Draft Supplies
Valve Shaft Seat
This washer seals the sliding shaft inside your faucet, helping to prevent drips.
$1.75
Faucet Friction Ball Washer, (White)
Faucet ball washer
$1.00
Manual Relief Valve
For A.E.B. & Cornelius ball lock tanks
$8.95
NukaTap Stainless Flow Control Faucet - G2
The NukaTap Flow Control beer faucet features a forward sealing design with the added benefit of having a lever to adjust beverage flow. In normal rear-sealing faucets the entire faucet has to drain of beer. In forward-sealing faucets the faucet keeps beer in it so the inside doesn't have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavors transferring to your beer while you pour. The Flow Control model is perfect for users that often switch between beer styles with different carbonation levels, or want to conveniently switch from pouring pints to filling growlers without having to make adjustments to the regulator pressure settings. Generation 2The NukaTap Flow Control G2 uses a completely new flow control mechanism with better sealing properties against the shank as well as improved flow control. Similar to the Intertap line of faucets, but with improved laminar flow and reduced first pour foam due to its lower thermal mass. The NukaTap is compatible with all Intertap accessories, except for the self-closing spring. The NukaTap FC uses a specially designed self-closing spring. Made from stainless steel Shuttle made from TPV O-rings made from EPDM
$61.00
Duotight BlowTie 2 Spunding Valve Assembly (CMB)
The BlowTie 2 Spunding Valve complete kit is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style spunding valve is much more accurate than the poppet style. The blow off pressure can be easily set using the BlowTie's integrated pressure gauge. The kit includes everything you'll need to use the spunding valve right out of the bag. Kit Includes: BlowTie 2 w/ Integrated Pressure Gauge (0-15 psi) Ball Lock Disconnect Duotight Flare Fitting 8 mm OD Rigid Plastic Joiner
$33.00
Chalkboard Tap Handle
These tap handles come with a removable, erasable chalkboard surface. Additionally, the back of the tap handle features a chalkboard surface that can be written on as well, which is handy and cool if your tap handle is seen from both sides. The insert is made of a thin sheet of metal and coated with chalkboard paint. The outer portion of the tap handle is made of wood and also painted with chalkboard paint. Includes removable metal chalkboard insert Back of tap handle also serves as chalkboard surface Dimensions: 7.25" H x 2.25" W x 0.75" D
$19.99
3/8" Vinyl Draft Line Tubing
3/8" ID clear vinyl beverage and gas tubing. Accuflex Bevlex 200 PVC Tubing is used for draft beer transfer and BIB soft drink applications. Its special dual durometer construction combines a low extraction inner contact surface with a flexible outer layer to provide excellent kink resistance and taste protection. NSF-51 Listed. Inside Diameter (ID): 3/8" Outside Diameter (OD): 5/8" Clamp Size: 18.5mm Prop 65 Warning: This product contains phthalates (DEHP, DBP, BBP), a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.
$1.80 - $110.00
Stainless Carbonation and Line Cleaning Cap
This stainless steel ball lock cap features soda bottle threads, allowing you to convert a soda bottle into a pressurized growler. It is compatible with both gas and liquid ball lock disconnects. Also works well for cleaning draft lines. Simply add line cleaning solution to a soda bottle, attach it to the draft line, and open the faucet to push solution through. This is a direct replacement to ball lock fittings included with the FermZilla pressure kit. It can also be attached to the FermZilla collection container, enabling you to purge the collection container of oxygen. 28mm PCO 1881 Threads
$15.50
16.5mm Stepless Hose Clamp - 5/8 in. OD Tubing
Stainless Steel, Stepless Oetiker Clamp This style of clamp tightens in an exact circle, making them ideal for use with draft lines. 16.5mm for 5/8" OD Tubing. (14-16mm OD) This will fit our 5/16" ID clear/red draft tubing that is commonly used for gas/co2 line. Stepless Clamp Tool sold separately.
