Best Selling Products
G02 Kaiser - Imperial Yeast
Traditional Alt yeast strain however, this German ale strain can do just about anything. Kaiser is ready to produce an array of German-style beers. It will keep the beer clean and allow the delicate malt flavors and aromas to shine through. Characteristics of this strain make it a good choice for traditional Berliner Weisse fermentations. Kaiser is a low flocking strain, so expect long clarification times, but very low diacetyl levels. Specifications: Temperature Range: 56–65F (13–18C) Flocculation: Low Attenuation: 73-77% Alcohol Tolerance: 10% We ship all liquid yeast with an ice pack and insulated bubble envelope. Beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.
$12.99
Filter Pad - Rough
For use with an in-line plate filter. These pads will provide between 5-7 Micron filtration.Each filter pad set is good for approximately 5 gallons of beer. These pads are not designed to be back flushed and reused and should be used in one session.
$6.99
Fermtech Single Blast Washer
Automatic operation - press to rinse, lift to stop. Easy on plumbing - eliminates water-hammer damage. Durable enough for commercial use. Use nozzle to rinse siphons and filters. Hot or cold waterUses GHT (Inner attachment of 15/16". Outer diameter of 1 1/16". Pitch of 11.5 TPI2.2 mm.).
$12.99
Duotight 9.5 mm (3/8 in.) Tee
This Duotight tee fitting is compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$3.70
Drip Tray - 6" x 6" Wall Mount
6" x 6" brushed stainless steel wall mount drip tray (without drain). Details: Stainless steel door mount drip tray with bold brushed finish. Robust 18 gauge Stainless Steel construction. Three keyholes on backsplash plate for easy mounting. Removal grill for easy cleaning. Finished smooth for safety and appearance with welded corners. Specifications: 304 Stainless Steel Brushed Finish Length: 6" Width: 6" Depth: 3/4" Back-Splash: 2.7" Thickness: 18 gauge No Drain Product Sheet
$21.99
Diffusion Stone, 0.5 Micron
Ideal for carbonating your beer or adding oxygen to your fermenter, 1/4" OD barb. Made from 316 stainless steel, 1/2" diameter, stone is 1" in length.
$14.95
Mangrove Jack's Wine Yeast - CR51
A strain suitable for red wines, especially those intended to be light, fresh, and fruity. This moderate fermenting strain produces soft, velvety-smooth wines, with the aromatic enhancement of red berry fruits notes. Suitable for Pinot Noir, Gamay and more. Alcohol Tolerance: 14% ABV Usage Directions: No rehydration required - add direct to grape must and stir well. For best results, ferment at 16 - 24°C (61 - 75°F). Storage Recommendations: Store in a cool, dry place. 8g Sachet
$2.50
Camlock Type C
Type C camlock disconnect fitting. Female camlock with 1/2" Barb (13mm). 304 Stainless steel construction. 150 psi working pressure.
$14.50
Bushing, 1/2''FPT x 3/4''MPT, S/S
3/4" MPT x 1/2" FPT Bushing304 Stainless SteelÂ
$3.95
Blue Bottle Wax Beads, 1 lb
1 pound package of blue color bottle wax beads. Bottle Wax Beads help you achieve a tough, moisture-resistant coating that preserves freshness, flavor and fragrance in your wines, or beers, with these blends of FDA approved waxes. You can dip the bottle in the wax for a more rustic look, or use a small measuring cup or spoon if you want the wax in a specific location.1 LB of beads is good for approximately 65 bottles. To use: Make sure that bottle and cork are clean and dry. Melt wax in a suitable container, maintain a temperature between 160-170F. Dip bottle top in wax for 10-15 seconds then pull straight up, keeping inverted. When the excess wax run-off stops, turn bottle upright. Warning: Do not drip wax on your hand, it may burn you. Heating wax to a temperature over 450F could result in combustion. Never pour water on a wax fire (fire will spread). Use a fire extinguisher or cover with a metal lid.
$17.99
3" Chrome Plated Beer Shank Assembly
Chrome plated beer shank assembly Specifications: Chrome plated brass shank 3-1/8" length 1/4" bore plastic flange Does not include hose tailpiece Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
$19.99
4" TC Clamp
A standard clamp for all of Spike Brewing's 4" TC ports Specifications: 4" TC 304SS
$15.00
3/4" Male ght and 1/2" fpt
This brass fitting has 3/4" male garden hose thread on one side and both 3/4" mpt and 1/2" fpt on the other.
