Draft Supplies
18.5mm Stepless Oetiker Clamp
Stepless Oetiker Clamp, Size 18.5 for 5/8" OD tubing
$0.60 - $11.00
Gas Shut Off Valve
This shut-off valve is for draft beer gas regulators & gas distributors. Specifications: Right Hand 1/4" NPT (National Pipe Threads) 3/8" O.D. (To fit 5/16" I.D. Gas Hose) Does not include a check valve.
$14.99
CO2 Inlet Nipple, LH
CO2 inlet nipple with o-ring tank seal, left hand threads
$9.99
Duotight Mini Gauge 0-15 psi
This mini pressure gauge is compatible with the BlowTie 2 spunding valve, Duotight in-line regulator, and KegLand mini regulator. It is recommend using the gauge with a range closest to your desired pressure setting. Pressure Range: 0-15 psi (0-1 bar) Body Dimensions: 26mm x 26mm x 15mm Probe Diameter: 8mm
$7.70
O-Ring for Stout Faucet Spout
Replacement o-ring for stout faucet spout. TapRite part SF2003-13 Stout Faucet Diagram
$1.50
Coupler Body O-Ring, Perlick
Replacement body o-ring for Perlick couplers.
$0.75
Ball Lock Disconnect (Gas) with Built-in Check Valve, CM Becker
Plastic ball lock gas in coupler with 1/4" MFL. Quick disconnect for ball lock Cornelius (Corny)-type kegs. This disconnect has an internal check valve that will allow the gas to flow out, but won’t allow backflow of liquid back into your system. Internal Check Valve protects your system from liquid back flow! Made in Germany and assembled in the USA by CMB. Extremely high quality for years of service. NSF Approved for Food Grade Service!
$14.99
Drip Tray - 15 in. Wrap Around
Plastic wrap around drip tray. Direct replacement of the drip tray that comes with our kegerators. Removable grill. Well suited for 3" diameter towers. Half-moon cut out measures 4.5" across and 2-3/8" deep Dimensions: 15" L x 10" W x 0.75" H Made from ABS
$14.50
3/8” x 1/2” Splicer - Stainless Steel
Beer line 3/8" x 1/2" stainless steel barbed splicer. Splices 5/16" I.D. Vinyl to 1/2" I.D. Vinyl 1/2" I.D. Vinyl to 3/8" I.D. Poly 3/8" I.D. Poly to 1/2" I.D. Poly Specifications Type: Straight Connectors Material: 304 Stainless Steel
$3.99
Duotight 9.5 mm (3/8 in.) Ball Valve
This Duotight ball valve can be used as an inline shut off valve on beverage lines. Compatible with EVABarrier 9.5 mm OD tubing.Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$5.00
Drip Tray - 14" Wall Mount
14" x 6" brushed stainless steel wall mount drip tray (without drain). Details 304 Stainless steel door mount drip tray with bold brushed finish. Robust 18 gauge Stainless Steel construction. Removal grill for easy cleaning. Finished smooth for safety and appearance with welded corners. Specifications: 304 Stainless Steel Brushed Finish Length: 14" Width: 6" Thickness: 18 guage Back-Splash: 2.7" No Drain Product Sheet
$39.99
Dual Cleaning Flusher for D and S Couplers
This stainless steel dual line flush adapter will work with D and S style couplers. This saves time by making it possible to flush two beer line systems at the same time. The integrated ball lifter in the center of both flushing cups lifts the check ball in the probes to allow easy flushing. Assembly made from Stainless Steel.
