Best Selling Products
Hex Head Screw, 2 pack
18-8 Stainless Steel Hex Head ScrewM6 x 1 mm thread, 20 mm long Fits into the Maltmuncher grain mill to connect the plastic base. 2 roller mill requires 2 screws 3 roller mill requires 4 screws
$1.95
Duotight 9.5 mm (3/8 in.) Ball Valve
This Duotight ball valve can be used as an inline shut off valve on beverage lines. Compatible with EVABarrier 9.5 mm OD tubing.Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$5.00
Duotight - 8 mm (5/16 in.) Joiner
This Duotight joiner fitting is compatible with EVABarrier 8 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$2.80
Coupler Body O-Ring, Perlick
Replacement body o-ring for Perlick couplers.
$0.75
Copper Alembic Dome Pot Still Top
A component of the Still Spirits Alchemist Series, Copper Alembic Dome Top fits onto your T500 Boiler. This can be used in place of the T500 Boiler's stainless steel lid. The large copper surface area of this dome top acts as a catalyst with the vapor in the still and helps enhance and concentrate the flavors and aromas as well as remove unwanted sulfur compounds. This produces a smoother, richer, sweeter tasting spirit. Condenser and boiler sold separately.
$199.99
CO2 Inlet Nipple, LH
CO2 inlet nipple with o-ring tank seal, left hand threads
$9.99
BevBright Beverage Filter, 5 Micron
BevBright Cartridge Filters are an inexpensive, easy to use, and effective filtration media. Use the 5 micron filter when you have visible particulates in their beer or wine, or are going to be drawing out of a vessel with a lot of sediment in the bottom. The 5 micron cartridge will remove almost all of the visible imperfections and the majority of any yeast left in suspension, all while being the least likely to clog up mid-filtration. For well settled starting products that just need a final clean-up, it is recommended to use a 3 or 1 micron filtration instead. 98% Super High Efficiency cartridge. Removes 98% of the material 1 micron or larger in a single pass.
$8.00
Ball Lock Disconnect (Gas) with Built-in Check Valve, CM Becker
Plastic ball lock gas in coupler with 1/4" MFL. Quick disconnect for ball lock Cornelius (Corny)-type kegs. This disconnect has an internal check valve that will allow the gas to flow out, but won’t allow backflow of liquid back into your system. Internal Check Valve protects your system from liquid back flow! Made in Germany and assembled in the USA by CMB. Extremely high quality for years of service. NSF Approved for Food Grade Service!
$14.99
ForgeFit® Stainless Tri-Clamp Barb - 3/4 in. x 1.5 in. T.C.
A 1.5" Tri-Clamp to 3/4" barb fitting.304 Stainless Steel
$18.99
1.5" TC x 5/8" OD 90° Barb
This elbow will connect to any 1.5" TC port. It features an oversized barb designed to use with 1/2" tubing. This creates a full port opening for unrestricted flow and a tight seal that requires no hose clamps. Specifications: 1.5" TC 304SS Oversized 90 degree barb for 1/2" tubing
$17.00
Dual Cleaning Flusher for D and S Couplers
This stainless steel dual line flush adapter will work with D and S style couplers. This saves time by making it possible to flush two beer line systems at the same time. The integrated ball lifter in the center of both flushing cups lifts the check ball in the probes to allow easy flushing. Assembly made from Stainless Steel.
