Best Selling Products

Replacement bonnet spring for beer keg regulators 0-60 psi.

Read more less

EVABarrier double wall tubing is an excellent choice for all draft dispensing applications. The inner barrier is an excellent gas barrier, keeping oxygen out and CO2 in. The inner wall is also extremely smooth to prevent bacteria and other microbes from attaching to the inside surface. The outer barrier gives the tubing a decent stiffness while still remaining pliable. This makes EVA Barrier remarkably kink resistant and the perfect choice for use with Duotight, John Guest, and other push-in fittings. The 3 mm (5/32") ID size is perfect for mobile draft applications or home draft systems where only a short beverage line is needed. Lengths of 3.2 ft. per line are all that you'll need for adequate flow resistance.' This tubing works seamlessly with Duotight Gas In and Bev Out Ball Lock QDs which allow you to connect your draft lines directly to your ball lock homebrew keg. Be sure to select the correct size QD fittings that correspond to your tubing's outer diameter (OD). Specifications: Inner Diameter - 3 mm (1/8") Outer Diameter - 6.35 mm (1/4") PVC, BPA, and Plasticizer Free* Stiff outer wall is kink resistant and easy to use with Duotight fittings Smooth inner wall prevents oxidation, CO2 loss and microbial growth build-up *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects.

Read more less

Specially designed lock to fit Perlick taps. Secure unauthorized beer handling with this beer faucet lock. The U hasp wraps closely around the faucet tap handle and beer inlet. This leaves no space to move the handle. So can’t open the faucet and hence no beer flows out either. Lock made of Chrome plated Brass and comes with two-set alike keys. Use with Perlick taps only. Chrome plated Brass lock with 2 alike keys set Locks the tap handle to the faucet body in close position. Cannot move and open the tap with the lock around. Eliminates underage access to your draft beer setup. Tamper proof and extremely easy to install and remove. Also fits stainless steel Intertap faucets

Read more less

Special Order please allow additional time for processing. Due to the weight and dimensions of the Grainfather G70, this item is shipped palletized freight from the vendor to prevent damage from occurring in transit.  Please allow additional time for processing. Please Note - this system comes standard with a NEMA 6-15P plug, and requires access to a 220v-240v power supply.   Two New Features on the G702: The G702 features a perforated grain basket and the sight glass is now integrated into the recirculation pipework. The new basket design provides an improved brewing experience with no top plate or additional pipework required, making for an even more efficient mash and an easier clean. 1. Perforated grain basket for an improved brewing experience with no top plate or additional pipework required.  2. Integrated sight glass is now a part of the recirculation pipework for easy volume reading. Product Description 70L of innovation, consistency and power have helped to create one of our most compelling systems to date. The inherent strength and safety capabilities of the G70² are matched by its bold, contemporary look and new smart brewing technologies. From the creators of the original award-winning all-grain brewing system, the Grainfather G70² represents the next level in brewing equipment. We’ve stepped up our game to bring you a smarter brewing system with a larger 70L capacity, improved design, wireless control, app integration and the same Grainfather signature quality guarantee. Whether you're a homebrewer looking to raise the stakes or a commercial brewery looking to bring authenticity back to your pilot batches, the G70² is your true brewing companion. It gives you everything you need in one compact package that can be used virtually anywhere. Features:  Two-stage false bottom. The conical base allows a false bottom with an inner collar to sit in the recess of the base. Early testers used 600gs of hops and saw full flow through the pump. This is very effective. Bespoke 3.2 kWh concealed conical heating element. Make the most of the power available. The element covers around 80% of the base and is mounted using a thermal paste rather than braised. This moves the heat efficiently upwards, minimizing the loss of heat to areas where it’s not needed. As it’s spread in a wide area, hot spots and scorching are very unlikely. Also, most solids settle on the false bottom, so they won’t touch the elements. As it’s concealed, it makes cleaning easy too. Integrated sight glass for easy volume readings during sparging. Instead of trying to judge the level of your preboil, you can easily sparge until you reach preboil volume. It’s also easy to clean after every brew. The sight glass cap can be replaced with the sight glass cleaning barb to easily recirculate a cleaning solution. Bottom drain below the false bottom means minimal dead space. High temperature, high flow rate, food-grade pump. With an 8L per minute flow rate, you can transfer your brew efficiently and safely. Heavy duty handles on the outside of the G70² unit. Convenient side entry recirculation. Rather than up and over, the G70² has a built in port on the side of the unit. If the pump is accidentally switched on, the wort will be safely directed back into the boiler. New rolled edge, mash plates and hop filter for increased strength and easy set up. There’s no more silicone seals, as the plates now have a smooth finish, making them more robust, hard-wearing and easy to install. Compared to the G30, the G70² is wider but not that much taller. Comparatively, the draining is still quick from the basket and there’s less likelihood of stuck sparges as the draining surface area is bigger. Safety aspects including locked in support ring, heavy duty, no slip brackets on the grain basket and protection from knocking the ball valve open. Automatic heat sensors and safety cut-out for dry boil protection. Color LCD controller screen with magnetic mounting for easy viewing from all angles and manual control. Glass lid with handle. Ball valve for sampling/draining. This runs in line with the pump so it’s particularly helpful when draining the cleaning water. The water runs out quickly, emptying the unit in no time. Huge Wort Chiller included. Despite the volume being more than double, cooling times remain around the same as the G30 thanks to a more powerful pump, efficient false bottom and bigger wort chiller to match the wider unit. The large size means it needs to be positioned away from the G70², however this is made easy with longer silicone tubing attached as standard. Lifting bar included with winch lifting hook. Use the bar for a two person lift or with a stable winch system for individual brewers to lift the grain basket. Large dual-stage hop filter provides a large surface area to allow for a hopping rate of up to 1.5kg, which also reduces pump load and blockages. Robust stainless steel body and excellent build quality. - SupportThe Grainfather is fully supported around the world by a fantastic support team who love brewing just as much as you do. Our support team is here for any technical enquiries on brewing or how the Grainfather works, as well as general customer service enquiries. All Grainfathers come with a 3 year warranty. Grainfathers purchased directly from the Grainfather website also come with a 30 day satisfaction guarantee. This means, if you are not fully satisfied with the Grainfather you are welcome to return it within 30 days for a full refund.  Instruction Sheet Tech Sheet  

