Draft Supplies
O-Ring - Dip Tubes
Replacement o-ring for Cornelius keg dip tubes.
$0.50 - $3.99
Duotight 8mm (5/16) x 5/8 Female Beer Thread
This Duotight to Female Beer Thread fitting can be used to connect beverage line to faucet shanks instead of a tailpiece, and it's also a convenient option for connecting gas and beverage line to the gas in and bev out on keg couplers. Compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$4.80
10lb Co2 Aluminum Cylinder - Filled
In store pick up only. Does not ship. Filled 10 pound aluminum CO2 cylinder. Will dispense approximately 18 five gallon kegs before needing to be refilled or exchanged. Dimensions: 20.75" Tall x 7" wide. These are used cylinders that have been filled from a local vendor.
$175.00
Cornelius Keg Lid O-ring
Replacement o-ring for Cornelius keg lids.
$3.40
Nylon Faucet Cap
Improve the hygiene of your kegerator faucets with these nylon caps.
$1.25
iPump Picnic Tap
This pump is a budget solution for dispensing beer and cider at parties, picnics, and special occasions. Since this is a hand pump tap, it is best when dispensing a whole keg that same day or night. For use with American sanke D style kegs.
$29.99
12.8mm Stepless Hose Clamp - 7/16 in. OD Tubing
Stainless Steel, Stepless Oetiker Clamp This style of clamp tightens in an exact circle, making them ideal for use with draft lines. 12.8mm for 7/16" OD Tubing. (10.5-12.5mm OD) This will fit our 3/16" ID clear/black draft tubing. Stepless Clamp Tool sold separately.
$0.60 - $11.00
Butterfly Screw Clamp for 3/8'' ID Tubing
Butterfly screw clamps are a time-saving product. Forget about using screw drivers or other tools to tighten these clamps, all you need is your hands. This size is appropriate for the 3/8" ID tubing. 8 mm (0.31") is the minimum opening and 12 mm (0.47") is the maximum. Band and Housing are AISI #430 stainless steel. Band width is 9mm (0.39") Blue plastic handle
$1.40
Butterfly Screw Clamp for 7/16'' ID Tubing
Butterfly screw clamps are a time-saving product. Forget about using screw drivers or other tools to tighten these clamps, all you need is your hands. This size is appropriate for the 9/16" hose. 10 mm (0.39") is the minimum opening and 16 mm (0.62") is the maximum. Band and Housing are AISI #430 stainless steel. Band width is 9mm (0.39") Orange plastic handle
$1.70
Nukatap Stainless Steel Faucet
The Nukatap beer faucet features a forward sealing design. In normal rear-sealing faucets the entire faucet has to drain of beer. In forward-sealing faucets the faucet keeps beer in it so the inside doesn't have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavors transfering to your beer while you pour. Similar to the Intertap line of faucets, but with improved laminar flow and reduced first pour foam due to its lower thermal mass. The Nukatap is compatible with all Intertap spout accessories. Features: Made from stainless steel Shuttle made from TPV O-rings made from EPDM Chrome finish
$40.50
EVABarrier Double Wall Draft Tubing - 5 mm ID x 8 mm OD
EVABarrier double wall tubing is an excellent choice for all draft dispensing applications. The inner barrier is an excellent gas barrier, keeping oxygen out and CO2 in. The inner wall is also extremely smooth to prevent bacteria and other microbes from attaching to the inside surface. The outer barrier gives the tubing a decent stiffness while still remaining pliable. This makes EVA Barrier remarkably kink resistant and the perfect choice for use with Duotight, John Guest, and other push-in fittings. The 5 mm (13/64") ID size is perfect for draft applications where a longer beverage line is needed. It is recommended to use 10-12 ft. per line for adequate flow resistance. Specifications: Inner Diameter - 5 mm (13/64") Outer Diameter - 8 mm (5/16") PVC, BPA , and Plasticizer Free* Outer wall prevents oxidation and CO2 loss Smooth inner wall prevents microbial growth build-up *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects.
