Best Selling Products
3/8" Stainless Half Coupler
Stainless steel 3/8" female pipe thread (FPT) half coupler. Note: Half couplers have thread for insertion from one side only.
$4.99
Pressure Gauge
This pressure gauge can be used while pressure fermenting, briting or pressure transferring. Specifications: 0-30psi 2" Dial 1/4"npt **This accessory is to only be used with the FLEX+ or the upgraded high pressure lid**
$15.00
FLEX Leg Extension Set
Leg extensions are a great option to get th FLEX off the ground. This reduces bending over to take gravity readings, add hops, transfer, etc. The shorty leg extensions are 9” long and the long leg extensions are 18". Both screw directly into the bottom of the FLEX legs. Both sets of leg extensions can be used with the stock leg caps, leveling feet and casters. *It is recommend to use the extended bracing shelf when using the leg extensions for added stability* Shortly leg extension specifications: 304SS 9" long Top threads for attaching to conical legs Bottom threads for attaching leveling feet and casters Long leg extension specifications: 304SS 18" long Top threads for attaching to conical legs Bottom threads for attaching leveling feet and casters
$42.00 - $55.00
Conical Replacement Lid Gasket
The Spike Brewing conical lid gasket is a one piece design made from FDA approved Silicone. This design allows for an easy install and easy clean up. Simply push the gasket into the gasket groove on the lid. Specifications: Black in color FDA approved Silicone
$13.00 - $40.00
Spike+ Pickup Tube - Center
The Spike+ center pickup is specially designed to work with the Spike+ line of kettles. The dual 1.5" TC flange allows the pickup tube to attach to the kettle and have a valve or other 1.5" TC accessory attached to the outside. Spike Brewing uses 5/8" tubing which flows up to 4x better than their competitors 1/2" size. Features: Oversized 5/8" diameter 304 stainless tube Sized to pick up from the center of the kettle Made in the USA **A 1.5" gasket and clamp will need to be purchased separately if you do not already have spares**
$40.00 - $45.00
Pickup Tube - Center
Spike Brewing's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with their full port valves which have a 5/8" flow diameter; no flow restriction. Spike Brewing's proprietary fittings uses quick connect technology. The quick connect fitting simply hand screws into the kettle and the pickup tube easily pushes in/pulls out; no tools needed. Features: One size fits all kettles Large 5/8" diameter 304 stainless tube Simply push in for seal; no tools required Proprietary stainless push to connect fitting included Sized to pick up from the bottom edge of the kettle Made in the USA
$33.00 - $45.00
CF30 Spike Conical Unitank
CF30 SPIKE CONICAL UNITANK Spike Brewing has completely re-designed their stainless conical line from the ground up. It took a year in the making and are confident that these are the best conical fermenters on the market! Along with the new TC100 Temp Control System, you'll have everything you need to Elevate Your Brew Day! CF30 Features: 304 stainless steel; 1.5mm (16ga) All sanitary welded ports (no-weldless fittings) All hardware shown here is included! Designed for 1/2 bbl to 1 bbl batches 40 gallon total capacity 15 psi working pressure (always use a 15 psi pressure relief valve) Use for pressure transfers Use as a brite tank Etched volume markings 24" wide by 46¨ tall Fully polished finish Lid Features: 4" TC modular top port Allows for hop additions, temp control coil, top sight glass, etc Three 1.5" TC ports which allow for: Blow Off Port – Dedicated port for an airlock or blow off tube Hop Port – Dedicated port for adding hops PRV Port – Dedicated port for your pressure relief valve (PRV) Stainless band clamp for attaching the lid Completely removable lid for easy cleaning Body Features: Huge 2" TC bottom dump with butterfly valves (no more stuck yeast dumps) 1.5" TC racking port with butterfly valve 1.5" TC sample valve (for taking gravity readings) 1.5" TC thermowell with 3" dial thermometer Bracing shelf is included with the CF30 Limited availability in store. Drop ships from vendor.
$1,897.50
Plate Filter
Pass your product using 5 PSI through this plate filter to remove particulate from your beer or wine. Each filtering session requires two filter pads of the same micron to work properly.
$54.99
3'' Chrome Plated Cooler Wall Shank
3" chrome plated special cooler wall shank with 1/4" x 3/8" bore. Specifications: Finish: Chrome PlatedBody: Material BrassLength: 3-1/8"Bore ID: 1/4" x 3/8"
$17.99
Faucet Shank Locking Ring
Faucet shank locking ring
$0.50
1" ID Clear Vinyl Tubing
Clear, flexible, and food-safe, this polyvinyl chloride (PVC) tubing is perfect for handling beverages and liquids. 1" ID clear vinyl tubing is ideal to be used in the creation of a blowoff tube for glass carboys. Material: PVC (polyvinyl chloride) ID: 1.000 (1") OD: 1.250 (1-1/4) Wall: .25 (1/4) Max. Pressure: 25 psi (at 70°F. Higher temperatures lower maximum working pressures.) Max Temperature: 150°F Prop 65 Warning: This product contains phthalates (DEHP, DBP, BBP), a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.
$2.60 - $99.99
MKII Temperature Controller
Dial in your fermentation temperatures with the MKII Temperature Controller. Features: - High accuracy 0.1 degree C/F. - Two 10amp sockets, one for heating and one for cooling - Temperatur range is -45C/-49F up to 120C/248F - Comes with waterproof probe - Uses “50k ohm” probe
$74.99
Super Agata Bench Capper
This capper has a self adjusting spring mounted mechanism that works on a variety of beer bottles, making bottling a breeze.
$42.99
