Search results for "bottling spigot"

Flush and fill your bottles with ease. The valve has three positions: off, beer, and gas. Insert filler into the bottle in the off position, switch to gas to flush the bottle with CO2, and then switch to beer to fill your bottle. You can control the speed of your flow with the adjustable pressure relief. This filler is designed for use with 12 oz. bottles but can be used with larger formats by attaching a small piece of 1/4" tubing to the filler.

Read more less

Spike Brewing's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with their full port valves which have a 5/8" flow diameter; no flow restriction. Spike Brewing's proprietary fittings uses quick connect technology. The quick connect fitting simply hand screws into the kettle and the pickup tube easily pushes in/pulls out; no tools needed. Features: One size fits all kettles  Large 5/8" diameter 304 stainless tube  Simply push in for seal; no tools required Proprietary stainless push to connect fitting included Sized to pick up from the bottom edge of the kettle Made in the USA

Read more less

Spike Brewing's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with their full port valves which have a 5/8" flow diameter; no flow restriction. Spike Brewing's proprietary fittings uses quick connect technology. The quick connect fitting simply hand screws into the kettle and the pickup tube easily pushes in/pulls out; no tools needed. Features: One size fits all kettles  Large 5/8" diameter 304 stainless tube  Simply push in for seal; no tools required Proprietary stainless push to connect fitting included Sized to pick up from the bottom edge of the kettle Made in the USA

Read more less

Spike Brewing's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with their full port valves which have a 5/8" flow diameter; no flow restriction. Spike Brewing's proprietary fittings uses quick connect technology. The quick connect fitting simply hand screws into the kettle and the pickup tube easily pushes in/pulls out; no tools needed. Recommend Uses: Boil Kettle - Create a whirlpool inside your kettle so hop material collects in the center of the lower stepped section. The side pickup will drain clear wort from the side, above the stepped bottom, avoiding the hop and trub material which has settled.  Custom Kettles - Works as a top re-circulation arm or a whirlpool arm. Features: One size fits all kettles  Large 5/8" diameter 304 stainless tube Simply push in for seal; no tools required Proprietary stainless push to connect fitting included Rests on top step for clear wort draining Made in the USA

Read more less

Bellissima Bottles are perfect for when you only need a smaller amount of wine, mead, olive oil, etc. Punted. These bottles accept the #8 and #9 size corks. 12 bottles per case.

Read more less

These Spike Brewing Spike+ false bottom is for use with their Spike+ line which uses TC fittings. For the standard Spike kettle line that uses NPT fittings please see HERE. Design Features: All stainless design; no Silicone gasket to make a seal Low profile design; extremely low dead space (<.25gal)  Best filtering on the market due to dual stage filter design; 99.9% grain filtering efficiency TC Pickup tube, gasket and clamp are included False bottom and pick up tube are Made in the USA! 2 Stage Filtering: Stage 1: Filters through top plate's optimally engineered sized laser cut slits Stage 2: Bottom ring supports the grain weight while also filtering the wort again before it reaches the pickup tube **False bottoms are not designed to filter pellet hops in the boil kettle. Instead you'll want to create a whirlpool to center the hop material and then drain using a side pickup (HERE)**

Read more less

Tasteless, odorless, and food grade approved from -100F to 500F. This tubing is rated to 20 PSI and will burst at 30 PSI at 70F. It is not recommended for use with an impeller pump or household water pressure. 1/2" ID 7/8" OD 30 PSI Burst at 70F Platinum Cured  

Read more less

Flush and fill your bottles with ease. This filler has all the great features of the Counter Pressure Bottle Filler with the added benefit of a pressure gauge and flared connections. The gauge helps monitor pressure inside of your bottles and the flared connections make cleaning your lines a breeze. The valve has three positions: off, beer, and gas. Insert filler into the bottle in the off position, switch to gas to flush the bottle with CO2, and then switch to beer to fill your bottle. You can control the speed of your flow with the adjustable pressure relief. This filler is designed for use with 12 oz. bottles but can be used with larger formats by attaching a small piece of 1/4" tubing to the filler.

