Search results for "bottling spigot"

The Italian bottling spigot is a high quality, durable plastic spigot.The face of this spigot rotates so you're able to sit your bucket flush on the counter when needed and it disassembles for easy cleaning. Attach 3/8" I.D. tubing and your bottle filler for easier bottling. 

Read more less

This spigot fits standard 5/16", 3/8", and 7/16" hose. It's small body makes it easy to clean and it takes less space than other spigots.  The short spigot fitting design makes it easier to place closer to the bottom of the primary.  The hose will not turn when the valve is open and closed. Includes a gasket and nut.  Will fit in a 1" hole. 

Read more less

Spigot fits standard 1/2" hose. When the valve is open and closed, the hose does not turn. Small body makes it easy to clean and takes less space than regular spigot. The short spigot design makes it easy to place it closer to the bottom of the primary. Comes assembled with gasket and nut. Fits 1" hole.

Read more less

This stainless steel spigot for wide mouth glass carboys, jugs, and beverage dispensers. Stainless twist handle. This spigot is compatible with Farro Glass ported wide mouth glass carboys. Installation Instructions

Read more less

This stainless steel spigot for wide mouth glass carboys, jugs, and beverage dispensers. Rear located twist knob. Includes optional mesh filter disc. This spigot is compatible with Farro Glass ported wide mouth glass carboys. Installation Instructions

Read more less

3/8" mpt stainless steel spigot with black handle.  

Read more less

A 7.9 gal (30 L) food-grade plastic bucket. Ideal for all fermentations, but especially ideal for wine kits, beers that tend to have a high krausen (hefe) and any fermentation that is slightly too large for your 6 gallon pail. The smooth walls are easier to clean compared with other blow molded fermenters that have quite porous walls. Why Polypropylene?   These buckets are made from polypropylene as it is less porous and significantly smoother than other HDPE fermenters. HDPE is porous and can harbor microbial activity making it more difficult to clean and sanitize. Being less porous, polypropylene also does not absorb aroma like HDPE so there is less flavor carry over from batch to batch.   Note: These buckets come molded with a threaded hole for a spigot to screw into. We recommend the Italian bottling spigot.   Please note: the spigot hole comes pre-molded into the bucket and needs to be drilled out before installing the spigot. It is recommend using a 5/8" drill bit, taking care not to strip the female threads that accept the spigot. The spigot includes a back nut that won't be needed—simply remove the back nut and thread in the spigot with the gasket in between the neck of the spigot and the bucket. The lid forms a very tight seal and requires a decent amount of downward force to lock in place. Lid sold separately.

Read more less

Spigot and collar replacement for Speidel plastic fermenter.

Read more less

1/2 in springless bottle filler from The Vintage Shop. Springless bottle filler can be faster than bottle filler with spring, and fill more easily without pushing down on the tube. Use with 1/2 in ID plastic tubing.

Read more less

Dual function - works with or without spring. Outer diameter is 1/2".

Read more less

The Nukatap Counter Pressure Bottle Filler is a great way to fill bottles directly from your taps without compromising your kegged beer’s flavor, aroma or carbonation levels. It's completely made from stainless steel with no aluminum or brass components. This enables you to use a wide range of chemicals for cleaning this device without the risk of damaging the device or accessories. It's very compact and will fit any tap with 10.0 mm inner diameter spout/nozzle or with a 3/8" thread. To use this device simply connect CO2 gas line to the filling unit and away you go. The integrated counter pressure relief valve gives you good control of the counter pressure and thus the filling speed. How fast the bottle can be filled without too much foaming depends on CO2 level, beer temperature and bottle temperature. This cannot be used with taps with a vent hole but will fit pretty much all forward-sealing taps on the market such as the Nukatap SS, Nukatap FC, Intertap, Perlick 600-series and other brands. This unit is designed to fill multiple sizes of beer bottles up to 500 mL thanks to the telescopic filling stem. We recommend starting with it fully extended, then insert the stem till your at the bottom of the bottle, purge the bottle with CO2, then press the stem all the way in to form a seal on your bottle. This unit comes complete with a wide range of accessories including carbonation caps so you can quick disconnect your beer line, Duotights so you can fit a beer line to the unit and other usefull fittings you might need. Includes: All stainless steel counter pressure filler Push-in spout compatible with forward-sealing faucets (2) 8 mm Duotight adapters for filler and NukaTap spout (2) Ball Lock Post Adapters (Red / Yellow) 19.5" length of 8 mm OD x 5 mm ID EVABarrier tubing

