade.
$16.99
74 gram CO2 Cylinder
This co2 cartridge is used with larger, more robust mini regulators. One canister will push between 1-4 five gallon Cornelius style homebrew kegs, depending on how it is used and the CO2 consumption required. Please Note: This unit is not compatible with the Torpedo Mini CO2 Regulator due to the gap between the threading and the tip of the cartridge. For those units select this link for the recommended 74 g cartridge. 5/8-18 UNF threading 74 g cartridge Shipping Restricted: This product is only eligible for ground shipment within the contiguous 48 states. C02 Warning: Warning, this product is a gas that is under pressure. Please make sure that when in use the bottle remains in an upright position. Please use extreme caution when using.
$18.00
