Best Selling Products

All pumps are not equal! The Spike Brewing engineers tested over 15 pumps during the development of this project and found almost all small submersible pumps on the market are grossly overrated. This can greatly affect your temperature control as flow rate is directly proportional to cooling efficiency.   To use: Simply plug our pump into our temp controller Connect your insulated lines to your temp control coil and to the pump outlet Submerse the pump in your cooler (with ice), fridge with cold water reservoir or glycol chiller Start cooling your wort! Specifications: High flow submersible pump 3/8" barbed outlet (connect directly to our insulated tubing) 12v DC powered (much safer than AC submersible pumps) Suction cups to keep pump submerged Detailed TC-100 product guide:Product Guide.pdf

Read more less

A multi-purpose strain with a very neutral sensory impact, suitable for most wine style but especially white, blush and sparkling wines. This fast fermenting yeast is highly robust, tolerating difficult fermentation conditions and alcohol levels up to 18% ABV. Suitable for Cabernet Sauvignon, Chardonnay, Vegetable wine and more. Alcohol Tolerance: 18% ABV Usage Directions: No rehydration required - add direct to grape must and stir well. For best results, ferment at 14 - 32°C (57 - 90°F). Storage Recommendations: Store in a cool, dry place. 8g Sachet

Read more less

The BrewBelt is an adjustable heating belt that wraps around a 7-8 gallon plastic pail or a 6 gallon single-stage plastic fermenter. It will maintain 6 U.S. gallons of fermenting beverage at a constant brewing temperature, approximately 75-80 degrees Fahrenheit for a period of up to 8 days. 120 VAC, 20 Watts Warnings: Do Not use this product on glass carboys or demijohns, metal, or wooden fermenters. Do Not use the belt if the room temperature rises above 75-80 degrees Fahrenheit. Do Not cover the belt with a blanket or any other covering.  This may cause the belt to overheat. Do Not stretch or twist the belt to prevent slack on the pail. This may rupture the internal heating element. Do Not store flammable objects near the belt while in use. Do Not leave the belt plugged in for more than 8 consecutive days or until the S.G. (specific gravity) drops below 1.010, whichever comes first.   

Read more less

304 Stainless steel ball lock liquid (beverage out) side connector with 1/4" barb connection.

Read more less

BevBright Cartridge Filters are an inexpensive, easy to use, and effective filtration media.  The 3 micron cartridge is the most popular and most recommended filter. It offers a great balance between the high capacity of the 5 micron and the ultra-clear polish of the 1 micron. The dual zone construction helps the 3 micron cartridge remove larger sediment without clogging prematurely and still effectively removes yeast and fine particulates from solution. 98% Super High Efficiency cartridge. Removes 98% of the material 1 micron or larger in a single pass.

Read more less

BevBright Cartridge Filters are an inexpensive, easy to use, and effective filtration media. Use the 1 micron filter as a final, ultra-clear polish only when your product is already very well settled. Excessive yeast or sediment in solution will quickly clog up the 1 micron cartridge. Product that is cloudy in appearance from anything other than a protein haze should be run through a 3 or even 5 micron prior to 1 micron filtering. 98% Super High Efficiency cartridge. Removes 98% of the material 1 micron or larger in a single pass.

Read more less

Use with a hanger bolt to attach to a wooden tap handle. This ferrule has 5/16” top threads and 3/8” bottom threads.  

Read more less

Cap any 4” port with this stainless steel cap. Specifications: 4" TC 304SS

Read more less

Convert a commercial sanke keg to be used with ball lock fittings. To install, remove the keg spear, place the gasket on the keg ferrule with the beaded side facing up, attach the silicone dip tube and place the tapping head on the ferrule, then secure with the 2" tri-clamp. **Be sure to always depressurize the keg before removing the tapping head.** Includes: Ball Lock Post Lid 2" tri-clamp Single-side beaded tri-clamp gasket 60 cm silicone dip tube (23.6") Red 2.5 bar PRV (36 psi)

