Products
Ss Infussion Mash Tun ReCirculation T Barb
SS Brewtech's 1/2" Re-circulation Tee Barb 304 stainless steel 1/2" hose barb 1/2" fpt on mashtun side 1/2" mpt on outer side Hose clamp and silicone tubing not included.
$15.95
SS304 Cooling Coil - 50' x 5/16'' OD
304 Stainless Steel Cooling Coil. Includes grommets, ferrules, and hex nut fittings for easy connection to shanks. Specifications: Material: Stainless Steel 304 Size: 50ft x 5/16" OD (Tube) Diameter: 5.25" (coil) Height: 6.75" (coil)
$99.99
Stainless - 1/8 in FPT x 1/4 in Barb
Stainless 1/8 inch female pipe thread with 1/4 inch barb.
$6.30
Stainless - T.C. Clamp (2.5 in)
Stainless steel 2.5" TC clamp
$11.95
Stainless Beer Thread Adapter | 2 pack | Female Beer Thread x 1/2 in. BSP | KOMOS®
Convert draft shanks or keg couplers for use with 1/2" female threaded fittings. Featuring a hex nut exterior for easy wrench adjustments. The female side is standard beer thread which is used on both ports of standard keg couplers and the tail end of draft shanks. Once installed, you can adapt these input/output ports to any 1/2" fittings and valves you might find useful. The 1/2" male BSP end may require teflon tape if used with 1/2" NPT fittings. Comes in a pack of 2
$11.00
Stainless BSP Washer - 3/8 in.
Stainless steel 3/8" BSP washer.
$3.30
Stainless Bucket Fermenter with Heating - 35L
If you've been looking to step up from fermenting in plastic buckets or carboys, this is an excellent choice for your next fermenter. Stainless steel is a much better option than glass or plastic, as it is extremely easy to clean and virtually lasts forever. There's also much less chance of contamination as stainless doesn't scratch like plastic. Over time, you'll get scratches in plastic fermenters from normal wear and tear, creating microscopic havens for bacteria. Meanwhile, glass carboys are always at risk of breaking which is something you will never have to worry about with stainless steel. The Bucket Buddy represents a great value for a stainless fermenter in this size. Another advantage over carboys and plastic buckets is the domed base inside the fermenter which is great for yeast flocculation when fermentation is complete. The included racking arm will make it easy to transfer out every last drop of beer while leaving the yeast cake undisturbed. The entire racking arm and ball valve assembly is weldless, which means you can remove the assembly to clean and sanitize it between batches. You can even boil the assembly for added assurance that it's been sterilized. This model has an integrated (concealed) 36-watt heating element. No need to worry about accessories such as heating belts and external temperature controllers. This stainless steel fermenter will keep your yeast at optimal temperature making it the ideal option for cold climates. To help maintain a steady temperature, the Bucket Buddy pairs well with either the BrewZilla Neoprene Jacket or the FermZilla Insulating Jacket. For cooling, you can place the fermenter in a dedicated refrigerator or drill into the lid to install a Temp Twister Cooling Coil. A temperature controller probe can then be taped to the side of the fermenter. This unit comes standard with silicone tubing to transfer from the ball valve to your bottles or cans, as well as a stopper and airlock for the domed lid. Specifications: Capacity: 35L Brimful Body Material: 304 Stainless steel Outlet Valve Type: Stainless steel, nylon bushings, silicone seal and stainless rotating rack arm. Thread on tap is 1/2" Lid: 304 Stainless steel Display: Digital temperature display Heating: 36 Watt Concealed Element Stopper & airlock included Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C External Dimensions: 28" H x 15" W (including handles) Internal Dimensions: 22" H x 11.75" W Includes a #3 rubber stopper
$199.00
Stainless Butterfly Hose Clamps | 10 Pack | 1/2 in. to 1 in.
These stainless steel butterfly hose clamps are the ideal choice for connecting silicone tubing to quick disconnects, pumps, and more. The butterfly thumb screw allows for toolless tightening and untightening, so you can build out or break down your system without rummaging through the toolbox for the right screwdriver. Fits 1/2 in. OD to 1 in. OD tubing. Actual size of the clamp is 14-25 mm (0.55-0.98 in.). This 10-pack comes in a convenient zip lock bag.
