Hardware & Fittings
Bushing, 1/2''FPT x 3/4''MPT, S/S
3/4" MPT x 1/2" FPT Bushing304 Stainless SteelÂ
$3.95
4" TC Clamp
A standard clamp for all of Spike Brewing's 4" TC ports Specifications: 4" TC 304SS
$15.00
1.5" TC Sight Glass
The Spike Brewing engineers have totally redesigned the 1.5" TC sight glass from the ground up! Standard sight glasses use 4 long bolts that need to be tightened in a criss-cross pattern to get even pressure to avoid leaks. Their new design is made up of only 5 parts compared to 26 parts in a standard sight glass. No tools are required to assemble or disassemble; simply twist the knurled end cap off. The glass is also protected by the stainless guard which protects the glass from even the clumsiest brewer. The sight glass allows for direct attachment to the bottom port of our conicals. The sight glass allows for monitoring flow, color and clarity. A sight glass is also helpful when collecting yeast. Specifications: 1.5" TC 304 stainless steel Extra thick Pyrex glass 5” long 25% lighter than previous design **A 1.5" gasket and clamp will need to be purchased separately if you do not already have spares**
$65.00
Blow-Off Cane
This USA made blow off cane is designed to attach to the 1.5" TC on the lid of the Spike Brewing conicals. Options:Standard: For use as a standard blow off into sanitizer 1.5" TC End: Use for a blow off into sanitzer with a barb (HERE) and/or attach the Spike Brewing pressure manifold (HERE). Specifications: 1.5" TC 304SS 15” total drop Works with every size conical Made in the USA
$45.00 - $65.00
Gas Manifold Bundle
Spike Brewing's specially designed CO2 gas manifold is designed to attach directly to the 1.5" TC port on your fermenter's lid. This manifold allows you to easily add pressure for transfers, stuck yeast dumps, purging oxygen, carbonating, etc. The manifold has 3 ports for a pressure gauge, pressure relief valve and a ball lock gas post. One part, three functions, easy assembly, easy cleaning; what more could you ask for!? Gas Manifold Bundle: Gas Manifold Pressure Gauge (Link) PRV (Link) Gas Post (Link) **Always use a 15psi pressure relief valve when pressurizing a tank**
$85.00
3/4" Male ght and 1/2" fpt
This brass fitting has 3/4" male garden hose thread on one side and both 3/4" mpt and 1/2" fpt on the other.
$3.95
1/2'' x 1'' SS Nipple, Threaded Close
Stainless steel 1/2" x 1" close nipple. Used for connecting a 1/2" ball valve to a union.
$5.00
Camlock Type B
Type B camlock disconnect fitting. Female camlock with 1/2" Male Pipe Thread (MPT). 304 Stainless steel construction. 150 psi working pressure.
$15.50
1/4" Flare Fitting Tee
Stainless steel tee with 1/4" flare thread on all three ends.
$15.00
Washer - Stainless Steel
This stainless steel washer is specially sized to fit over male NPT fittings. Inner diameter: 0.82" Outer diameter: 1.25" Thickness: ~0.0625"
$1.00
Stainless Nipple - 1/2 in x 2 in Threaded
1/2" MPT(male pipe thread) x 2" length stainless steel nipple. 304 stainless steel.
$4.99
4" Clear TC Cap
Probably the coolest add-on for the Spike Brewing conical line! There heard many brewers who have switched from clear carboys to stainless and they only have one complaint; I can't see my beer fermenting any more! Brewers are curious by nature and we're not ones to stop that curiosity so here is our solution to that problem.Their engineers designed a clear polycarbonate (same material as bullet proof glass) cap which allows you to see inside the top of the conical when it's fermenting. This has also been tested against common brewery chemicals and has held up against the likes of PBW and StarSan. Specifications: 4" TC Clear polycarbonate material
$33.00
1.5'' Tri-Clamp x 3/4'' Female BSPP, Stainless Steel
A 1.5" Tri-Clamp to 3/4" Male Pipe Thread.304 Stainless Steel
$29.00
1.5'' Tri-Clamp x 1'' FPT, Stainless Steel
Connect a 1" female pipe thread fitting (FPT) to a 1.5" Tri-Clamp (TC) fitting with this stainless steel piece of hardware.
$22.00
CIP Ball
Another cool innovation from the Spike Brewing engineers; their low pressure CIP ball! They wanted to design a CIP ball that didn’t require home brewers to purchase another pump if they already owned one. Small brewery pumps, like Chugger and March pumps used on our Spike System, are very common for most home brewers. However, most CIP balls require a much larger pump to work properly. This CIP ball was specifically designed to work with the more common 7GPM pumps. It has also been tested with larger sump pumps which are also commonly used for CIP applications. Spike Brewing also designed the CIP ball to fit through a 1.5" TC port. This allows for quick install of the CIP ball after fermentation. This works especially well with cleaning the temp control coil. They recommend a 5-10min CIP with 160F brewery wash to give a nice and shiny FLEX or conical fermenter. Pro Tip:If you do not have a FLEX+ lid with 1.5" TC port you can attach the CIP ball to the secondary port of your FLEX after an initial dump and rinse. Then simply CIP as described above! Specifications: 1.5" TC x 1.5" TC 304SS Low flow design
$70.00
Hose Stem, 5/16'' Barb, 1/4'' fpt
Brass hose stem. 5/16" barb 1/4" female pipe thread (fpt)
$2.99 $1.99
Quick Connect Replacement O-Rings
Set of 3 replacement o-rings for quick connect fittings. Specifications: Silicone o-ring Sold in set of 3
$3.00
2'' Maximizer for Kettle
2" maximizer allows you to transfer more liquid from your brew kettle. The maximizer will thread into a 1/2" FPT fitting inside your kettle.
