Products

Brass ferrule for jockey box cooling coil. Chrome plated brass with a 5/16" ID bore.

Read more less

Upgrade your boring black tap handle with this shiny chrome plated one! 2-5/8" tall 7/8" wide at the top of the knob

Read more less

Four replacement o-rings for Ss Brewing Technologies Chronical racking arm bought after September 2014.

Read more less

Discover the pleasures of making and drinking cider. From choosing the right apples through reaping the liquid rewards of a successful pressing, this classic guide has you covered. With detailed drawings of cider-making equipment, methods, and set-up, even a novice juicer will enjoy sweet and spicy gallons in no time. Annie Proulx and Lew Nichols provide insightful, time-tested advice enlivened by a smattering of historical anecdotes. Whether you like your cider sweet or hard, you’re sure to find a recipe that satisfies.  220 pages.

Read more less

Cinnamon Sticks (cinnamomum bumannii) give ciders, holiday beers a warm-tasting, spicy flavor and aroma. Goes well with ginger, anise, orange and honey flavors. Add 1 whole stick to darken beers 5 minutes from end of boil. If stronger flavor is desired, use additional sticks or crush for intense flavor.  1 ounce package

Read more less

A dual purpose American hop with a high alpha acid (11-13%). Its character is strongly tropical and lush with a host of fruit flavors including peach, passionfruit, guava, lychee, lime and gooseberry. Because of its distinctive and intense aromatics, Citra® is best in a late addition or dry hop capacity. Used as a single variety or in a blend, Citra® does well in American wheat beers, pale ales, IPAs Belgian-style ales, and has been known to complement Brettanomyces. Similar variety is Chinook. All hop packages are nitrogen flushed to preserve freshness. Citra® is a trademark owned by Hop Breeding Company, L.L.C. 

Read more less

Citric Acid can be used in sanitizing solutions to lower the pH, which will make the SO2 level more effective. In addition, it can increase acidity at a ratio of 0.1% for each teaspoon per gallon. Adding too much, however, will create a very tart flavor.

Read more less

Standard clamp crimper for stepless style clamps with anti-slip rubberized grip. Material: Fully Hardened Steel 9" in length

Read more less

10 ml Single Dose for 5-7 Gallons Clarity-Ferm will prevent the precipitation of complexed polyphenols and proteins by hydrolyzing the sensitive (haze-active) polypeptides in the region where such hydrogen bonding occurs. The specificity of the enzyme ensures that no other beer parameters are affected. In addition to eliminating chill haze, Clarity-Ferm significantly reduces the gluten content in beers made with barley and wheat. A Clarity-Ferm treated beer made from barley or wheat usually tests below 20 ppm of gluten, the current international standard for gluten free.

Read more less

A small 6mm brush head for getting those tight areas that need a little more scrubbing.  Commonly used for cleaning coffee machine steam wands. Specifications: 7″ long brush; 6mm diamater. T handle for scrubbing Rounded tip – no surface scratching. Heat resistant brush bristles

Read more less

16 OZ Clear E-Z Cap Flip Top Bottle Thicker and stronger than regular bottles. Reinforced base, neck and bottle lop. Reusable with sturdy flip top caps. Environmentally friendly molded caps and seals. Traditionally styled bottles call attention to the craftsmanship inside! This item is excluded from free shipping

Read more less

Clearzyme by CellarScience is an enzymatic solution to create clear beer by breaking down haze causing proteins so they cannot later bind with tannins. Because it specifically targets only haze active proteins, it has no effect on flavor, aroma or head retention. Use:Add 1/4 tsp per 5 gallons at the start of fermentation. Works best at a temperature range between 50-68°F and pH of 4-6. Additional Notes:Clearzyme is a protease, or proteolytic, enzyme that partially or totally hydrolyzes peptide bonds in protein. The resulting protein fractions are then too small to bond with the polyphenols in hops. One of the huge benefits of Clearzyme is that it removes the need to cold crash, saving time and energy. Clearzyme also breaks down the Gluten protein that causes allergic reactions. Beers made with barley and wheat that have had Clearzyme added typically show gluten levels below 20ppm. Store at temperatures under 70°F. Immediately recap bottle after each use. The recommended shelf life is 12 months from the date the package is opened.

Read more less

Amazing for Syrah, Petite Syrah, Grenache, Tempranillo and Carignane. Emphasizes structure, aromatic complexity and mouthfeel. Flavors of cherry, pepper and chocolate. Good choice if temperature control is not an option during fermentation. 17% alcohol tolerance. Use 1 g per gallon.