$3.95
3/16” x 5/16” Splicer, Stainless
Splice together 3/16" ID and 5/16" ID tubing with this 303 stainless steel hose splicer.
$3.74
#10 Dual Hole Silicone Stopper
#10 tapered silicone stopper with two holes. This silicone stopper fits plastic (PET) carboys and has two drilled holes to accomodate racking canes, thermowells, and airlocks. One hole is 3/8" that will fit an airlock and the other hole is 1/4" that will fit a racking cane or thermowell. You may need some lubricant to aid a racking cane or thermowell through the hole.
$5.50
Evergreen™ Hop Pellets
Breeding/Development: After multiple rounds of brewing trials at the Rahr Technical Center, it was added to the BSG Hop Solutions portfolio in 2021. Sensory: Evergreen™ announces its presence with strong suggestions of fresh peach and apricot, bright citrus (lemon candy, orange zest, tangerine), and watermelon candy. Green notes of fresh hay and pine needles round out a classic American craft beer hop profile. Secondary and tertiary notes include menthol, dank, geranium, herbs (basil, dill, thyme), cannabis, and green tea. Brewing Application: Aroma, whirlpool, and dry-hop additions during or after fermentation. Ideal for strongly hoppy craft lager styles like IPL, but also at home in west coast IPA, pale ale, American black ale, and barley wine. Specifications: Alpha Acid Range %: 7.0-7.5% Beta Acid Range%: 4.3-4.5% Co-Humulone as % of Alpha: n/a Total Oil mL/100 g: 1.2
$1.60 - $7.99
Duotight Mini Gauge 0-15 psi
This mini pressure gauge is compatible with the BlowTie 2 spunding valve, Duotight in-line regulator, and KegLand mini regulator. It is recommend using the gauge with a range closest to your desired pressure setting. Pressure Range: 0-15 psi (0-1 bar) Body Dimensions: 26mm x 26mm x 15mm Probe Diameter: 8mm
$7.70
1.5" TC Sight Glass
The Spike Brewing engineers have totally redesigned the 1.5" TC sight glass from the ground up! Standard sight glasses use 4 long bolts that need to be tightened in a criss-cross pattern to get even pressure to avoid leaks. Their new design is made up of only 5 parts compared to 26 parts in a standard sight glass. No tools are required to assemble or disassemble; simply twist the knurled end cap off. The glass is also protected by the stainless guard which protects the glass from even the clumsiest brewer. The sight glass allows for direct attachment to the bottom port of our conicals. The sight glass allows for monitoring flow, color and clarity. A sight glass is also helpful when collecting yeast. Specifications: 1.5" TC 304 stainless steel Extra thick Pyrex glass 5” long 25% lighter than previous design **A 1.5" gasket and clamp will need to be purchased separately if you do not already have spares**
$65.00
Soda Ash
Soda Ash, also known as sodium carbonate (Na2CO3), is the sodium salt of carbonic acid (soluble in water). It is primarily used to remove tartrates in wine barrels. Use two ounces of soda ash for each three gallons of water. Fill the barrel half full with water as hot as you can get it. Then add the soda ash that has previously been dissolved in a little hot water. Shake or roll the barrel until the solution is well mixed. Now finish filling with water as hot as you can get it. Bung the barrel tight and roll it around to agitate it. Roll the barrel several times during a 12-hour period. Then empty it and rinse several times until all the solution has been washed out. 5 pound bag
$13.99
Duotight 9.5 mm (3/8 in.) x 1/2 in. Bulkhead
This Duotight Bulkhead is the same one used for installing the Temp Twister cooling coil into the lid of the FermZilla. Allows you to add a bulkhead to just about anything that can then be connected to with EVABarrier 9.5 mm OD Tubing or 3/8" OD stainless or copper tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$6.60
Blow-Off Cane
This USA made blow off cane is designed to attach to the 1.5" TC on the lid of the Spike Brewing conicals. Options:Standard: For use as a standard blow off into sanitizer 1.5" TC End: Use for a blow off into sanitzer with a barb (HERE) and/or attach the Spike Brewing pressure manifold (HERE). Specifications: 1.5" TC 304SS 15” total drop Works with every size conical Made in the USA
$45.00 - $65.00
Gas Manifold Bundle
Spike Brewing's specially designed CO2 gas manifold is designed to attach directly to the 1.5" TC port on your fermenter's lid. This manifold allows you to easily add pressure for transfers, stuck yeast dumps, purging oxygen, carbonating, etc. The manifold has 3 ports for a pressure gauge, pressure relief valve and a ball lock gas post. One part, three functions, easy assembly, easy cleaning; what more could you ask for!? Gas Manifold Bundle: Gas Manifold Pressure Gauge (Link) PRV (Link) Gas Post (Link) **Always use a 15psi pressure relief valve when pressurizing a tank**
$85.00
Conical Heater
Unfortunately some of us will have to heat our conicals during the long Winter months. No fear, Spike Brewing has the solution! Each conical has its own sized heater and the wattage of each is carefully designed to match it. They also use a built in thermostat which stops the heater from getting too warm. This means you get a gentle warming action when your beer drops below your desired temp (opposed to rapid heating which can overshoot or 'cook' your beer). This heater attaches to Spike Brewing's insulated conical jacket via Velcro. It rests on the bottom cone section of the conical where the coldest liquid is. This will give the most even temperature throughout your fermenter (happy yeast!). Specifications: Different wattages for each fermenter (ranging from 80w to 150w) Built in 90F thermostat to prevent the heater from overheating your wort 5' long cord Detailed TC-100 product guide:Product Guide.pdf Limited availability in store. Drop ships from vendor.