$11.00 - $21.50
Duotight - 6.5 mm (1/4 in.) x 8 mm (5/16 in.) Reducer
Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$2.80
2-Way Modular Gas Manifold
This modular gas manifold will allow you split one CO2 line to multiple ones. Each line can be turned off individually without affecting the flow to other kegs. Each ball valve contains a check valve that ensures no beer or gas can flow between the two kegs. The barbs are all 5/16" which is standard for gas line in the beer industry. If later, you decide to add an additional keg this manifold can be expanded using the Add On Assembly.
$33.00
Duotight Ball Lock Quick Disconnect (8mm) - Beverage Out
The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world. Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. Enter the Duotight Ball Lock QD. The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably with no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitizing an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings (no cheap ABS plastics here) this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitizers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required This particular ball lock disconnect has been designed for use with EVABarrier 8 mm OD Tubing. Due to the integrated Duotight fitting the line will simply push directly into this fitting. Ball Lock Quick Disconnect - Beverage Out Direct connect 8 mm OD EVABarrier tubing Compact design won't interfere with keg stacking Made from highly chemical resistant materials Disassemble by hand for quick and easy cleaning
$8.80
Plastic Co2 Inlet Washer
Plastic washers that will fit most brands of gas regulators. Inserts between the Co2 cylinder and regulator.
$1.00 - $7.50
Draft Line Cleaning Kit with Hand Pump
Avoid off flavors in your dispensed beverages by cleaning your kegerator lines regularly. The included metal pump makes it easy to push the cleaning liquid through the draft lines. This kit includes the following: 1 liter draft cleaning bottle 4" metal pump Single sided faucet/coupler brush Faucet wrench Note: This kit does not include the beer line cleaning detergent unless selected. Need additional Beer Line Cleaner? Warnings: Important information – Prop. 65 for CA residents. Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
$52.00 - $65.00
Butterfly Screw Clamp for 1/2" ID Tubing
Butterfly screw clamps are a time-saving product. Forget about using screw drivers or other tools to tighten these clamps, all you need is your hands. This size is appropriate for the 1/2" ID tubing. 12 mm (0.47") is the minimum opening and 20 mm (0.78") is the maximum. Band and Housing are AISI #430 stainless steel. Band width is 9mm (0.39") Green plastic handle
$1.85
Universal Keg Post O-Rings - 10 Pack
Replacement o-rings for ball lock or pin lock keg posts (body connects). 10 Pack
$4.40
1/4" ID Vinyl Draft Line Tubing
1/4" ID clear vinyl beverage and gas tubing. Accuflex Bevlex 200 PVC Tubing is used for draft beer transfer and BIB soft drink applications. Its special dual durometer construction combines a low extraction inner contact surface with a flexible outer layer to provide excellent kink resistance and taste protection. NSF-51 Listed. Inside Diameter (ID): 1/4" Outside Diameter (OD): 1/2" Clamp Size: 14.5mm Prop 65 Warning: This product contains phthalates (DEHP, DBP, BBP), a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.
$1.35 - $86.99
Hose Gear Clamp - Fits 5/16'' to 7/8'' OD Tubing
Clean, smooth edges-durable and strong. Made from 300 series stainless steel.
$1.60
Duotight In-Line Regulator | Built-In Pressure Gauge | 0-60 PSI | Liquid & Gas Compatible | 8 mm Duotight
The Duotight In-Line regulator works with both gas and liquid. The flow can easily be adjusted with the yellow adjustment knob. 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing. Features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The gauge is removable and can be swapped out with a gauge of a different pressure range.Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-60 psi Made with quality EPDM seals Wall mountable
$19.50
14.5mm Stepless Hose Clamp - 1/2in. OD Tubing
Stainless Steel, Stepless Oetiker Clamp This style of clamp tightens in an exact circle, making them ideal for use with draft lines. 14.5mm for 1/2" OD Tubing. (12-14mm OD) Stepless Clamp Tool sold separately.
$0.60 - $11.00
Sankey Tap Bottom Seal - Skirt Wasker
Sankey coupler bottom seal also known as a skirt washer. Specifications: Type: Seal O.D.: 1-9/16" I.D.: 1-3/16"
$2.80
5/16'' Gas Hose Barbed Tee, Chrome Plated
Chrome plated Brass splicer tee has a 5/16″ bore. So use with 5/16 in. ID inlet and outlet hoses. Barbed Hose splicer Tee for gas in beer dispensing Brass with chrome plating. Tee fittings turn it to a 3-way system. Use with 5/16″ ID hoses.
