Draft Supplies
Ball Lock Post Bulkhead - Gas In
This gas in ball lock post bulkhead assembly allows you to add a ball lock post just about anywhere. Create your own pressure vessel or attach it to an aluminum gas manifolds for a quick connect option. 1/4" BSP threads and locking nut.
$14.50
3-Way Modular Gas Manifold
This modular gas manifold will allow you split one CO2 line to three of them. Each line can be turned off individually without affecting the flow to other kegs. Each ball valve contains a check valve that ensures no beer or gas can flow between the two kegs. The barbs are all 5/16" which is standard for gas line in the beer industry. If later, you decide to add an additional keg this manifold can be expanded using the Add On Assembly.
$43.00
3/8'' Barbed Tee, Stainless Steel
3/8” barbed tee, stainless steel.
$3.99
Beer Transfer Assembly, Ball Lock to Ball Lock
Transfer beer from ball lock corny keg to ball lock corny keg with this jumper assembly. Includes 4 feet of 3/16" ID draft tubing and 2 CMB liquid ball lock connectors.
$26.99
BlowTie 2 Spunding Valve | Complete Kit | Ball Lock Quick Disconnect (QD)
The BlowTie 2 Spunding Valve complete kit is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style spunding valve is much more accurate than the poppet style. The blow off pressure can be easily set using the BlowTie's integrated pressure gauge. The kit includes everything you'll need to use the spunding valve right out of the bag. The BlowTie 2 can also be upgraded with a Digital Mini Pressure Gauge. Kit Includes: BlowTie 2 w/ Integrated Pressure Gauge (0-15 psi) Kegland Red Gas Ball Lock Disconnect 8 mm OD Rigid Plastic Joiner
$29.00
Stainless Growler Filler Fitting
Fill your growlers with ease with this stainless fitting and 5/16" ID or 3/8" ID tubing. Faucet insert is 1/2" OD and the barb is 3/8" OD. Fits most standard faucets. Does not fit Intertap, Nukatap, or Perlick
$6.99
Hand Pump Pressurized Keg/Beer Line Cleaner | 1 Gallon
Designed specifically for cleaning draft lines, this hand pump pressurized keg is easy to use and doesn't need CO2 like many other line cleaning kegs. After filling the keg with cleaning solution, unscrew the beer line from your sanke coupler and attach it to the included beer thread coupler to hook it up directly to the cleaning keg. Pumps from the bottom to the top, allowing you to leave the cleaning solution in the line for 15 minutes. We recommend cleaning your lines every time you switch out a keg or every 6 weeks, whichever comes first. 1 gallon capacity Comes with a 3/16” x 5/16” hose Included Beer Thread Coupler
$54.99
2.5lb Co2 Aluminum Cylinder - Filled
Does not ship. In store pick up only. Filled 2.5 pound aluminum CO2 cylinder. Will dispense approximately 4-5 five gallon kegs before needing to be refilled. These are used cylinders that have been filled from a local vendor.
$98.00
Flare Fitting, 1/4" Male Flare x 1/4" Barb
1/4" male flare fitting to 1/4" barb. Commonly used with cold plates. Barb will fit 3/16" ID or 1/4" ID tubing.
$4.49
O-Ring - Keg Post - Green
Replacement o-ring for Cornelius keg post.
$0.50 - $3.99
Probe Seal - Micro Matic D System
Keg beer dispense heads probe seal for Micro Matic D system couplers. Listed as #4 on the exploded view photo.
$1.99
Intertap Stout Spout
Simply unscrew the normal spout on an Intertap faucet and screw this stout spout in its place to pour your nitro brews. This spout has a creamer/aerator disc inside that strips out the nitrogen gas for a creamier beer. Type 304 Stainless Steel Construction.
$14.50
Check Ball Retainer, Sanke (D + S)
Check ball retainer for sankey D and S style couplers.