Read more less

A replacement silicone seal for the perforated plates on the top and bottom of the Grainfather brewing system. Replaces the seal on the the Grainfather's perforated plates if yours gets damaged or goes missing. An authentic replacement part from the makers of the Grainfather

Read more less

Compatible with 35L BrewZillas and DigiBoils. Designed to be extremely sturdy when using heavier stills or off-center steam condenser units. Pairs perfectly with AlcoEngine Still Tops or the BrewZilla Steam Condenser Set. The PPSU sight glass allows you to watch your wort or wash boil and keep an eye on foaming issues. For brewing with the Steam Condenser Set, the sight glass is easily removed for adding hops or other boil additions. (Use gloves, it will be hot!) PPSU is an excellent choice for components that are exposed to high temperatures (up to 392°F / 200°C) and corrosive media due to its exceptional chemical resistance. As well as being extremely impact resistant. KegLand decided to use this type of plastic because it also has superior thermal and mechanical properties with the added benefit of being transparent. Intricate parts can be injection molded that would have been near impossible to do with stainless steel or lab-grade glass. Specs: 2" T.C. top ferrule port 3" T.C. sight glass ferrule Lid handles with molded grips Thicker silicone lid gasket for a tighter seal Includes: 3" PPSU sight glass disc 3" tri-clamp 3" silicone tri-clamp gasket Silicone lid gasket

Read more less

Control and power up to two fermenters at different temperatures and fermentation schedules with the GC2. By accurately controlling the temperature of your fermentation, you can produce consistent beers, every time. FEATURES Control and power up to two fermenters at different temperatures and fermenting schedules Use with the GCA Glycol Chiller Adapter to connect to the Grainfather S SERIES range of fermenters or most other fermenters Sleek and compact design with LED control display Compatible with the Grainfather App when connected to a Grainfather G SERIES fermenter or the GCA for managing your fermentation from anywhere via Wi-Fi Backed by a 3-year warranty Can be shipped without a pallet WHAT'S INCLUDED GC2 Glycol Chiller Glycol funnel Silicone tubing for priming pump *Propylene glycol and insulated connection hoses are sold separately Limited availability in store, may drop ship from vendor. Call for availability. 

Read more less

Celebrate simplicity with Heritage Estates. In just four weeks you can craft your own wine that is perfect for celebrating everyday moments. Pinot Grigio Style A typical dry Pinot Grigio style, this wine boasts aromas of tart green apple with crisp citrus and honey flavors. Food Pairings Pair with grilled seafood or Asian strirfry. Specifications Weeks: 4  Varietal: Pinot Grigio Sweetness: Dry Oak: Unoaked Body: Light ABV: 11.2% Kit Instruction Sheet

Read more less

Double Burette Holder. Double buret clamp securely holds up to two burets without obscuring graduation lines or numbers.

