Draft Supplies

Replacement O-rings for Intertap Flow Control faucets.

Read more less

Specification Brass 45° Flare Fittings SwivelFemale Flare Thread Size: 1/4" FFL x 1/4" FFL

Read more less

90 degree barbed swivel elbow stem and nut. Specifications: Barb with fit 1/4" ID tubing. Nut is a 1/4" flare fitting. 304 Stainless Steel.

Read more less

Duotight 6.5 mm (1/4 in.) x 9.5 mm (3/8 in.) Reducer Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!  Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) 

Read more less

Male quick disconnect with a 1/4" female barb. Includes a shutoff that seals the valve when not connected to tubing.

Read more less

Stainless Steel 14"x6" drip tray without drain. Stainless steel with  brushed finish. Robust 18 gauge Stainless Steel construction. Finished smooth for safety and appearance with welded corners. Removable grill for easy manual cleaning.

Read more less

Rubber grommet for chrome plated brass ferrule with 3/8" ID bore.

Read more less

This Duotight joiner fitting is compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!  Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

12" x 6" brushed stainless steel wall mount drip tray (without drain). Details: Stainless steel door mount drip tray with bold brushed finish. Robust 18 gauge Stainless Steel construction. Three keyholes on backsplash plate for easy mounting. Removal grill for easy cleaning. Finished smooth for safety and appearance with welded corners. Specifications: 304 Stainless Steel Brushed Finish Length: 12" Width: 6" Depth: 3/4" Back-Splash: 2.7" Thickness: 18 gauge No Drain Product Sheet

Read more less

Faucet shank coupling nut, chrome plate, 1 1/8 - 18.  

Read more less

Easily connect a gas ball lock fitting into your Tapcooler Counter Pressure Bottle Filler with this handy ball lock CO2 adapter! Made of aluminium.

Read more less

This Duotight fitting with 1/2" male thread is perfect for attaching to the Copper Counterflow Chiller and using with 1/2" female threaded Camlock and QD fittings. Compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!  Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) 

Read more less

Replacement Beverage Dip Tube for the standard Torpedo Kegs.

Read more less

Stainless steel barbed splicer generally used for attaching two pieces of beer draft line. Specifications 304 Stainless Steel OD: 1/4" ID: 1/16" Splices Tubing Sizes 3/16" I.D. Vinyl to 3/16" I.D. Vinyl 3/16" I.D. Vinyl to 1/4" I.D. Poly 1/4" I.D. Poly to 1/4" I.D. Poly

Read more less

Left hand thread (LHT), brass hex nipple generally used for regulator and manifolds.  Specifications: 1/4" NPT x 1/4" NPT (LHT) 9/16" hex 1-3/8" length

Read more less

Beer line 1/2" x 1/2" stainless steel barbed splicer. Splices 3/8" I.D. Vinyl to 3/8" I.D. Vinyl 3/8" I.D. Vinyl to 1/2" I.D. Poly 1/2" I.D. Poly to 1/2" I.D. Poly Specifications Type:  Straight Connectors Material:  304 Stainless Steel O.D.:  1/2" I.D.:  3/8"

Read more less

This 304 stainless steel shank made by Micro Matic is a perfect option for serving up fresh beverages from a draft faucet.  The shank provides a bulkhead through your refrigerator door.  The end that is inside the fridge you attached your beverage line with a tailpiece and hex nut.  On the other end of the shank you attach your draft faucet. This NSF-certified shank is made of 304-grade stainless steel and is excellent for any beverage. The shank assembly uses Micro Matic's SpinStop™ technology, a simple solution that stops the spin and keeps the faucets upright. Includes the flanges, coupling nut, and lock nut necessary to attach it to the draft tower and faucet. Designed with 7/8"-14 (5/8" BSP U.S. Beer Industry Standard) straight pipe thread, this shank will work with all North American faucets. FEATURES The best in purity - only 304 stainless steel touches the product Complete assembly Connects beverage lines to the faucet Excellent for any beverage Highly durable SpinStop™ technology – keeps the faucets upright Fits on North American faucets NSF certified SPECIFICATIONS Dimensions: 3-1/8"L Bore Dimensions: 1/4" I.D. Shank thread: 7/8"-14 (5/8" BSP U.S. Beer Industry Standard)

Read more less

Plastic snap clamp for 1/2" I.D. vinyl draft hose.

Read more less

Plastic snap clamp for 5/16" I.D. vinyl draft hose.

Read more less

Stainless steel hose clamp for 1" to 1 5/8" OD tubing.