Read more less

This USA made blow off cane is designed to attach to the 1.5" TC on the lid of the Spike Brewing conicals. Options:Standard: For use as a standard blow off into sanitizer 1.5" TC End: Use for a blow off into sanitzer with a barb (HERE) and/or attach the Spike Brewing pressure manifold (HERE). Specifications: 1.5" TC 304SS 15” total drop Works with every size conical Made in the USA

Read more less

The Pop Culture Mead Making Kit is super easy to make and leaves you with 1 gallon of Wildflower Honey Mead. Whether you’re a seasoned brewmaster or a beginner, this kit has everything you need to create your very own delicious mead. Mead can be enjoyed at any point throughout the year, especially on a nice summer day, or shared with friends and family.  This kit was designed this kit with simplicity in mind. It comes with step-by-step instructions that are easy to follow and includes the necessary equipment to get you started! The Pop Cultures Mead Making Kit also makes an excellent gift for those who love DIY projects or enjoy Mead. Plus, it’s a great way to spend time with friends and family by sharing your creation with them! Discover • Create • Share • Enjoy Includes: 1 Gallon Fermonster Jar with Spigot Wildflower Honey CellarScience FRESH Dry Wine Yeast FermFed DAP Free Yeast Nutrient Potassium Carbonate  Airlock & Stopper Adhesive Thermometer  Bottle Filler & Tubing One Step No Rinse Cleanser You Will Need: Filtered or Spring Water PopTops Bottles or other suitable bottles Utensil for Stirring (stainless or plastic spoon recommended) Note: If the lid on the FerMonster is difficult to remove, run the lid under hot water for a few minutes and twist off. If still having trouble, we recommend the FerMonster Lid Opener. Instructions

Read more less

Made from 304 stainless steel, the hop tube is ideal for adding larger amounts of hop pellets, flowers or spices to your large mouth fermenter, boil kettle, or corny keg. The fine mesh will prevent large particles from blocking beverage out dip tubes, pumps, or chillers. It will hold approximately 5 oz of hop pellets, allowing for some space to permit full extraction of the hop oils. It is ideal for dry hopping in the keg and can also be used for fruits, wood chips, spices and more.

Read more less

Beer line assembly for your corny keg hook up. We build the assembly, you just need to secure the the ball lock disconnect to your corny keg. For outdoor dispensing we recommend selecting the black vinyl tubing. This assembly includes: 5' of 3/16"" ID vinyl draft tubing CMB Liquid ball lock disconnect with 1/4" flare fitting 1/4" swivel nut with 1/4" stainless steel hose barb stem 13.3 stepless hose clamp Plastic hand held faucet

Read more less

This easy-to-use Portuguese floor corker is the answer to the wishes of many home brewers and wine makers. If you brew Belgian beers or make wine at home, bottle caps just won't cut it. That's where this efficient corker comes in. It features sturdy metal construction and a smooth lever action that makes corking as easy as it can be. The adjustable plunger depth accommodates a wide range of bottle sizes and the bottle platform can be locked in place for added stability. Makes corking easy and efficient. For use with standard size bottle openings that will take #7, #8, or #9 corks.

Read more less

20 GALLON SPIKE+ BREW KETTLE Introducing Spike Brewing's new Spike+ line of kettles! Spike+ is just that, an improvement on an already great platform. The Spike+ line draws from the pro side of brewing with the standard use of tri-clamp (TC) fittings. TC fittings do not have any threads and use a gasket and clamp which allows for quick attaching/detaching of fittings. The Spike+ line is for the most serious homebrewers! While designing the setup of the kettle, Spike Brewing offset the ports on these kettles, so you have ample room to use our butterfly valves, or other accessories, with ease. Kettle Features: 6 – 15 gallon batch 304 (18/8) stainless steel  Sanitary welded coupler design (done at Spike Brewing's facility in Milwaukee, WI) 1.2mm thick walls (thickest on the market) 5mm tri-clad bottom (induction capable) Internal volume markings Polished finish 17.7¨ wide by 21.4¨ tall Domed bottom design Bottom coupler 2" off the bottom (2.5 gallon mark) Top coupler 4" off the bottom (4 gallon mark) Staggered design keeps the top port submerged with half batches Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store.  Drop ships from vendor.

Read more less

This smaller champagne bottle format is perfect for specialty wines or for sample sizes. Specifications: Description: Champagne / SparklingCapacity: 187 ml (6.3oz)Color: Flint (Clear)Finish: 26mm bottle cap Case of 24 bottles This item is excluded from free shipping

Read more less

A great fermenter option for kombucha brewing.  This 2.1 gallon (8L) glass beverage dispenser comes with an infusion chamber insert and stainless steel spigot.  This dispenser is also provides a great way to dispense lemon water, sun tea, or pre-mixed cocktails. Glass beverage dispenser Removable infusion chamber Stainless steel spigot *DO NOT PUT HOT LIQUIDS INTO THIS GLASS JAR*  

Read more less

Spike Brewing conicals come equipped with this 100% sanitary sample valve. Taking samples has never been so easy; simply twist the valve handle to slowly draw out a sample from your fermenter for a gravity reading. The one downside is you might end up with lower final volumes due to how easy it is to take taste tests ;)Specifications:  1.5" TC 304SS FDA Silicone seals 3/8” barb

Read more less

Easily connect a gas ball lock fitting into your Tapcooler Counter Pressure Bottle Filler with this handy ball lock CO2 adapter! Made of aluminium.