$4.75
Ball Lock Body Connect Gas-In (New)
Replacement corny keg post where the gas-in ball lock coupler is fitted onto. Includes one o-ring and an universal poppet. 19/32" - 18 pitch thread Fits Cornelius Spartan, Super Champion, and Torpedo kegs. Use a 11/16" deep socket to install
$13.99
NukaTap Mini Beer Faucet Assembly Kit | Flow Control Ball Lock Quick Disconnect (QD) | Duotight Adapter | Self Closing Spring
Kit includes the NukaTap Mini, Flow Control Ball Lock QD, Duotight Adapter, and Self Closing Spring Mini Design – Ideal Flow Rate for Small SystemsMost conventional beer faucets are designed with 3/8" diameter spouts so you can pour a pint in just over 10 seconds. This type of flow rate is great for high turnover bars and commercial venues but isn't necessary or even desirable for all applications. For compact portable systems and home draft systems, a slower flow rate is easier to control and further reduces foaming issues due to the low liquid volume stored in the body of the faucet. The NukaTap Mini is also more ideal for pouring smaller doses. For example, cocktails where 5-8 oz of liquid is dispensed is difficult to control with a high flow rate tap. For portable systems, the NukaTap Mini with the Flow Control Ball Lock QD & Duotight Adapter assembly is small enough to literally put in your pocket, making it ideal for mini keg setups that you want to be portable or that you want to easily fit inside a domestic fridge where space is tight. Forward SealingForward sealing faucets are absolutely the way to go when it comes to beer taps. Old legacy taps still exist in the industry that are simply poorly designed. The issue with rear sealing faucets is that beer dries up on the internal piston. Aside from being unsanitary, as more and more beer dries up in these components the faucet can almost glue completely shut causing damaged seals or broken handles (this is particularly the case if it's left for some time to dry out with beer inside). These older legacy designs still exist probably due to poor education. The forward sealing designs do not have this problem and the tap drains out completely with no beer drying up on the mechanical moving parts in the same way. This makes the tap more sanitary and reduces maintenance. In many instances the price is similar so there is no reason to use a poorly designed rear sealing faucet. All NukaTap faucets are forward sealing. Laminar FlowJust like the NukaTap SS and NukaTap FC, the NukaTap Mini has been designed with laminar flow in mind. Laminar flow is critical for a beer tap as it means you will pour the beer with minimal foaming and a substantial reduction in wastage. Think about how many times a beer faucet opens and closes in its lifetime. 1,000 or maybe 10,000 times? Laminar flow saves wasted beer in excessive foam and the better laminar flow easily pays for itself in a reduction in lost beer. To use poorer designed faucets is essentially flushing money down the sink. Extensive modeling has been done on the NukaTap design to improve laminar flow. Integrated Seals That Are Indestructible and More SanitaryUnlike other designs, the NukaTap Mini body is made from Polyketone (POK) making it strong, robust, and able to be autoclaved. The seals are also over-molded from Santoprene® making them hard wearing so they will literally last for the lifetime of the tap without the need for replacement. Santoprene® and POK both have excellent resistance to chemicals such as caustic soda, peroxide, phosphoric acid, lactic acid, citric acid, acetic acid, and all common chemicals sold and used in the beverage industry. The seals internally are over-molded meaning no fissures or cracks exist for bacteria, crud, or yeast to hide. Superior First Pour Foam Due to Low Thermal Mass and ConductivityFirst pour foam is an issue caused by a warm tap body. For most faucets to pour well it's important to dispense enough beer to cool the tap body down to reach maximum performance. In addition to this the conductivity of the tab body also makes this worse so insulative materials simply work better than conductive materials. The NukaTap mini not only has very low thermal mass but is also highly insulative being made mostly from Santoprene® and POK. The combination of these two factors in conjunction with superior laminar flow makes for the lowest "first pour foam" effect out of any tap ever produced. Long Shank AlternativeMost conventional beer faucets require a large 3/4" hole to be drilled through the side of your refrigerator, keezer, or cold box wall. Traditional long shanks also generally have a large volume of liquid that sits inside the wall unrefrigerated which is not ideal. New long shank alternatives developed for the NukaTap Mini are designed to suit any wall thickness and greatly reduces the stagnant beer sitting in the shank itself. For walls up to 2.7" thick, these wall mount shank kits include three screws, however if the wall is thicker, you can also use 6 small wood screws or something similar and attach three screws from the front and 3 from the back allowing you to go into any wall type. Another advantage of this new design is the tap will never accidentally rotate. Typically, other long shank beer taps rely on the hex nut on the shank to be done up tight enough to prevent rotation but if the wall compresses (often the case with foam walls) the tap is allowed to rotate. This new design has three fixing points making it impossible for the tap to rotate accidentally as the interlocking teeth behind the collet allow you to set the angle and then do up the collet to fix the tap permanently in that position.