Read more less

This 304 stainless steel weldless ball valve assembly is a great option to adding a spigot to your kettle or mash tun.  This assembly features a 1/2" female pipe thread on the inside that allows you to add a barb or threaded stainless screen to the inside of your kettle or mash tun.  this weldless kit includes a 1/2" Full Port ball valve and a 1/2" barb. All fittings are made from 304 type stainless steel for a lifetime of corrosion free use. Full installation directions included.You will need to drill a 1" hole in your kettle or mash tun for installation of this weldless spigot. It is recommend to use a step drill bit for this.

Read more less

Push button start, auto stop, gravity fed, packaged with instructions. A great addition to any wine-maker's toolkit. Requires 5/16" or 1/2" ID tubing, which is not included.

Read more less

This easy-to-use Portuguese floor corker is the answer to the wishes of many home brewers and wine makers. If you brew Belgian beers or make wine at home, bottle caps just won't cut it. That's where this efficient corker comes in. It features sturdy metal construction and a smooth lever action that makes corking as easy as it can be. The adjustable plunger depth accommodates a wide range of bottle sizes and the bottle platform can be locked in place for added stability. Makes corking easy and efficient. For use with standard size bottle openings that will take #7, #8, or #9 corks.

Read more less

3/8" mpt stainless steel spigot for olive oil drum.  

Read more less

3/8” outside diameter racking tube fits a standard 5/16" hose. Includes a 23" racking tube. Maximum Temperature: 140 °F (60 °C) Starts siphon with a single stroke. Made out of Acrylic. BPA Free. Include the Anti-Sediment Tip. To prolong the life of your Easy Siphon, make sure that every time you assemble the unit, the inner walls of the outside acrylic tube and the O-Ring are wet. This product is not resistant to high levels of alcohol. Do not sanitize with alcohol. Acrylic is safe for long exposure to ABV (alcohol by volume) up to 15%. It is safe up to 30% ABV for short periods of time (10 minutes or so). Not safe to expose acrylic to more than 30% ABV. Exceeding those limits will damage the Acrylic and could potentially leach into the liquid. If you need to exceed these limits, please use a different product. FAQ Q. My Easy Siphon draws air while transferring?A. If air is coming from the bottom (O-Ring) you can do the following: Check your Anti-Sediment Tip, in case there is some sediment there. Reduce the siphoning height to 20 to 28" above your transferring level. Give the inner tube a twist with your hand. Make sure that the Center Tube with Seal is below the wine/beer level. Does not include 5/16" ID tubing.

Read more less

This Deluxe kit includes a 2 gallon fermenter with a stainless steel spigot for continuous brewing.  The stainless spigot makes it easy to take samples and fill bottles. Can produce 12-14 16oz bottles every ~2 weeks depending on your taste. Pair with a temperature controller and heat pad for ultimate fermentation control. Includes: 2.1 gallon glass jar with stainless steel spigot Kombucha scoby Adhesive thermometer Cloth cover with rubber band

