Testing & Measuring

Storage solution is used to keep your pH meter probe from drying out when not in use.  Make sure to always fill the cap with storage solution before storing your pH meter. Electrolyte Solution KCI 3mol/Litre  

Read more less

If you're new to brewing you'll soon learn that healthy yeast makes better beer. The best place to start with making healthy yeast is to build up their numbers. This compact stir plate works with Erlenmeyer flasks up to 5000mL in size. Depending on the volume of your yeast starter, you can use the adjustment knob to dial in the speed of the stir bar. It is recommended using just enough power to keep yeast in suspension, a full vortex isn't really necessary. Note: Pictured flask not included.

Read more less

Used to calibrate a pH meter that requires pH 7.01 solution. 20 ml single use sachets.

Read more less

Used to fill pipettes with liquids that should not be mouth pipetted.

Read more less

A great scale at a great price.  This can weigh a full sack, and then a bit more!  These are a great option for scaling out grain at home! Features: Massive 55 lb (25 kg) capacity! 30 year warranty Backlight Feature for LED Screen Runs on 4 x C batteries or AC adaptor (included) Large Weigh Platform 8" x 6.5" Weighs in Pounds, Pounds:Ounces, Kilograms, Grams, Ounces Dual Range Weigh Design: 0-2 lbs x 0.1oz, 0-1kg x 2g 2-55 lbs x 0.5oz, 1kg-25kg x 10g Display is removable and attached to two foot cord for easy viewing of the display while using larger weighing vessels

Read more less

The 2" stir bar is a great choice for large flasks.

Read more less

This Spike Brewing 1/2” NPT Brew Thermometer is ready to screw directly into the kettle. This 2.5” stemmed thermometer can cover 40-220 degree ranges. The 3” glass dial will display all the information you need at a glance and while withstanding the high heat from the burner below. The thermometer also has calibration screw for added accuracy. 

Read more less

A fast and easy way to test SO2 levels in White Wine.  Includes 10 ampoules to perform 10 SO2 tests.  The test measures in increments of 10, 11, 12, 13, 14, 15, 16, 18, 20, 25, 30, 35, 40, 50, 70, and 100 ppm. Please Note: Results for this SO2 test are acceptable for white wines (with a margin of error up to 10 ppm). This titration test kit is not recommended for use with red wines or white wines containing ascorbic acid or tannin. These wines often give false high test results. A titrettor is a reusable tool that is used with the titrets test ampoules.  

Read more less

The Spike Brewing 1.5" TC thermometer will connect directly to the 1.5" port on your kettle. There is no need for a thermowell which allows for quicker more accurate temp readings. It can be used with direct fired kettles but avoid having the flame lapping directly onto the thermometer. **A 1.5" gasket and clamp will need to be purchased separately if you do not already have spares** Specifications: 1.5" TC connection 3" dial 304SS 2.5" stem length Hermetically sealed Calibration adjustment screw

Read more less

3 ml syringe for BSG branded acid test kit.

Read more less

Glass pipette used for measuring liquids in small quantities.

Read more less

This low energy RAPT enabled Bluetooth Thermometer is compatible with the Gen 4 BrewZilla, RAPT Temperature Controller, and RAPT Fermentation Chamber. It will not work without one or more of these devices. By receiving multiple BLE thermometer sensors, the BrewZilla can make smarter and more automated decisions on how to control the brewing or distillation process.  For example, a BLE thermometer can be placed into your coolant water so you get an alarm if the temperature is too high, or a BLE thermometer can be put into the middle of the malt pipe so you can more accurately control elements switching on/off to achieve a core malt pipe temperature. RAPT ConnectivityThe new Bluetooth thermometer can connect up to your BrewZilla Gen 4, RAPT Temperature Controller, RAPT Fermentation Chamber and log that temperature data and manipulate fermentation/brewing and distillation profiles in the RAPT Portal. This greatly reduces the need for handwritten records of your brew day as it's all done automatically. The RAPT portal also allows you to see every brew you have done in the past with logged temperatures from the main unit's probe and this digital thermometer. This unit can also be set up to get push notifications to your mobile phone of when to sparge for example. Along with this ease of access and control, the RAPT BrewZilla will also allow you to fully customize your brew day with profiles specifically tuned to your style of brewing or your recipe. For example, you could set up step mash profiles using the core temperature of your mash instead of the cavity below where the BrewZilla's main temp probe is located. Greater accuracy for a more repeatable recipe that results in much better beer! Specifications: Temp Range: -4°F – 572°F (-20°C – 300°C) Probe Length: 8" (20 cm) Note that the probe tip is very sharp Remove black plastic tip before use Plastic tip should be used for storage to avoid punctures / injury Cable Length: 39" (100 cm) Magnetized Backing Plate (Orange) 2 x AAA Batteries (included)

