Best Selling Products

2599 products


  • KOMOS® XL Slimline Cold Plate - 2 Lines KOMOS® XL Slimline Cold Plate - 2 Lines

    KOMOS® XL Slimline Cold Plate - 2 Lines

    1 in stock

    The KOMOS Slimline Cold Plate is made from rugged aluminum casting with a large thermal mass for excellent heat absorption. High conductivity aluminum alloy aids the heat transfer as your beverage travels through the internal 18 ft. long stainless steel lines. Inlets and outlets come with standard 1/4" male flare thread so you can easily attach swivel nuts and barbs or Duotight push-to-connect fittings. Aluminum cast 18 ft. internal lines made from 304 stainless steel 1/4" male flare connections 15" L x 10" W x 1" Thick (2.75" tall at inlet/outlet) Pre-drilled mounting holes Recommended serving pressure - 20-30 psi

    1 in stock

    $150.00

  • Check Valve, Perlick Coupler

    Check Valve, Perlick Coupler

    9 in stock

    Check valve for Perlick couplers.

    9 in stock

    $3.25

  • 857c41bc36ba2d1be4e16d321e3f15b7%2Fmangrove-jacks-wine-yeast-bv7-8g.jpg Mangrove Jack's Wine Yeast - BV7

    Mangrove Jack's Wine Yeast - BV7

    10 in stock

    A white wine strain which enhances volume and intensity for full varietal flavour expression. This moderate fermenting yeast also promotes good body and structure, whilst still preserving and respecting the natural flavour and aroma characteristics of the grape. Suitable for Chardonnay, Semillon, Muscat, Pinot Gris and more. Alcohol Tolerance: 14% Usage Directions: No rehydration required - add directly to grape must and stir well. For best results, ferment at 14 - 28°C (57 - 82°F). Storage Recommendations: Store in a cool dry place. 8g Sachet

    10 in stock

    $2.50

  • Beer Faucet Tap Ferrule - Silver

    Beer Faucet Tap Ferrule - Silver

    4 in stock

    Use with a hanger bolt to attach to a wooden tap handle. This ferrule has 5/16” top threads and 3/8” bottom threads.  

    4 in stock

    $4.00

  • 4347 Extreme Fermentation 4347 Extreme Fermentation

    4347 Extreme Fermentation

    Out of stock

    A very good choice for alcohol tolerance and stuck fermentations. Produces a very clean, dry profile, low ester formation and other volatile aromatics. Flocculation: LowAttenuation: NATemperature Range: 65-80°F, 18-27°CAlcohol Tolerance: 21% ABV Styles: Brandy, Cognac, Armagnac, Eau de Vie, Grappa/Marc/Bagaceira, Rum, Scotch, Vodka

    Out of stock

    $13.99

  • 4" Clear TC Cap 4" Clear TC Cap

    4" Clear TC Cap

    2 in stock

    Probably the coolest add-on for the Spike Brewing conical line! There heard many brewers who have switched from clear carboys to stainless and they only have one complaint; I can't see my beer fermenting any more! Brewers are curious by nature and we're not ones to stop that curiosity so here is our solution to that problem.Their engineers designed a clear polycarbonate (same material as bullet proof glass) cap which allows you to see inside the top of the conical when it's fermenting. This has also been tested against common brewery chemicals and has held up against the likes of PBW and StarSan. Specifications: 4" TC Clear polycarbonate material

    2 in stock

    $33.00

  • 2001 Urquell Lager - PC 2001 Urquell Lager - PC

    2001 Urquell Lager - PC

    Out of stock

    With a mild fruit and floral aroma this strain has a very dry and clean palate with a full mouthfeel and nice subtle malt character. It has a very clean and neutral finish. Flocculation: Medium-HighAttenuation: 72-76%Temperature Range: 48-56F, 9-13CAlcohol Tolerance: 9% ABV Styles: Bohemian Pilsner We ship all liquid yeast with an ice pack and insulated bubble envelope. Beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.