$44.00
O-Ring - Keg Post - Red
Replacement o-ring for Cornelius keg post.
$0.50 - $3.99
4" Keg Party Pump
D system keg pump has a chrome body and is perfect for home and party draft beer dispensing. "D" system is the most common system available in the US, also known as American Sankey. Features: Short stroke pump for quick pumping! Lever handle for easy keg tapping Forged brass body for durability Short handle is ideal for the smaller diameter 1/6 kegs. View Cleaning Features
$74.99
Tank Nipple Inlet O-ring
Replacement silicone o-ring for co2 tank nipple inlet.
$3.00
Ball Lock Body Connect - Beverage Out (New)
Replacement corny keg post where the liquid-out ball lock coupler is fitted onto. Includes one o-ring and an universal poppet. 19/32" - 18 pitch thread Fits Cornelius Spartan, Super Champion, and Torpedo kegs. Use a 11/16" deep socket to install
$13.99
Duotight 8 mm (5/16 in.) Tee
This Duotight tee fitting is compatible with EVABarrier 8 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$3.30
Flare Swivel Nut & Swivel Stem (3/16" OD)
Swivel nut and barb for connecting 1/8" ID tubing to a 1/4" flare fitting. Barb Specifications: Material: Stainless Steel Size: 3/16" OD Nut Specifications: Material: Brass Finish: Chrome Plated Brass Size: 1/4" Flare
$2.25
4" Chrome Plated Beer Shank Assembly
Chrome plated beer shank assembly Specifications: Chrome plated brass shank 4-1/8" length 1/4" bore plastic flange Does not include hose tailpiece Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
$26.99
4" Stainless Steel Beer Shank Assembly
This 4" long stainless steel shank assembly has a 1/4" bore and is commonly used when converting a refrigerator to a kegerator. The following is included in the assembly: 4" 304 stainless steel shank with 1/4" bore Locking ring Sleeve Coupling nut Lock nut Choice of either a black plastic flange or stainless steel flange
$34.99 - $39.99
Nukatap Stainless Steel Faucet - Stealth Bomber
The NUKATAP Stealth Bomber beer faucet features a forward sealing design. In normal rear-sealing faucets the entire faucet has to drain of beer. In forward-sealing faucets the faucet keeps beer in it so the inside doesn't have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavors transferring to your beer while you pour. Similar to the Intertap line of faucets, but with improved laminar flow and reduced first pour foam due to its lower thermal mass. The NUKATAP is compatible with all Intertap spout accessories. Made from stainless steel Shuttle made from TPV O-rings made from EPDM Matte black finish
$40.50
Beer Line Assembly, Ball Lock to Hex Nut
This ball lock to hex nut beer draft beer line assembly will connect a corny keg liquid post to a faucet shank. Includes: 5' of 3/16 ID clear vinyl draft tubing 1 x CMB liquid out corny keg connector, 1/4 mfl 1 x 1/4" swivel stem (stainless steel) with nut (chrome plated) 1 x 304 stainless steel tailpiece 1 x hex nut (chrome plated brass) 1 x hex nut washer 2 x 13.3 stepless oetiker clamp
$23.99