Read more less

A complete set of fittings to connect the Grainfather G40 & G70 Distilling Lid to the Still Spirits T500 Reflux Condenser for reflux distilling. The G40 or the G70 paired with the Distilling Lid and T500 Reflux Condenser Attachment Kit offers an all-in-one automated Brewing System that can also be used for reflux distillation, making it the ultimate combo to brew high-quality beer and distill neutral spirits. FEATURES • 304 Grade Stainless Steel Construction Note: Distilling Lid and T500 Reflux Condenser sold separately 

Read more less

Over time the internal diaphragm can wear out and result in drifting pressure or a slow leak through the regulator body. Replacing the diaphragm is usually the best path to the fixing these issues so your regulator can return to holding consistent pressures. Compatible with both the single and dual-body KOMOS regulators.  

Read more less

Stainless Lock Nut. 1/4 in. female BSP.

Read more less

This Duotight fitting is designed to go through the wall of a tank, housing, or wall, similar to a pass through shank, so you can run EVABarrier tubing from one side to the other. Compatible with EVABarrier 9.5 mm OD tubing. With the lock nuts in place, there is approximately 1" of pass through threading. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)  Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals.

Read more less

Did you drop your temperature controller for your TC-100 bundle?  Are you tired of the old Spike logo and colors and want the newest and greatest? Well do we have the controller for you! This thermometer will control to your submersible pump in your cold reservoir and your conical heater. Set your desired fermentation temperature and the controller does the rest! Specifications: Temperature Control Range: -50-210° F Temperature Accuracy: ± 1° F Input Power:  100-265V AC, 50/60Hz Output Power: 100-265V AC, MAX 10A

Read more less

200 pack of .5-1 micron filters for the Super Jet. 

Read more less

Rebuild a Micro Matic Premium Plus Series Regulator with this 7-piece service kit. Includes the disassembly torque tool. Included: (1) Tamper evident cap (1) Cartridge bolt (1) Lock ring (1) Diaphragm (1) O-Ring (1) Disassembly torque tool (1) Instructions

Read more less

#9 solid stopper made out of silicone. Used with 34l demijohns (9 gallon) and small wood barrels.

Read more less

A solid #8 silicone stopper. Used with larger mouthed glass carboys and small wood barrels.

Read more less

An oxygenation kit specifically designed for homebrewing. Oxygenate your wort easily and conveniently with a precise amount of oxygen rather than leaving it to chance.  The Spike Oxygenation (O2) Kit was designed to provide homebrewers with a simple solution for oxygenating their wort prior to fermentation; Happy yeast = happy beer! The days of slow or failed fermentations are over, and a giant 10lb oxygen tank is no longer the only solution! The O2 kit is designed to attach to a standard hardware store oxygen tank and will precisely oxygenate your wort to make sure fermentation goes smoothly! With that precise flow control, eacg oxygen bottle will oxygenate up to 200 gallons of wort; saving you time and money!

Read more less

Replacement gray cap plug for CMB ball lock disconnects.

Read more less

Made from high quality 304 Stainless Steel, this condenser lid is ideal for apartment or basement brewers who struggle managing steam and condensation during brewday. Easy to use and assemble, can be used with a wide range of configurations. Comes with removable end cap for adding hops, yeast nutrient or whirlfloc during the boil. (Use gloves, it will be hot!). This steam condenser set can be compatible with the 35L or 65L BrewZilla/DigiBoil with the stainless distillation lid and 2 Inch Bulkhead. This unit can allow brewing indoors without that pesky sticky steam gumming up your freshly painted interior! The End Cap can be removed for brewing salts/hops and other brewing essentials to be added during the boil. Please note hot steam through this port can lead to serious scalding, please use heatproof gloves. Not only will you get to the boil faster, but you will use less power overall to maintain a rolling boil as there will be less area for the heat to escape. No need to install inside a kitchen, or in the garage with a special range hood. Simply attach this to the Condenser Lid and run your kitchen tap or garden hose to the Duotight-compatible inlet. You don't not need super-fast flow rate to cool boiling steam into liquid. Different to distillation where you require the distillate to be under a certain temperature so that ethanol doesn't evaporate from the liquid at a high rate, with boiling wort you just need enough to form a liquid! Pretty simple. Eco-Friendly option if you have the means to save/collect the coolant water. Can be re-used on the garden or for cleaning later on. Please note the water discharging will be very hot! The Spray head can condense 0.42 gal (1.6 L) per minute while connected to 100 psi mains water. Caution: You will need to remove the Steam Condenser when you reach boil to manage the hot break and ensure you don't have a boil over when you reach boiling temperatures. Once you've completed that step, you can reattach the Condenser and leave it in place for the remainder of the boil. You Will Also Need: Distillation Lid for 35L or 65L BrewZilla / DigiBoil (Pro Sight Glass Distillation Lids coming soon) 2" T.C. Weldless Bulkhead 6.35 mm Monotight Adapter (or you can clamp directly to the inlet) Kit Includes: 5 x 2" Tri-Clamps 5 x 2" Tri-Clamp Silicone Seals 1 x 13.7" (340 mm) Long 2" T.C. Tee  1 x 7.8" (200 mm) Wide 2" T.C. Tee 1 x 2" T.C. End Cap 1 x 2" T.C. to 6.35 mm Monotight elbow cap with elongated spray head mister 1 x 2" T.C. x 0.47" (12 mm) Barb – Suitable for 3/8" (10 mm) ID Silicone tubing Some of these fittings are not sold separately