Read more less

3/8” outside diameter racking tube fits a standard 5/16" hose. Includes a 15" racking tube. Maximum Temperature: 140 °F (60 °C) Starts siphon with a single stroke. Made out of Acrylic. BPA Free. Include the Anti-Sediment Tip. To prolong the life of your Easy Siphon, make sure that every time you assemble the unit, the inner walls of the outside acrylic tube and the O-Ring are wet. This product is not resistant to high levels of alcohol. Do not sanitize with alcohol. Acrylic is safe for long exposure to ABV (alcohol by volume) up to 15%. It is safe up to 30% ABV for short periods of time (10 minutes or so). Not safe to expose acrylic to more than 30% ABV. Exceeding those limits will damage the Acrylic and could potentially leach into the liquid. If you need to exceed these limits, please use a different product. FAQ Q. My Easy Siphon draws air while transferring?A. If air is coming from the bottom (O-Ring) you can do the following: Check your Anti-Sediment Tip, in case there is some sediment there. Reduce the siphoning height to 20 to 28" above your transferring level. Give the inner tube a twist with your hand. Make sure that the Center Tube with Seal is below the wine/beer level. Does not include 5/16" ID tubing.

Read more less

Want to bottle directly from your ball or pin lock keg using the Tap Cooler Counter Pressure Bottle Filler? This beer valve connector tube assembly will allow you to do just that! Setup is a snap. Simply remove the faucet fitting on the Tapcooler filler, attach the valve end, attach a ball (or pin) lock connector into the included swivel nut set on the tubing, and hook to your keg, and get to bottling! The valve acts as the beer faucet normally would, starting and stopping flow directly from the keg. The attached tubing is 2 meters (about 78 inches) long, giving you plenty of versatility in your bottling range. Another great accessory from Tapcooler! Tapcooler and ball lock disconnect not included.

Read more less

Easily connect a gas ball lock fitting into your Tapcooler Counter Pressure Bottle Filler with this handy ball lock CO2 adapter! Made of aluminium.

Read more less

Replacement gasket for 3 and 5 spout bottle fillers. This gasket attaches to the end of the bottle filler tube, with the wide, flat "brim" of the gasket pressed against the inside of the reservoir. Usage tips:The gasket should be fitted onto the the filler tube until it stops, it should not be pushed on all the way. The stainless steel tube should not be protruding all the way through the gasket. For the best seal, the gasket should be positioned so that the flat "bottom" surface if the gasket is parallel to the flat side of the reservoir. The round ridge around the outside of the gasket should be depressed evenly when seated on the side wall.  Dimensions: The inside of the gasket measures .39", or about 3/8" diameter. The width of the body of the gasket is 0.7" (not including the flange)

Read more less

Flush and fill your bottles with ease. This filler has all the great features of the Counter Pressure Bottle Filler with the added benefit of a pressure gauge and flared connections. The gauge helps monitor pressure inside of your bottles and the flared connections make cleaning your lines a breeze. The valve has three positions: off, beer, and gas. Insert filler into the bottle in the off position, switch to gas to flush the bottle with CO2, and then switch to beer to fill your bottle. You can control the speed of your flow with the adjustable pressure relief. This filler is designed for use with 12 oz. bottles but can be used with larger formats by attaching a small piece of 1/4" tubing to the filler.

Read more less

Spike Brewing's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with their full port valves which have a 5/8" flow diameter; no flow restriction. Spike Brewing's proprietary fittings uses quick connect technology. The quick connect fitting simply hand screws into the kettle and the pickup tube easily pushes in/pulls out; no tools needed. Features: One size fits all kettles  Large 5/8" diameter 304 stainless tube  Simply push in for seal; no tools required Proprietary stainless push to connect fitting included Sized to pick up from the bottom edge of the kettle Made in the USA

Read more less

The Tapcooler extension tube is perfectly suited to provide the counter pressure filler a bit of extra space for the bottles where there is not enough room to fit them directly under the tap. The one end of the connection hose is designed to screw into the top of the filler unit and the other end of the tube is designed to screw into the filler unit's removable tap nozzle insert. Includes two small o-rings to seal the extension line on either end (there is already an o-ring seal inside the filler unit when the tap nozzle insert is removed). Tubing (based on length chosen) Stainless steel faucet fitting Stainless steel Tapcooler fitting Required o-rings for sealing purposes Comes pre-assembled!

Read more less