$54.00
Duotight 8 mm (5/16 in.) Elbow
This Duotight elbow fitting is compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$2.80
Floating Dip Tube
When using the Torpedo Buoy™ floating dip tube, you can draw the clearest beer possible from the first pint to the last. Included is a 3" metal dip tube, 23.5" length of 1/4" ID silicone tubing, and stainless steel ball float. This floating dip tube is compatible with any ball lock or pin lock homebrew keg. Sized for 5-gallon kegs, but it can be shortened for use with 1.5 or 2.5-gallon kegs. Instructions
$20.00
5/16'' Barbed Co2 Line Tee, Stainless Steel
Stainless steel barbed tee commonly used to splice/split Co2 draft hose. Specifications 304 Stainless Steel 5/16" ID Barbs T Fitting Splices Together 5/16" I.D. Vinyl to 5/16" I.D. Vinyl 5/16" I.D. Vinyl to 3/8" I.D. Poly 3/8" I.D. Poly to 3/8" I.D. Poly
$8.99
KOMOS® Brushed Stainless Draft Tower Kit
KOMOS stainless steel draft tower kit. Includes EVABarrier draft line, and Duotight push-to-connect fittings. These towers do not include faucets so you can add your existing ones or choose new ones. However, Please note that Perlick Flow Control faucets are not compatible with the included Intertap tower shanks. These are the same tower kits included with the KOMOS Kegerator. Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing. Each tower kit comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free. Includes: Stainless steel draft tower with matte black finish Stainless steel faucet shank(s) with Duotight tailpieces EVABarrier gas and beverage tubing Draft tower mounting screws Faucet wrench 1-3 Tap Tower Dimensions: 13.4 in. tall (without faucets) 3 in. tower diameter 4.4 in. base diameter 4 Tap Tower Dimensions: 13.4 in. tall (without faucets) 4.5 in. tower diameter Interior mounting holes (does not include bottom collar)
$72.00 - $143.00
Stainless Butterfly Hose Clamps | 10 Pack | 1/2 in. to 1 in.
These stainless steel butterfly hose clamps are the ideal choice for connecting silicone tubing to quick disconnects, pumps, and more. The butterfly thumb screw allows for toolless tightening and untightening, so you can build out or break down your system without rummaging through the toolbox for the right screwdriver. Fits 1/2 in. OD to 1 in. OD tubing. Actual size of the clamp is 14-25 mm (0.55-0.98 in.). This 10-pack comes in a convenient zip lock bag.
$11.00
0.95mm Stepless Hose Clamps - 1/4 in. OD Tubing
Stainless Steel, Stepless Oetiker Clamp This style of clamp tightens in an exact circle, making them ideal for use with draft lines. 0.95mm for 1/4" OD Tubing. (6-8mm OD) This clamp will fit our 8mm OD EVABarrier double wall draft tubing. Stepless Clamp Tool sold separately.
$0.60 - $11.00
10.5mm Stepless Hose Clamp - 5/16 in. to 3/8 in. OD Tubing
Stainless Steel, Stepless Oetiker Clamp This style of clamp tightens in an exact circle, making them ideal for use with draft lines. 10.5mm for 5/16" to 3/8" OD Tubing. (7-10mm OD) This clamp will fit our EVABarrier double wall draft tubing. Stepless Clamp Tool sold separately.
$0.60 - $11.00
Inlet Fitting Nut
Replacement chrome plated nut for Co2 Inlet stem. CGA-320 thread (Intended for use with a CO2 Regulator)
$7.99
3" Chrome Plated Beer Shank Assembly
Chrome plated beer shank assembly Specifications: Chrome plated brass shank 3-1/8" length 1/4" bore plastic flange Does not include hose tailpiece Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
$19.99
Sankey D & S System Spear removing / Opening Demounting Tool
Sankey D and S System Spear removing / Opening Demounting Tool Stainless steel commercial keg opening tool. Suitable only for D and S system kegs also called American and European Sankey kegs respectively. Use this Keg spear demounting tool for cleaning and servicing. Spanner tool to remove the spear from a D-TYPE or S-TYPE keg Sturdy tool with a long rod for easy handling Always degas before proceeding to remove keg valve.