$0.60 - $11.00
Slimline Torpedo Ball Lock Kegs
Torpedo Kegs too wide? Want to squeeze another keg in your kegerator? The patented design, of the new Slimline Torpedo Keg is 9% more slim than the classic model with all the same great features. Coming in at about 1/4" thinner than standard Ball Lock Cornelius Kegs, this keg has welded stainless handles and the ability to stack kegs with fittings still in place all at a great price. Cool FeaturesTorpedo Kegs were designed to stack with Ball Lock quick disconnects in place and serving which is a cool feature for some brewers who have vertical space in their refrigerator. We also like the rolled stainless steel handles. They are comfortable to grab and will never come off like some rubber handles can over time. “In” and “Out” is etched near the keg posts for easy identification which is very handy when you are connecting lines in a refrigerator or kegerator and trying not to make a mistake. Specifications: Max Pressure: 130 psi PRV Rating: 85 psi High Quality Laser Welded Seams ISO9001 Quality Assurance Made from 304 Stainless Steel
$110.00 - $152.00
Cornelius Keg Lid, New
A replacement lid for Cornelius (Corny) and Firestone kegs. Pressure relief valve included. Includes pressure relief valve and lid o-ring (not pictured).
$22.00
Pressure Gauge, 0-60 PSI
Replacement pressure gauge 0-60 PSI 1/4" NPT bottom inlet Right hand threads
$12.99
Duotight Compatible Faucet - Hand Held
Black plastic handheld faucet compatible with the duotight 6.5mm reducer. Also known as a cobra tap or picnic tap.
$6.60
Molded Probe Washer, D style
Molded probe seal washer for D style sankey couplers.
$2.50
Standard Beer Faucet - Chrome With Brass Lever
This economical faucet option has a polished chrome-plated brass finish that will add character to either your bar/restaurant or home bar. Fits standard North American shanks. Features Cost effective draft beer faucet Highly polished chrome-plated brass finish Body and lever made of chrome-plated brass, and easy to use with quick handle action Faucet fits U.S. specification knobs and shanks Made in the USA 🦅🇺🇸 Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
$25.00
KOMOS™ V2 Kegerator
Limited supply in-store available for pickup. Drop ships from vendor. The KOMOS V2 Kegerator improves upon the already striking feature set of the original best-selling model -- now made with upgraded refrigeration components for higher efficiency and faster cooling, and a redesigned interior that can hold up to FOUR 5-gallon Ball Lock corny kegs at one time. Assembly is quick and easy thanks to push-to-connect Duotight fittings and EVABarrier draft tubing. High-quality, stainless steel Intertap, forward sealing faucet(s) and stainless steel tower come standard. It also features a digital controller, stainless steel door, stainless steel floor, rolling casters, tower cooling fan, robust KOMOS regulator, and a list of options. What's New in V2? Larger Capacity - Fits up to four 5-gallon homebrew kegs Dual Gas Line Inlets - Feed two gas lines at different pressures, or one CO2 and one Nitro. 10% More Energy Efficient 15% Faster Cooling Times 40% Thicker Insulated Walls 25% Larger Condenser 30% Larger Evaporator This unit features an extended range digital controller that can adjust internal temperatures from 26 - 82°F. The higher end of this range is really convenient for homebrewers who often want to ferment at temperatures around 70°F. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. All kegerators come with Intertap faucets mounted on a stainless tower. These faucets are the newest, most advanced, forward sealing, beer faucets on the market today and will work perfectly for years. This model includes the all stainless steel version of the Intertap faucet. Komos kegerators come standard with Duotight fittings and EVABarrier draft tubing. Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing. Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free. The KOMOS kegerator boasts a list of other unique features for a kegerator in this price range, such as the tower fan, included KOMOS CO2 regulator, stainless floor, rolling casters, and countertop drip tray. Feature Summary: Stainless Steel Air Cooled Tower Stainless Steel Intertap Forward-Sealing Faucet(s) Duotight Fittings make connecting draft lines a breeze Digital Thermostat with wide 26 - 82° F temp range. Optimal ambient temperature is 65°F – 80°F (Please look at the Commercial Kegerator for use in garages or outdoors. It has an ambient temperature range of 32°F–104°F) Robust KOMOS Dual Gauge Regulator included CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless Steel Door Countertop Style Drip Tray Stainless Steel Floor for additional keg support Includes EVABarrier beer and gas tubing Beverage line measures 4mm ID x 8mm OD 1 x 1.7m length of line per tap Gas line measures 5mm ID x 8mm OD 1 x line of varying length depending on number of taps (2, 2.5, or 3m) 4 Tap model includes uncut rolls of beverage & gas line We recommend cutting beverage lines to 1.7-2m lengths (5.5-6.5 ft.) Gas lines can be cut to whatever length best suits your needs Duotight adapters for draft shank and regulator connections Duotight tee fittings for splitting gas lines (2, 3, 4 tap only) You will need to purchase additional keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny For ball lock and pin lock disconnects we recommend the Duotight 8mm x 1/4" flare fitting For commercial sanke keg couplers we recommend Duotight 8mm x Female Beer Thread fitting Detailed instructions on assembly and use Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall (fridge only) 35" with Caster wheels 48.75" with tower 51" with Casters and Tower 110 v - 60 hz 0.8 Amp draw Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 Refrigerator only option does not include tower, faucets, duotight connectors, and tubing.
$859.99 - $1,019.99
16.2mm Stepless Oetiker Clamp
16.2mm stepless Oetiker hose clamp. Fits: 5/16" ID x 9/16" OD vinyl draft hose
$0.60 - $11.00
Floating Dip Tube Filter Attachment
This really handy little filter can be used with the Torpedo Keg Buoy or the floating dip tubes included with the Kegmenter and FermZilla Pressure Kit to prevent hops or other solids from getting sucked into the dip tube itself. The 304 stainless 80 mesh is fine enough to filter out hops and many other solids but not so fine that it gets blocked up easily. If you have a FermZilla or stainless Kegmenter this add is a must. Made from HDPE and 304 Grade stainless steel, this product can be boiled or sanitized in the full range of cleaners that we sell. The plastic HDPE is over molded onto the stainless mesh to make a seamless finish. The end cap can easily pop off for cleaning.
$4.40
Beer Line Assembly, Hex Nut to Hand Held Faucet
This kit allows you to connect to and dispense from a sanke coupler. It includes 5' of 3/16" ID draft tubing, handheld faucet, 304 stainless steel barbed tailpiece, 13.3 stepless clamp, and a hex nut with washer. We recommend selecting the black draft tubing if dispensing outdoors.
$17.99
Beer Line Assembly, Hex Nut to Hex Nut
This hex nut to hex nut beer draft beer line assembly will connect a sanke coupler to a faucet shank. Includes: 5' of 3/16 ID clear vinyl draft tubing 2 x 304 stainless steel barbed tailpiece 2 x hex nut (chrome plated brass) 2 x hex nut washer 2 x 13.3 stepless oetiker clamp
$20.99
Intertap Tower Shank
This stainless steel Intertap Tower Shanks will fit in any 3" diameter draft tower. The 1/4" tailpiece is Duotight compatible and pairs perfectly with the Duotight 6.5 mm x 8 mm reducer, allowing you to quickly and easily connect 8mm OD EVABarrier draft line. Duotight fitting pictured is sold separately. Please note these shanks are not compatible with Perlick brand faucets. WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
$19.50
Torpedo Keg Stainless Steel Handheld Faucet
This handheld draft faucet from Torpedo Keg is made with stainless steel components. A high-quality option compared to standard plastic picnic faucets or cobra taps. 1/4 OD Barb Constructed of 304 Stainless Steel
$19.99
Ball Lock Coupler Cap Washer
Replacement washer for inside of ball lock coupler.
$0.50
Faucet Friction Washer
Facuet friction washer
$1.00
Tailpiece, Threaded, 1/4mfl
Stainless steel 1/4" mfl tailpiece.
