Equipment

Plastic racking cane that is 1/2" OD and 26" in length.  Includes a black anti-sediment tip. It is recommended to use 7/16" ID tubing with this cane.

Read more less

One funnel with two options: large/wide mouth for jars or narrow for bottle necks.  Includes a removable silicone strainer that fits both funnel mouths. Specifications: Transfer both liquids and solids between containers. Professional gauge stainless steel. Strainer is FDA approved silicone with high heat resistant to 500°F/260°C. Filter liquids with strainer. Dishwasher safe. Easy to hold handle Measures: 5.5" (14cm )Mouths: 5.25" (13.5cm), 2.38" (6cm)Stems: 2.125" (5.5cm), .625" (1.5cm)  

Read more less

Keep your hops in the kettle and out of the fermenter with this hop filter basket. Conveniently hangs inside the boil kettle and can be removed at any time if needed. The adjustable hook is great for positioning the filter based on the size of your kettle and the volume of wort you're boiling. When fully extended, you can lower the basket an extra 9 inches into the kettle. Also works great as a secondary filter when transferring sweet wort from a mash tun to the kettle. Specifications: Made from 304 stainless steel Adjustable hanging hook 14" H x 6" Ø

Read more less

This clamp will hold the 1/2" auto-siphon in place on your bucket or carboy.

Read more less

The MonsterMesh is your must-have tool for FerMonster Carboys.  It makes infusing mess-free and simple. Forget about the mess when infusing your wine or beer or when doing your transfers Get creative when infusing ingredients without clogging your equipment Reduce the head-space on any of your Vintage Shop FerMonsters The plastic ring sits inside the neck of the FerMonster carboy making an airtight seal when the lid is secured. Designed to be used multiple times The #50 mesh is made from food grade materials and is temperature rated to 122°F

Read more less

The FermWrap manufactured by Fermentap has 40 watts of heat spread out over two square feet to give even, gentle heating. This heater can help increase your fermentation temperature by 10-15 degrees. To dial in your temperature it is recommended to use a thermowell and a temperature controller.    

Read more less

Food-Grade Propylene Glycol USP for use in the Glycol Chiller. Dilute with distilled water to the ratio specified in the instructions for your chiller. Refer to the instructions provided with the Glycol Chiller for mixing, filling and pump priming information. 1 gallon bottle (3.79 L) PLEASE NOTE: While Propylene Glycol is considered food grade this is not meant to suggest that it is safe for consumption. In case of consumption please contact your local Poison Control Center immediately.

Read more less

Fits 3/8" racking canes, clips to the side of your bucket or carboy.

Read more less

Introducing the new Low Volume CIP Spray Rotor. An inexpensive low-flow spray head for low voltage pumps as low as 6w up to 25w. The perfect spray head that has multiple uses over your brew day. Clean In Place (CIP) with your 35L, 65L or 100L BrewZilla (can be fitted to the other branded units) What Can it Do?Clean In Place your 35L, 65L or 100L BrewZilla. Simply cut your recirculation hosing, or purchase additional silicone hosing to get the right length for your setup. You will be able to find the optimum length required by testing with water first. We found great success using the glass lid to start with to see if it is coating everything that you need it to. Includes: Custom molded rotating spray head with 1/2" BSP thread 11.8" (300mm) length of silicone tubing suitable for your BrewZilla recirculation arm Stainless nut and barb Please note: The rotating spray head can only be used in the downwards position, it cannot be tilted or mounted sideways or upside down.

Read more less

3/8 in springless bottle filler from The Vintage Shop. Springless bottle filler can be faster than bottle filler with spring, and fill more easily without pushing down on the tube. Use with 3/8 in ID plastic tubing.

Read more less

Home Fermenter Winemaking Starter Kit contains all the equipment you need to perfect your wine. From cleaning and sanitizing, through primary and secondary fermentation, you'll find everything you need in this box. This premium kit is designed for batches up to 6 gal (23 L). Contains a 6 gal (23 L) PET carboy.   Premium Kit Contents: 8 gal (30 L) Fermenter & Airlock Mixing Spoon Thermometer Strips x 2 Hydrometer & Test Jar Racking Assembly 6 Gal PET Carboy & Stopper Bottle Filler Bottle Brush Equipment Cleanser Mary's Recipes book This kit has all the equipment you need to start making wine with a wine ingredient kit at your home. This kit can also be used to make fruit wines with additional ingredients and equipment, such as a straining bag.