$11.00
Stainless Carbonation and Line Cleaning Cap
This stainless steel ball lock cap features soda bottle threads, allowing you to convert a soda bottle into a pressurized growler. It is compatible with both gas and liquid ball lock disconnects. Also works well for cleaning draft lines. Simply add line cleaning solution to a soda bottle, attach it to the draft line, and open the faucet to push solution through. This is a direct replacement to ball lock fittings included with the FermZilla pressure kit. It can also be attached to the FermZilla collection container, enabling you to purge the collection container of oxygen. 28mm PCO 1881 Threads
$15.50
Stainless Carbonation and Line Cleaning Cap - Duotight Compatible
This stainless steel ball lock cap features soda bottle threads, allowing you to convert a soda bottle into a pressurized growler. It is compatible with both gas and liquid ball lock disconnects. Also works well for cleaning draft lines. Simply add line cleaning solution to a soda bottle, attach it to the draft line, and open the faucet to push solution through. This is a direct replacement to ball lock fittings included with the FermZilla pressure kit. It can also be attached to the FermZilla collection container, enabling you to purge the collection container of oxygen. 28mm PCO 1881 Threads This version features a 6.5mm Duotight compatible stem. Use the 8mm or 9.5mm reducer to attach EVABarrier draft line.
$15.50
Stainless Hop Filter w/ Adjustable Hook - 14 in. x 6 in.
Keep your hops in the kettle and out of the fermenter with this hop filter basket. Conveniently hangs inside the boil kettle and can be removed at any time if needed. The adjustable hook is great for positioning the filter based on the size of your kettle and the volume of wort you're boiling. When fully extended, you can lower the basket an extra 9 inches into the kettle. Also works great as a secondary filter when transferring sweet wort from a mash tun to the kettle. Specifications: Made from 304 stainless steel Adjustable hanging hook 14" H x 6" Ø
$47.50
Stainless Lock Nut - 3/8 in. BSP
Stainless Lock Nut. 1/4 in. female BSP.
$3.10
Stainless Mix-Stir De-Gassing Rod, 22''
Stainless 22" rod with replaceable plastic fins and end cap to protect carboys. Attaches to electric drill.
$32.99
Stainless Nipple - 1/2 in x 2 in Threaded
1/2" MPT(male pipe thread) x 2" length stainless steel nipple. 304 stainless steel.
$4.99
Stainless Nipple - 3/4 in x 1 in (Close)
3/4" x Close Stainless Steel Nipple
$5.95
Stainless Pressure Kit for FermZilla
Unlock the FermZilla's true potential with the FermZilla Pressure Kit. This will enable fermenting under pressure, carbonating, and serving without ever needing to move beer out of the fermenter. The kit inlcudes two stainless female threaded ball lock fittings with barbs, which thread onto the existing openings atop the FermZilla's lid. A silicone dip tube with stainless steel float work as the beverage out, allowing only the clearest beer from top of the tank to be dispensed. The Pressure Kit will turn the FermZilla into a true unitank! This pressure kit features a 23" silicone dip tube, which is appropriately sized for the 27L FermZilla. Key Features: Ferment beer under pressure to reduce ester and fusel alcohol production Always draw clear beer with the floating dip tube Keg beer that has already been carbonated Use CO2 to push beer into a keg or through a filter into a keg Eliminate kegging altogether by carbonating and serving directly from the FermZilla Please note: pressure kit does not include the lid pictured in the example photo. The ball locks and floating dip tube are installed on the FermZilla's existing lid.
$29.99
Stainless Reducing Coupler - 3/4'' FPT x 1/2'' FPT
Stainless steel reducing coupler. 3/4" FPT (female pipe thread) to 1/2" FPT (female pipe thread)
$5.00
Stainless Sight Gauge Adapter w/ plug
Connects a sight glass to a thru-wall or weldless bulkhead fitting.
$23.95
Stainless Steel 12''x5'' Drip Tray, no drain
Surface mount drip tray without drain. Stainless Steel 12" x 5" Made in USA
$29.99
Stainless Steel 6''x5'' Drip Tray, no drain
Surface mount drip tray without drain. Stainless Steel 6" x 5" Made in USA
$24.99
Stainless Steel Ball Valve - 3 Piece
Spike Brewing's 1/2” stainless steel ball valve screws directly into our brew kettles, no need for an additional nipple to make the connection like competitors valves. This valve is dual sided with a male (which screws directly into your kettle) and a female end (which allows for a 1/2" barb or other 1/2" fitting). The 3 piece valve completely disassembles so a thorough cleaning is easy. Specifications: Made from 304 stainless steel 1/2" NPT male end screws directly into the kettle Full port 5/8” inner diameter
$30.00
Stainless Steel Beverage Dispenser Spigot
This stainless steel standard turn style spigot is perfect for replacing the plastic spigot included on most beverage dispensers. The threaded portion of the spigot is 5/8" OD.