Read more less

Introducing another cool accessory to compliment Spike Brewing CF series conicals. Their closed pressure transfer kit (CPT kit) will allow you to rack your beer from your conical to keg without exposing it to oxygen. This will help you avoid off-flavors that can be caused by oxygen coming in contact with your beer.  The Spike Brewing CPT kit uses all stainless hardware and Ultra Barrier tubing which is antibacterial due to its silver lining. It is also BPA free and over-sized to promote a quick transfer from conical to keg. CPT Kit Includes: 1.5" TC to flare 1.5" TC clamp 1.5" TC gasket Flare to liquid ball lock Gas ball lock blow off The Spike Brewing gas manifold bundle can be seen HERE.**Always use a 15psi pressure relief valve when pressurizing a tank****

Read more less

Blast through the clouds with this fruity and hopped-up Cloud Breaker IPA. A refreshing mix of Citra and Chinook hops creates a punchy citrus flavor with a hint of pine. This recipe is sure to please any crowd. Each kit consists of high-quality malt extract, specialty grains, and hops, meticulously chosen to bring out the unique malt and hop flavors of an American IPA. Follow easy-to-follow steps included in the kit to guarantee a successful and seamless batch every time. Unleash your inner brewmaster and impress your friends at a summer soirée or relax with a refreshing drink after a long day. This IPA kit promises an exciting brewing journey and a delicious end result. Our recipe kits include steeping muslin socks for grain and hop additions. Yeast and priming sugar are not included in the kit and are optional add-on items. Makes 5 Gallons.  Estimated Beer Stats LME Option DME Option Original Gravity (OG) 1.069 1.069 Final Gravity (FG) 1.013 1.012 Approximate ABV 7.3% 7.3% Color (SRM) 8 7 Bitterness (IBUs) 56 56 Ingredient / Instruction Sheet

Read more less

Cluster is a dual-purpose hop that offers a well-balanced alpha to aroma profile, delivering notes of citrus. Flavor and Aroma profile include citrus - grapefruit, floral, pine, herbal, spicy, berries, caramel. Alpha Acid: 6.5 - 7.5% Beta Acid: 4.5 - 5.5% Total Oil: 0.4 - 1.0 ml/100g

Read more less

CO2 Bulk Head Length : 2-7/8” Long x 7/16″ 1/4" MFL Thread • This bulkhead allows you to keep your CO2 outside of the refrigerator or freezer and run your gas line through the wall without drill a large whole. The rubber gaskets included seal of the whole or the gas and gives.

Read more less

CO2 Bulk Head Length : 4” Long x 7/16″ 1/4" MFL Thread • This bulkhead allows you to keep your CO2 outside of the refrigerator or freezer and run your gas line through the wall without drill a large whole. The rubber gaskets included seal of the whole or the gas and gives.

Read more less

Does not ship.  In store pick up only. Swap out your empty CO2 cylinder with a full one. Tanks will be swapped with the same material as brought in. Tanks must be aluminum and certification no older than 5 years. Cylinders that are out of compliance will not be accepted.  

Read more less

If you use different kegs and couplers on a normal basis, save time by add quick disconnects to your draft systems gas line tubing. Place a quick disconnect fitting in the gas line and no tools are needed to disconnect from the gas source. Simply pull back the sleeve on the female side and the connection separates and the gas is shut off.   Note: To make a complete set please order the Disconnect Tailpiece or Disconnect Nipple with Hose Barb. Specifications: Connection: Female Side Length: 3-1/4" Barb: 3/8" O.D. (to fit 5/16" I.D. Gas Hose) Material: Brass Shut-off: Built in

Read more less

If you use different kegs and couplers on a normal basis, save time by add quick disconnects to your draft systems gas line tubing. Place a quick disconnect fitting in the gas line and no tools are needed to disconnect from the gas source. Simply pull back the sleeve on the female side and the connection separates and the gas is shut off. Note: To make a complete set please order the Disconnect Air Coupler. Specifications: Connection: Male Side Length: 2" Barb: 3/8" O.D. (to fit 5/16" I.D. Gas Hose) Material: Brass, anodized

Read more less

If you use different kegs and couplers on a normal basis, save time by add quick disconnects to your draft systems gas line tubing. Place a quick disconnect fitting in the gas line and no tools are needed to disconnect from the gas source. Simply pull back the sleeve on the female side and the connection separates and the gas is shut off. Note: To make a complete set please order the Disconnect Air Coupler. Specifications: Connection: Male Side Length: 1-1/4" Barb: 3/8" O.D. (to fit 5/16" I.D. Gas Hose) Material: Brass (not chrome plated)

Read more less

Adjustable chain to fit cylinder diameter. Holder for Cylinder 1 Can hold the cylinder maximum of 166mm Diameter

Read more less

Co2 gas regulator wye fitting for adding an additional shutoff. Specifications Material: Brass Finish: Chrome Plated Brass Thread Size: 1/4MPT x 1/4 FPT x 1/4 FPT Warnings / Instructions Important information: Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Read more less

CO2 inlet nipple with o-ring tank seal, left hand threads

Read more less

Replacement keg beer regulator CO2 Inlet Nipple. Specifications: 1/4" NPT Left Hand Thread (LHT) 2-1/4" Length

Read more less

Replace CO2 Inlet Stem for Micro Matic Premium Series CO2 Gas Regulators. Specifications: Left Hand 1/4" NPT Chrome Finish 2-1/4" Length Does not include Inlet Seal, Inlet Co2 Filter, or Nylon Inlet Seal.