$11.95
3/8" Full Port Stainless Ball Valve
304 stainless steel full port ball valve with 3/8" female pipe thread (FPT) on both ends. Note: Handle may be blue instead of the pictured yellow.
$16.50
15 psi Pressure Relief Valve
When pressurizing your Spike Conical you'll always want to use a pressure relief valve (PRV). This will prevent the tank from being over pressurized and causing a potential failure to occur. This Spike Brewing PRV was developed with their OEM specifically to work with their CF series Conical. It will keep your tank below the 15psi max working pressure rating. The PRV also has a handy bleeder pull ring to release built up pressure. Specifications: 15 psi release 1/4" npt threads Spike Brewing's specially designed gas manifold is also now available.
$25.00
Pickup Tube - Shorty
Spike Brewing's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with their full port valves which have a 5/8" flow diameter; no flow restriction. Spike Brewing's proprietary fittings uses quick connect technology. The quick connect fitting simply hand screws into the kettle and the pickup tube easily pushes in/pulls out; no tools needed. Features: One size fits all kettles Large 5/8" diameter 304 stainless tube Simply push in for seal; no tools required Proprietary stainless push to connect fitting included Sized to pick up from the bottom edge of the kettle Made in the USA
$30.00
Camlock Type A
Type A camlock disconnect fitting. Male camlock with 1/2" Female Pipe Thread (FPT). 304 Stainless steel construction. 150 psi working pressure.
$9.90
BrewZilla | DigiBoil | Adjustable Lid Clamps | Stainless Steel | Set of 4
Get the exact tension you need with your BrewZilla or DigiBoil with KegLand's Stainless Steel Adjustable Clamp Set. Permanently replace the standard lid clamps and adjust the tension to your needs. These clamps are only intended for use with the metal Distillation Lid or Boiler Extension Kits. If you are having trouble getting the correct tension to form a good seal with those accessories, these adjustable clamps can help you dial in the fit. They should never be used with the standard glass lid. Compatible with 35L and 65L BrewZillas (Gen 3 / Gen 4), DigiBoils (Gen 1 / Gen 2), and Boiler Extensions. Installation Instructions: You will need a pair of bolt cutters or tin snips to cut the standard clamp off. (Please see product photos for optimum cut location). Remove the nut and bolt and thread it through the clamp. Ensure that the grooved part is facing outwards (photo for reference). If you do not have the grooved part facing outwards, the clamp will be blocked by the round lip of the boiler. Loosen the bolts and spin the clamp up or down to adjust the tension. Use the nuts to lock the desired tension. It is always best to start looser than you think, then adjust tighter. Warning: Do not use the adjustable clamps with a glass lid, the clamps are only designed for distillation lids or other metal accessories.
$13.50
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) - 1.5 in. x 12 in.
304-type stainless steel tri-clamp extension tube with 1.5" clamp ends. 12" long.
$29.00
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) - 1.5 in. x 5 in.
304-type stainless steel tri-clamp extension tube with 1.5" clamp ends. 5" long. This is the same length as a Tee. It is used to swap instruumentation in and out of an established system.
$25.50
Stainless Tri-Clamp Weldless Bulkhead - 2 in.
Add a 2" tri-clamp port to any tank or lid with this 304 stainless steel weldless bulkhead. Just drill a 45-47 mm hole and tighten this item to your vessel wall. For distilling purposes, this is perfect if you want to fit an extension tube between the BrewZilla / DigiBoil distillation lid and the copper pot or reflux still.
$29.99
4" TC Cap
Cap any 4” port with this stainless steel cap. Specifications: 4" TC 304SS
$16.00
1.5'' Tri-Clamp x 1'' Barb Long Stem, Stainless Steel
A 1.5" Tri-Clamp to 1" barb fitting.304 Stainless Steel
$19.99
Male Garden Hose Fitting with 3/8" Barb
Brass, male garden hose fitting with 3/8" barb for tubing.
$4.99
Silicone Gasket, 1/2'' TRI-CLVR
Tri clover compatible 1/2" silicone gasket.
$1.50 $1.00
1/2 in MPT Solid Plug - Stainless
1/2" MPT stainless steel solid plug. Uses a 7/8" wrench.
$5.25
90° Elbow, 1/2'' fpt x 1/2'' fpt, Stainless Steel
90° stainless steel elbow, 1/2" fpt x 1/2" fpt
$5.49
1/2 in. mpt X 3/8 in. Barb Elbow, Stainless
This 1/2 in. mpt X 3/8 in. Barb Elbow is made from corrosion-resistant 304 Stainless steel.
$6.50
1/2 in MPT Hollow Plug - Stainless
1/2" MPT stainless steel hollow plug.
$6.50
Stainless Tri-Clamp Concentric Reducer - 4 in. x 2 in.
Stainless steel Tri-Clamp reducer with 4" T.C. and 2" T.C. connections.
$55.00
Spike Tank Racking Arm
Specifically designed for our Tank Bottom Drain Boil and Solo kettles, this racking arm is the key component to make sure you take only the highest quality wort to your fermenter and leave hops and trub behind in your kettle. The dual 1.5" TC flange allows the pickup tube to attach to the kettle and allows for a 1.5" TC accessory to attach to the arm as well. We use 5/8" tubing which flows up to four times better than our competitors 1/2" size. Tank Racking Arm fits all 5 sizes of the Tank Bottom Drain Kettles Oversized 5/8" diameter 304 stainless tube Indicator pin lets the brewer see which way the tube is pointing when installed and covered in wort Rotatable when installed from the outside Made in the USA **A 1.5" gasket and clamp will need to be purchased separately if you do not already have spares**
$45.00