$54.00
Camembert Cheese Mold
This open bottom Camembert cheese mold is for draining soft ripened cheeses such as Camembert and Petite Brie. The open bottom allows for proper whey drainage. It is best to use this mold with a draining mat underneath. Measurements: 4.25" W 4.25" H
$17.99
Duotight 8 mm (5/16 in.) Elbow
This Duotight elbow fitting is compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$2.80
Closed Pressure Transfer Kit
Introducing another cool accessory to compliment Spike Brewing CF series conicals. Their closed pressure transfer kit (CPT kit) will allow you to rack your beer from your conical to keg without exposing it to oxygen. This will help you avoid off-flavors that can be caused by oxygen coming in contact with your beer. The Spike Brewing CPT kit uses all stainless hardware and Ultra Barrier tubing which is antibacterial due to its silver lining. It is also BPA free and over-sized to promote a quick transfer from conical to keg. CPT Kit Includes: 1.5" TC to flare 1.5" TC clamp 1.5" TC gasket Flare to liquid ball lock Gas ball lock blow off The Spike Brewing gas manifold bundle can be seen HERE.**Always use a 15psi pressure relief valve when pressurizing a tank****
$77.00
1.5" TC Thermowell
Spike Brewing's thermowell features a 1/4" temp probe opening on the outside which is mounted to a 1.5" TC fitting. This allows it to attach directly to the sanitary TC fitting on the conical. It also allows for an optional digital temp sensor to be attached. The probe is completely sealed from the outside. Pro Tip:The thermowell can be packed with thermal grease to help temperature response times. Specs: 1.5" TC 304SS 4” long 0.250" ID
$30.00
Stainless Steel Ball Valve - 3 Piece
Spike Brewing's 1/2” stainless steel ball valve screws directly into our brew kettles, no need for an additional nipple to make the connection like competitors valves. This valve is dual sided with a male (which screws directly into your kettle) and a female end (which allows for a 1/2" barb or other 1/2" fitting). The 3 piece valve completely disassembles so a thorough cleaning is easy. Specifications: Made from 304 stainless steel 1/2" NPT male end screws directly into the kettle Full port 5/8” inner diameter
$30.00
Flex+
FLEX+ FERMENTER Introducing the new Spike FLEX+! The FLEX+ was designed to be the most versatile, upgradable and longest lasting small batch fermenter on the market. With currently over 20 accessories (and counting) you'll never run out of run toys to bling your FLEX out with. The FLEX+ is the big brother to the standard FLEX. Out of the box it features an upgraded tri-clamp racking arm, tri-clamp butterfly valve and upgraded high pressure lid and clamp that can handle up to 15 psi. The higher pressure rating allows for carbonating your beer in the same tank you fermenter in. Carbonate your beer in 24hrs opposed to 7 days!All hardware shown HERE is included! Flex Features: 304 stainless steel; 1.2mm (18ga) All sanitary welded ports (no-weldless fittings) Designed for 2.5 to 6 gallon batches 7 gallon total capacity 15 psi working pressure Use for pressure transfers Use as a brite tank Etched volume markings Fully polished finish Dimensions: 15" wide by 21¨ tall (to top of airlock) See additional dimensions here Lid Features: 4" TC modular top port Allows for hop additions, temp control coil, top sight glass, etc Three 1.5" TC ports which allow for: Blow Off Port – Dedicated port for an airlock or blow off tube Hop Port – Dedicated port for adding hops PRV Port – Dedicated port for your pressure relief valve (PRV) Stainless band clamp for attaching the lid Completely removable lid for easy cleaning Body Features: 1.5" TC racking port with rotatable racking arm 1.5" TC secondary port for thermometer, sample valve, etc Limited availability in store. Drop ships from vendor.
$450.00
Drip Tray - 14" Wall Mount
14" x 6" brushed stainless steel wall mount drip tray (without drain). Details 304 Stainless steel door mount drip tray with bold brushed finish. Robust 18 gauge Stainless Steel construction. Removal grill for easy cleaning. Finished smooth for safety and appearance with welded corners. Specifications: 304 Stainless Steel Brushed Finish Length: 14" Width: 6" Thickness: 18 guage Back-Splash: 2.7" No Drain Product Sheet
$39.99
Chemical Resistant Gloves
Made from chemical resistant PVC, these gloves will protect your skin from harsh cleaners and sanitizers. Length is 21.5 inches.
$11.99
Glass Wine Thief with Bend
This 60 cm (23.6") long curved glass wine thief if perfect for taking samples of wine from a barrel or carboy for testing. The curve makes it easier to extract samples if your barrel or carboy happens to be in a tight space. Made in France.
$34.99
18.5mm Stepless Oetiker Clamp
Stepless Oetiker Clamp, Size 18.5 for 5/8" OD tubing
$0.60 - $11.00
OxyWand with 0.5 Micron Stone
The OxyWand is a 24" long stainless steel 1/4" tube with a flared end that will connect directly to flared oxygen stones. This makes it easy to remove the stone to boil it. The .5 micron stone works great with compressed oxygen cylinders and the 24" wand allows for use in carboys, conicals, and more. The .5 micron stone will not work with an aeration pump.
$30.00
28mm Plastic Screw Caps/ 25pk.
White screw cap lid for 500ml or 1L amber PET bottles. Pack of 25
$4.49
Green Matte PVC Capsule
PVC ("polyvinyl chloride", a common plastic) capsules shrink under the application of heat, providing an easy but elegant bottle dressing. The Green Matte capsule is an attractive, flat forest green covering with no print and a gold foil top. Includes a pull-tab for easy removal. 30 Pack.