Read more less

Built to transform steam into liquid during the boil, Spike Brewing's steam condenser lid will enable you to brew inside without worrying about moisture collecting on your walls and ceiling, which can cause mold issues. These lids are not only designed to fit Spike kettles, but will also work with most other kettle brands on the market. From a better boil-off rate to major cost savings and conveniences, you will find many benefits by adding this to your brew setup. Features & Specs: Compared to boiling without a lid, the Steam Condenser Lid has a 50% reduced boil-off rate and results in a ~6% total boil-off. Replaces the need to install a hood for indoor brewing Prevents mold from forming on walls and ceiling Third-party lab tested to show that DMS is completely undetectable (under 25 ppb) after only 30-45 minutes of boiling Discharge water is very hot and can be used for cleaning Compatible with Spike Kettles and the Spike Solo 1.5" tri-clamp port for CIP ball 4" tri-clamp port for hop additions Water usage: 15 gallons/hour for 10g, 15g & 20g lids 25 gallons/hour for 30g &. 50g lids Lid, pump, condenser mister, piping, clamps, gaskets, barbs & caps included with purchase For more information, see Spike Brewing's FAQ. To get started using the lid, see our Steam Condenser Lid Product and Process guides. Note: Limited inventory availability in-store.  Sizes not carried in-store will be drop shipped from the vendor.

Read more less

1/2" MPT stainless steel solid plug. Uses a 7/8" wrench.

Read more less

With this capping bell, you can adapt your Colt Strong capper to be compatible with European style bottles that require a 29mm cap Capper not included.

Read more less

Spike Brewing's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with their full port valves which have a 5/8" flow diameter; no flow restriction. Spike Brewing's proprietary fittings uses quick connect technology. The quick connect fitting simply hand screws into the kettle and the pickup tube easily pushes in/pulls out; no tools needed. Features: One size fits all kettles  Large 5/8" diameter 304 stainless tube  Simply push in for seal; no tools required Proprietary stainless push to connect fitting included Sized to pick up from the bottom edge of the kettle Made in the USA

Read more less

FLEX FERMENTER Introducing the new Spike FLEX! The FLEX was designed to be the most versatile, upgradable and longest lasting small batch fermenter on the market. With currently over 20 accessories (and counting) you'll never run out of fun toys to bling your FLEX out with. You can use the FLEX as a simple bucket fermenter with an airlock or add some accessories to get you all the way up to a 15 psi capable brite tank and anywhere in between!All hardware shown HERE is included! Flex Features: 304 stainless steel; 1.2mm (18ga) All sanitary welded ports (no-weldless fittings) Designed for 2.5 to 6 gallon batches 7 gallon total capacity 2 psi working pressure Strong seal to keep oxygen and bacteria out Use for pressure transfers to your keg or bottling bucket Etched volume markings Fully polished finish Dimensions: 15" wide by 21¨ tall (to top of airlock) See additional dimensions here Lid Features: 4" TC modular top port Allows for hop additions, temp control coil, top sight glass, etc Airlock port Body Features: 1.5" TC racking port with rotatable racking arm 1.5" TC secondary port for thermometer, sample valve, etc Limited availability in store.  Drop ships from vendor.

Read more less

10 GALLON STAINLESS BREW KETTLE - V4 Spike Brewing has once again re-designed their brew kettle.  They make one of the best brewing kettles available on the market.  It is the thickest kettle on the market, with US welded fittings (no more weldless fittings) at a factory direct price. Kettle Features: 2.5 - 6 gallon batch size 304 (18/8) stainless steel  Sanitary welded coupler design (done at our facility in Milwaukee, WI) 1.2mm thick walls (thickest on the market) 5mm tri-clad bottom (induction capable) Internal volume markings Polished finish 13.8¨ wide by 17.0¨ tall Domed bottom design Bottom coupler 1.5" off the bottom (1 gallon mark) Top coupler 6" off the bottom (4 gallon mark) Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store.  Drop ships from vendor.

Read more less

This copper counterflow chiller is probably one of the fastest ways to chill wort.  It can be more effectively flushed out after use in comparison to a plate chiller that has small crevasses to trap hop material.   These chillers are 9" in diameter and about 7" high. The input and output are approximately 3/8" outside diameter (10mm). These can be used with gravity, although a pump is recommended.