Read more less

Perfect heating solution for those who want more even coverage and absolute certainty that their PET fermenter will not melt even if the fermenter is empty. Punching in at an ample 30 watts, this heating wrap belt is great when paired with insulation and a temperature controller box to dial in that optimum fermentation profile. 110V plug. Approx. 39" x 9.75"

Read more less

This glass carboy thermowell is used with a digital thermostat to more accurately regulate internal temperature in your carboy during fermentation.  Pair up with a digital controller and keep your ferment within one degree of the set target. Includes a 15" stainless steel thermowell and a #6.5 stopper that will fit in a glass carboy. Note: This will not work with Johnson Temperature Controllers because their probes are too large for the thermowell.

Read more less

The MiniMesh is your must-have tool for FerMonster and PET Carboys.  It makes infusing mess-free and simple. Forget about the mess when infusing your wine or beer or when doing your transfers Get creative when infusing ingredients without clogging your equipment Reduce the head-space on any of your Vintage Shop FerMonsters and/or PET Carboys Airtight seal is guaranteed with a Vintage Shop #10 Bung or Medium Universal Stopper. Designed to be used multiple times The #50 mesh is made from food grade materials and is temperature rated to 122°F

Read more less

Ideal for adding oxygen to your fermenter, 1/4" OD barb. Made from 316 stainless steel, 1/2" diameter, stone is 1" in length.

Read more less

This fine mesh filter screen is made of durable, food-grade plastic and perfectly sized to fit the 8″, 10″, and 10″ Anti-Splash funnels. It will fit snugly into the funnel to prevent the screen from moving and material from flowing around the sides of the screen. The fine No. 35 mesh is perfect for removing pulp or other small particulates, but many brewing applications require a coarser mesh and would easily clog the No. 35 screen. Specifications: Maximum Temperature: 158°F (70°C)  Diameter         4.1″ (10.3 cm) Mesh Size       No. 35  

Read more less

Three pack of 2.5 micron filters for the Super Jet.

Read more less

The Evill Twin Roller Mill is a great tool for efficiently grinding malted and non-malted barley, corn, and grain. Specifications: Easily adjustable gap setting Longer hand crank shaft Stainless Steel rollers Hopper holds up to 10 pounds Includes a solid base Can crush up to 6 pounds per minute when using a drill at 500 rpm Easily adjusted to fit different size buckets.

Read more less

An inline sanitary filter that will fit both 1/4" or 3/8" tubing.  Filters down to 0.027 micron with 99.99% efficiency.

Read more less

This stainless mixer attaches to an electric drill for easy and thorough mixing of your mash. To get the best mash efficiency it is important to break up dough balls (clumps of grain) and ensure that the grain bed is not compacted.  Allowing maximum recirculation through your grain bed will always yield higher extraction / efficiency rates of your brew. Simply attach to your portable electric drill and secure the 1/4" hex head tightly. Overall length is 23.5" with a mixer diameter of 2.75". Highly recommended for all sizes of BrewZillas.

Read more less

  Made of a heavy duty food grade stainless steel.Perfect for mixing and stirring heavy mashes.No holes for easy cleaning.Dimension of the paddle: 4 3/4" (12 cm ) x 8" (20 cm )

Read more less

This assembly includes a 3/8" x 18" plastic racking cane, 5' of 5/16" ID clear vinyl tubing, and a plastic clamp to stop the siphon flow if necessary. This shorter racking cane is recommended for smaller fermenters such as jugs, jars, and small pails.

Read more less

The Super Sucker transfer pump is the perfect solution to moving beer or wine between vessels without the hassle of starting a siphon or positioning carboys and kegs to use gravity. Eliminates excess oxygen exposure that results from hand-pumping a siphon or blowing into a carboy hood. Use 3/8" ID tubing to hook up the Super Sucker to a racking cane and run a length from the outlet to the receiving vessel. The pump is self-priming and features a convenient on/off switch in-line on the power cord. Features: Self-Priming 10 mm Barbed Inlet/Outlet On/Off Switch Max Flow: 1.12 Gal/min Suction: 5 in. Max Lift: 150 in. (12.5 ft.) Maximum Temperature: 140°F Pressure: 90 psi Voltage: 12V DC (3.5A)  

Read more less

A compact submersible pump for small cooling projects or building a DYI bucket carboy/keg cleaning system. Specifications: Maximum flow rate: 800 GPH Max lift height: 9 ft. Comes with 2 barb fittings - 1/2" & 3/4"  High quality 60W motor runs quiet Stainless steel impeller shaft 6 ft. long power cord For cooling, recommended for batch sizes less than 10 gallons.

Read more less

Powerful mixer degasses your wine quickly and easily removes carbonation.

Read more less

Made of high quality stainless steel this mash paddle is great for mixing heavy mashes. Paddle dimensions are: 7.75"L x 5.5"W.