Read more less

This polypropylene base board comes with pre-drilled hole locations for mounting the MaltZilla motorized grain mill. Board Dimensions - 17.75" x 13.5" x 3/8"

Read more less

Replacement check valve for Micro Matic party pumps.  For Micro Matic HP-100, 300, 500, 700 & 900 series pumps.

Read more less

Carbon filterting neutral spirits is done to remove the fusel oils that give spirits a harsh taste and smell. This kit has been designed to be used with small amounts of neutral spirit up to 1L at a time. Kit Includes: 1 - 2" T.C. Extension Tube 2 - 2" Tri-Clamps 1 - 2" Silicone Gasket 1 - 2" Teflon Gasket w/ Mesh Screen 2 - 2" T.C. x 3/4" Female BSP 2 - 3/4" x 1/2" BSP Reducing Bush 2 - 9.5 mm Duotight x 1/2" Ball Valve 1 - Roll of Plumber's Tape 1 - 500g Pouch of Food Grade Activated Carbon  

Read more less

Standard stainless steel spout replacement for Intertap and Nukatap faucets.

Read more less

Weyermann® Dark Wheat is a gently kilned malt made from high-quality German wheat. It contributes a mild golden color to wort and a robust malty-sweet flavor with notes of bread, biscuit, honey, toffee, and caramel. Wheat malts are high in protein, which helps produce fuller-bodied beers. Wheat malt can also improve head formation and retention, depending upon the other grist constituents. In top-fermented beers, Weyermann® Dark Wheat malt performs especially well, adding creaminess, body, and complex wheat flavors. Weyermann® Dark Wheat malt has a somewhat 'drier', more complex character than pale wheat malts. It's the signature malt for Bavarian Dunkelweizen, and perfect for Weizenbocks, Kölsch, and Altbiers. Specifications: Malt Type:  Specialty Grain Origin:  Germany Color:  6.2-8.1 °Lovibond (15-20 EBC) Protein: 10.5-14% Moisture:  5% max. Extract (dry):  81% min. Usage:  50% max. 55 pound bags are excluded from flat rate / free shipping offers. Also available by the pound.

Read more less

Briess 2-Row Caramel 120L is a very dark crystal malt made with 2-row barley. It imparts deep red color and pronounced flavors of burnt-sugar, raisin, and prunes. Crystal malts also add body and improve head retention. Usage is progressive, starting light to add deep richness to pilsners and reaching the maxiumum 15% to impart color and raisiny flavor to darker ales, stouts, and porters. Crystal malts are gently cooked during the malting process. Cooking initiates the enzymatic conversion of starches into fermentable sugars, and caramelizes some of the sugars as the malt reaches its final color. This eliminates the need to mash crystal malt, and ensures that some of the sugars will survive fermentation to sweeten the beer. Briess caramel malts are roaster produced to create glassy, crystallized sugars with rich flavor and color. Specifications: Color °L : 120 Moisture % Max : 3 Extract FG Dry : 75 Usage Rate : Up to 15% 50 pound bags are excluded from flat rate / free shipping offers. Also available by the pound.

Read more less

Caramel Steam malt is created via an innovative process that develops crystal characteristics and a rich, nutty flavor. Caramel Steam can be used as a direct substitution to crystal malts for those desiring crystal-like flavors, but wanting a softer sensory impact. Specifications: Color °L : 35 - 45 Moisture % : 5 Protein Total % : 12 Max Usage Rate % : 20 55 pound bags of grain are excluded from flat rate / free shipping offers. Also available by the pound.

Read more less

Dingemans Munich malt has a pronounced malty flavor, aroma, and an orange - amber color. It improves the character and full body of a beer. Suggested usage: Amber beers, Ales, Stout, Bock beers, Lagers Specifications: Lovibond: 5.6-6.7 Usage: to 80% Moisture: up to 4.5% Extract% (dry basis): 79.5 Protein Total: 12.0% max Origin: Belgium Maltster: Dingemans 55 pound bags of grain are excluded from flat rate / free shipping offers. Also available by the pound.

Read more less