$3.95
Female Stainless Steel Quick Disconnect w/ MPT
Female Stainless Steel Quick Disconnect with 1/2" Male Pipe Thread When used with the male quick disconnect, these quick disconnect seal up very well in either flow direction, without a lot of work in connecting them. It features a 1/2" Male National Pipe Thread on the end for easy connectivity to almost anything.The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60 psi or less. Gasket temperature range is -40° to 250° F. Open port, does not have shut-off. Please Note: This product will NOT work with Brass or Plastic Quick Disconnects.
$14.99
1.5'' Tri-Clamp Ferrule, Stainless Steel
1.5" Tri-Clamp Ferrule304 Stainless Steel1-13/32" ID1-3/32" Length
$8.95
LalBrew® House Ale
LalBrew® House Ale is a next-generation performance yeast strain that is extremely fast and incredibly clean, making it the perfect versatile house strain to meet your brewing needs.Selected by our partner Escarpment Labs (ON, Canada) for its superior fermentation performance, this strain allows brewers to achieve greater efficiency with faster fermentations, shorter maturations, high stress tolerance, excellent repitchability, and quick cleanup of off-flavors like acetaldehyde and diacetyl.LalBrew® House Ale is suitable for a wide range of beer styles, including IPAs, Blond Ales, and Stouts, due to its neutral fermentation profile. Faster fermentations – to save time and space. Shorter maturation times – accelerated clean-up of diacetyl and acetaldehyde. High stress tolerance – capable of handling difficult fermentations. Excellent repitchability – genetically stable and proven consistency in key brewing parameters. High FAN uptake – more stable final product. Neutral flavor profile – Versatile for a wide range of ales Strain Saccharomyces cerevisiae Beer styles American IPA Attenuation 78-86% Temperature range 16 - 22°C (61 - 72°F) Flocculation Medium Aroma Neutral Alcohol tolerance 14% ABV Pitching rate 50 - 100g/hL
$6.99
CellarScience® ALDC 1 oz. | Diacetyl Reducing Enzyme
Reduce Diacetyl production during fermentation or dry hopping with ALDC from CellarScience. ALDC, or alpha acetolactate decarboxylase, is a helpful enzyme that can be added at yeast pitching or along with your dry hops to limit the production of Diacetyl to protect your finished beer from off-flavors and reduce the conditioning time needed before its ready to bottle or keg. Commonly used to combat hop creep, the result of dry hops with trace amounts of sugar leading to additional fermentation activity, resulting in more Diacetyl production and requiring more conditioning time. Use:Available in 1 oz dropper bottle or 8 oz bettix bottle. Add to fermenter at time of yeast pitching or dry hopping at a rate of 1 dropper full per 5 gallons or 3 mL per bbl. 1 oz contains approximately 35 doses for 5-gallon batches, or enough to treat approximately 10 bbls. Additional Notes:Although commonly added to heavily dry hopped beers, using ALDC during fermentation can benefit any beer style by reducing Diacetyl production. Brewing hops all contain the naturally occurring enzyme AMG or amyloglucosidase which breaks down long chain sugars into simple sugars that yeast can ferment. The reason hop creep is a relatively new phenomenon is due to the changing ways in which hops are dried and processed. As brewers started to demand more aromatics from their hops, growers began to lower the kilning temperatures to preserve volatile oils. This led to higher levels of AMG left on the hops as well, where they were previously denatured at the higher kilning temperatures. With more AMG present on the hops, dry hopping now leads to more fermentation activity and higher levels of Diacetyl produced after the primary fermentation is complete. Although the simplest remedy to hop creep is time—waiting for the yeast to naturally clean up the extra Diacetyl—ALDC is a great way to reduce conditioning time and the risk of off-flavors in your finished beer. The recommended shelf life is 12 months from the date the package is opened.
$29.99
Gochugaru Chile Flakes
Gochugaru chiles are a crushed Korean chile pepper that has a fruity and lightly smoky flavor. They are a mild chile pepper, approximately 2,000 - 8,000 heat units on the Scoville scale, and the seeds have been removed. Gochugaru chile flakes can be used in place of other crushed red peppers, and are traditionally used in a variety of Korean dishes such as kimchi, kimchi-jjigae, and kkotgetang.