    Out of stock

    $13.99

  • 2'' Maximizer for Kettle

    2'' Maximizer for Kettle

    2 in stock

    2" maximizer allows you to transfer more liquid from your brew kettle. The maximizer will thread into a 1/2" FPT fitting inside your kettle.

    2 in stock

    $11.95

  • 12'' x 6.5'' Plastic Drip Tray w/o Drain 12'' x 6.5'' Plastic Drip Tray w/o Drain

    12'' x 6.5'' Plastic Drip Tray w/o Drain

    8 in stock

    This 12" x 6.5" drip tray is made from food grade polycarbonate material.  Does not contain a drain.

    8 in stock

    $12.99

  • 1/2'' Barbed Tee, Stainless Steel

    1/2'' Barbed Tee, Stainless Steel

    23 in stock

    1/2” barbed tee, stainless steel.

    23 in stock

    $6.50

  • 1/2'' x 26'' Siphon Assembly

    1/2'' x 26'' Siphon Assembly

    10 in stock

    This siphon assembly includes a 1/2" x 26" racking cane with anti-sediment tip, 5' of 7/16" ID clear vinyl tubing, and a large plastic clamp to stop the flow if necessary.

    10 in stock

    $11.99

  • 1/2'' x 1'' SS Nipple, Threaded Close

    1/2'' x 1'' SS Nipple, Threaded Close

    12 in stock

    Stainless steel 1/2" x 1" close nipple.  Used for connecting a 1/2" ball valve to a union.

    12 in stock

    $5.00

  • 1.5'' Tri-Clamp x 3/4'' Female BSPP, Stainless Steel

    1.5'' Tri-Clamp x 3/4'' Female BSPP, Stainless Steel

    1 in stock

    A 1.5" Tri-Clamp to 3/4" Male Pipe Thread.304 Stainless Steel

    1 in stock

    $29.00

  • 1.5'' Tri-Clamp x 1'' FPT, Stainless Steel

    1.5'' Tri-Clamp x 1'' FPT, Stainless Steel

    Out of stock

    Connect a 1" female pipe thread fitting (FPT) to a 1.5" Tri-Clamp (TC) fitting with this stainless steel piece of hardware.

    Out of stock

    $22.00

  • 3/8" Full Port Stainless Ball Valve

    3/8" Full Port Stainless Ball Valve

    2 in stock

    304 stainless steel full port ball valve with 3/8" female pipe thread (FPT) on both ends.   Note: Handle may be blue instead of the pictured yellow.

    2 in stock

    $16.50

  • BlowTie 2 Diaphragm Spunding Valve with Gauge BlowTie 2 Diaphragm Spunding Valve with Gauge

    BlowTie 2 Diaphragm Spunding Valve with Gauge

    11 in stock

    The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style of spunding valve is much more accurate than the poppet style. The 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing. The BlowTie 2 features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The gauge is removable and can be swapped out with a gauge of a different pressure range. Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-15 psi WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge.

    11 in stock

    $22.00

  • Miso, Tempeh, Natto & Other Tasty Ferments

    Miso, Tempeh, Natto & Other Tasty Ferments

    Out of stock

    Miso, Tempeh, Natto & Other Tasty Ferments A step-by-step guide to fermenting grains and beans.  Written by Kirsten K. Shockey and Christopher Shocky with a foreword by David Zilber. Best-selling fermentation authors Kirsten and Christopher Shockey explore a whole new realm of probiotic superfoods with Miso, Tempeh, Natto & Other Tasty Ferments. This in-depth handbook offers accessible, step-by-step techniques for fermenting beans and grains in the home kitchen. The Shockeys expand beyond the basic components of traditionally Asian protein-rich ferments to include not only soybeans and wheat, but also chickpeas, black-eyed peas, lentils, barley, sorghum, millet, quinoa, and oats. Their ferments feature creative combinations such as ancient grains tempeh, hazelnut–cocoa nib tempeh, millet koji, sea island red pea miso, and heirloom cranberry bean miso. Once the ferments are mastered, there are more than 50 additional recipes for using them in condiments, dishes, and desserts including natto polenta, Thai marinated tempeh, and chocolate miso babka. For enthusiasts enthralled by the flavor possibilities and the health benefits of fermenting, this book opens up a new world of possibilities. 2020 IACP Cookbook Award Finalist, 2019 Foreword INDIES Winner 408 pages  

