Draft Supplies
Replacement PRV (65 psi)
Replacement pressure relief valve rated to blow at 65 psi. This is a direct replacement of the PRV featured on the KOMOS® CO2 regulator. The Green PRV can also be used with pressurizable FermZilla models for hydro testing. Note that under normal operation, the FermZilla should always be used with the Red PRV (35psi).
$7.70
3-Way Gas Manifold
3-way horizontal gas manifold without safety pressure release. 3/8" barbed inlet (3) 5/16" barbed shut-offs Shut-offs do not include check valves Aluminum body
$44.99
'A' System "German Slider" Tap
This A System "German Slider" keg coupler is manufactured my Micro Matic, a leader in the beverage dispensing industry. The A system tap is commonly referred to as the "German Slider" because it slides onto the valve face. This makes for a quick and easy installation. The keg coupler connects to the keg valve, "tapping" the keg. Both the gas line from the CO2 tank/regulator and the beer hose to the beer faucet attach to the coupler. It is used by breweries such as Hoegaarden, Paulaner, Spaten, and Warsteiner. FEATURES Slide on keg connection 304-grade stainless steel probe for the ultimate in purity Short handle ideal for 1/6th barrel kegs and keg with a rubber chime Ergo lever handle Easy to engage: push down to tap/pull up to untap PRV (pressure relief valve) Fits A System keg valves Easy to use Excellent for beer, cocktails For home or commercial use
$95.99
NukaTap Mini Beer Faucet | Duotight Adapter | 8 mm (5/16")
This Duotight 8 mm (5/16") adapter is designed to suit the Nukatap Mini and will allow you to couple the faucet to a wide range of other 8 mm Duotight fittings. This includes attaching it to the Duotight Flow Control Ball Lock Disconnect. This particular type of flow control ball lock disconnect includes a "tang" at the top of the push in fitting that couples with this adapter. The combination of the two fittings prevents the faucet from spinning around while in use.
$7.70
Non-Return Torpedo Valve
Replacement non-return torpedo valve for keg couplers. Similar to a check ball but more commonly found in A, G, and U style couplers. This valve prevents beer in the line from returning to keg.
$4.99
Beer Faucet Bonnet Angler
Also called a faucet positioner because it angles big tap handles from touching the wall or refrigerator. Installs on top of beer faucet lever and then the tap handle thread into this bonnet angler. Made from chrome plated brass.
$8.99
Check Valve with Insert
Non-return check valve with insert. Commonly used in U and G system couplers.
$3.49
Faucet Lock, Wrap Around, Krome
Made from chrome plated brass, this lock is easy to remove and install on your faucet. It features a hardened steel locking hasp and lock that are keyed alike, a brass tumbler, and two keys.
$34.95
Faucet Shaft Assembly
Draft faucet shaft assembly with seat. 304 stainless steel.
$12.99
Drip Tray - 6" x 4" Wall Mount
6" x 6" brushed stainless steel wall mount drip tray (without drain). Details: Stainless steel door mount drip tray with bold brushed finish. Robust 18 gauge Stainless Steel construction. Three keyholes on backsplash plate for easy mounting. Removal grill for easy cleaning. Finished smooth for safety and appearance with welded corners. Specifications: 304 Stainless Steel Brushed Finish Length: 4" Width: 6" Depth: 3/4" Back-Splash: 2.7" Thickness: 18 gauge No Drain Product Sheet
$21.99
Duotight 8mm (5/16) x 1/4" BSP Male Bulkhead
This Duotight Bulkhead is the same one used for installing the Thermowell into the lid of the FermZilla. Allows you to add a bulkhead to just about anything that can then be connected to with EVABarrier 8 mm OD Tubing or 5/16" OD stainless or copper tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals.
$5.00
Tower Surface Drip Tray with Drain
Made from 304 stainless steel, 12" x 7" x .75" drip tray with drain assembly. This will fit a 3" beer column.