Read more less

  Take temperature readings instantly and from a safe distance with this infrared thermometer gun. Use it to check how close you are to the hot break before your boil, or measure the temp of your empty mash tun and grains to help predict temperature loss when you add strike water and mash in. Dual lasers is an important feature when choosing infrared thermometers because it allows for much higher accuracy. When measuring an object, a dual laser thermometer gun will help you greatly in finding the convergence point of the measured target and spot ratio. This can only be achieved with a dual laser unit. Features: Double Laser pointer for higher accuracy Simple one-handed operation Laser ON/OFF switch Low battery indication LED backlight Reads in °F / °C Automatic shutdown after 15 seconds Display hold, Scan function FCC, CE, ROHS Certified Notes: 1. When using this product to measure temperature, consider the ratio between the distance (the length from the product to the measured object) and the size of the measurement area, referred to as the object distance ratio. When the distance between the product and the measured object increases, the measurement area will increase accordingly. 2. If you want to use boiled water to measure the unit's accuracy, do not allow smoke or water vapor to contact the temperature sensing area, and keep the measurement angle at 45 ~ 60 degrees.

Read more less

Glass pipette used for measuring liquids in small quantities.

Read more less

This 60 cm (23.6") long curved glass wine thief if perfect for taking samples of wine from a barrel or carboy for testing.  The curve makes it easier to extract samples if your barrel or carboy happens to be in a tight space. Made in France.

Read more less

Digital. Simple. Compact. Over 200,000 people have relied on the Milwaukee pH600AQ compact pH pen tester to move from difficult to use and interpret pH strips to digital testing. Summary The Milwaukee pH600AQ compact pen tester is specifically designed to help maintain aquariums and aquaculture. Keeping the proper pH improves results for aquarium fish and quality in a range of fish raised in aqulculture. Use digital accuracy to keep pH in your target range for better results. What people are saying "Accurate results and calibrated right out of the box." "Must have for any aquarium owner." "Good value. Easy to use. Consistent." Design features Fast, accurate results with digital LCD readout. Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize. Simple one-point calibration with an easy-to-use trimmer located on the back of the pH tester to protect from accidental splashes. Cap to protect the pH sensor and keep it wet when stored upright. Low power demand for extended battery life (batteries included). Approximate 700 hours of batter use (3 x 1.5 Volt batteries included). For Calibration USE MA9007 230 mL bottle of 7.01 pH calibration solution or M10007B box of (25 sachets 20 mL each) calibration solution.  These solutions are required to operate the meter properly along with the below links for cleaning and maintaining instructions PH-MAIN. Use and Care All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maintenance Kit code PH-Main at checkout time!  This will be needed to help clean and condition the pH electrode before use! Store the pH probe in storage solution MA9015. Only use tap water short-term if MA9015 is not immediately available and NEVER store in distilled Water (DI) or Reverse Osmosis (RO) water. This will damage the sensitivity of the probe. Here are our top four tips.  1. Always store upright with the cap full of MA9015 Storage solution for BEST RESULTS. 2. Clean your pH Pen Tester regularly by soaking in cleaning solution MA9016. Cleaning Solution for about 20 minutes. 3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor. 4. Gently stir the Pen in the sample for a faster result.   Thank you for considering Milwaukee to help you take your results to the next level.

Read more less

A narrow range thermometer and hydrometer combo filled with blue spirit and calibrated for reading at the bottom of the meniscus.  Standardized at 20 degrees Centigrade with a temperature correction scale. 0 - 8.5 Brix 360 mm in length Three Scales Certified  

Read more less

Replacement phenolphthalein indicator for Acid Test Kits. This phenolphthalein is suitable for acid test kits from other suppliers as well. Phenolphthalein will often turn colorless in acidic solutions and red in basic solutions. 1 ounce bottle Ships via ground transportation only.

Read more less

A hydrometer that is utilized to measure the completion of a wine fermentation.  Measures -5 to +5 brix scale.