$16.50
Stainless Steel Bottle Filler with Spring Tip 3/8″
Facilitates beer bottling at home on homebrewing beer bottling day, Attach the 3/8’’ silicone tube to the top barbed side, connect the tubing to the tap of the keg/beer bottle or growler and depress the spring-loaded to start filling. Whether you are filling glass bottles or PET bottles after your fermentation is complete. you need this handy all stainless 304-grade bottle filler. Made of 4 parts – Spring, seat washer, filler valve and Stainless steel 3/8″ OD tube. Very easy to disassemble and clean, we recommend to sanitize and clean, spare parts of bottle filling device are available. This spring tip beer bottle filler constructed from stainless steel More durable and longer lifetime Removable spring nozzle make it easy to clean and sanitize Spring-loaded tip for easy flow control when filling bottles This filler is compact, durable, hygienic and easy to fill bottle
$9.99
Stainless Steel Check Valve
Stainless steel check valve 1/4" male flare(mfl) to 1/4"female flare(ffl) fittings
$11.95
Stainless Steel Distilling Parrot
Stainless steel distillers parrot used to take gravity readings continuously throughout the distilling process. Placed inline with the outlet of the still so drops of distillate drop directly into the parrot. Maximum capacity of 105 ml, not including the alcohol meter. Alcohol meter not included. Kegland Part number: KL14823
$94.00
Stainless Steel Drinking Straws
Set of two stainless steel drinking straws with cleaning brush. Specifications: Straws measure: 11" x .315" x .315" / 28cm x .8cm x .8cm Flexible brush is made to fit the full length of the straw: 12" / 30.5cm Fits 24-30 oz tumblers. Use with your favorite cups and travel mugs. Use for cocktails, smoothies, shakes, sodas, water, juices, coffee or tea, hot or cold. Dishwasher safe.
$5.99 $3.50
Stainless Steel Faucet Lever
304 stainless faucet lever replacement for most standard U.S. draft faucets.
$11.99
Stainless Steel Mash Paddle 36'' (92 cm)
Made of a heavy duty food grade stainless steel.Perfect for mixing and stirring heavy mashes.No holes for easy cleaning.Dimension of the paddle: 4 3/4" (12 cm ) x 8" (20 cm )
$31.00
Stainless Steel Mesh Filter
3/8" ID welded stainless steel filter that fits over your stainless steel racking cane or your keg dip tube. Not recommended for plastic racking canes.
$4.95
Stainless Steel Pour Spout Oil Cruet Lids for Mason Jars 2 Pack
Drizzle oil, vinegar, dressings, or other liquids cleanly from a Mason jar. And look good doing it! Perfect for cooking oil. Also great for syrup, soy sauce, cooking wine, spirits, juice, thin salad dressings or sauces, and more. Air ventilation tube for smooth pouring. Dishwasher safe. Platinum cured LFGB silicone sealing rings prevent leaking. 304 stainless steel. 2 Pour Spout Lids with Platinum Silicone Seals per box.
$12.99
Stainless Steel Saddles, 500g
T500 condensers come prepacked with stainless steel saddles.These are preferred over ceramic as the ceramic absorbs the unwanted impurities and stainless steel helps with the refluxing action that removes these impurities more.Stainless steel saddles are also not porous so they last longer. 500 grams (1.1 pounds)
$36.99
Stainless Steel Shank Flange
Shank flange, stainless steel
$4.99
Stainless Steel Skimmer
This stainless steel skimmer is a great option for use as a cheese curd ladle.
$12.99
Stainless Steel Spigot - Farro
This stainless steel spigot for wide mouth glass carboys, jugs, and beverage dispensers. Stainless twist handle. This spigot is compatible with Farro Glass ported wide mouth glass carboys. Installation Instructions
$16.50
Stainless Steel Spiral Prismatic Packing | SPP | 500 g
Take your distillation to the next level with super high density spiral prismatic packing. The packing maximizes the purity of the collected distillate from your reflux still, ensuring the best possible product is collected. The prismatic spiral shape is designed to maximize its surface area helping to separate out fractions in your reflux, resulting in a highly pure and neutral end product. It is not recommended for use with pot stills when producing flavored spirits. Note: It is recommend to soak and wash the SPP before its first use with a 50:50 mix of vinegar or citric acid and warm to hot water to remove all manufacturing oils. Sizing: The SPP is approximately 3.35mm x 3.45mm. Suitable to fill a 10” x 2” T.C. Extension Tube. One 500g bag of SPP is enough to fill approximately 500 mL (16.9 oz) of volume. The HETP (Height Equivalent to a Theoretical Plate) for this packing is approximately 30mm. That is roughly 33 theoretical plates per meter. KegLand Part Number: KL25706
$55.00
Stainless Steel Storage Lids with Silicone Seals for Wide Mouth Mason Jars
We love these premium lids for fridge, freezer, and dry goods storage! At any given time you will find dozens of them in use all over our kitchen and home. Fits wide mouth mason jars Leak Proof!Rust Proof! (Almost – only extended contact with very salty liquid can rust 304 SS)Dishwasher Safe! Plastic and BPA Free – No Chemical Leach!Best Quality Materials Available – 304 Stainless Steel and Platinum Silicone!Full Lid Liners – Platinum Cured Silicone is the highest quality available. Compatible with MJL and Ball plastic lids.
$3.99 - $17.99