$100.00 - $130.00
Camlock Type B
Type B camlock disconnect fitting. Female camlock with 1/2" Male Pipe Thread (MPT). 304 Stainless steel construction. 150 psi working pressure.
$15.50
1/4" Flare Fitting Tee
Stainless steel tee with 1/4" flare thread on all three ends.
$15.00
Mini Jet Filter Pads #2, Polish
Three pack of 2.5 micron filters for the Mini Jet.
$4.49
Mini Jet Filter Pads #1, Coarse
Three pack of 8 micron filter pads for the Mini Jet.
$4.49
Multihead Pellet Hops
Hop Type: Dual-PurposeOrigin: United StatesAlpha Acid: 3.0 - 6.0%Common Styles: Pale Ale, IPA Native to Colorado and New Mexico, humulus lupulus neomexicanus is an entirely different species from its European cousin, humulus lupulus. Notes of intense guava, melon, apricot and citrus fruit. Excellent as an aroma hop in IPAs, Pale Ales and anything that is looking for strong aromatics. All repacked house are nitrogen flushed to preserve freshness.
$1.10 - $9.95
Eureka! Pellet Hops
Complex in nature, Eureka is dank and resinous with fruity notes ranging all the way from tropical-citrus to dark stone fruit. Eureka rounds out blends and truly shines as a late hop addition. A variety for the "classic hop head," Eureka is one you won’t want to miss! Specifications: Aroma Specification: black currant, dark fruits, strong herbal notes, pine tree Alpha-Acid %: 17-19% Beta-Acid %: 4.5-6% Total Oils (ml/100g): 2.5-4.4 All hops are nitrogen flushed to preserve freshness.
$1.90 - $17.35
3/16” x 3/8” Splicer, Stainless
Splice together 3/16" ID and 3/8" ID tubing with this 303 stainless steel hose splicer.
$3.99
Co2 Gas Regulator Y Fitting, Chrome Plated Brass
Co2 gas regulator wye fitting for adding an additional shutoff. Specifications Material: Brass Finish: Chrome Plated Brass Thread Size: 1/4MPT x 1/4 FPT x 1/4 FPT Warnings / Instructions Important information: Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
$7.99
Regulation Cone for Stout Faucet Spout
Replacement regulation cone for stout faucet spout. Stout Faucet Diagram
$2.50
Stainless Steel Faucet Lever
304 stainless faucet lever replacement for most standard U.S. draft faucets.
$11.99
Oxygen Regulator Connection Kit
Using compressed oxygen is one of the best ways to aerate wort. It's quick, easy, and limits the risk of contamination. Attach this kit to your disposable oxygen tank and your choice of airstone. Includes: Adjustable Brass Oxygen Regulator Sanitary Inline Oxygen Filter Tubing You will need to obtain a disposable oxygen cylinder found at most local hardware stores.
$45.00
Colt Strong Bench Capper
Colt Strong Bench Capper Easy to adjust height for different size bottles Reinforced base and steel column Reinforced plastic head and metal piston Full cup 26mm steel capping head Made in Italy
$66.00
pH Calibration Buffer Solution 7.01 230 mL
PH Calibration Buffer Solution 7.01220mL
$16.70