Read more less

WiFi/Bluetooth Enabled RAPT ControllerThe RAPT Controller is mounted to the top of the boiler body, allowing for easy operation when you have the unit set on the ground. The controller can be tilted upwards to give you an even better view, or it can be removed from the BrewZilla entirely if you’d prefer to mount the controller on your wall or lay it down on a workbench. From the controller, you’ll orchestrate your entire brew day. Program mash steps, dial in element power, and operate the integrated pump all from one screen. But the RAPT Controller is much more than a beautiful, full-color display switch board. Once synced to the RAPT Portal, you’ll be able to track, record and monitor your brews online. No need for handwriting notes or punching brew day details into your phone – all of the data from your brew is automatically logged to your portal profile. This information doesn’t just include your mash profile; it also captures detailed information about your element power and pump activity, opening the door for very precise repeatability. And the RAPT Portal isn’t just a digital archive for your brew days. With your BrewZilla powered on, you can control your brewery from virtually anywhere using your phone’s web browser. Not sure when you’ll be home from work or your kid’s ball game going into extra innings? No problem! Before you head out, simply log into the RAPT Portal from your phone and tell the BrewZilla to start heating your strike water. Along with remote control, the portal enables you to program alarms and push notifications for all of your boil additions. We’ve all been caught up with a side task and failed to throw in that yeast nutrient or clarifying agent at the end of the boil, but the BrewZilla has the back of even the most forgetful brewer! But wait, there’s more! In addition to WiFi connectivity, the RAPT Controller is also a Bluetooth gateway device. KegLand is currently developing various Bluetooth devices such as the Bluetooth Beacon Thermometer and other sensors which will be compatible with your brewery upon release. The RAPT Controller is able to receive information from Bluetooth Low Energy (BLE) devices, adjusting its processes based on this new stream of information while simultaneously logging it to your RAPT Portal. With the Bluetooth Beacon Thermometer, for example, you’ll be able to feed temperature readings from the top of your mash bed to the controller. The controller will then compare this reading with the main temp probe reading at the base of the kettle and adjust element cycling based on these combined readings. Finally, the RAPT Controller WiFi connectivity allows you to update the controller’s firmware with a single click. Take advantage of new features and accessories as soon as they become available by simply keeping your BrewZilla connected to your local WiFi network. And again, the WiFi is already built-in! No need to come back for an expensive add-on accessory down the road. High Capacity Malt PipeWith an approximately 23.5 lb capacity, the BrewZilla can mash nearly 50% more grain than similar sized models of the Anvil Foundry and Grainfather G30. If you want to fill your fermenter with more than a 5-gallon batch worth of wort, or brew the highest gravity beer recipes, the BrewZilla is the brewhouse for the job. And the included malt pipe is just the beginning. If you want to expand your brewery’s grain capacity even further, KegLand makes Boiler Extension Kits and Extended Malt Pipes for that very purpose. The malt pipe features a perforated section at the bottom which improves mash recirculation flow without sacrificing efficiency. Concave Base with Center DrainingLeave no wort behind! The concave base with center drain means you’ll be able to extract every last drop of wort to your fermenter. If you’ve brewed in a traditional flat bottom kettle, this center drain may be a bit perplexing at first. Many brewers are used to whirlpooling after the boil to pull hop matter into the center of the kettle, then transfer out using a pick-up tube that pulls from the kettle wall in order to avoid sucking up the solids. But fear not! One of the key features of the BrewZilla is the false bottom protection screen. This screen avoids the need for doing a whirlpool, filtering wort as it transfers and blocking more than 95% of hops and hot break from getting sucked into the pump. This not only prevents blocked pump issues, it also increases the efficiency of your brewhouse by eliminating kettle loss from wort that may have otherwise been left behind. Ultra Low Watt Density ElementsThe concave base on the BrewZilla also allowed for larger heating elements with significantly lower watt density than other breweries. When a lot of energy is coming off of a small element, the local temperature near the element can be so high that it scorches the wort and causes caramelization. Lower watt density essentially means you can produce lighter color beers that would otherwise have fallen victim to caramelization effect. It also reduces that chance of boilovers and reduces stress on the elements which extends their life expectancy. Easy Access Built-In PumpThe built-in pump allows you to recirculate your wort during the mash for improved efficiency and more even temperature distribution. But it can also be used to transfer your wort from kettle to fermenter rather than relying on a gravity feed, and with the optional CIP Rotor, you can use the pump to clean your BrewZilla (or fermenter) after every use. During your brew day you’ll be able to control the pump from the RAPT Controller with a dedicated button for turning the pump on and off. Another feature you’ll find on the controller is adjusting the pump flow. This doesn’t control the actual volume of the flow (you can do that from the ball valve located on the recirculation arm), but rather cycles the pump on and off automatically based on your setting. At 100%, the pump remains on continuously. But at 80%, the pump will cycle to be on 80% of the time and off 20% of the time. This may not be a feature that every brewer thinks they need, but it’s an excellent way to avoid running the pump dry accidentally, as the time the pump is off allows recirculating wort to filter through the grain bed and back into the pump inlet. If you flip over the boiler, you’ll find the magnetic drive pump and all the plumbing is right at your fingertips. This means you don’t have to disassemble the base in order to access the pump for cleaning or maintenance if required. It also means the plumbing can be changed more easily too. For instance, the unit comes as standard with the plumbing from the pump feeding both the recirculation arm and the transfer valve, but you change this so the tap outlet bypasses the pump if you prefer. Perfect for DistillationIf you want to expand your lineup of homemade libations to offer Spirits in addition to Ales & Lagers, the BrewZilla makes an excellent pot still! Add the Distillation Lid upgrade and pair it with an AlcoEngine Copper Reflux Condenser or Copper Pot Still Top. AlcoEngine Stills have been selling on the home market for years and offer some of the most affordable, beginner-friendly stills you'll find. Features: Gen 4.1 Stainless steel construction 9 gallon total capacity with a finished beer output of 5-6 gallons WiFi/Bluetooth Enabled RAPT digital temperature controller Automatic step mashing with 6 programmable stages 110-120V power and plug 12.5A Requires 20A circuit Dual heating elements (1000 watts and 500 watts) Stainless steel 1/2" ball valve for gravity draining or transferring via pump Immersion wort chiller included Stainless steel malt pipe/basket Stamped in volume markers Glass lid Adjustable lid clamps (do not use with glass lid in place - see below) Magnetic drive pump for recirculation, transfers, and cleaning Recirculation arm PPSU sight glass Bottom handle for easy lifting and pouring Rubber feet Temperature reads in °F or °C Approximately 32.75" H (with recirculation arm) x 12.5" D Recommended max. grain bill: 23.5 lbs AlcoEngine Still ready with the purchase of a Distillation Lid Pump Specs: Max Capacity: 2.9–3.1 gal/min Max Head: 4.9–6.8 ft. Poles: 2 Frequency: 50–60Hz Power: 6 watts Current: 60 mA Speed: 2600–3000rpm Duty Cycle: Continuous Capacitor: 2µF Input/Output: 13mm barb Water Resistance: IPX2 Power Options: 110v: 110V power and standard plug Dual heating elements (1000 watts and 500 watts) 220v: NEMA 6-30R plug Dual heating elements (1900 watts and 500 watts) Please Note: Due to patent restrictions in the United States, the malt pipe has been redesigned with one set of bottom feet. This model does not include the "two stage" malt pipe as advertised by KegLand Click here for Instruction Manual Warning:  Do not engage the adjustable lid clamps when brewing with the BrewZilla's standard glass lid. The clamps are only intended to be used with distillation lids or other metal accessories. With too much tension, it is possible for the lid clamps to break the glass lid when engaged. Warning: If you are going to use an extension cord with the BrewZilla, you must ensure that the cord is the correct gauge and properly rated to suit the power requirements of your brewery. See the reference chart below for the recommended gauge based on your unit and the length of cord you wish to use.