Read more less

The Duotight In-Line Regulator works with both gas and liquid. Easily adjust the flow can be adjusted with the yellow adjustment knob. 6.35 mm Duotight fittings at both inlet and outlet make this unit perfect for use with 6.35 mm OD tubing.  Features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The analog gauge is removable and can be swapped out with a gauge of a different pressure range or it can be swapped out for the Digital Mini Pressure Gauge. The size of the Duotight connection and the extended 0-150 PSI pressure range makes this model perfect for stepping down the pressure of your mains water line for use with water filtration or RO systems. Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 6.35mm (1/4") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-150 psi Made with quality EPDM seals Wall mountable WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge.

Read more less

Draft Beer CO2 regulator to nitrogen tank adapter Quickly converts a Nitrogen into a CO2. If you own a nitrogen regulator and want to use it on a Co2 tank, then the following adapter can save you money! Simply screw on one side of the adapter to your nitrogen regulator and the other side to your Co2 tank valve. Connects a nitrogen regulator to CGA-320 Co2 tank valve

Read more less

Threaded Nipple with 3/8" O.D. Hose Barb (Right Hand Thread) Right Hand 1/4" NPT to 3/8" barb

Read more less

Threaded Nipple with 1/4" O.D. Hose Barb (Right Hand Thread) Right Hand 1/4" NPT to 1/4" barb

Read more less

This Premium Plus low pressure primary regulator has a 15 PSI gauge head for accurate adjustment in low pressure dispensing applications. Many wine and cask conditioned systems use 5 PSI or lower for dispensing and maintaining a low pressure blanket on the wine or beer. For added safety, this model has an integrated pressure relief valve that stops the gas flow if the pressure gets too high (55-65 PSI). Premium Plus regulators come standard with a tamper-evident adjustment screw and bonnet, preventing unauthorized adjustment to gas pressure which can cause service issues. FEATURES Adjust pressure from 0 to 15 PSI Built for durability: forged brass body, accurate machining, chrome-plated finish Premium quality metal gauges for durability Tamper-evident adjustment screw and bonnet Nickel-plated valve seats for high corrosion resistance Enlarged CO2 port for high volume Safety relief valve releases at 55-65 PSI Factory leak tested at 145 PSI Made in the USA Excellent for dispensing keg wine and cask beer Specifications: Performance: 1 Pressure / 1 Product Height: 7-1/4" Width: 3-3/4" Depth: 5-1/2" Pass-thru barbs, Includes plug  

Read more less

Economical fiber washer for CO2 regulator. Fits between the gas cylinder and regulator connection. 10 Pack

Read more less

This matte black, stainless steel tower shank is the ideal match for the NukaTap Stealth Bomber faucet.  The 1/4" tailpiece is Duotight compatible and pairs perfectly with the Duotight 6.5 mm x 8 mm reducer, allowing you to quickly and easily connect 8mm OD EVABarrier draft line. Duotight fitting pictured is sold separately. Please note these shanks are not compatible with Perlick brand faucets. WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov    

Read more less

Replacement star lock washer for dual shank.

Read more less

Replacement keg beer regulator CO2 Inlet Nipple. Specifications: 1/4" NPT Left Hand Thread (LHT) 2-1/4" Length

Read more less

Chrome plated beer shank assembly Specifications: Chrome plated brass shank 2-1/8" length 1/4" bore plastic flange Does not include hose tailpiece Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Read more less

3" Special Shank Assembly for Jockey Box. Material: Stainless Steel Bore: 1/4" x 5/16"

Read more less

Faucet shank barrel sleeve

Read more less

Allows you to easily use a 74g CO2 cartridge with your 16g hand held keg charger. This adapter has a 5/8" male end and a 3/8" female end.

Read more less

Replacement pressure relief valve rated to blow at 17 psi. Fits FermZilla and Kegmenter. It is also compatible with homebrew kegs and the KOMOS® CO2 regulator if you desire a lower blowoff pressure.

Read more less

Micro Matic has developed a new dispense head for KeyKeg™ one-way kegs which makes it even safer, easier and more convenient to use. The keg coupler connects to the keg valve, "tapping" the keg. Both the gas line from the CO2 tank / regulator and the beer hose to the beer faucet attach to the coupler. Features: Convenient to use integrated degassing function Degassing takes only 10 seconds No special tools needed for degassing 304 Stainless Steel probe for the ultimate in purity Excellent for beer, wine, coffee, cider, etc. Easy to tap with no product splash Easy to engage handle: push down to tap/pull up to untap Specifications: System: KeyKeg™ Probe Material: 304 Stainless Steel Handle Style: Ergonomic Lever Gas Port: 3/8" O.D. Barb (To fit 5/16" I.D. Gas Hose) Beer Port: 7/8"-14 Thread (U.S. Beer Industry Standard) Integral PRV: For safety: pressure relief valve releases at 55-65 PSI

Read more less