$39.99
Duotight Ball Lock Quick Disconnect (9.5mm) - Beverage Out
The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world. Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. Enter the Duotight Ball Lock QD. The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably with no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitizing an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings (no cheap ABS plastics here) this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitizers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required This particular ball lock disconnect has been designed for use with EVABarrier 9.5 mm OD Tubing. Due to the integrated Duotight fitting the line will simply push directly into this fitting. Ball Lock Quick Disconnect - Beverage Out Direct connect 8 mm OD EVABarrier tubing Compact design won't interfere with keg stacking Made from highly chemical resistant materials Disassemble by hand for quick and easy cleaning
$8.80
Co2 Gas Regulator Y Fitting, Chrome Plated Brass
Co2 gas regulator wye fitting for adding an additional shutoff. Specifications Material: Brass Finish: Chrome Plated Brass Thread Size: 1/4MPT x 1/4 FPT x 1/4 FPT Warnings / Instructions Important information: Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
$7.99
Perlick 630SS Stainless Faucet
With all stainless steel construction, Perlick faucets are some of the best around. The forward sealing design helps prevent contamination in your faucet and reduces sticking.
$64.99
Perlick 650SS Flow Control Faucet
Perlick’s 650SS forward sealing stainless steel faucet has a flow control knob to help reduce foaming. The beer only drains from the 1” nozzle, helping to prevent sticking and reduce contamination.
$89.99
Regulation Cone for Stout Faucet Spout
Replacement regulation cone for stout faucet spout. Stout Faucet Diagram
$2.50
Beer Line Tidy - Beer and Gas Line Organizer
This Kegland beer line tidy is a handle little part that will help you organize your beer and gas line inside your fridge, keezer, kegerator or cellar. Simply remove the paper backing and use the strong 3M adhesive to attach this beer/gas line organizer to whatever device you like. This keeps your beer and gas plumbing neat and tidy so your draft system looks as good as it works. Primarily designed for 8 mm (5/16") OD tubing, but works with 9.5 mm (3/8") OD and 6.35 mm (1/4") OD tubing as well. Note: for best results, apply the adhesive at room temperature and let stand for 72 hours before applying load.
$3.60
Duotight 9.5 mm (3/8 in.) Tee
This Duotight tee fitting is compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$3.70
Drip Tray - 6" x 6" Wall Mount
6" x 6" brushed stainless steel wall mount drip tray (without drain). Details: Stainless steel door mount drip tray with bold brushed finish. Robust 18 gauge Stainless Steel construction. Three keyholes on backsplash plate for easy mounting. Removal grill for easy cleaning. Finished smooth for safety and appearance with welded corners. Specifications: 304 Stainless Steel Brushed Finish Length: 6" Width: 6" Depth: 3/4" Back-Splash: 2.7" Thickness: 18 gauge No Drain Product Sheet
$21.99
Stainless Steel Faucet Lever
304 stainless faucet lever replacement for most standard U.S. draft faucets.
$11.99
KOMOS® Draft Line Cleaning Coupler
This male to male coupler is commonly used in draft line cleaning. It allows the connection of draft lines for cleaning loops. Male beer thread to male beer thread.
$14.99
3/16” x 5/16” Splicer, Stainless
Splice together 3/16" ID and 5/16" ID tubing with this 303 stainless steel hose splicer.
$3.74
Duotight 9.5 mm (3/8 in.) x 1/2 in. Bulkhead
This Duotight Bulkhead is the same one used for installing the Temp Twister cooling coil into the lid of the FermZilla. Allows you to add a bulkhead to just about anything that can then be connected to with EVABarrier 9.5 mm OD Tubing or 3/8" OD stainless or copper tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$6.60
3/16” x 3/8” Splicer, Stainless
Splice together 3/16" ID and 3/8" ID tubing with this 303 stainless steel hose splicer.
$3.99
KegLand Cold Activated Keg Filler Stickers | Pack of 4
These keg filler stickers are designed to help you quickly check the fill volume, especially when filling cold beverages like cold-crashed beer. When the liquid inside is cold, the color changes from yellow to green. For 5-gallon kegs, you will need to apply 2 stickers if you want the gauge to run the full length of your keg. Size: 8.85" x 0.47" Color Warm: Yellow Color Cold: Green
$4.99
