Equipment

Drop Ships from vendor. Please allow additional time for processing. A Feature-Packed Kettle at an Amazing Price! Our new T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. Tri-clamp fittings are standard fare in professional breweries, and they’ve been widely adopted in homebrewing as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day. With the ball valve hardware pack, you'll have everything you need to use the kettle on Day 1. The advantage of this model is that you're getting a fully functional kettle and the lowest cost. The disadvantage is that ball valves tend to trap a small amount of wort inside them, so you may need to break it down for cleaning in between brew days.   If you want the ultimate sanitary option, the BrewBuilt Brew Kettle with Butterfly Valve hardware pack is available. Or you can purchase the kettle without fittings and customize it with the fiitings that best suit your needs.   Ball Valve Pack Includes: 1/2" Ball Valve (T.C. x T.C.) 3 x Tri-Clamps 3 x Tri-Clamp Gaskets 1.5" T.C. x 1/2" Barb T.C. End Cap (for plugging thermometer port) These days homebrewers have a lot of strong choices when it comes to their kettle purchase. BrewBuilt has adopted a modern feature set designed to make the brew day easier. Silicone handle and lid grips help prevent burns. Etched internal volume markings make filling the kettle for mash or boil simple. Welded valve and thermometer ports are leak-free and never require maintenance--no more discovering worn gaskets on brew day. Sealed handle rivets are strong and allow the entire kettle to be filled if necessary. And perhaps best of all, it features the signature BrewBuilt notched lid with a silicone plug that allows the lid to be in place while using immersion chillers or an Ultimate Sparge Arm. These kettles are truly designed for brewing. Key Features: Two welded T.C. couplers for a lifetime of leak free use AISI304 Stainless Steel construction for longevity and excellent corrosion resistance Stainless handles and rivets for secure lifting Silicone coated kettle and lid handles for heat protection Lid is designed to conveniently hang from a handle 4 mm Tri-Clad Bottom with Aluminum Core heats quickly and disperses heat evenly to prevent scorching Induction burner compatible 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 1.2:1 height to diameter ratio provides optimal evaporation rate during boiling Industry-First notched lid with silicone plug accommodates an immersion chiller or sparge arm Internally etched volume markers from top to bottom for easy filling BrewBuilt Homebrewing Products: Designed for Brewing, Built to Last. Size Kettle ID (in.) Height (in.) 10 13.78 16.54 15 15.75 18.90 20 17.72 21.26 30 19.69 23.62 50 23.62 28.30   Drop Ships from vendor. Please allow additional time for processing.

Read more less

This Brewbuilt® counterflow heat exchanger is an absolute beast when it comes to chilling wort. Made from passivated 304 stainless steel, The Beast has a 30 ft. wort line with 1.5" T.C. connections and a 29.5 ft. coolant line with 1/2" male BSPT connections. The wort line is 1/2" ID so the chiller can withstand high amounts of hop additions without clogging. A mounting bar is welded to the chiller so you can mount it under your work bench or to the frame of your brewing system if desired. Specifications: Beer Line: 30 ft. long Beer Connection: 1.5" tri-clamp Coolant Line: 29.5 ft. long Coolant Connection: 1/2" BSPT Crossbar with pre-drilled mounting holes (4mm) Made from 304 stainless steel Brewbuilt® is a registered trademark owned by MoreFlavor, Inc.

Read more less

Suitable for Gen 4 BrewZillas and Gen 1 65L DigiBoils. The feet of those brewing systems slot into the cutouts on the dolly plate to make moving your brewery around a breeze. Lock your brewery in place with two locking wheels. These dollies are highly recommended if you are using a Lift-N-Lock Pulley type system for your malt pipe to move the brewery into the exact spot that you need and move away. Please take note that the bolts are pushed through from the bottom, not top down. This Dolly Bundle is highly recommended for 65L and 100L BrewZillas. Includes: Reinforced Plastic Dolly Plate 100 mm Castor Wheels (2 locking, 2 non-locking) Mounting Hardware Plate Dimensions: 21.6" Ø x 0.7" Thick (550 mm x 20 mm) BrewZilla sold separately KegLand Part Number: KB11089 NOTE: Due to the redesigned base of the Gen 2 DigiBoil, these units will not rest in the cutout holes of the dolly plate. They can still be placed on top of the dolly, but use caution when moving the kettle, especially when full.

Read more less

The chiller's coils have been positioned higher so it sits near the top of your wort, making it more efficient resulting in faster chill times. It has 50' of 1/2" copper tubing with connections for garden hoses and measures approximately 10" in diameter, 13" to the top coil, and about 24" tall. The chiller will work with converted kegs and most 10 gallon kettles.   

