Products
#9 Twin Top® Wine Cork
The Twin Top® is a technical cork stopper, based on the technology behind the production of the champagne cork stopper. It meets the winemakers' highest demands while retaining all the benefits of a natural cork stopper in terms of sustainability. The Twin Top® is comprised of an agglomerated body and a disc of natural cork at each end. It is ideal for fruity wines and recommended for wines not intended for long bottle ageing. It comprises an agglomerated body and a disc of natural cork at each end. The Twin Top® cork has shown an excellent performance in the cork comparative test developed by AWRI – Australian Wine Research Institute and in the permeability to oxygen analysis carried out by the University of Bordeaux 2. It can be used on the same bottling lines as natural cork stoppers and it is especially suited for high-speed bottling lines. Specifications: Form Factor: Straight Material: Natural Cork Composition: Agglomerated body, natural cork on ends Length: 44mm (1.75") Diameter: 23.5mm (0.925") Legacy Sizing: No. 9 x 1 3/4" Wine Storage Duration: Recommended for up to 6 years.Recommended Corker: We recommend using a floor or bench corker for this style of cork.
$12.99 - $30.99
#9.5 Rubber Stopper
#9.5 tapered rubber stopper. Top Diameter: 1 13/16" Bottom Diameter: 1 1/2" Length: 1" With a 3/8" drilled airlock hole in the center.
$2.89
'A' System "German Slider" Tap
This A System "German Slider" keg coupler is manufactured my Micro Matic, a leader in the beverage dispensing industry. The A system tap is commonly referred to as the "German Slider" because it slides onto the valve face. This makes for a quick and easy installation. The keg coupler connects to the keg valve, "tapping" the keg. Both the gas line from the CO2 tank/regulator and the beer hose to the beer faucet attach to the coupler. It is used by breweries such as Hoegaarden, Paulaner, Spaten, and Warsteiner. FEATURES Slide on keg connection 304-grade stainless steel probe for the ultimate in purity Short handle ideal for 1/6th barrel kegs and keg with a rubber chime Ergo lever handle Easy to engage: push down to tap/pull up to untap PRV (pressure relief valve) Fits A System keg valves Easy to use Excellent for beer, cocktails For home or commercial use
$95.99
'A' System with Chrome Plated Brass Body - Stainless Steel Probe
Best keg coupler for beer dispensing from S system kegs. Built for both commercial and home use. Align the coupler base with the keg valve and lock it in place by pulling the handle out and down. This A system keg tap coupler body is Brass with a Chrome layer while the Probe is of SS 304 grade. Durable coupler with an ergonomic lever style handle. A system keg couplers are also called German sliders. This is because they are used by popular German breweries and are slide-on style over the keg valve.See our different gas inlet thread sizes and with and without PRV options to pick the one for your needs. A system keg coupler is commonly referred to as the German slider. It is designed to fit many German beers such as Hacker-Pschorr, Hoegaarden, Paulaner, Pimms, Spaten, Warsteiner, and others. Always use the same coupler type as your keg. Durable Brass body with Stainless steel 304 probe – gives only SS contact with your beer. Pressure Relief valve included for safety. Releases overpressure gas at 56 – 65 PSI 5/8″ x 14 BSP threads for beer outlet. Slide on keg valve connection with sleek black handle.
$59.99
'U' Style Guinness Tap
This Guinness, "U Style" keg coupler is manufactured by Micro Matic, a leader in the beverage dispensing industry. It is most commonly used to tap Guinness beers but will usually fit Abby White, Boddingtons Pub Ale, Harp, Kilkenny, Leffe, Magners, and Smithwicks Ale. Features: Well-type connection Stainless steel probe Easy to engage handle: push down to tap/pull up to untap
$79.99
-5 to +5 Brix Hydrometer
A hydrometer that is utilized to measure the completion of a wine fermentation. Measures -5 to +5 brix scale.
$19.99
.1N - Acid Test Kit
A complete acid test kit, which includes: Standard Sodium Hydroxide Solution .1N Acid Indicator Solution (Phenolphthalein) Calibrated Syringe Test Tube Full Instructions Contains Hazardous Materials -- KEEP OUT OF REACH OF CHILDREN The formula used to calculate TA (titratable acidity) as g/L of tartaric acid is as follows: Titratable acidity (g/L tartaric acid) = (Vtitrant * Ntitrant *75)/ Vsample Where, Vtitrant: Volume of titrant in mLVsample: Volume of sample in mLNtitrant: Titrant concentration in normality75: Value based on various conversion factors (i.e. molecular weight, reaction ratio, etc.) Ships via ground transportation only.
$12.99
.1N - Sodium Hydroxide 4 fl oz
Sodium Hydroxide 4 fl oz (Certified 0.1 normal). Replacement sodium hydroxide for BSG branded acid test kit.