$7.39 $4.99
Hose Tailpiece For 5/16'' Tubing
5/16" Hole, 3/8" Barb Shank TailpieceShank Tailpiece for 5/16" ID HoseNickel Plated
$2.00
6pk - O-ring for Universal Poppet
Universal poppet valve fits most kegs.
$3.99
4-Way Modular Gas Manifold
This modular gas manifold will allow you split one CO2 line to four of them. Each line can be turned off individually without affecting the flow to other kegs. Each ball valve contains a check valve that ensures no beer or gas can flow between the two kegs. The barbs are all 5/16" which is standard for gas line in the beer industry. If later, you decide to add an additional keg this manifold can be expanded using the Add On Assembly.
$54.00
Duotight Removal Tool and Tube Cutter
This 2-in-1 tubing cutter is hard to beat for clean, straight cuts. It is developed specifically for EVABarrier draft line, but is also compatible with any tubing that is 3/8" OD or smaller. Features a 8mm jaw on the back of the unit to easily pull the collet back when removing tubing from Duotight fillings.
$6.60
Duotight 8 mm (5/16 in.) Ball Valve
This Duotight ball valve can be used as an inline shut off valve on draft lines. Compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$3.90
16gm CO2 Cartridge
16gm Co2 Cartridge Not Threaded
$1.50
Standard Beer Faucet - Chrome Plated with Stainless Steel Lever
This economical faucet option has a polished chrome-plated brass finish that will add character to either your bar/restaurant or home bar. Fits standard North American shanks. Features Economical draft beer faucet Highly polished exterior surface for a brilliant finish Body, shaft and collar is constructed of chrome-plated brass Stainless steel lever is more durable than brass when used with tall, heavy handles Faucet fits U.S. specification knobs and shanks Made in the USA 🦅🇺🇸 Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
$28.99
1/2" Vinyl Draft Line Tubing
1/2" ID clear vinyl beverage and gas tubing. Accuflex Bevlex 200 PVC Tubing is used for draft beer transfer and BIB soft drink applications. Its special dual durometer construction combines a low extraction inner contact surface with a flexible outer layer to provide excellent kink resistance and taste protection. NSF-51 Listed. Inside Diameter (ID): 1/2" Outside Diameter (OD): 3/4" Prop 65 Warning: This product contains phthalates (DEHP, DBP, BBP), a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.
$2.25 - $129.00
Dual-Threaded Insert for Wooden Taphandles
Create your own tap handles with this insert. Simply drill a 1/2” hole in a piece of wood and thread the insert with a 3/8”, 16 thread per inch bolt with a nut attached; you can also use a coin. Once inserted, remove the bolt and attach your tap handle to your faucet.
$3.50
Ball Lock Jumper Post
Make your cleaning day a breeze with this QD Jumper post. No need to remove the Ball lock disconnects at all. The cleaner solution goes right through the Ball Lock Keg cleaning post. Connect multiple beer lines and Ball lock kegs in a daisy chain and clean them all in one go. Specifications: Made of Stainless steel material. Includes O rings on both ends. Jumper between the beer lines for easy cleaning. Ball lock kegs are widely used in home-brewing. Hence a handy tool for all home-brewers. Note: Pictured ball lock coupler not included.
$5.99
Flow Control Ball Lock Disconnect Beverage Out
This stainless steel flow control disconnect will eliminate the guess work of balancing draft lines. Use the adjustment knob to dial in the ideal flow resistance based on the beverage being served. Flow control disconnects perform better than flow control faucets as they put the point of resistance at the beginning of the beverage line instead of at the end. When beer passes through the flow control apparatus inside the faucet, turbulence will cause carbonation to come out of solution and foaming issues occur. Flow control disconnects on the other hand have the ability to restrict the flow before the beer enters the beer line so the head pressure created by the beer line keeps the carbonation in solution. 1/4" flare thread for beverage line connection. Please note: make sure your keg post o-rings are in good condition before using this fitting. If they are overly worn and you are not getting a good seal, replace the post o-ring then re-attach the ball lock fitting.
$38.50
