Draft Supplies

Manufactured by Krome Dispense, the shank is made from stainless steel 304, is 3-1/8” long and has 3/16” Bore ID.  Includes black plastic flange, coupling sleeve, snap ring, and coupling nut. Stainless steel will not impart any off-tastes and will not tarnish like brass or pit like chrome.  Stainless is a great choice for all beer, wine, cocktails, or cider. Specifications: Material: 304 Stainless Steel Length: 3-1/8" Bore ID: 3/16" Thread Size: 5/8"-14 BSP Made in India.  

Read more less

Plastic snap clamp for 3/16" I.D. vinyl draft hose.

Read more less

Portable CO2 charger that eliminates the need for costly CO2 tanks & hoses. Pressurizes any 3 or 5-Gal corny keg. Works on either ball-lock or pin-lock fittings with 1/4" flare connection. Cartridges and connectors are not included.

Read more less

Replacement regulator pressure gauge 0-3000 PSI 1/4" NPT Right hand threads

Read more less

Draft Beer CO2 regulator to nitrogen tank adapter Quickly converts a CO2 regulator into a nitrogen regulator. Converts female CGA-320 threads to make CGA-580 threads. Ideal for occasional use of mixed gas cylinders with nitrogen connection. Material: Brass

Read more less

This neoprene washer seals the shank and opening on the inside a cooler wall. This prevents water and moisture from leaking into the cooler box wall.

Read more less

Curved beverage (liquid) out curved dip tube for 5 gallon Cornelius style ball lock kegs. Stainless Steel.  

Read more less

This Micro Matic faucet is designed for performance and built-to-last. The 304 Stainless Steel Faucet delivers on style, purity, and quality! This signature faucet is the most common in the industry, capable of dispensing beer, wine, cocktails, teas, or cold brew.  The 304 Faucet is constructed with 304-grade stainless steel contact surfaces, preventing 'off-tastes' for the best beverage purity. The stainless steel body is polished to an attractive, bright finish that won't tarnish like brass or pit like chrome. It's rugged stainless steel lever makes it ideal for larger, heavier faucet handles. Whether you are looking for a faucet for commercial use or for your home bar, the 304 stainless steel faucet is one of the best beverage dispensing faucet on the market. FEATURES A distinctive style that looks great on any draft tower. Highly polished exterior surface for a brilliant chrome-like finish Constructed of 304-grade stainless steel components – won't taint beverage flavors Stainless steel body will not pit or tarnish Dispense a wide range of beers, wine, kombucha, cocktails, cold brew, or any other beverage Stainless steel lever is more durable than brass when used with tall, heavy handles Easy to disassemble and clean NSF certified Faucet fits U.S. specification knobs and shanks Made in the USA 🦅🇺🇸

Read more less

Replacement poppet valve for all CMB ball lock disconnects.

Read more less

This spring fits the Gen 1 NukaTap only The NukaTap flow control faucet is the world's only forward-sealing flow control tap that can use an auto close spring.  By inserting the spring between the flow control device and NukaTap shuttle, the tap will automatically close when you let go of the handle. This is perfect for customers who may not be diligent enough to remember to completely turn off the tap after each pour. Or for those with little kids or pesky cats that knock everything around! This very inexpensive spring can save you from emptying an entire keg and then losing a whole bottle of gas. Please note: this spring is not compatible with the standard non-flow control NukaTap faucet.

Read more less

This stainless steel nitrogen stout faucet will ensure the perfect pour for your nitrogen stouts to give you that creamy mouth-feel that Guinness and other stouts are famous for. Specifications: Material: 304 Stainless Steel Finish: Polished Body Thread: 1-1/8" 18 UNEF Lever Thread: 3/8" X16 UNC Lever Material: Brass Spout Material: Stainless Steel Approvals: NSF Certified Made in India

Read more less

90 degree barbed swivel elbow stem and nut. Specifications: Barb with fit 3/8" ID tubing. Nut is a 1/4" flare fitting. 304 Stainless Steel.

