Search results for "spike solo"
Thermometer - Non Adjustable Face
This Spike Brewing 1/2” NPT Brew Thermometer is ready to screw directly into the kettle. This 2.5” stemmed thermometer can cover 40-220 degree ranges. The 3” glass dial will display all the information you need at a glance and while withstanding the high heat from the burner below. The thermometer also has calibration screw for added accuracy.
$30.00
2" TC x QC (Quick Connect)
Out of all the ways to attach silicone tubing to your brew kettle or conical, quick connect ball lock fittings are a great option. The ease of connecting/disconnecting and cleaning is unmatched by standard hose barbs or cam locks. These fittings can easily be attached using one hand even with heavy brewing gloves. The inside diameter of this quick connect fitting is 1/2". This creates a full port design and will not restrict flow going through the barb. Specifications: 304SS 2" TC x QC 1/2" ID
$18.00
Stainless Steel Ball Valve - 3 Piece
Spike Brewing's 1/2” stainless steel ball valve screws directly into our brew kettles, no need for an additional nipple to make the connection like competitors valves. This valve is dual sided with a male (which screws directly into your kettle) and a female end (which allows for a 1/2" barb or other 1/2" fitting). The 3 piece valve completely disassembles so a thorough cleaning is easy. Specifications: Made from 304 stainless steel 1/2" NPT male end screws directly into the kettle Full port 5/8” inner diameter
$30.00
HERMs Coil Replacement O-Rings
Set of 3 replacement o-rings for the Spike Brewing 1/2" quick connect HERMs coil fittings. Specifications: FDA approved Buna-N Sold in set of 3
$3.00
Quick Connect Fitting - FQC x Barb
Out of all the ways to attach silicone tubing to your brew kettle we like quick connect ball lock fittings the most. The ease of connecting/disconnecting and cleaning is unmatched by standard hose barbs, cam locks or tri-clamps. These fittings can easily be attached using one hand even with heavy brewing gloves. The over sized barb (5/8" OD) is specially designed for our 1/2" silicone tubing. The larger size does two things: It stretches the tubing over the barb creating a tight fit requiring no hose clamps. The inside diameter of our barb is 1/2" compared to standard 1/2" barbs which have a smaller 3/8" size. This creates a full port design and will not restrict flow going through the barb. Specificatioins: 304SS 5/8" barb x QC 1/2" ID
$17.00
4" Clear TC Cap
Probably the coolest add-on for the Spike Brewing conical line! There heard many brewers who have switched from clear carboys to stainless and they only have one complaint; I can't see my beer fermenting any more! Brewers are curious by nature and we're not ones to stop that curiosity so here is our solution to that problem.Their engineers designed a clear polycarbonate (same material as bullet proof glass) cap which allows you to see inside the top of the conical when it's fermenting. This has also been tested against common brewery chemicals and has held up against the likes of PBW and StarSan. Specifications: 4" TC Clear polycarbonate material
$33.00
Temperature Coil Connect Fittings
At Spike Brewing, they love quick connect fittings. Why use tools when you don't need to? These 90° quick connect fittings will make attaching insulated tubing to your temp coil a breeze. Specifications: Connect your temp coil to your insulated tubing without tools 3/8" to 1/2" connections 90° design; prevents glycol lines from kinking 2 fittings included per purchase Detailed TC-100 product guide:Product Guide.pdf
$18.00
2" TC x 5/8" OD Barb
Not all hose barbs are created equal! The Spike Brewing special 2" TC x barb fitting features a shorter profile and over sized diameter barb. The over sized barb (5/8" OD) is specially designed for 1/2" Silicone tubing. The larger size does two things: It stretches the tubing over the barb creating a tight fit requiring no hose clamps. The inside diameter of our barb is 1/2" compared to standard 1/2" barbs which have a smaller 3/8" size. This creates a full port design and will not restrict flow going through the barb. Specifications: 304SS 2" TC 5/8" OD 1/2" ID
$16.00
1.5" TC x QC (Quick Connect)
Out of all the ways to attach silicone tubing to your brew kettle or conical, quick connect ball lock fittings are a great option. The ease of connecting/disconnecting and cleaning is unmatched by standard hose barbs or cam locks. These fittings can easily be attached using one hand even with heavy brewing gloves. The inside diameter of this quick connect fitting is 1/2". This creates a full port design and will not restrict flow going through the barb. Specifications: 304SS 1.5" TC x QC 1/2" ID
$17.00
Quick Connect Fitting - MQC x MNPT
Out of all the ways to attach silicone tubing to your brew kettle we like quick connect ball lock fittings the most. The ease of connecting/disconnecting and cleaning is unmatched by standard hose barbs, cam locks or tri-clamps. These fittings can easily be attached using one hand even with heavy brewing gloves. The inside diameter of our QC fitting is 1/2". This creates a full port design and will not restrict flow going through the barb. Specifications: 304SS 1/2NPT x QC 1/2" ID
$9.99
Pressure Gauge
This pressure gauge can be used while pressure fermenting, briting or pressure transferring. Specifications: 0-30psi 2" Dial 1/4"npt **This accessory is to only be used with the FLEX+ or the upgraded high pressure lid**
$15.00
1/2" NPT Stainless Plug
This square head plug has 1/2" NPT threads and is made from 304 stainless steel. It can be used to plug any of the 1/2" NPT couplers welded onto Spike Brewing kettles.
