Draft Supplies

Turns an Intertap or Nukatap faucet into a self closing faucet by forcing it to the closed position when you let go of the handle. Made from 304 stainless steel. Faucet not included. This spring is not compatible with the Nukatap flow control faucet or other brands of faucets. For the Nukatap flow control spring, click here

Read more less

Micro Matic 304 stainless steel, Sankey D probe coupler for American kegs.  Good for dispensing beer, wine, and cider. "D" system is the most common system available in the U.S., also known as American Sankey. It is used by all the major breweries Anheuser-Busch, Miller, Molson-Coors, and Labatt as well as most craft breweries. The keg coupler connects to the keg valve, "tapping" the keg. Both the gas line from the CO2 tank/regulator and the beer hose to the beer faucet attach to the coupler. Specifications: 304 stainless steel body improves durability and resistance to chemicals 304 stainless Steel probe for the ultimate in purity Excellent for beer, wine, and cider 304 stainless steel handle fork for added strength Short handle is ideal for the smaller diameter 1/6 kegs NSF approved Made in the USA

Read more less

Concave check valve for sanke style keg couplers. This check valve helps to prevent liquid from backing into the Co2 line.

Read more less

In normal rear-sealing faucets the entire faucet has to drain of beer. Intertap faucets are forward-sealing which keeps beer in it so the inside doesn't have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavors transfering to your beer while you pour.Other 'perl' forward sealing faucets use a floating o-ring, which is just as sanitary but requires the o-ring to move inside the faucet body in order to seal correctly. This can become a problem as the faucet ages. Intertap faucets use a sliding shuttle that guides the o-ring into the perfect position every time. The threaded spout easily unscrews from the faucet and can be replaced by a growler filler or stout spout quickly and easily. Pour a pint and then fill a growler in no time at all.Made of chrome plated brass. Proposition 65 notice: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Read more less

Improve the hygiene of your kegerator faucets with these nylon caps.  

Read more less

This plastic ball lock cap features soda bottle threads, allowing you to convert a soda bottle into a pressurized growler. It is compatible with both gas and liquid ball lock disconnects. Also works well for cleaning draft lines. Simply add line cleaning solution to a soda bottle, attach it to the draft line, and open the faucet to push solution through. When using two ball lock caps, it is recommend pairing this yellow plastic cap with a red plastic cap so you can easily identify which caps are being used for liquid or gas. This cap can also be attached to the FermZilla collection container, enabling you to purge the collection container of oxygen. Specifications: Liquid and Gas Ball Lock Compatible Overall Length - 2.5" Barb Length - 7/8" Barb OD - 1/4" Barb ID - 3/16" 28 mm PCO 1881 Threads

Read more less

15.7mm Stainless Steel, Stepless Oetiker Clamp This style of clamp tightens in an exact circle, making them ideal for use with draft lines.  For 5/16" ID Vinyl Tubing Stepless Clamp Tool sold separately.

Read more less

In store pick up only.  Does not ship. Filled 10 pound aluminum CO2 cylinder. Will dispense approximately 18 five gallon kegs before needing to be refilled or exchanged. Dimensions: 20.75" Tall x 7" wide.  These are used cylinders that have been filled from a local vendor.

Read more less

Stainless Steel, Stepless Oetiker Clamp This style of clamp tightens in an exact circle, making them ideal for use with draft lines.  12.8mm for 7/16" OD Tubing.  (10.5-12.5mm OD) This will fit our 3/16" ID clear/black draft tubing. Stepless Clamp Tool sold separately.

Read more less

Replacement o-ring for Cornelius keg lids.

Read more less

Replacement o-ring for Cornelius keg dip tubes.