$4.99
0.95mm Stepless Hose Clamps - 1/4 in. OD Tubing
Stainless Steel, Stepless Oetiker Clamp This style of clamp tightens in an exact circle, making them ideal for use with draft lines. 0.95mm for 1/4" OD Tubing. (6-8mm OD) This clamp will fit our 8mm OD EVABarrier double wall draft tubing. Stepless Clamp Tool sold separately.
$0.60 - $11.00
1 Gallon Fermenting Jar Assembly
An one gallon glass fermenting jar with a grommeted plastic lid and a medium sized cylinder airlock.
$12.99
1 Gallon Glass Jar
A one gallon glass jar. Great for fermenting veggies or kombucha. Lids are sold separately. Options are metal, plastic, and plastic with grommet. This item is excluded from free shipping offers
$8.99 - $31.99
1 Gallon Glass Jug
A one gallon glass jug that is a great choice for your smaller ferments of beer, cider and wine. Closure options: #6.5 Stopper 38mm Drilled Screw Cap 38mm Metal Cap #15 tapered cork This item is excluded from free shipping offers
$9.99 - $34.99
1 Gallon Wide Mouth FerMonster (PET Carboy)
The 1 Gallon Wide Mouth FerMonster Carboy.With a wider 4" mouth, there is easier access for cleaning. It is made of heavy P.E.T. plastic. Comes with an O-ring and air-tight one piece lid with a hole that will take a #10 stopper (not included). There are no ribs, only smooth sides, so no yeast or sediment will adhere to walls during fermentation. Completely taste and odor-free. It is also stain resistant. Made from PET plastic which is far more resistant to oxygen than regular plastic. 100% made in Canada. Weighs 0.6 lbs Rated to 140 degrees F Height: 9.45 inches Diameter: 6.7 inches Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage!
$16.49
1 pound - Candi Syrup - D-240
D-240 Candi Syrup is the richest and darkest candi syrup available on the market. Created to have a rich smooth palate, D-240 is a triple-dark syrup with hints of dark raisin, extra dark stone fruit and a roasted dark caramel back-palate. For ales that require full body and indescribable flavor that will set your ales apart.Contents: Beet sugar, Date sugar, water.Specifications: SRM - 240º L, PPG - 1.0321 LB pouch
$6.99
1 pound - Simplicity Blonde Belgian Candi Syrup - 1 SRM
Simplicity is a blond candi syrup made in the USA that is ideal for all Belgian Blonde Ales, Saisons and Belgian Trippels.One pound of Simplicity will add an estimate SRM of .15L to 6 Gallons of wort. This is solely used for increasing the gravity and making a more fermentable wort by adding smaller chains of dissolved sugar.Contents: Beet sugar, water.Specifications: SRM - 1 Lovibond, PPG - 1.0321 LB pouch
$6.99
1" ID Clear Vinyl Tubing
Clear, flexible, and food-safe, this polyvinyl chloride (PVC) tubing is perfect for handling beverages and liquids. 1" ID clear vinyl tubing is ideal to be used in the creation of a blowoff tube for glass carboys. Material: PVC (polyvinyl chloride) ID: 1.000 (1") OD: 1.250 (1-1/4) Wall: .25 (1/4) Max. Pressure: 25 psi (at 70°F. Higher temperatures lower maximum working pressures.) Max Temperature: 150°F Prop 65 Warning: This product contains phthalates (DEHP, DBP, BBP), a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.
$2.60 - $99.99
1" Stir Bar
Replacement 1" stir bar.