$3.99 - $9.99
COPPER WORT CHILLER - 25 FT W/ VINYL TUBING
INCLUDES: 2 - 4' LENGTHS OF CLEAR VYNL TUBING 3/4" HEAVY DUTY FEMALE SWIVEL GARDEN HOSE FITTING (USA) 3 - STAINLESS STEEL HOSE CLAMPS CHILLER DIMENSIONS: 6.5" COIL DIAMETER 5.75" COIL HEIGHT 13.75" INLET/OUTLET HEIGHT
$99.99
5/16'' Barbed Co2 Line Tee, Stainless Steel
Stainless steel barbed tee commonly used to splice/split Co2 draft hose. Specifications 304 Stainless Steel 5/16" ID Barbs T Fitting Splices Together 5/16" I.D. Vinyl to 5/16" I.D. Vinyl 5/16" I.D. Vinyl to 3/8" I.D. Poly 3/8" I.D. Poly to 3/8" I.D. Poly
$8.99
Banneton Eddingtons Round Angled Basket Ø10x3"
Banneton baskets retain and absorb warmth, provide a consistent shape and texture, and ensure the formation of a healthy crust by controlling moisture conditions on the surface of the dough. Also great for use as bread baskets for serving bread and dinner rolls, these bannetons are made from 100% natural cane and are secured with stainless rust-free pins. Compatible with Round Decorative Basket liner and Proofing Liner 2 Pack
$26.99
Banneton Proving Basket Liner 2 Pack - Fits Angled 10.2x3.1”
This banneton proofing basket liner is made with durable and high-quality fabric that can easily be removed for cleaning or switching out. Linen fabric has many benefits. This fabric allows more airflow and controls moisture levels. It is also known as a stiff form of fabric so it is less likely for it to cling onto anything. The lining can be used as a cover to keep your bread fresh and have a lovely effect on its overall presentation! Pack of 2 Compatible with our 10" Round Basket
$7.99
Japanese White Koji - 20 ounces
This White Koji is formulated specifically for brewing beer with citric acid. Citric acid tends to have a less harsh astringency when compared to lactic acid. Used at a high percentage (20-25%), it makes a very clean kettle sour instantly. Rather than waiting overnight for the bacteria, you can hit your target pH during your standard mashing process. It can also be added to any recipe to adjust pH in the mash, similar to acidulated malt. This traditional ingredient, imported directly from Japan, is a great addition to your next craft Japanese rice lager! Koji (Aspergillus luchuensis) is a fungus that is grown on rice during the Shochu making process and citric acid is naturally generated. Koji is grown on rice which breaks down starch in the rice to a more fermentable sugar source. Yeast can then use these sugars during fermentation to add a bright and refreshing citric acid character. White Koji should be used at a rate of 20% - 25% of total grain in your recipe for souring. Use at a small percentage, as needed, for pH adjustment in the mash White Koji is an exciting new specialty ingredient formulated specifically for the brewing industry Instant kettle sour! No waiting for bacteria to do their thing. Just add directly to the mash to hit your target pH Citric acid is naturally produced by Aspergillus luchuensis, offering a clean pleasant acidity when compared to lactic acid The citric acid produced can be swapped for lactic acid in any application, such as sour beers or mash pH adjustments CellarScience imports this Koji fresh from Japan's best sake and koji producer Try using White Koji instead of acidulated malt in your next batch, especially nice in a Japanese rice lager! 20 ounce (566 gram) package
$7.99
French Oak Carboy Spiral Medium Plus Toast - 2 pack
Infusion Spirals are easy to use, time saving, economical, environmentally friendly, as well as being high-quality. French Oak: An ultra premium, fine grain oak void of sapwood, bark and knots and air-dried for 24 months. Available in light, medium, medium plus, and heavy toast levels, and multi-toast barrel packs (Bordeaux, Burgundy and Rhone Blend). Convection toasted for thorough and uniform results. Suggested Application: 1 stick per 3 gallons. Spirals may be snapped into smaller portions to achieve desired flavor intensity. The spiral shape achieves maximim accelerated extraction time. Place directly into wine, beer, or spirit. Oak flavor is fully extracted in 6 weeks. Withdraw sooner for milder taste. Toast: Medium Plus Dimensions: 1" x 8"
$18.49
White Bottle Wax Beads
White color bottle wax beads. Bottle Wax Beads help you achieve a tough, moisture-resistant coating that preserves freshness, flavor and fragrance in your wines, or beers, with these blends of FDA approved waxes. You can dip the bottle in the wax for a more rustic look, or use a small measuring cup or spoon if you want the wax in a specific location.1 LB of beads is good for approximately 65 bottles. To use: Make sure that bottle and cork are clean and dry. Melt wax in a suitable container, maintain a temperature between 160-170F. Dip bottle top in wax for 10-15 seconds then pull straight up, keeping inverted. When the excess wax run-off stops, turn bottle upright. Warning: Do not drip wax on your hand, it may burn you. Heating wax to a temperature over 450F could result in combustion. Never pour water on a wax fire (fire will spread). Use a fire extinguisher or cover with a metal lid.
$17.99 - $74.99