$7.00
Glycol Line Coupler
The straight quick connect fittings allow you to increase the length of the Spike Brewing insulated tubing. This insulated glycol tubing is sold in increments of 6ft. If you need to increase the length of tubing, this is your solution. Specifications: 1/2" to 1/2" connections 2 fittings included per purchase (enough to connect 2 lengths of the Spike Brewing insulated tubing)
$11.00
Quick Connect Replacement O-Rings
Set of 3 replacement o-rings for quick connect fittings. Specifications: Silicone o-ring Sold in set of 3
$3.00
2" TC Butterfly Valve
Spike Brewing conicals come equipped with this 100% sanitary 2” TC butterfly valve. This valve has a squeeze locking/trigger handle that allows for 180 degrees of motion and 13 locking positions.The butterfly valve is the preferred valve for the cold side of brewing instead of ball valves. These butterfly valves have no pockets or crevices for bacteria to hide in. Ball valves can trap liquid between the seals in the internal ball when opening and closing the valve.The handle is a special 'shorty' style which keeps a compact design. This handle is made from extremely durable glass reinforced Nylon which is much lighter than metal handles. Specifications: 2" TC 304SS metal components FDA silicone seals Light and very durable Nylon handle Squeeze trigger with 13 locking positions
$75.00
1.5" TC x 5/8" OD 90° Barb
This elbow will connect to any 1.5" TC port. It features an oversized barb designed to use with 1/2" tubing. This creates a full port opening for unrestricted flow and a tight seal that requires no hose clamps. Specifications: 1.5" TC 304SS Oversized 90 degree barb for 1/2" tubing
$17.00
Flex+
FLEX+ FERMENTER Introducing the new Spike FLEX+! The FLEX+ was designed to be the most versatile, upgradable and longest lasting small batch fermenter on the market. With currently over 20 accessories (and counting) you'll never run out of run toys to bling your FLEX out with. The FLEX+ is the big brother to the standard FLEX. Out of the box it features an upgraded tri-clamp racking arm, tri-clamp butterfly valve and upgraded high pressure lid and clamp that can handle up to 15 psi. The higher pressure rating allows for carbonating your beer in the same tank you fermenter in. Carbonate your beer in 24hrs opposed to 7 days!All hardware shown HERE is included! Flex Features: 304 stainless steel; 1.2mm (18ga) All sanitary welded ports (no-weldless fittings) Designed for 2.5 to 6 gallon batches 7 gallon total capacity 15 psi working pressure Use for pressure transfers Use as a brite tank Etched volume markings Fully polished finish Dimensions: 15" wide by 21¨ tall (to top of airlock) See additional dimensions here Lid Features: 4" TC modular top port Allows for hop additions, temp control coil, top sight glass, etc Three 1.5" TC ports which allow for: Blow Off Port – Dedicated port for an airlock or blow off tube Hop Port – Dedicated port for adding hops PRV Port – Dedicated port for your pressure relief valve (PRV) Stainless band clamp for attaching the lid Completely removable lid for easy cleaning Body Features: 1.5" TC racking port with rotatable racking arm 1.5" TC secondary port for thermometer, sample valve, etc Limited availability in store. Drop ships from vendor.