Read more less

This Duotight to Female Beer Thread fitting can be used to connect beverage line to faucet shanks instead of a tailpiece, and it's also a convenient option for connecting gas and beverage line to the gas in and bev out on keg couplers. Compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world.  Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. Enter the Duotight Ball Lock QD. The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably with no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitizing an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings (no cheap ABS plastics here) this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitizers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required This particular ball lock disconnect has been designed for use with EVABarrier 8 mm OD Tubing. Due to the integrated Duotight fitting the line will simply push directly into this fitting. Ball Lock Quick Disconnect - Gas In Direct connect 8 mm OD EVABarrier tubing Compact design won't interfere with keg stacking Made from highly chemical resistant materials Disassemble by hand for quick and easy cleaning Duotight Ball Lock QDs are offered in three sizes that correspond to the outer diameters seen on our line of EVABarrier Draft Tubing.  6.35 mm OD – features a very tight 3 mm ID that requires only 3.2 ft of length for adequate flow resistance. This is the ideal size for mobile draft or if you want to keep your kegerator as tidy as possible. 8 mm OD – the most common OD size of EVABarrier tubing. This size comes in two IDs (4 mm & 5 mm) and pairs up with the lion's share of Duotight fittings and accessories. 4 mm ID is our most recommended size for beverage lines, requiring 5-6 ft. lengths. 5 mm ID is commonly used as gas line or when 10-12 ft. beverage lines are required. 9.5 mm OD – suitable for gas lines or long draw beverage lines. At 6.3 mm ID, this size is ideal for beverage lines that will be 20 ft. or longer in length.

Read more less

Butterfly screw clamps are a time-saving product. Forget about using screw drivers or other tools to tighten these clamps, all you need is your hands. This size is appropriate for the 9/16" hose. 10 mm (0.39") is the minimum opening and 16 mm (0.62") is the maximum. Band and Housing are AISI #430 stainless steel. Band width is 9mm (0.39") Orange plastic handle

Read more less

EVABarrier double wall tubing is an excellent choice for all draft dispensing applications. The inner barrier is an excellent gas barrier, keeping oxygen out and CO2 in. The inner wall is also extremely smooth to prevent bacteria and other microbes from attaching to the inside surface. The outer barrier gives the tubing a decent stiffness while still remaining pliable. This makes EVA Barrier remarkably kink resistant and the perfect choice for use with Duotight, John Guest, and other push-in fittings.   The 5 mm (13/64") ID size is perfect for draft applications where a longer beverage line is needed. It is recommended to use 10-12 ft. per line for adequate flow resistance.   Specifications: Inner Diameter - 5 mm (13/64") Outer Diameter - 8 mm (5/16") PVC, BPA , and Plasticizer Free* Outer wall prevents oxidation and CO2 loss Smooth inner wall prevents microbial growth build-up  *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects.

Read more less

Butterfly screw clamps are a time-saving product. Forget about using screw drivers or other tools to tighten these clamps, all you need is your hands. This size is appropriate for the 3/8" ID tubing. 8 mm (0.31") is the minimum opening and 12 mm (0.47") is the maximum. Band and Housing are AISI #430 stainless steel. Band width is 9mm (0.39") Blue plastic handle

Read more less

This pump is a budget solution for dispensing beer and cider at parties, picnics, and special occasions.  Since this is a hand pump tap, it is best when dispensing a whole keg that same day or night. For use with American sanke D style kegs.

Read more less

This modular gas manifold will allow you split one CO2 line to multiple ones.  Each line can be turned off individually without affecting the flow to other kegs.  Each ball valve contains a check valve that ensures no beer or gas can flow between the two kegs.  The barbs are all 5/16" which is standard for gas line in the beer industry.   If later, you decide to add an additional keg this manifold can be expanded using the Add On Assembly.

Read more less

New dual rubber handle, ball lock stainless steel keg. Features: 5 gallons Rated to 130 PSI Dry hop tab under keg lid 304 stainless steel NSF certified 24.75" h x 8.375" diameter Imported from China  

Read more less

Butterfly screw clamps are a time-saving product. Forget about using screw drivers or other tools to tighten these clamps, all you need is your hands. This size is appropriate for the 1/2" ID tubing. 12 mm (0.47") is the minimum opening and 20 mm (0.78") is the maximum. Band and Housing are AISI #430 stainless steel. Band width is 9mm (0.39") Green plastic handle

Read more less

1/4" ID clear vinyl beverage and gas tubing. Accuflex Bevlex 200 PVC Tubing is used for draft beer transfer and BIB soft drink applications. Its special dual durometer construction combines a low extraction inner contact surface with a flexible outer layer to provide excellent kink resistance and taste protection. NSF-51 Listed. Inside Diameter (ID): 1/4" Outside Diameter (OD): 1/2" Clamp Size: 14.5mm  Prop 65 Warning: This product contains phthalates (DEHP, DBP, BBP), a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.  