Read more less

Spike Brewing conicals come equipped with this 100% sanitary 2” TC butterfly valve. This valve has a squeeze locking/trigger handle that allows for 180 degrees of motion and 13 locking positions.The butterfly valve is the preferred valve for the cold side of brewing instead of ball valves. These butterfly valves have no pockets or crevices for bacteria to hide in. Ball valves can trap liquid between the seals in the internal ball when opening and closing the valve.The handle is a special 'shorty' style which keeps a compact design. This handle is made from extremely durable glass reinforced Nylon which is much lighter than metal handles. Specifications: 2" TC  304SS metal components FDA silicone seals Light and very durable Nylon handle Squeeze trigger with 13 locking positions

Read more less

Introducing another cool accessory to compliment Spike Brewing CF series conicals. Their closed pressure transfer kit (CPT kit) will allow you to rack your beer from your conical to keg without exposing it to oxygen. This will help you avoid off-flavors that can be caused by oxygen coming in contact with your beer.  The Spike Brewing CPT kit uses all stainless hardware and Ultra Barrier tubing which is antibacterial due to its silver lining. It is also BPA free and over-sized to promote a quick transfer from conical to keg. CPT Kit Includes: 1.5" TC to flare 1.5" TC clamp 1.5" TC gasket Flare to liquid ball lock Gas ball lock blow off The Spike Brewing gas manifold bundle can be seen HERE.**Always use a 15psi pressure relief valve when pressurizing a tank****

Read more less

50 GALLON SPIKE+ BREW KETTLE Introducing Spike Brewing's new Spike+ line of kettles! Spike+ is just that, an improvement on an already great platform. The Spike+ line draws from the pro side of brewing with the standard use of tri-clamp (TC) fittings. TC fittings do not have any threads and use a gasket and clamp which allows for quick attaching/detaching of fittings. The Spike+ line is for the most serious homebrewers! While designing the setup of the kettle, Spike Brewing offset the ports on these kettles, so you have ample room to use our butterfly valves, or other accessories, with ease. Kettle Features: 15 – 32 gallon batch 304 (18/8) stainless steel  Sanitary welded coupler design (done at Spike Brewing's facility in Milwaukee, WI) 1.5mm thick walls (thickest on the market) 6mm tri-clad bottom (induction capable) Internal volume markings Polished finish 23.6¨ wide by 27.1¨ tall Domed bottom design Bottom coupler 2" off the bottom (4 gallon mark) Top coupler 4" off the bottom (8 gallon mark) Staggered design keeps the top port submerged with half batches Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store.  Drop ships from vendor.

Read more less

Clear, flexible, and food-safe, this polyvinyl chloride (PVC) tubing is perfect for handling beverages and liquids. Fits 3/8" auto-siphons and racking canes. Material: PVC (polyvinyl chloride) ID: .313 (5/16) OD: .4375 (7/16) Max. Pressure: 45 psi (at 70°F. Higher temperatures lower maximum working pressures.) Max. Temperature: 150°F  Sells by the foot or by a 100' roll. Prop 65 Warning: This product contains phthalates (DEHP, DBP, BBP), a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.

Read more less

The Tapcooler extension tube is perfectly suited to provide the counter pressure filler a bit of extra space for the bottles where there is not enough room to fit them directly under the tap. The one end of the connection hose is designed to screw into the top of the filler unit and the other end of the tube is designed to screw into the filler unit's removable tap nozzle insert. Includes two small o-rings to seal the extension line on either end (there is already an o-ring seal inside the filler unit when the tap nozzle insert is removed). Tubing (based on length chosen) Stainless steel faucet fitting Stainless steel Tapcooler fitting Required o-rings for sealing purposes Comes pre-assembled!

Read more less

The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style of spunding valve is much more accurate than the poppet style. The 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing. The BlowTie 2 features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The gauge is removable and can be swapped out with a gauge of a different pressure range. Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-15 psi WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge.

Read more less