Hardware & Fittings
Blow Off Cane for 7 Gallon Chronical
Works with lids with 3" Tri-Clamp fitting. Blow off cane for SS Brewtech's 7 gallon Chronical Fermenter 304 stainless steel pressure relief valve included Does not include 3" Tri-Clamp gasket
$53.95
Ss Infussion Mash Tun Hose Barb - 3/8 in. to Knurled 1/2 in. FPT
3/8" Hose Barb with 1/2" fpt Knurl for SS Brewtech Mashtun 304 stainless steel Fits into SS Brewtech's mash tun bulkhead fitting Needed for MT recirculation manifold
$11.95
Spike+ Pickup Tube - Center
The Spike+ center pickup is specially designed to work with the Spike+ line of kettles. The dual 1.5" TC flange allows the pickup tube to attach to the kettle and have a valve or other 1.5" TC accessory attached to the outside. Spike Brewing uses 5/8" tubing which flows up to 4x better than their competitors 1/2" size. Features: Oversized 5/8" diameter 304 stainless tube Sized to pick up from the center of the kettle Made in the USA **A 1.5" gasket and clamp will need to be purchased separately if you do not already have spares**
$40.00 - $45.00
Grainfather Replacement Perforated Plate Seal
A replacement silicone seal for the perforated plates on the top and bottom of the Grainfather brewing system. Replaces the seal on the the Grainfather's perforated plates if yours gets damaged or goes missing. An authentic replacement part from the makers of the Grainfather
$8.99
HERMs Coil Replacement O-Rings
Set of 3 replacement o-rings for the Spike Brewing 1/2" quick connect HERMs coil fittings. Specifications: FDA approved Buna-N Sold in set of 3
$3.00
Brass Hose Quick Disconnect, Male
Garden hose thread, male quick disconnect
$7.95
Brass Hose Quick Disconnect, Female
Garden hose thread, female quick disconnect
$9.95
Brass Hex Cap, 1/4" FFL
1/4" female flare thread brass hex cap fitting.
$1.25
$4.25
3/8" Stainless Half Coupler
Stainless steel 3/8" female pipe thread (FPT) half coupler. Note: Half couplers have thread for insertion from one side only.
$4.99
Pickup Tube - Center
Spike Brewing's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with their full port valves which have a 5/8" flow diameter; no flow restriction. Spike Brewing's proprietary fittings uses quick connect technology. The quick connect fitting simply hand screws into the kettle and the pickup tube easily pushes in/pulls out; no tools needed. Features: One size fits all kettles Large 5/8" diameter 304 stainless tube Simply push in for seal; no tools required Proprietary stainless push to connect fitting included Sized to pick up from the bottom edge of the kettle Made in the USA
$33.00 - $45.00