$44.99
SS304 Cooling Coil - 50' x 5/16'' OD
304 Stainless Steel Cooling Coil. Includes grommets, ferrules, and hex nut fittings for easy connection to shanks. Specifications: Material: Stainless Steel 304 Size: 50ft x 5/16" OD (Tube) Diameter: 5.25" (coil) Height: 6.75" (coil)
$99.99
Duotight Push-In Fitting - 9.5 mm (3/8 in.) Plug
This Duotight plug is used to block up your 9.5 mm (3/8") tees, elbows or other fittings for gas leak testing or simply to plug an unused section. Features: Insert plug and firmly push to connect Release plug by pushing in the collet on the Duotight fitting Suitable for both gas & beverage applications Made from food-grade acetal plastic Temperature rated to 212°F (100°C)
$1.80
Coupler and Hex Nut Wrench
Keg coupler probe and hex nut wrench
$9.95
Tower Surface Drip Tray w/o Drain
Stainless steel cut out surface mount drip tray with brushed finish 16 gauge stainless steel construction Finished smooth for safety and appearance with welded corners Removable grill for easy cleaning 12"L x 7"W x .75"D Will fit a 3" beer column
$34.99
Stainless Steel 12''x5'' Drip Tray, no drain
Surface mount drip tray without drain. Stainless Steel 12" x 5" Made in USA
$29.99
CO2 Gas Cylinder Holder
Adjustable chain to fit cylinder diameter. Holder for Cylinder 1 Can hold the cylinder maximum of 166mm Diameter
$7.99
Deluxe Counter Pressure Bottle Filler
Flush and fill your bottles with ease. This filler has all the great features of the Counter Pressure Bottle Filler with the added benefit of a pressure gauge and flared connections. The gauge helps monitor pressure inside of your bottles and the flared connections make cleaning your lines a breeze. The valve has three positions: off, beer, and gas. Insert filler into the bottle in the off position, switch to gas to flush the bottle with CO2, and then switch to beer to fill your bottle. You can control the speed of your flow with the adjustable pressure relief. This filler is designed for use with 12 oz. bottles but can be used with larger formats by attaching a small piece of 1/4" tubing to the filler.
$109.00
Chrome Plated Brass Ferrule for 3/8'' ID SS Tubing
Brass ferrule for jockey box cooling coil. Chrome plated brass with a 3/8" ID bore.
$3.50
3/8'' x 50' Stainless Draft Coil
3/8" x 50' 304 Stainless Steel Coil This 3/8" draft coil will hold more beer than your typical 5/16" coil meaning it will cool your beer quicker and it will take less CO2 to serve your beer. Using less CO2 will help reduce over carbonating your beer which results in less foam.
$99.00
Duotight 9.5 mm (3/8 in.) x 1/2 in. BSP Ball Valve
This Duotight ball valve with 1/2" male thread is perfect for attaching to the water input on the Copper Counterflow Chiller, allowing you to adjust the water flow while chilling your wort. Compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$5.00
Duotight 9.5 mm (3/8 in.) x 1/2 in.FPT
This Duotight to 1/2" female thread fitting can be used to connect beverage or gas line to any fitting with 1/2" MPT. Compatible with EVABarrier 9.5 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$3.30
Gas Pressure Relief, Stainless
Gas Manifold - Pressure Relief Valve 1/4" Male ThreadingSet to blow off at 55psi.
$11.00
Bottom Gasket, A, G, M Keg Couplers
''A'' and "G" System Keg Coupler Main Gasket May also fit "M" and "Key" couplers
$6.00
Slimline Torpedo Keg Dip Tube | Beverage Out | Corny Keg Part
Replacement Beverage Dip Tube for the slimline Torpedo Kegs.
$10.99 - $13.49
'A' System with Chrome Plated Brass Body - Stainless Steel Probe
Best keg coupler for beer dispensing from S system kegs. Built for both commercial and home use. Align the coupler base with the keg valve and lock it in place by pulling the handle out and down. This A system keg tap coupler body is Brass with a Chrome layer while the Probe is of SS 304 grade. Durable coupler with an ergonomic lever style handle. A system keg couplers are also called German sliders. This is because they are used by popular German breweries and are slide-on style over the keg valve.See our different gas inlet thread sizes and with and without PRV options to pick the one for your needs. A system keg coupler is commonly referred to as the German slider. It is designed to fit many German beers such as Hacker-Pschorr, Hoegaarden, Paulaner, Pimms, Spaten, Warsteiner, and others. Always use the same coupler type as your keg. Durable Brass body with Stainless steel 304 probe – gives only SS contact with your beer. Pressure Relief valve included for safety. Releases overpressure gas at 56 – 65 PSI 5/8″ x 14 BSP threads for beer outlet. Slide on keg valve connection with sleek black handle.