$590.00
Spike Flow
It's time to go with the (higher) Flow. With features like an Air Relief Valve (ARV), 6-vane impeller design, stainless steel precision machined casting and an integrated impeller shaft and thrust bearing, the Flow is the newest and most badass pump to hit the market. Higher Pressure & Flow-What's more important? Moving your wort quickly or a powerful CIP? The Spike Flow is leading at both. No compromises here. Air Relief Valve-Air in your lines creating headaches? The Flow features an ARV bleed system. Problem solved. Clog Proof Impeller-With the built-in chopping tines on the impeller, you'll never have to stop mid-Brew Day because of a clogged pump head. Quietest on the Market-The Flow is for brewers who prefer listening to their brewing playlist or the game on TV rather than a loud pump. Specs: • Best-in-class 9GPM (gallons/minute) flow rate• Best-in-class 9.5 PSI of pressure • Air Relief Valve (ARV) makes priming easy and convenient• Built in 1/2" drain barb• 6-vane impeller design optimized for performance and durability• 304 stainless steel precision machined casting with maximized inlet and outlet ports• Integrated chopping tines to prevent clogging• Black anodized motor shell and shot-blasted housing• Easy disassembly, cleaning and reassembly• Ultra-quiet, fan enclosed motor: 120v, 60 Hz • 6 foot power cord • 9" length x 5" width x 7" height • Continuous use rated Available in NPT fittings or TC fittings
$275.00 - $302.00
All-In-One PRV
Spike Brewing's The All-In-One PRV is fully adjustable from 0-15psi which allows for use with everything from pressure fermenting to spunding to pressure transfers to a keg! Not only does the All-In-One have an adjustable pressure release but it also has a set 1psi vacuum release! Specifications: Adjustable pressure relief from 0-15psi Built in vacuum release 1.5" tri-clamp connection (2) 1/4" NPT connections for gas post and pressure gauge Pressure gauge and ball lock gas post included Sanitizer cup with drain port Quick pressure relief plunger For use on up to 3bbl fermenters User Guide Link
$180.00
Spike Tank Racking Arm
Specifically designed for our Tank Bottom Drain Boil and Solo kettles, this racking arm is the key component to make sure you take only the highest quality wort to your fermenter and leave hops and trub behind in your kettle. The dual 1.5" TC flange allows the pickup tube to attach to the kettle and allows for a 1.5" TC accessory to attach to the arm as well. We use 5/8" tubing which flows up to four times better than our competitors 1/2" size. Tank Racking Arm fits all 5 sizes of the Tank Bottom Drain Kettles Oversized 5/8" diameter 304 stainless tube Indicator pin lets the brewer see which way the tube is pointing when installed and covered in wort Rotatable when installed from the outside Made in the USA **A 1.5" gasket and clamp will need to be purchased separately if you do not already have spares**
$45.00
Insulated Tubing
Another Spike innovation that we think solves two big issues. The obvious benefit from insulated lines is increasing your cooling efficiency from your glycol lines. The other benefit is the elimination of line 'sweating'. No more pools of water on your floor during those hot Summer days! *Sold in 6ft increments* Specifications: FDA approved, super flexible PVC tubing 3/8" ID x 1/2" OD tubing 3/8” ID matches temp coil ID; no flow restrictions in the system 3/4" thick flexible insulation Eliminates line sweating and dripping onto your floor Easily connects to our temp control coil with the new Spike Brewing quick connect fittings Made in the USA Detailed TC-100 product guide:Product Guide.pdf
$36.30
Insulated FLEX Jacket
The Spike Brewing insulated FLEX jacket uses high quality, extra thick, yet flexible neoprene material to insulate your FLEX from the worst ambient conditions like a hot garage or cold basement. Each custom designed, hand stitched (in the USA) jacket is custom tailored to fit the FLEX. This jacket was designed by a former Lululemon designer because if you're going to cover up shiny stainless steel it better look amazing. We think she did the trick! Specifications: Sewn in the USA (of imported fabric from Japan and China) Reinforced stitching around all ports, legs and handles for extra strength Helps maintain stable fermentation temps regardless of ambient conditions Stops the tank from ‘sweating’ in warm weather Interior Velcro for attaching the optional heater Machine washable Detailed TC-100 product guide:Product Guide.pdf
$95.00
10 Gallon Spike+ Kettle
10 GALLON SPIKE+ BREW KETTLE Introducing Spike Brewing's new Spike+ line of kettles! Spike+ is just that, an improvement on an already great platform. The Spike+ line draws from the pro side of brewing with the standard use of tri-clamp (TC) fittings. TC fittings do not have any threads and use a gasket and clamp which allows for quick attaching/detaching of fittings. The Spike+ line is for the most serious homebrewers! While designing the setup of the kettle, Spike Brewing offset the ports on these kettles, so you have ample room to use our butterfly valves, or other accessories, with ease. Kettle Features: 2.5 – 6 gallon batch 304 (18/8) stainless steel Sanitary welded coupler design (done at Spike Brewing's facility in Milwaukee, WI) 1.2mm thick walls (thickest on the market) 5mm tri-clad bottom (induction capable) Internal volume markings Polished finish 13.8¨ wide by 17.0¨ tall Domed bottom design Bottom coupler 2" off the bottom (1.25 gallon mark) Top coupler 4" off the bottom (2.5 gallon mark) Staggered design keeps the top port submerged with half batches Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store. Drop ships from vendor.
$363.00
Gas Manifold Bundle
Spike Brewing's specially designed CO2 gas manifold is designed to attach directly to the 1.5" TC port on your fermenter's lid. This manifold allows you to easily add pressure for transfers, stuck yeast dumps, purging oxygen, carbonating, etc. The manifold has 3 ports for a pressure gauge, pressure relief valve and a ball lock gas post. One part, three functions, easy assembly, easy cleaning; what more could you ask for!? Gas Manifold Bundle: Gas Manifold Pressure Gauge (Link) PRV (Link) Gas Post (Link) **Always use a 15psi pressure relief valve when pressurizing a tank**
$85.00