    Out of stock

    $29.95

  • Sale -26% Triple Event Digital Timer

    Triple Event Digital Timer

    2 in stock

    The Escali Triple Event Digital Timer will help you efficiently multi-task with three independent timers.  Each timer is visible from the easy to read display at once so you always their status.  Recall previous timer settings for repetitive tasks and keep track of time with Clock Mode. The include stopwatch function features increments of 0.01 seconds.Time 3 Events at OnceSet three independent timers and view their progress all at once on the easy to read display.Overtime CounterThe timer counts up after an alarm has expired until you press the ‘Start/Stop’ button.Timer & Stopwatch FunctionsCount up or down to a maximum of 19 hours : 59 minutes : 59 seconds.Recall Last Timer SettingRecall the last timer setting automatically at the touch of a button when performing repetitive tasks.Clock ModeWhen the timer is not in use, time is displayed in either 12 hour or 24 hour formats.Magnetic Back & KickstandUse the magnetic back to hang the display on a nearby refrigerator, or place it on a countertop using the built-in kickstand. Specifications Timer Range:  19 hr : 59 min : 59 sec Increments:  Counting down: 1 sec, Counting up: 0.01 sec Dimensions:  3.75 x 2.75 x 0.5 in Battery:  Two LR44 (included)  

    2 in stock

    $18.99 $13.99

  • Peacemaker Pale Ale - All Grain Recipe

    Peacemaker Pale Ale - All Grain Recipe

    Out of stock

    All Grain Recipe Peacemaker Pale Ale This pale ale features a blend of the wild American hop Comet and citrus / floral focused Cascade hops.  Along with a balanced malt backbone, this pale ale is one to be enjoyed. Estimated Beer Stats: Original Gravity: 1.054 ABV: 5.5% Color (SRM): 9 Bitterness (IBU): 32 Ingredient / Instruction Sheet *YEAST SOLD SEPARATELY*  Recommended yeasts are: Wyeast 1056 American Ale, Imperial A07 Flagship, Safale US-05, Lallemand Bry-97 or Mangrove Jack's M44 West Coast Yeast Makes 5 Gallons

    Out of stock

    $27.99

  • Adjustable Stainless Gas Pressure Relief - Non-threaded

    Adjustable Stainless Gas Pressure Relief - Non-threaded

    2 in stock

    A useful component for a spunding valve, this stainless steel pressure relief valve is adjustable from 0 to 30 psi. Note: This pressure relief is Non-threaded. It is intended for welding in place only.

    2 in stock

    $14.99

  • 15 psi Pressure Relief Valve

    15 psi Pressure Relief Valve

    1 in stock

    When pressurizing your Spike Conical you'll always want to use a pressure relief valve (PRV). This will prevent the tank from being over pressurized and causing a potential failure to occur. This Spike Brewing PRV was developed with their OEM specifically to work with their CF series Conical. It will keep your tank below the 15psi max working pressure rating. The PRV also has a handy bleeder pull ring to release built up pressure. Specifications: 15 psi release 1/4" npt threads Spike Brewing's specially designed gas manifold is also now available.  

    1 in stock

    $25.00

  • Conical Extended Bracing Shelf Conical Extended Bracing Shelf

    Conical Extended Bracing Shelf

    2 in stock

    Spike Brewing's new custom Spike extended bracing shelf was a solution created based on customer feedback on their normal bracing shelf. The extended bracing shelf now widens the footprint of the conical making it more stable. It is a recommended addition when going vertical with the leg extensions or mobile with casters.  Features: 304SS Super thick 14ga material Made in the USA Welded support bars Includes 3 bolts to affix the conical to the bracing shelf Bracing shelf install and instructions:Install + instructions Additional accessories to add on: -Caster Wheels -Standard or Shorty Leg Extensions

