Thermometers

Adhesive LCD thermometer with a range of 39F to 97F.

Read more less

A simple pen-style thermometer that displays °F or °C.  Good for measuring the temperature of liquid, food, and BBQ. Specifications: Temperature Range: -58°F ~ +572°F (-50°C ~ +300°C) Resolution: 0.1°C/F Battery Included: 1 x 1.5V (LR44) Probe made of stainless steel Overall dimensions (L x W): 9.6" x 0.9" (245mm x 25mm) 0.15" (4mm) Ø Probe Auto power off after 15 minutes  

Read more less

This beer thermometer is a perfect tool for any home brewer. Made of glass, and features a temperature range scale of 0-220 F. A reliable, easy-to-use homebrew thermometer is an essential tool that will help you calibrate all the rest of your equipment and ensure optimal results for the end product of your balanced brewing. Temp. scale of 0-220 F. 12" in length (305 mm).

Read more less

The steel shot and wax at the bottom of this glass thermometer allows it to float in solutions. This thermometer should not be used to stir the wort, nor should it be used to gauge the temperature of already boiling liquid. Temperature Range: 0-220 F (-10 To 95.5 C). Length: 9" (23Cm).This product uses alcohol, not Mercury, to measure temperature. It does not contain any toxic materials.

Read more less

The Spike Brewing 1.5" TC thermometer will connect directly to the 1.5" port on your kettle. There is no need for a thermowell which allows for quicker more accurate temp readings. It can be used with direct fired kettles but avoid having the flame lapping directly onto the thermometer. **A 1.5" gasket and clamp will need to be purchased separately if you do not already have spares** Specifications: 1.5" TC connection 3" dial 304SS 2.5" stem length Hermetically sealed Calibration adjustment screw

Read more less

This Spike Brewing 1/2” NPT Brew Thermometer is ready to screw directly into the kettle. This 2.5” stemmed thermometer can cover 40-220 degree ranges. The 3” glass dial will display all the information you need at a glance and while withstanding the high heat from the burner below. The thermometer also has calibration screw for added accuracy. 

Read more less

  Take temperature readings instantly and from a safe distance with this infrared thermometer gun. Use it to check how close you are to the hot break before your boil, or measure the temp of your empty mash tun and grains to help predict temperature loss when you add strike water and mash in. Dual lasers is an important feature when choosing infrared thermometers because it allows for much higher accuracy. When measuring an object, a dual laser thermometer gun will help you greatly in finding the convergence point of the measured target and spot ratio. This can only be achieved with a dual laser unit. Features: Double Laser pointer for higher accuracy Simple one-handed operation Laser ON/OFF switch Low battery indication LED backlight Reads in °F / °C Automatic shutdown after 15 seconds Display hold, Scan function FCC, CE, ROHS Certified Notes: 1. When using this product to measure temperature, consider the ratio between the distance (the length from the product to the measured object) and the size of the measurement area, referred to as the object distance ratio. When the distance between the product and the measured object increases, the measurement area will increase accordingly. 2. If you want to use boiled water to measure the unit's accuracy, do not allow smoke or water vapor to contact the temperature sensing area, and keep the measurement angle at 45 ~ 60 degrees.

Read more less

This low energy RAPT enabled Bluetooth Thermometer is compatible with the Gen 4 BrewZilla, RAPT Temperature Controller, and RAPT Fermentation Chamber. It will not work without one or more of these devices. By receiving multiple BLE thermometer sensors, the BrewZilla can make smarter and more automated decisions on how to control the brewing or distillation process.  For example, a BLE thermometer can be placed into your coolant water so you get an alarm if the temperature is too high, or a BLE thermometer can be put into the middle of the malt pipe so you can more accurately control elements switching on/off to achieve a core malt pipe temperature. RAPT ConnectivityThe new Bluetooth thermometer can connect up to your BrewZilla Gen 4, RAPT Temperature Controller, RAPT Fermentation Chamber and log that temperature data and manipulate fermentation/brewing and distillation profiles in the RAPT Portal. This greatly reduces the need for handwritten records of your brew day as it's all done automatically. The RAPT portal also allows you to see every brew you have done in the past with logged temperatures from the main unit's probe and this digital thermometer. This unit can also be set up to get push notifications to your mobile phone of when to sparge for example. Along with this ease of access and control, the RAPT BrewZilla will also allow you to fully customize your brew day with profiles specifically tuned to your style of brewing or your recipe. For example, you could set up step mash profiles using the core temperature of your mash instead of the cavity below where the BrewZilla's main temp probe is located. Greater accuracy for a more repeatable recipe that results in much better beer! Specifications: Temp Range: -4°F – 572°F (-20°C – 300°C) Probe Length: 8" (20 cm) Note that the probe tip is very sharp Remove black plastic tip before use Plastic tip should be used for storage to avoid punctures / injury Cable Length: 39" (100 cm) Magnetized Backing Plate (Orange) 2 x AAA Batteries (included)

Read more less

This thermometer features a 3" face, 1/2" MPT, and a 6" probe. This thermometer is great for a mash tun but may not be suitable for kettles if you're using an immersion chiller due to it's longer probe.

