Search results for "bottling spigot"

This spigot fits standard 5/16", 3/8", and 7/16" hose. It's small body makes it easy to clean and it takes less space than other spigots.  The short spigot fitting design makes it easier to place closer to the bottom of the primary.  The hose will not turn when the valve is open and closed. Includes a gasket and nut.  Will fit in a 1" hole. 

Read more less

The Italian bottling spigot is a high quality, durable plastic spigot.The face of this spigot rotates so you're able to sit your bucket flush on the counter when needed and it disassembles for easy cleaning. Attach 3/8" I.D. tubing and your bottle filler for easier bottling. 

Read more less

Spigot fits standard 1/2" hose. When the valve is open and closed, the hose does not turn. Small body makes it easy to clean and takes less space than regular spigot. The short spigot design makes it easy to place it closer to the bottom of the primary. Comes assembled with gasket and nut. Fits 1" hole.

Read more less

This stainless steel spigot for wide mouth glass carboys, jugs, and beverage dispensers. Stainless twist handle. This spigot is compatible with Farro Glass ported wide mouth glass carboys. Installation Instructions

Read more less

This stainless steel spigot for wide mouth glass carboys, jugs, and beverage dispensers. Rear located twist knob. Includes optional mesh filter disc. This spigot is compatible with Farro Glass ported wide mouth glass carboys. Installation Instructions

Read more less

3/8" mpt stainless steel spigot with black handle.  

Read more less

Use as spring model or springless. Disassembles for easy change & cleaning

Read more less

This Deluxe kit includes a 2 gallon fermenter with a stainless steel spigot for continuous brewing.  The stainless spigot makes it easy to take samples and fill bottles. Can produce 12-14 16oz bottles every ~2 weeks depending on your taste. Pair with a temperature controller and heat pad for ultimate fermentation control. Includes: 2.1 gallon glass jar with stainless steel spigot Kombucha scoby Adhesive thermometer Cloth cover with rubber band

Read more less

A 7.9 gal (30 L) food-grade plastic bucket. Ideal for all fermentations, but especially ideal for wine kits, beers that tend to have a high krausen (hefe) and any fermentation that is slightly too large for your 6 gallon pail. The smooth walls are easier to clean compared with other blow molded fermenters that have quite porous walls. Why Polypropylene?   These buckets are made from polypropylene as it is less porous and significantly smoother than other HDPE fermenters. HDPE is porous and can harbor microbial activity making it more difficult to clean and sanitize. Being less porous, polypropylene also does not absorb aroma like HDPE so there is less flavor carry over from batch to batch.   Note: These buckets come molded with a threaded hole for a spigot to screw into. We recommend the Italian bottling spigot.   Please note: the spigot hole comes pre-molded into the bucket and needs to be drilled out before installing the spigot. It is recommend using a 5/8" drill bit, taking care not to strip the female threads that accept the spigot. The spigot includes a back nut that won't be needed—simply remove the back nut and thread in the spigot with the gasket in between the neck of the spigot and the bucket. The lid forms a very tight seal and requires a decent amount of downward force to lock in place. Lid sold separately.

Read more less

3/8" mpt stainless steel spigot for olive oil drum.  

Read more less

This 304 stainless steel weldless ball valve assembly is a great option to adding a spigot to your kettle or mash tun.  This assembly features a 1/2" female pipe thread on the inside that allows you to add a barb or threaded stainless screen to the inside of your kettle or mash tun.  this weldless kit includes a 1/2" Full Port ball valve and a 1/2" barb. All fittings are made from 304 type stainless steel for a lifetime of corrosion free use. Full installation directions included.You will need to drill a 1" hole in your kettle or mash tun for installation of this weldless spigot. It is recommend to use a step drill bit for this.

Read more less

Spigot and collar replacement for Speidel plastic fermenter.

Read more less

3/8 in springless bottle filler from The Vintage Shop. Springless bottle filler can be faster than bottle filler with spring, and fill more easily without pushing down on the tube. Use with 3/8 in ID plastic tubing.

Read more less

1/2 in springless bottle filler from The Vintage Shop. Springless bottle filler can be faster than bottle filler with spring, and fill more easily without pushing down on the tube. Use with 1/2 in ID plastic tubing.

Read more less

Push button start, auto stop, gravity fed, packaged with instructions. A great addition to any wine-maker's toolkit. Requires 5/16" or 1/2" ID tubing, which is not included.

Read more less

This drain tube attaches to the pressure relief valve on the Tapcooler Counter Pressure Bottle Filler to drain away excess beer! Having issues with foam and beer leaking from the Tapcooler Counter Pressure Bottle Filler? This pressure relief drain tube hooks directly up to the pressure relief valve of the Tapcooler to drain away excess beer and foam! Measuring 1 meter long (roughly 40 inches), the end of the tube can be placed in a growler or other receptacle so you can keep filling bottles without spillage!