Read more less

The Nukatap beer faucet features a forward sealing design. In normal rear-sealing faucets the entire faucet has to drain of beer. In forward-sealing faucets the faucet keeps beer in it so the inside doesn't have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavors transfering to your beer while you pour. Similar to the Intertap line of faucets, but with improved laminar flow and reduced first pour foam due to its lower thermal mass. The Nukatap is compatible with all Intertap spout accessories. Features: Made from stainless steel Shuttle made from TPV O-rings made from EPDM Chrome finish

Read more less

Stainless Steel, Stepless Oetiker Clamp This style of clamp tightens in an exact circle, making them ideal for use with draft lines.  14.5mm for 1/2" OD Tubing.  (12-14mm OD) Stepless Clamp Tool sold separately.

Read more less

Clean, smooth edges-durable and strong. Made from 300 series stainless steel.

Read more less

The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world.  Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. Enter the Duotight Ball Lock QD. The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably with no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitizing an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings (no cheap ABS plastics here) this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitizers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required This particular ball lock disconnect has been designed for use with EVABarrier 8 mm OD Tubing. Due to the integrated Duotight fitting the line will simply push directly into this fitting. Ball Lock Quick Disconnect - Beverage Out Direct connect 8 mm OD EVABarrier tubing Compact design won't interfere with keg stacking Made from highly chemical resistant materials Disassemble by hand for quick and easy cleaning

Read more less

Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!  Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) 

Read more less

Avoid off flavors in your dispensed beverages by cleaning your kegerator lines regularly. The included metal pump makes it easy to push the cleaning liquid through the draft lines.  This kit includes the following: 1 liter draft cleaning bottle 4" metal pump Single sided faucet/coupler brush Faucet wrench Note: This kit does not include the beer line cleaning detergent unless selected. Need additional Beer Line Cleaner? Warnings: Important information – Prop. 65 for CA residents. Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Read more less

This 4" long stainless steel shank assembly has a 1/4" bore and is commonly used when converting a refrigerator to a kegerator.  The following is included in the assembly: 4" 304 stainless steel shank with 1/4" bore Locking ring Sleeve Coupling nut Lock nut Choice of either a black plastic flange or stainless steel flange  

Read more less

Chrome plated beer shank assembly Specifications: Chrome plated brass shank 4-1/8" length 1/4" bore plastic flange Does not include hose tailpiece Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Read more less

Plastic washers that will fit most brands of gas regulators.  Inserts between the Co2 cylinder and regulator.

Read more less

Sankey coupler bottom seal also known as a skirt washer. Specifications: Type: Seal O.D.: 1-9/16" I.D.: 1-3/16"

Read more less

Swivel nut and barb for connecting 1/8" ID tubing to a 1/4" flare fitting. Barb Specifications: Material: Stainless Steel Size: 3/16" OD Nut Specifications: Material: Brass Finish: Chrome Plated Brass Size: 1/4" Flare

Read more less

The Duotight In-Line regulator works with both gas and liquid. The flow can easily be adjusted with the yellow adjustment knob. 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing. Features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The gauge is removable and can be swapped out with a gauge of a different pressure range.Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-60 psi Made with quality EPDM seals Wall mountable

Read more less

This ball lock to hex nut beer draft beer line assembly will connect a corny keg liquid post to a faucet shank. Includes: 5' of 3/16 ID clear vinyl draft tubing 1 x CMB liquid out corny keg connector, 1/4 mfl 1 x 1/4" swivel stem (stainless steel) with nut (chrome plated) 1 x 304 stainless steel tailpiece 1 x hex nut (chrome plated brass) 1 x hex nut washer 2 x 13.3 stepless oetiker clamp

Read more less

8 gram non-threaded CO2 cartridge, pack of 10. These will work in a uKeg growler. Each cartridge is 2 1/2" long and 11/16" in diameter.

Read more less