$8.80
1'' X 4' Hose Brush
Brush for cleaning out tubing or hose. Great for 1"ID blow-off tubes. Specifications: Size: 1" Length: 4'
$7.99
1.5" EPDM Gasket
1.5 inch TC (tri-clamp) gasket made from FDA approved EPDM
$1.50
1.5" TC Butterfly Valve
This 1.5” TC butterfly valve can be used on Spike+ kettles. This valve has a squeeze locking/trigger handle that allows for 180 degrees of motion and 13 locking positions.The handle is a special 'shorty' style which keeps a compact design. This handle is made from extremely durable glass reinforced nylon which is much lighter than metal handles. Specifications: 1.5" TC 304SS metal components FDA silicone seals Light and durable fiber reinforced nylon handle Squeeze trigger with 13 locking positions
$65.00
1.5" TC Element - 240v
Spike Brewing 1.5" TC Ripple Element Specifications: 240 Volt, 5500 Watt Stainless Element Includes 1.5" TC Gasket and Clamp
$90.00
1.5" TC Sight Glass
The Spike Brewing engineers have totally redesigned the 1.5" TC sight glass from the ground up! Standard sight glasses use 4 long bolts that need to be tightened in a criss-cross pattern to get even pressure to avoid leaks. Their new design is made up of only 5 parts compared to 26 parts in a standard sight glass. No tools are required to assemble or disassemble; simply twist the knurled end cap off. The glass is also protected by the stainless guard which protects the glass from even the clumsiest brewer. The sight glass allows for direct attachment to the bottom port of our conicals. The sight glass allows for monitoring flow, color and clarity. A sight glass is also helpful when collecting yeast. Specifications: 1.5" TC 304 stainless steel Extra thick Pyrex glass 5” long 25% lighter than previous design **A 1.5" gasket and clamp will need to be purchased separately if you do not already have spares**
$65.00
1.5" TC Thermowell
Spike Brewing's thermowell features a 1/4" temp probe opening on the outside which is mounted to a 1.5" TC fitting. This allows it to attach directly to the sanitary TC fitting on the conical. It also allows for an optional digital temp sensor to be attached. The probe is completely sealed from the outside. Pro Tip:The thermowell can be packed with thermal grease to help temperature response times. Specs: 1.5" TC 304SS 4” long 0.250" ID
$30.00
1.5" TC Thermowell, 7"
Stainless steel tri-clamp (TC) thermowell. 1.5" TC Connection 7" Length
$29.95
1.5" TC to Air Hose Quick Disconnect - Used
Air hose adapters are used to convert Tri Clamp to the standard Industrial Style 1/4 " air line connector. Lightly used
$10.00
1.5" TC x 5/8" OD 90° Barb
This elbow will connect to any 1.5" TC port. It features an oversized barb designed to use with 1/2" tubing. This creates a full port opening for unrestricted flow and a tight seal that requires no hose clamps. Specifications: 1.5" TC 304SS Oversized 90 degree barb for 1/2" tubing
$17.00
1.5" TC x 5/8" OD Barb
Not all hose barbs are created equal! The Spike Brewing special 1.5" TC x barb fitting features a shorter profile and over sized diameter barb. The over sized barb (5/8" OD) is specially designed for 1/2" Silicone tubing. The larger size does two things: It stretches the tubing over the barb creating a tight fit requiring no hose clamps. The inside diameter of our barb is 1/2" compared to standard 1/2" barbs which have a smaller 3/8" size. This creates a full port design and will not restrict flow going through the barb. Specifications: 304SS 1.5" TC x 5/8" barb 1/2" ID
$14.00
1.5" TC x QC (Quick Connect)
Out of all the ways to attach silicone tubing to your brew kettle or conical, quick connect ball lock fittings are a great option. The ease of connecting/disconnecting and cleaning is unmatched by standard hose barbs or cam locks. These fittings can easily be attached using one hand even with heavy brewing gloves. The inside diameter of this quick connect fitting is 1/2". This creates a full port design and will not restrict flow going through the barb. Specifications: 304SS 1.5" TC x QC 1/2" ID
$17.00
1.5'' Tri-Clamp 90 Elbow, Stainless Steel
1.5" tri-clamp 90° elbow made of 304 stainless steel.
$27.50
1.5'' Tri-Clamp End Cap, Stainless Steel
A 1.5" end cap for capping an unused ferrule. Stainless Steel
$4.00
1.5'' Tri-Clamp Ferrule, Stainless Steel
1.5" Tri-Clamp Ferrule304 Stainless Steel1-13/32" ID1-3/32" Length
$8.95
1.5'' Tri-Clamp Gasket - Teflon
1.5" Tri-Clamp Teflon gasket.
$3.50
1.5'' Tri-Clamp Gasket with Mesh Screen
Teflon gasket with 304 stainless mesh screen for 1.5" tri-clamp connections. Can be used as a filter screen to trap large particulates passing through T.C. fittings. Often used for distillation to retain activated carbon for filtering neutral spirits or used in pot distillation to retain botanicals in the vapor stream. This screen can also be used with the 1.5" Hop Bong as an inline filter. The screen has a mesh size of 7 which will block particles larger than 2.83mm or 2830 microns. This slightly larger mesh size makes this screen ideal for use in a distillation basket. KegLand Part Number: KL28516
$7.20
1.5'' Tri-Clamp Tee
1.5" Tri-Clamp Tee 304 Stainless Steel
$29.95
1.5'' Tri-Clamp x 1'' Barb Long Stem, Stainless Steel
A 1.5" Tri-Clamp to 1" barb fitting.304 Stainless Steel
$19.99
1.5'' Tri-Clamp x 1'' Barb, Short, Stainless Steel
A 1.5" Tri-Clamp to 1" barb fitting.304 Stainless Steel
$18.95