$2.99
Double Offset Tower Wrench
This KOMOS double offset tower wrench is specifically designed to tighten the nut on the back of a faucet shank. The double offset allows for clearance inside of round towers and to move the handle away from the insulation or other nearby objects. These wrenches are laser cut from 12 gauge 304 Stainless Steel.Specifications: 1-1/16" 12 Point Wrench 1-1/8" 12 Point Wrench Made from 304 Stainless Steel
$14.50
Stainless Steel Check Valve
Stainless steel check valve 1/4" male flare(mfl) to 1/4"female flare(ffl) fittings
$11.95
5/16'' ID Stainless Steel Tailpiece
5/16" ID, 3/8" OD Tailpiece Stainless Steel
$3.49
Premium Plus Secondary Regulator 0-60psi
Safely and effectively control the flow of CO2 to a single keg in your draft beer system with this made in the USA, Micro Matic secondary regular. Secondary gas regulators reduce pressure from a primary regulator or gas blender, and provide this lower pressure to each individual keg. This secondary regulator comes with a single gauge with an adjustment range from 0-60 PSI range so you can quickly monitor the amount of gas flowing from the gas source to the keg. For added safety, this model has an integrated pressure relief valve that stops the gas flow if pressure gets too high (55-65 PSI). Premium Plus regulators come standard with a tamper evident adjustment screw and bonnet, preventing unauthorized adjustment to gas pressure which can cause service issues. Features Adjust pressure from 0 to 60 PSI Built for durability: forged brass body, accurate machining, chrome plated finish Premium quality metal gauges for durability Tamper evident adjustment screw and bonnet Nickel-plated valve seats for high corrosion resistance Enlarged CO2 port for high volume Safety relief valve releases at 55-65 PSI Factory leak tested at 145 PSI Made in USA Specifications: Performance: 1 Pressure / 1 Product Height: 7-1/4" Width: 3-3/4" Depth: 5-1/2" Output Pressure Gauge: 0-60 PSI, for accurate product pressure Outlet Barbs: 3/8" O.D. (To fit 5/16" I.D. Gas Hoses) Pressure Relief Valve: Safety Pressure Relief Valve Releases at 55-65 PSI Capacity: Safety pressure relief valve releases at 55-65 PSI
$69.99
Pin Lock Conversion Body Connect - Beverage Out
Convert a pin lock beverage out post over to a ball lock. Includes o-ring (not pictured) Does not include poppet valve
$8.30
KOMOS® Silicone Tailpiece Gaskets - 10 Pack
5/8" silicone tailpiece gaskets for draft shanks or keg couplers. 10 Pack of washers.
$5.99
Nukatap Counter Pressure Bottle Filler
The Nukatap Counter Pressure Bottle Filler is a great way to fill bottles directly from your taps without compromising your kegged beer’s flavor, aroma or carbonation levels. It's completely made from stainless steel with no aluminum or brass components. This enables you to use a wide range of chemicals for cleaning this device without the risk of damaging the device or accessories. It's very compact and will fit any tap with 10.0 mm inner diameter spout/nozzle or with a 3/8" thread. To use this device simply connect CO2 gas line to the filling unit and away you go. The integrated counter pressure relief valve gives you good control of the counter pressure and thus the filling speed. How fast the bottle can be filled without too much foaming depends on CO2 level, beer temperature and bottle temperature. This cannot be used with taps with a vent hole but will fit pretty much all forward-sealing taps on the market such as the Nukatap SS, Nukatap FC, Intertap, Perlick 600-series and other brands. This unit is designed to fill multiple sizes of beer bottles up to 500 mL thanks to the telescopic filling stem. We recommend starting with it fully extended, then insert the stem till your at the bottom of the bottle, purge the bottle with CO2, then press the stem all the way in to form a seal on your bottle. This unit comes complete with a wide range of accessories including carbonation caps so you can quick disconnect your beer line, Duotights so you can fit a beer line to the unit and other usefull fittings you might need. Includes: All stainless steel counter pressure filler Push-in spout compatible with forward-sealing faucets (2) 8 mm Duotight adapters for filler and NukaTap spout (2) Ball Lock Post Adapters (Red / Yellow) 19.5" length of 8 mm OD x 5 mm ID EVABarrier tubing
$87.99
16g CO2 Cartridges pack of 6
Unthreaded 16g CO2 cartridges, pack of 6.
$11.99
Faucet Adapter & Coupling Nut Kit
Includes only a faucet adapter and coupling nut so you can hook a tap to your corny keg.
$7.99
O-Ring - Keg Post - Yellow
Replacement o-ring for Cornelius keg post.
$0.50 - $3.99
Duotight Flow Control Ball Lock Quick Disconnect (QD) Beverage Out - 8 mm
If you want an easy way to balance your beer lines, this is the way to do it. One of the benefits of Flow Control disconnects is you don't need to rely on the small ID or line length to apply flow resistance. Rather than adjusting your line length or size, simply apply additional restriction directly on the Quick Disconnect (QD). This is perfect for people who want to serve a large range of beverages with differing carbonation levels without having to customize each line. Now with the added benefit of Duotight fittings built in. Please be aware that even in the fully open position these FC disconnects do have some inherent flow resistance so you should use either shorter line or larger ID line that you would when compared with traditional ball lock disconnects. The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world. Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. Enter the Duotight Ball Lock QD. The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably with no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitizing an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings (no cheap ABS plastics here) this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitizers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required. Features: Ball Lock Quick Disconnect - Bev Out Adjustable flow rate Direct connect EVABarrier tubing Compact design won't interfere with keg stacking Made from highly chemical resistant materials Dissamble by hand for quick and easy cleaning
$16.50
Keg Coupler Elbow
Helps prevent kinked tubing in low clearance situations. - 90 degree angle -Thread: 7/8“-14 (5/8" BSP) - Includes washer
$12.50
Liquid Coupler, Pin Lock 3-Pin
This CM Becker pin lock style disconnect is made in Germany and assembled in the USA. It is for the three pin liquid connection and features a short body and a 1/4" flare connection. Most commonly, you will need a 1/4" swivel nut with 1/4" barb to connect the standard 5/16" red gas line. For EvaBarrier tubing, a Duotight 8mm with 1/4 flare fitting is a common connector.