Read more less

1/2" x 26" stainless steel racking cane with anti-sediment tip, uses 7/16" ID tubing

Read more less

A weldless, 304 stainless steel heating element that will work for most kettles. Install by drilling a 1.25" hole into your kettle and tightening the nut on the outside. Specifications: 1600 watt 110 volt 304 stainless steel element Food grade, high temperature silicone seal The element itself is 11.5" long, 0.75" diameter Designed for use with 5 gallon batches Not Included: The heating element requires a power cord which can be purchased separately (Electrical connection requires a computer power connection IEC320 C13 to your 110 v plug). Warning: Having electrical devices around liquid can be hazardous. Please use caution while using this device and do not leave it unattended when in use. Fully read the instruction manual prior to use.

Read more less

Add some insulation to your BrewZilla to get better boils! This neoprene jacket will help keep the heat in for quicker and more vigorous boils. Slap it on to speed up heating; take it off to speed up chilling. Also includes a neoprene sleeve for the recirculation arm to reduce heat loss during the mash. This jacket will fit Gen 4 BrewZilla models. It is not compatible with older generations of BrewZillas and DigiBoils due to where the cutouts on the jacket are located. Features: 10% faster heat up time 50% less heat loss from boiler Fits the 35L BrewZilla Gen 4 Made from 8 mm thick neoprene which is easy to wash after use

Read more less