    2 in stock

    $70.00 - $90.00

  • CIP Ball CIP Ball

    CIP Ball

    Out of stock

    Another cool innovation from the Spike Brewing engineers; their low pressure CIP ball! They wanted to design a CIP ball that didn’t require home brewers to purchase another pump if they already owned one. Small brewery pumps, like Chugger and March pumps used on our Spike System, are very common for most home brewers. However, most CIP balls require a much larger pump to work properly. This CIP ball was specifically designed to work with the more common 7GPM pumps. It has also been tested with larger sump pumps which are also commonly used for CIP applications. Spike Brewing also designed the CIP ball to fit through a 1.5" TC port. This allows for quick install of the CIP ball after fermentation. This works especially well with cleaning the temp control coil. They recommend a 5-10min CIP with 160F brewery wash to give a nice and shiny FLEX or conical fermenter. Pro Tip:If you do not have a FLEX+ lid with 1.5" TC port you can attach the CIP ball to the secondary port of your FLEX after an initial dump and rinse. Then simply CIP as described above! Specifications: 1.5" TC x 1.5" TC 304SS Low flow design

    Out of stock

    $70.00

  • 857c41bc36ba2d1be4e16d321e3f15b7%2FFront_CF10_Spike_Conical_Fermenter.jpg 857c41bc36ba2d1be4e16d321e3f15b7%2FCF10_Spike_Conical_Fermenter.jpg

    CF10 Spike Conical Unitank

    Out of stock

    CF10 SPIKE CONICAL UNITANK Spike Brewing has completely re-designed their stainless conical line from the ground up. It took a year in the making and are confident that these are the best conical fermenters on the market! Along with the new TC100 Temp Control System, you'll have everything you need to Elevate Your Brew Day! CF10 Features: 304 stainless steel; 1.2mm (18ga) All sanitary welded ports (no-weldless fittings) All hardware shown here is included! Designed for 5 to 10 gallon batches 14 gallon total capacity 15 psi working pressure (always use a 15 psi pressure relief valve) Use for pressure transfers Use as a brite tank Etched volume markings 17" wide by 35¨ tall Fully polished finish Lid Features: 4" TC modular top port Allows for hop additions, temp control coil, top sight glass, etc Three 1.5" TC ports which allow for:  Blow Off Port – Dedicated port for an airlock or blow off tube Hop Port – Dedicated port for adding hops PRV Port – Dedicated port for your pressure relief valve (PRV) Stainless band clamp for attaching the lid Completely removable lid for easy cleaning Body Features: Huge 2" TC bottom dump with butterfly valves (no more stuck yeast dumps) 1.5" TC racking port with butterfly valve 1.5" TC sample valve (for taking gravity readings) 1.5" TC thermowell with 3" dial thermometer  Limited availability in store.  Drop ships from vendor.

    Out of stock

    $852.50

  • Sale -25% Progress (UK) Pellet Hops

    Progress (UK) Pellet Hops

    1 in stock

    Hop Type: Dual-PurposeOrigin: EnglandAlpha Acid: 5.0 - 8.0%Similar Varieties: Fuggle, East Kent GoldingCommon Styles: Bitters, Pale Ale, India Pale Ales, Mild, Brown Ales, and Scottish Ales Progress was one of the first varieties to come out of a modern breeding program in England. Its lineage includes Whitbread Goldings and O.B.79, making it cousin to Target. Developed to create a very English Fuggle-like impression in the glass. Moderate to strong suggestions of spring grass, herbs, and fresh flowers overlaid on woods and dried mint. Adds nice floral and grass/herbal complement when blended with fruitier varieties (think EKG or Sovereign) for late and dry hopping. Very fine as a late kettle, hop back, or cask addition in the hoppy English trifecta: bitter, pale ale, IPA. Progress has a high enough alpha content to also perform light bittering duty in mild, brown, and Scottish ales. Adds a nice element to brown porters. Like Fuggle, does well as a single hop or component of a blend.