Read more less

A coarse mesh nylon bag with a curved bottom and straight cut top, 12" x 19".

Read more less

An elastic top nylon bag of coarse mesh with a curved bottom and straight cut top, 18 ½″ × 20″.

Read more less

This system includes: --One heavy duty, very fine mesh, dutch weave stainless steel filter that fits a wide mouth (3″ internal diameter) Mason jar. --Two different silicone seals (use one at a time) --One wide mouth stainless steel lid to make everything leak proof and dishwasher safe. Use it to make cold brew coffee or iced coffee concentrate, hot or iced tea, nut milk, infused water or alcohol, or to filter or strain any liquid – all right in the jar! Scroll down for recipes. 2 sizes available to fit Wide Mouth Mason jars:  --Quart filter for 32oz or 24oz (Quart & Half) Wide Mouth jars --Half Gallon filter for 64oz Wide Mouth jars Use this filter system to make delicious cold brewed coffee and steep loose leaf tea for the perfect, smooth beverage any time of year! Coffee and tea made through this system is good for you and the environment.  Directions: For brewing and steeping: Only use the "wrap around" silicone seal that seals both sides of the metal filter (against glass and lid). This seal is optional if you keep the jar upright. Cold Brew Coffee - To make cold brew coffee concentrate, fill the filter tube about 3/4 full with coarse ground coffee, to allow for swelling. Pour in cold water to fill jar and allow it sit on your counter or in your fridge for 24 hours. Loose Leaf Tea - To steep loose leaf tea, combine 1-2 teaspoons of your favorite tea with 6-8 oz of cold water and place in fridge. Steep white or green tea for 6 to 8 hours; steep black or oolong tea for 8 to 12 hours depending on desired strength. Hot Coffee or Tea - You can also use this filter to make hot coffee and tea. Put the grounds or leaves in the filter, pour in 200 degree water, and wait a few minutes. Once brewing/steeping is complete, remove the filter, dump grounds/leaves into your compost, pour over ice, add your favorite coffee/tea additions and enjoy! For storing: Keep your brewed coffee and tea in your Mason jar fresh and leak proof with the other silicone seal and stainless steel lid included. Helpful tips: Be sure you use coarse ground coffee! A higher quality coffee grinder will give you a more consistent coarse grind. Cheaper grinders produce a mix of coarse all the way down to powdery grinds.  The cold brew coffee concentrate will be strong, so you may need to dilute it. Serve it hot or over ice, add sugar or dairy, or any other way you like! To make a more concentrated version, use more coffee grounds or steep for longer. Cold brew coffee is commonly made very strong and diluted at serving time. They are 10cm, 15cm, and 21cm tall. The mesh part is 7cm in diameter. The mesh is 50 micron dutch weave. All parts are dishwasher safe, and I find this the easiest way to clean them.

Read more less

With this capping bell, you can adapt your Colt Strong capper to be compatible with European style bottles that require a 29mm cap Capper not included.

Read more less

Colt Strong Bench Capper Easy to adjust height for different size bottles Reinforced base and steel column Reinforced plastic head and metal piston Full cup 26mm steel capping head Made in Italy

Read more less

Originally selected by Charles Zimmerman for Hopunion, Inc., Columbus is a descendant of Nugget. It is a high alpha variety and is primarily used for bittering purposes. Columbus is often referred to as CTZ, a trio of similar hops including Tomahawk® and Zeus. Specifications: Aroma: Specific aroma descriptors include black pepper, licorice, curry and subtle citrus. Alpha Acid: 14.5 - 17.5% Beta Acid: 4.5 - 6% Total Oil: 2.5 - 4.5mL/100g

Read more less

O-ring used between the column and the lid of the T500 unit. This needs to seat in the grove of the main column.

Read more less

Lupulin is the small yellow glands inside of a hop cone that contain alpha-acids and essential oils.  Through proprietary processing, Hopsteiner is able to separate the lupulin glands from the bract to provide a higher concentrate pellet containing less vegetal matter and more of the resins that boost flavor and aroma. Lupulin Pellets™ are a great option for your late hop additions and for dry hopping. Comet Lupulin Pellets™ Aroma Specification: fruit cocktail, grapefruit, grass, rose Alpha-acids: 14-16% Total oils: 1.0-2.0 Note: Repacked in oxygen barrier packaged and nitrogen flushed to preserve freshness.

Read more less

Comet is a bittering hop with the capability of adding hints of grapefruit, rose, and herbs if used as a late kettle addition. Aroma and Flavor profile include citrus - grapefruit, grassy, floral, herbal, spicy, currant, woody, menthol, stone fruit, tropical. Alpha Acid: 9.0 - 10.0% Beta Acid: 3.0 - 6.0% Total Oil: 1.0 - 2.0 ml/100g All hops are nitrogen flushed to preserve freshness.

Read more less