Read more less

For those of you who brew in cooler climates, the Graincoat is the perfect product for you.This heat insulation jacket is designed to be used with the Grainfather to keep heat contained in the boiler and maintain a constant temperature during your brew.Material - SBR Foam (0.27" thickness)Easy to wipe clean, polyurethane outer layer and machine washable.

Read more less

Chrome plated beer shank assembly Specifications: Chrome plated brass shank 5 1/8" length 1/4" bore plastic flange Does not include hose tailpiece Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Read more less

This manifold allows you to serve four beers at the same pressure. It’s made from brass and features a pressure relief valve, shut offs with check valves, 3/8” inlet and outlet barbs, and a 304 stainless mounting bracket.

Read more less

Flush and fill your bottles with ease. The valve has three positions: off, beer, and gas. Insert filler into the bottle in the off position, switch to gas to flush the bottle with CO2, and then switch to beer to fill your bottle. You can control the speed of your flow with the adjustable pressure relief. This filler is designed for use with 12 oz. bottles but can be used with larger formats by attaching a small piece of 1/4" tubing to the filler.

Read more less

The Hop Spider keeps hops together during the boil, and can be used on all appropriate sized boil pots, including the Grainfather.Made with a coarser, 800 micron mesh, for maximum wort flow and increased hop utilization.Designed with a specifically fitted hook design which can be hooked onto the side of any brew pot or the Grainfather system support ring. Perfect for those of you who would like the reassurance of a hop spider when brewing.This spider can be used for any kind of hops, including hop pellets. Specifications: Diameter: 5.9" Length: 11.8" Material: 800 micron 304 grade stainless steel mesh, with stainless steel support band and single hook.

Read more less

Fast, clean, easy to use. Contains one replacement cartridge for EZ Filter System or EZ Inline Filter, specifically designed for the maximum purification of alcohol or water.The cartridge eliminates the need to handle powdered or granulated carbon. The cartridge's porous design allows the spirit or water to pass through and the unwanted flavours or chemicals to be absorbed by the activated carbon. It is fast, clean and easy to use. Each cartridge is suitable for one batch of alcohol from a 25L still or 300L of water.

Read more less

Each carbon cartridge is suitable to filter up to 1125mls (40oz) of distilled spirit or grain alcohol. Discard old cartridge after each use.For Use in Still Spirits Air Still.

Read more less

Beer Stix for Carboys, Demi-John's, and Kegs.Pack of Two.Beer Stix Carboy sticks are sized so that one stick is the dosage for 5-6 gallons of beer. Due to careful aging and seasoning of the wood, as well as precise toasting delivers very specific flavors and aromas. The Beer Stix milling gives 60% more surface area compared to Wine Stix allowing faster extraction due to more short grain. The milling is 1/16 thinner for a denser toasting.Please allow 2 months minimum extraction time to balance the extractions of short and long grain. Removal of the wood early only allows certain extractions of flavors and primarily from the short grain in the Beer Stix milling. The end result is in likeness to a second use Barrel.French Medium Plus Toast imparts: Roasted Toasty Aromas Coffee Caramel Sweetness Length on the Palate

Read more less

A 1.5" Tri-Clamp to 1" barb fitting.304 Stainless Steel

Read more less

90° stainless steel elbow, 1/2" fpt x 1/2" fpt  

Read more less

This 1/2 in. mpt X 3/8 in. Barb Elbow is made from corrosion-resistant 304 Stainless steel.

Read more less

1/2" MPT stainless steel hollow plug.

Read more less

Discover the pleasures of making and drinking cider. From choosing the right apples through reaping the liquid rewards of a successful pressing, this classic guide has you covered. With detailed drawings of cider-making equipment, methods, and set-up, even a novice juicer will enjoy sweet and spicy gallons in no time. Annie Proulx and Lew Nichols provide insightful, time-tested advice enlivened by a smattering of historical anecdotes. Whether you like your cider sweet or hard, you’re sure to find a recipe that satisfies.  220 pages.

Read more less

Gnome is a mellow Root Beer with a big, round flavor. Totally subdued when compared with Zatarains. It has a lot of followers including us. The recipe included on the back of the 4 oz packs is for a 2.5 gallon batch using 1 to 2 oz per batch.4 oz package makes 5 to 10 gallons of rootbeer.

Read more less