Read more less

A shorter style plastic faucet handle with rounded top. Measurements: 2" Tall 1-1/4" Top Diameter 13/16" Bottom Diameter

Read more less

If you use different kegs and couplers on a normal basis, save time by add quick disconnects to your draft systems gas line tubing. Place a quick disconnect fitting in the gas line and no tools are needed to disconnect from the gas source. Simply pull back the sleeve on the female side and the connection separates and the gas is shut off.   Note: To make a complete set please order the Disconnect Tailpiece or Disconnect Nipple with Hose Barb. Specifications: Connection: Female Side Length: 3-1/4" Barb: 3/8" O.D. (to fit 5/16" I.D. Gas Hose) Material: Brass Shut-off: Built in

Read more less

Beer line 3/8" x 3/8" stainless steel barbed splicer. Splices 5/16" I.D. Vinyl to 5/16" I.D. Vinyl 5/16" I.D. Vinyl to 3/8" I.D. Poly 3/8" I.D. Poly to 3/8" I.D. Poly Specifications Type:  Straight Connectors Material:  304 Stainless Steel O.D.:  3/8" I.D.:  1/4"

Read more less

D system Keg coupler Chrome-plated Body & Probe US Sankey keg coupler to dispense draft beer from the keg. Tap the keg with ease with this lever handle style coupler. Place the coupler base aligned over the valve. Pull the handle out and put down to lock the coupler in this position. You can now enjoy an uninterrupted flow of your favorite beer. D system keg couplers are also called American Sankeys as they work with most North American kegs. USA and Canadian brands, like Budweiser, Busch, Coors Light, Killian’s, Labatt, Michelob, Miller Lite, Milwaukee’s Best, Molson, Moosehead, OV, Pete’s Wicked, Sam Adams use D type keg valves. Both body and probe made of Brass with Chrome plating. Durable and less expensive than SS counterpart. D system keg coupler is the predominant valve system used by most domestic and commercial breweries in the USA. This is a domestic keg tapping device for US local beers that draws beer out from kegs. Use a reliable and durable keg coupler. Choose from the various options and material combinations that suit your needs best. Both coupler body and probe made of Brass material with a layer of Chrome. Durable and built for heavy-duty use in commercial places like pubs and bars.  Pressure Relief valve included for safety.  Releases overpressure gas at 56 – 65 PSI All Krome keg couplers are NSF approved.

Read more less

This insulating neoprene sleeve slips over your draft tower to keep your draft lines icy cold. The KOMOS draft tower sleeve was designed to fit the KOMOS kegerators like a glove, but can be used with most 3" and 4.5" draft towers. The sleeve comes without holes so it can be customized to fit your faucet arrangement, whether it be single, double, or triple tap. Made from 7 mm thick neoprene. Installation: Remove the faucets from the tower, keeping the shanks in place Pull the sleeve down over the tower Mark the position of the shanks and use a sharp pair of scissors to cut a hole in the sleeve Stretch the hole over the shanks and reattach the faucets

Read more less

Stainless Steel, Stepless Oetiker Clamp This style of clamp tightens in an exact circle, making them ideal for use with draft lines.  20.5mm for 3/4" OD Tubing.  (17-20mm OD) Stepless Clamp Tool sold separately.

Read more less

This tower cooler will help reduce initial use warm beer and foam by blowing cold air up from your refrigerator into your tower. Kit Includes: Fan box 12V power pack Flexible tube

Read more less

Send different pressures to two separate kegs from the same CO2 tank with the KOMOS Dual Body Regulator. This industrial gauge regulator aims to be the last regulator you'll ever need. Large dual-body and precision diaphragms provide high flow rates, and pressure settings are quickly and easily dialed in the with hand knobs. The pressure gauges are made from thick stainless steel and come with rubber bumpers for an extra layer of protection. Triple-scale dial faces read in psi, bar, and kPa. Comes with 1/4" flare fitting with barbed outlets. Included Duotight adapters allow the regulator to be easily used with EVABarrier draft tubing. Features: 0–60 PSI operating range Low pressure gauge reads from 0–100 Pull ring PRV rated to blow off at 65 PSI Strong, robust design Highly accurate precision diaphragm Easily adjusted by hand 1/4" flare fitting with barbed outlet Duotight adapter fitting included for use with EVABarrier draft tubing Heavy duty steel gauges with rubber bumpers M6 mounting screw holes Made in accordance with AS 4267 Made in China Warning: This product contains lead and/or lead compounds, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warning.ca.gov  