Read more less

The Escali Triple Event Digital Timer will help you efficiently multi-task with three independent timers.  Each timer is visible from the easy to read display at once so you always their status.  Recall previous timer settings for repetitive tasks and keep track of time with Clock Mode. The include stopwatch function features increments of 0.01 seconds.Time 3 Events at OnceSet three independent timers and view their progress all at once on the easy to read display.Overtime CounterThe timer counts up after an alarm has expired until you press the ‘Start/Stop’ button.Timer & Stopwatch FunctionsCount up or down to a maximum of 19 hours : 59 minutes : 59 seconds.Recall Last Timer SettingRecall the last timer setting automatically at the touch of a button when performing repetitive tasks.Clock ModeWhen the timer is not in use, time is displayed in either 12 hour or 24 hour formats.Magnetic Back & KickstandUse the magnetic back to hang the display on a nearby refrigerator, or place it on a countertop using the built-in kickstand. Specifications Timer Range:  19 hr : 59 min : 59 sec Increments:  Counting down: 1 sec, Counting up: 0.01 sec Dimensions:  3.75 x 2.75 x 0.5 in Battery:  Two LR44 (included)  

Read more less

This thermometer features a 3" face, 1/2" MPT, and a 6" probe. This thermometer is great for a mash tun but may not be suitable for kettles if you're using an immersion chiller due to it's longer probe.

Read more less

MA9015 is a lab grade electrode storage solution prepared with premium chemicals to improve the performance and extend the life of your pH and ORP electrodes, testers and pens. To ensure a quick response and free-flowing liquid junction, the sensing element and reference junction must not be allowed to dry out. Properly storing your pH electrode in a solution keeps the glass membrane well hydrated which maintains proper function and provides accurate readings. MA9015 also helps keep the junction in your pH and ORP electrode flowing which is critical for fast results.  To clean your pH or ORP electrode use MA9016 Cleaning Solution in conjunction with MA9015 Storage Solution. In general, and depending on the frequency of use and the type of application, soak your pH or ORP electrode once per week in MA9016 Cleaning Solution for about 15 minutes. After soaking, remove the electrode, rinse with Distilled Water and put MA9015 Storage Solution in the probe cap before storage. This will keep your pH or ORP sensor hydrated and ready for the next use. Design Features Fundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readings. Formulated to minimize organic growth on your electrode. Sealed against light with air tight, tamper proof cap. Factory blended to precise standards in a dedicated, temperature controlled environment. Simply open and add to the cap of your electrode or tester. Each bottle marked with lot number and expiration date.

Read more less

A perfect pocket temperature probe for homebrewing and BBQ! Check the temperature of your mash, whirlpool additions, or use it to check the internals of that fine-looking Lamb Roast on the bbq! With a range of -58°F to 572°F you will be hard-pressed not to get a temperature reading unless you live in an active volcano...Lava people or something. Specifications: Range: -58°F – 572°F (-50°C – 300°C) Resolution: 0.1°C Temperature Error: +-1°C (0~100°C) Power Supply: 1 x AG13 Battery (included) Functions: On/Off °C/°F Hold  

Read more less

A narrow range thermometer and hydrometer combo filled with blue spirit and calibrated for reading at the bottom of the meniscus.  Standardized at 20 degrees Centigrade with a temperature correction scale. 15.5 - 24 Brix 360 mm in length Three Scales Certified  

Read more less

This stir plate will hold up to a 3000ml flask and features a pH probe holder.   Specifications: On/off switch Variable speed control dial Includes 1" stir bar

Read more less

This stainless thermometer features a 3" face, a 2" probe, and a high temperature food grade silicone gasket. The shorter probe works well with immersion chillers and heat exchangers.

Read more less

Precisely read your finishing gravities in beer with this narrow-range, highly accurate hydrometer. The scale range is only .0.985-1.003, but the individual gradients are extra-large allowing for an easy read.

Read more less

Class A 50ml volumetric glass pipette used for measuring liquids in small quantities. Accurate to within 0.05ml.

Read more less

The Escali Maximum Precision Digital Scale is highly accurate, operator friendly with some of the industry's best features. This scale is a must have tool where high precision weighing is required. Precision IncrementsAccurately measure in grams, ounces, grains, carats, pennyweights and troy ounces.Durable Stainless Steel PlatformThe removable stainless steel plate is dishwasher safe for easy cleaning.Sealed Control PanelThe display and controls are sealed under a protective shield to guard against accidental spills.Tare FeatureReset the scale to zero weight to measure multiple items or subtract the weight of a container.Automatic Shut-offWhen operating on batteries the scale will turn off after two minutes of inactivity to help conserve and extend battery life. Specifications: Capacity: 125g Increments: 0.01 g (0.001 oz) Units: grams (g), ounces (oz), grains (gr), carats (ct), pennyweights (dwt), troy ounces (t oz) Platform Dimensions: 4.5 x 4.5 in Battery: Four AA (included) Available (not included)

Read more less