$8.00
Tubing Quick Disconnect, 5/16'' barb x Male
Male quick disconnect fitting with a 5/16" barb. Includes a shutoff that seals the valve when not connected to tubing.
$11.99
1/4” x 1/4” Splicer, 304 S/S
1/4" X 1/4" hose splicer (for 1/4" ID hose) 304 Stainless Steel
$3.49
Elbow Tailpiece, 3/16'' Barb, Stainless Steel
Stainless steel elbow tailpiece with 3/16" Barb
$6.95
Digital Mini Pressure Gauge 0-90 psi
KegLand has developed the world's most compact mini digital gauge with backlight illumination. This very compact design retains high accuracy while still meeting the desirable small form factor. This meets the growing need as mini keg systems, mini regulators and other more compact keg dispensing solutions are required. Traditional analogue gauges require a small capillary mechanism where a small pipe expands and unravels under pressure. This in turn drives a mechanical cog to rotate the gauge needle. This age-old technique works quite well especially in large gauges but as this mechanism is manufactured smaller and smaller a tradeoff between accuracy and size becomes the issue. With very small gauges such as a 27mm x 27mm Mini Gauge, it's difficult to make them better than 10% accuracy due to the physical constraints of the mechanical components. Compatible With: BlowTie 2 Spunding Valve Duotight In-Line Regulator w/ Gauge Core 360 Mini CO2 Regulator Specifications: Battery Life: More than 2 years (using the mini gauge once a day) Battery Type: CR2032 Auto Battery Saver: automatically turns off after 15 sec Size: 27mm x 27mm (1" x 1") Radial O-ring Stem: 7.8mm Bore Please note: This gauge is not suitable for measuring pressure of liquids. It is only for measuring gas pressure. If liquid gets into the pressure transducer it will damage the gauge.
$16.50
Ball Lock Post Bulkhead - Beverage Out
This beverage out ball lock post bulkhead assembly allows you to add a ball lock post just about anywhere. Use in conjunction with the gas in bulkhead to create your own pressure vessel. The included short dip tube can be replaced with a longer dip suitable to your needs. 1/4" BSP threads and locking nut.
$14.50
Dip Tube - Gas In (S/S)
Replacement gas in stainless steel dip tube for Corny style kegs.
$5.50
EVABarrier Double Wall Draft Tubing - 6 mm ID x 9.5 mm OD
EVABarrier double wall tubing is an excellent choice for all draft dispensing applications. The inner barrier is an excellent gas barrier, keeping oxygen out and CO2 in. The inner wall is also extremely smooth to prevent bacteria and other microbes from attaching to the inside surface. The outer barrier gives the tubing a decent stiffness while still remaining pliable. This makes EVA Barrier remarkably kink resistant and the perfect choice for use with Duotight, John Guest, and other push-in fittings. The 6 mm (15/64") ID size is recommended to be used as gas line or long draw beverage lines. If you intend to use it as beverage line, it is recommended to use 20-25 ft. per line for adequate flow resistance. Specifications: Inner Diameter - 6 mm (15/64") Outer Diameter - 9.5 mm (3/8") PVC, BPA , and Plasticizer Free* Outer wall prevents oxidation and CO2 loss Smooth inner wall prevents microbial growth build-up *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects.
$11.00 - $77.00
1/4'' ID Stainless Steel Tailpiece
1/4" ID, 5/16 OD Tailpiece Stainless Steel
$3.49
4-1/8″ Stainless Steel Shank Assembly – 3/16″ I.D. Bore
Manufactured by Krome Dispense, the shank is made from stainless steel 304, is 4-1/8” long and has 3/16” Bore ID. Includes black plastic flange, coupling sleeve, snap ring, and coupling nut. Stainless steel will not impart any off-tastes and will not tarnish like brass or pit like chrome. Stainless is a great choice for all beer, wine, cocktails, or cider. Specifications: Shank Material: 304 Stainless Steel Length: 4-1/8" Bore ID: 3/16" Thread Size: 5/8"-14 BSP Made in India.
$20.95
KOMOS® Matte Black Draft Tower With NukaTap Faucet(s) (w/ Duotight Fittings)
KOMOS matte black draft tower with NukaTap faucets, EVABarrier draft line, and Duotight push-to-connect fittings. These are the same tower kits included with the KOMOS Kegerator. Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing. Each tower kit comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free. Includes: Stainless steel draft tower w/ Matte Black Finish NukaTap Stealth Bomber faucet(s) Stainless steel faucet shank(s) with Duotight tailpieces EVABarrier gas and beverage tubing Draft tower mounting screws Faucet wrench 1-3 Tap Tower Dimensions: 13.4 in. tall (without faucets) 3 in. tower diameter 4.4 in. base diameter 4 Tap Tower Dimensions: 13.4 in. tall (without faucets) 4.5 in. tower diameter Interior mounting holes (does not include bottom collar)
$127.00 - $275.00