Read more less

Safely and effectively control the flow of CO2 to a single keg in your draft beer system. Secondary gas regulators reduce pressure from a primary regulator or gas blender and provide this lower pressure to each individual keg. Easily add another carbonated beverage to your existing system with this Premium Plus secondary regulator; the integrated pass-thru bar saves time and provides convenience in the field. For added safety, the integrated pressure relief valve stops the gas flow if the pressure gets too high (55-65 PSI). Premium Plus regulators come standard with a tamper-evident adjustment screw and bonnet, preventing unauthorized adjustment to gas pressure which can cause service issues. FEATURES Adjust pressure from 0 to 60 PSI Built for durability: forged brass body, accurate machining, chrome-plated finish Premium quality metal gauges for durability Tamper-evident adjustment screw and bonnet Enlarged CO2 port for high volume Factory leak tested at 145 PSI Safety relief valve releases at 55-65 PSI Made in the USA Specifications: Performance: 1 Pressure / 1 Product Height: 7-1/4" Width: 3-3/4" Depth: 5-1/2" Output Pressure Gauge: 0-60 PSI, for accurate product pressure Outlet Barbs: 3/8" O.D. (To fit 5/16" I.D. Gas Hoses) Pressure Relief Valve: Safety Pressure Relief Valve Releases at 55-65 PSI Capacity: Safety pressure relief valve releases at 55-65 PSI

Read more less

1/4" brass nipple for expanding a modular gas manifold. Right hand thread.  

Read more less

Shank flange, stainless steel

Read more less

Replacement O-rings for Intertap faucets.

Read more less

Perlick® 425 Series replacement o-ring. Also fits 525 and 575 series faucets.

Read more less

Our quick disconnect locks into place with an audible "click," creating a secure, leak—free seal every time. They also allow quick and easy one—handed disconnections by simply pressing the thumb latch. Micro Matic quick disconnect couplings provide a fast, easy and safe way to incorporate a gas shut—off in your draft beer system. FEATURES One handed operation—no tools needed to connect or disconnect Audible "click" asures your connection is secure High flow valve design for maximum flow in a compact coupling Withstand up to 120 PSI Temperature range  -40°F to 180°F (-40°C to 82°C)

Read more less

Nylon flare washers for metal-to-metal 1/4" flare fitting connections. 10 Pack

Read more less

Make a really small and useful keg system out of PET plastic bottles. Great for taking beer to a party or making your own micro/portable/mini keg system. PCO 1881 threading on all ends. Tee fitting only. Does not include Carbonation Caps or PET growler.

Read more less

1/4" Hole, 5/16" Barb Shank Tailpiece Shank Tailpiece for 1/4" ID HoseNickel Plated

Read more less

This Duotight check valve is a great idea for protecting your regulator. It has a low opening pressure of 1 psi, and since it cannot be opened or taken apart, it is recommended for gas applications only. The internal components are made from stainless steel. Compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

This Duotight fitting with 1/4" male thread is a great option for connecting gas line to regulators and manifolds that have 1/4" FPT. Comes with seated O-ring. Compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

This Duotight joiner fitting is compatible with EVABarrier 8 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!  Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

This 2-piece solid brass draft faucet cleaning attachment connects to the faucet side of a shank assembly.  Attach some 3/8" ID tubing to the barb and your ready to flush out your draft lines.

Read more less

With this beer faucet cleaning attachment, you can make sure that your beer lines undergo thorough cleaning and washing. You only need to connect this beer faucet cleaning attachment to a pressurized tank of beer-line cleaner to get the best results. Remove the faucet from the shank at the end of the line to be cleaned, and install this beer faucet cleaning attachment in its place. Then, pump the beer-line cleaner through your beer lines until they are thoroughly cleaned and free from dirt, grime, beer stone, and other contaminants. FEATURES Easy-to-attach beer faucet cleaning attachment Beer faucet cleaner attachment made of heavy-duty metal Meets U.S. industry standards Thread: 1-18"-18 Barb: 3/8" Includes washer

Read more less

5/16" X 5/16" hose splicer (for 5/16" ID hose), 303 stainless steel.

Read more less

1/2" Hole, 9/16" Barb Shank TailpieceShank Tailpiece for 1/2" ID HoseNickel Plated

Read more less