$59.99
Inlet Co2 Filter
The inlet Co2 filter helps to filter out contaminates from Co2 Gas. Inserts inside the Micro Matic Premium Regulator inlet stem.
$2.00
Beer Nut Inlet Seal
Beer Nut Inlet Seal for Micro Matic Premium 640 Series Regulators.
$2.00
3-1/8″ Standard Wine Shank – 1/4″ Bore I.D
This 3-1/8" shank is made of 316 surgical grade stainless steel making it more resistant to the acidic nature of wine. Includes: 3-1/8" 316 stainless steel shank with 1/4 bore Forged brass lock nut Black plastic flange Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. Made in India
$16.99
2-1/8" Shank Assembly - Stainless Steel
Stainless Steel Beer Faucet Shank Assembly - 2-1/8"L with 1/4" Bore. Made of 304 stainless steel, this NSF certified shank can be used for any beverage. A high-end shank is crucial to serving up perfectly fresh beverages from a draft faucet. The stainless steel beer faucet shank assembly is inserted through your refrigerator or house wall. On one end, inside the fridge, you attach the beverage lines. On the other end, the shank is connected to your draft faucet. This Micro Matic, NSF-certified beer shank is made of 304-grade stainless steel and is excellent for any beverage. The shank assembly uses Micro Matic's SpinStop™ technology, a simple solution that stops the spin and keeps the faucets upright. Includes the flange, coupling nut, and lock nut necessary to attach it to the draft tower and faucet. Designed with 7/8"-14 (5/8" BSP U.S. Beer Industry Standard) straight pipe thread, this shank will work with all North American faucets. If you're using equipment from outside North America, you'll need to source a specialty shank. STAINLESS STEEL SHANK FEATURES The best in purity - only 304 stainless steel touches the product Complete assembly Connects beverage lines to the faucet Excellent for any beverage Highly durable Micro Matic's SpinStop™ technology – keeps the faucets upright Fits on North American faucets NSF certified Specifications Use: Dispensing Wine / Cider / Beer Length: 2-1/8" Bore I.D.: 1/4" Material: 304 Stainless Steel Approval: NSF Certified
$30.99
3-1/8" Beer Shank Assembly – Chrome Plated Brass
Beer Shank Extension Faucet Assembly - 3-1/8"L with 1/4" Bore. This Micro Matic, NSF-certified Beer Shank Extension Faucet Assembly is made of chrome-plated brass and is excellent for both home and commercial bars. The beer shank assembly uses Micro Matic's SpinStop™ technology, a simple solution that stops the spin and keeps the faucets upright. The assembly includes the flange, coupling nut, and lock nut necessary to attach it to the draft beer tower and beer faucet. Designed with 7/8"-14 (5/8" BSP U.S. Beer Industry Standard) straight pipe thread, this shank will work with all North American faucets. If you're using equipment from outside North America, you'll need to source a specialty shank. A high-end beer shank is crucial to serving up perfectly fresh beer from a draft beer faucet. The beer shank is inserted through your refrigerator or house wall. On one end, inside the fridge, you attach the beer lines. On the other end, the shank is connected to your draft faucet. Features Complete assembly Chrome-plated brass Connects beer lines to the faucet Micro Matic's SpinStop™ technology – keeps the faucets upright Highly durable Fits on North American faucets NSF certified Specifications Length: 3-1/8" Bore I.D.: 1/4" Thread: 7/8"-14 (5/8" BSP) (U.S. Beer Industry Standard) Material: Chrome Plated Brass Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
$19.99
1/4" x 1/2” Splicer - Stainless Steel
Beer line 1/4" x 1/2" stainless steel barbed splicer. Splices 3/16" I.D. Vinyl to 3/8" I.D. Vinyl 3/16" I.D. Vinyl to 1/2" I.D. Vinyl 1/4" I.D. Poly to 1/2" I.D. Vinyl Specifications Type: Straight Connectors Material: 304 Stainless Steel
$3.99
1/4" Barbed Ball Valve
Plastic ball valve with 1/4" barb fittings on each end.
$9.99 $6.99
Stainless BSP Washer - 3/8 in.
Stainless steel 3/8" BSP washer.
$3.30
Snap Clamp for 1/4" ID Draft Tubing
Plastic snap clamp for 1/4" I.D. vinyl draft hose.
$1.00