    1 in stock

    $2.25 - $15.55

  • 5/16'' ID PVC Free Draft Tubing

    5/16'' ID PVC Free Draft Tubing

    75 in stock

    Ultra Barrier™ Gas tubing from EJ Beverage is constructed of a unique compound that provides for an excellent alternative to PVC.  Advantages to this unique tubing are: Clear tubing with red stripe for identification as low pressure gas line PVC Free and BPA Free - containes no DEHP phthalates or other plasticizers Environmentally friendly production - does not emit dioxins Extremely low extractables/leachables High flexibility Remains flexible at lower temperatures Ultra-low permeability Superior Barrier properties Temperature range of -40 to 125° F Working pressure of 51 psi

    75 in stock

    $1.60 - $124.99

  • 1/4'' Swivel Nut and Stem - Both Stainless Steel

    1/4'' Swivel Nut and Stem - Both Stainless Steel

    16 in stock

    Stainless steel 1/4" swivel nut and 1/4" barb commonly with 3/16" ID draft tubing and corny keg couplers.  If connecting this to another metal connection, it is recommended to use a nylon flare washer to complete the seal.

    16 in stock

    $4.00

  • 6" Stainless Steel Beer Shank Assembly 6" Stainless Steel Beer Shank Assembly

    6" Stainless Steel Beer Shank Assembly

    1 in stock

    This 6" long stainless steel shank assembly has a 1/4" bore. The following is included in the assembly: 6" 304 stainless steel shank with 1/4" bore Locking ring Sleeve Coupling nut Lock nut Choice of either a black plastic flange or stainless steel flange

    1 in stock

    $39.99 - $43.99

  • Regulator Inlet Flare Fitting, LH

    Regulator Inlet Flare Fitting, LH

    21 in stock

    Regulator inlet flare fitting for primary regulators. 1/4" NPT (left hand) x 1/4" flare Does not include check valve

    21 in stock

    $2.75

  • Fermentap Thermometer (3in. Face x 6in. Probe)

    Fermentap Thermometer (3in. Face x 6in. Probe)

    2 in stock

    This thermometer features a 3" face, 1/2" MPT, and a 6" probe. This thermometer is great for a mash tun but may not be suitable for kettles if you're using an immersion chiller due to it's longer probe.

    2 in stock

    $22.99

  • Weldless Stainless Thermometer 2 in.

    Weldless Stainless Thermometer 2 in.

    2 in stock

    This stainless thermometer features a 3" face, a 2" probe, and a high temperature food grade silicone gasket. The shorter probe works well with immersion chillers and heat exchangers.

    2 in stock

    $35.00

  • Sale -36% Filter Housing - 10 in

    Filter Housing - 10 in

    1 in stock

    10" filter housing with 1/2" FPT for the "in" and "out" fittings. (fittings sold seperately).

    1 in stock

    $55.00 $34.99

  • Camlock Type A Camlock Type A

    Camlock Type A

    9 in stock

    Type A camlock disconnect fitting. Male camlock with 1/2" Female Pipe Thread (FPT). 304 Stainless steel construction. 150 psi working pressure.

    9 in stock

    $9.90

  • Sacred & Herbal Healing Beers - Buhner

    Sacred & Herbal Healing Beers - Buhner

    Out of stock

    This is the first comprehensive book ever written on the sacred aspects of indigenous, historical psychotropic and herbal healing beers of the world.

    Out of stock

    $19.95

  • Gnome Root Beer Soda Extract

    Gnome Root Beer Soda Extract

    6 in stock

    Gnome is a mellow Root Beer with a big, round flavor. Totally subdued when compared with Zatarains. It has a lot of followers including us. The recipe included on the back of the 4 oz packs is for a 2.5 gallon batch using 1 to 2 oz per batch.4 oz package makes 5 to 10 gallons of rootbeer.

    6 in stock

    $15.99

  • AG Rhine Hock Wine Bottles - Case of 12

    AG Rhine Hock Wine Bottles - Case of 12

    Out of stock

    Rhine (Stretch Hock) Wine Bottle, No Punt - 750 ml, Antique Green (Case of 12)

    Out of stock

    $20.00

Footer image

© 2026 Home Fermenter®, Powered by Shopify

    • American Express
    • Apple Pay
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account