Read more less

3/8” outside diameter racking tube fits a standard 5/16" hose. Includes a 23" racking tube. Maximum Temperature: 140 °F (60 °C) Starts siphon with a single stroke. Made out of Acrylic. BPA Free. Include the Anti-Sediment Tip. To prolong the life of your Easy Siphon, make sure that every time you assemble the unit, the inner walls of the outside acrylic tube and the O-Ring are wet. This product is not resistant to high levels of alcohol. Do not sanitize with alcohol. Acrylic is safe for long exposure to ABV (alcohol by volume) up to 15%. It is safe up to 30% ABV for short periods of time (10 minutes or so). Not safe to expose acrylic to more than 30% ABV. Exceeding those limits will damage the Acrylic and could potentially leach into the liquid. If you need to exceed these limits, please use a different product. FAQ Q. My Easy Siphon draws air while transferring?A. If air is coming from the bottom (O-Ring) you can do the following: Check your Anti-Sediment Tip, in case there is some sediment there. Reduce the siphoning height to 20 to 28" above your transferring level. Give the inner tube a twist with your hand. Make sure that the Center Tube with Seal is below the wine/beer level. Does not include 5/16" ID tubing.

Read more less

Dual function - works with or without spring. Outer diameter is 1/2".

Read more less

Replacement gasket for spigots.

Read more less

3/8” outside diameter racking tube fits a standard 5/16" hose. Includes a 15" racking tube. Maximum Temperature: 140 °F (60 °C) Starts siphon with a single stroke. Made out of Acrylic. BPA Free. Include the Anti-Sediment Tip. To prolong the life of your Easy Siphon, make sure that every time you assemble the unit, the inner walls of the outside acrylic tube and the O-Ring are wet. This product is not resistant to high levels of alcohol. Do not sanitize with alcohol. Acrylic is safe for long exposure to ABV (alcohol by volume) up to 15%. It is safe up to 30% ABV for short periods of time (10 minutes or so). Not safe to expose acrylic to more than 30% ABV. Exceeding those limits will damage the Acrylic and could potentially leach into the liquid. If you need to exceed these limits, please use a different product. FAQ Q. My Easy Siphon draws air while transferring?A. If air is coming from the bottom (O-Ring) you can do the following: Check your Anti-Sediment Tip, in case there is some sediment there. Reduce the siphoning height to 20 to 28" above your transferring level. Give the inner tube a twist with your hand. Make sure that the Center Tube with Seal is below the wine/beer level. Does not include 5/16" ID tubing.

Read more less

1/2” outside diameter racking tube fits a standard 7/16" hose. Includes a 23" racking tube. Maximum Temperature: 140 °F (60 °C) Starts siphon with a single stroke. Made out of Acrylic. BPA Free. Include the Anti-Sediment Tip. To prolong the life of your Easy Siphon, make sure that every time you assemble the unit, the inner walls of the outside acrylic tube and the O-Ring are wet. This product is not resistant to high levels of alcohol. Do not sanitize with alcohol. Acrylic is safe for long exposure to ABV (alcohol by volume) up to 15%. It is safe up to 30% ABV for short periods of time (10 minutes or so). Not safe to expose acrylic to more than 30% ABV. Exceeding those limits will damage the Acrylic and could potentially leach into the liquid. If you need to exceed these limits, please use a different product. FAQ Q. My Easy Siphon draws air while transferring?A. If air is coming from the bottom (O-Ring) you can do the following: Check your Anti-Sediment Tip, in case there is some sediment there. Reduce the siphoning height to 20 to 28" above your transferring level. Give the inner tube a twist with your hand. Make sure that the Center Tube with Seal is below the wine/beer level. Does not include 7/16" ID tubing.

Read more less

The Nukatap Counter Pressure Bottle Filler is a great way to fill bottles directly from your taps without compromising your kegged beer’s flavor, aroma or carbonation levels. It's completely made from stainless steel with no aluminum or brass components. This enables you to use a wide range of chemicals for cleaning this device without the risk of damaging the device or accessories. It's very compact and will fit any tap with 10.0 mm inner diameter spout/nozzle or with a 3/8" thread. To use this device simply connect CO2 gas line to the filling unit and away you go. The integrated counter pressure relief valve gives you good control of the counter pressure and thus the filling speed. How fast the bottle can be filled without too much foaming depends on CO2 level, beer temperature and bottle temperature. This cannot be used with taps with a vent hole but will fit pretty much all forward-sealing taps on the market such as the Nukatap SS, Nukatap FC, Intertap, Perlick 600-series and other brands. This unit is designed to fill multiple sizes of beer bottles up to 500 mL thanks to the telescopic filling stem. We recommend starting with it fully extended, then insert the stem till your at the bottom of the bottle, purge the bottle with CO2, then press the stem all the way in to form a seal on your bottle. This unit comes complete with a wide range of accessories including carbonation caps so you can quick disconnect your beer line, Duotights so you can fit a beer line to the unit and other usefull fittings you might need. Includes: All stainless steel counter pressure filler Push-in spout compatible with forward-sealing faucets (2) 8 mm Duotight adapters for filler and NukaTap spout (2) Ball Lock Post Adapters (Red / Yellow) 19.5" length of 8 mm OD x 5 mm ID EVABarrier tubing

Read more less

The BlowTie 2 Spunding Valve complete kit is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style spunding valve is much more accurate than the poppet style. The blow off pressure can be easily set using the BlowTie's integrated pressure gauge. The kit includes everything you'll need to use the spunding valve right out of the bag. The BlowTie 2 can also be upgraded with a Digital Mini Pressure Gauge. Kit Includes: BlowTie 2 w/ Integrated Pressure Gauge (0-15 psi) Kegland Red Gas Ball Lock Disconnect 8 mm OD Rigid Plastic Joiner

Read more less