Read more less

This stainless thermometer features a 3" face, a 2" probe, and a high temperature food grade silicone gasket. The shorter probe works well with immersion chillers and heat exchangers.

Read more less

The Escali Triple Event Digital Timer will help you efficiently multi-task with three independent timers.  Each timer is visible from the easy to read display at once so you always their status.  Recall previous timer settings for repetitive tasks and keep track of time with Clock Mode. The include stopwatch function features increments of 0.01 seconds.Time 3 Events at OnceSet three independent timers and view their progress all at once on the easy to read display.Overtime CounterThe timer counts up after an alarm has expired until you press the ‘Start/Stop’ button.Timer & Stopwatch FunctionsCount up or down to a maximum of 19 hours : 59 minutes : 59 seconds.Recall Last Timer SettingRecall the last timer setting automatically at the touch of a button when performing repetitive tasks.Clock ModeWhen the timer is not in use, time is displayed in either 12 hour or 24 hour formats.Magnetic Back & KickstandUse the magnetic back to hang the display on a nearby refrigerator, or place it on a countertop using the built-in kickstand. Specifications Timer Range:  19 hr : 59 min : 59 sec Increments:  Counting down: 1 sec, Counting up: 0.01 sec Dimensions:  3.75 x 2.75 x 0.5 in Battery:  Two LR44 (included)  

Read more less

This stainless thermometer features a 3" face, a 6" probe, and a high temperature food grade silicone gasket. This thermometer works great for mash tuns.

Read more less

A perfect pocket temperature probe for homebrewing and BBQ! Check the temperature of your mash, whirlpool additions, or use it to check the internals of that fine-looking Lamb Roast on the bbq! With a range of -58°F to 572°F you will be hard-pressed not to get a temperature reading unless you live in an active volcano...Lava people or something. Specifications: Range: -58°F – 572°F (-50°C – 300°C) Resolution: 0.1°C Temperature Error: +-1°C (0~100°C) Power Supply: 1 x AG13 Battery (included) Functions: On/Off °C/°F Hold  

Read more less

Whenever wort gets too cold, you wind up with long lag times and increased opportunities for bacteria to infect your beer. Whenever it gets too hot, off-flavors can form. Blichmann Engineering lets you get it just right, with the ThruMometer™. It allows you to adjust the wort and / or water flow rates in your counterflow heat exchanger to dial in the exact wort temperature your specific yeast culture requires, with no more guesswork! While traditional in-line thermometers are made from a complicated assembly of pipe fittings with numerous places for bacteria to build up, the ThruMometer's™ entire interior is mirror-smooth, offering bacteria no place to hide. Plus, its non-serrated barbs are much easier to clean and use thus neither harboring bacteria nor damaging hoses. Press-fit ends are machined to 0.005" precision and finely finished to allow a 3/8" ID hose to snugly and securely fit over the barb. The ThruMometer™ is also far more usable than competitors' digital or bi-metal thermometers, with an extremely fast-responding, highly conductive aluminum body and liquid crystal thermometer (up to 1°F per second), incredible accuracy (0.5°F), and the ability to dial in your desired temperature to within 1°F! The ThruMometer™ never needs calibration and is built for a lifetime of use, with heat-treated, corrosion-resistant aluminum. Ultimately, your ability to dial in the exact flow you need limits water usage only to what you need for getting the job done, which is good for the environment and your wallet!  Easy to sanitize   Accurate and fast   Never needs calibration  Durable and reliable   Press-fit hose barbs   Saves water

Read more less

This Spike Brewing adjustable face dial thermometer can be orientated 360 degrees so reading the thermometer is easier. This 1/2” NPT Brew Thermometer is ready to screw directly into the kettle. This 2.5” stemmed thermometer can cover 40-220 degree ranges. The 3” glass dial will display all the information you need at a glance and while withstanding the high heat from the burner below. The thermometer also has calibration screw for added accuracy. 

Read more less