Read more less

Use in conjunction with the Grainfather Connect Control Box thermometer, for accurate control of your wort transfer temperature through the Grainfather Counter Flow Chiller. Avoid long lag time and off flavors by using the Grainfather Wortometer. Adjust your wort and water flow rates from the Grainfather Counter Flow Chiller by dialing in the exact wort temperature your specific yeast requires.  Requires an 8 mm inner diameter silicon hose. 

Read more less

A copper counterflow chiller with connection fittings and attached mounting bracket.  The wort in and out lines are 1/2" fpt connections with the water connections are male and female 3/4" garden hose connections.  The inner tube is made from 12' of 5/8" convoluted (twisted) copper which continually turbulates the wort as it flows through. The outer tube is made from 7/8" copper. This counterflow chiller allows you to pump wort through without having to restrict your pump to slow down flow.10 1/4" height by 11" overall diameter (coils themselves are about 6" in diameter)

Read more less

This 40 plate chiller is equipped with 3/4" MPT water in/out and 1/2" MPT wort in/out. It measures approximately 8.25 inches long, 4 inches high and 3 inches wide.

Read more less

The KegLand Heat Resistant Gloves are as impressive as they are functional with the ability to handle contact with temperatures of up to 932°F. This means that it is perfect for use with oven baking, hot pots, grilling, barbecuing, and woodstoves. Fashioned with high-quality aramid fibers which work to insulate and protect hands from burning temperatures, these gloves have a comfortable cotton and polyester lining which allows for breathability to resist sweating and a gauntlet-length style of design to protect wrists and forearm from scorching heat as well. These gloves are thick to provide excellent thermal protection and durability, but they are lightweight for extended use without fatigue. Sizing: Medium (fits most, but may be too small for very large hands). With heat resistance up to 932°F, these gloves are perfect for: Oven baking, hot pots, grilling, barbecuing, and woodstoves Adjusting logs in the fireplace Touching scorching hot utensils or food while boiling or frying Features: High-quality aramid fibers for insulation and cotton and polyester lining Designed for mobility and flexibility in mind Food-grade silicone layer Machine-washable (hang dry) KegLand Part Number: KL32292

Read more less

Perfect to use with the HIZO G14 Pizza Oven or your backyard gas grill. The double-sided griddle and flat skillet plate is the heavy-duty heat-retention cooking utensil you need in your arsenal. Weighing in at a whopping 9 lbs, this thick cast iron plate can really hold the heat! The HIZO double-sided skillet has a flat, smooth griddle side, and raised grill grooves for the other side. Both sides have a raised lip to handle some juices and oil to fry in. It can be moved around easily by the two removable handles in three location points on the plate. Directions for First Use: Conveniently pre-seasoned—simply wipe with a wet cloth and pat dry For super sizzling restaurant-style hot plate, preheat on high for at least 20 minutes Dimensions: 12" x 12" x 1" KegLand Part Number: KL24907

Read more less

The main purpose of a perforated pizza peel is to get rid of excess flour from the pizza base. But why do you want to get rid of the flour? When you’re baking pizza on hot stone or steel, you don’t want flour on the baking surface because it burns. Fine wheat flours that are most commonly used for baking pizza burn at fairly low temperatures. It’s this flour that causes trouble. Dusting your pizza peel with semolina flour, which can handle higher heat better, can also help. Burnt wheat flour will make the oven smoky and will result in more cleaning work when you’re done baking. The burnt flour tends to stick and can be a real pain to get rid of. Especially on an unglazed pizza stone. And if you’re not able to clean the stone properly, the flour can keep smoking next time you use the stone. Less Contact Surface – Less StickingA perforated peel has a smaller surface that is in contact with the pizza dough. This means pizza is less likely to stick to a perforated pizza peel. The reason is that the larger the contact surface is, the more friction there will be between the peel and the pizza. And more friction means it is more likely to stick. A smaller contact surface also means that you’ll need less flour when you’re dusting the peel. As noted above, you want as little flour as possible in the hot oven. So in addition to removing more flour from the dough itself, the peel need less flour due to the holes. Perforated pizza peels are also lighter than solid pizza peels, due to less metal on the carrying surface. This will make it easier to use the peel. Less Condensation – Crispier Pizza CrustWhen you take a hot pizza out of the oven, you may have noticed that water sometimes is formed under the pizza. This moisture makes the pizza less crispy, or even soggy. Using a solid pizza peel may create condensation when the hot pizza meets the cold (room temperature) surface. This is mostly a problem with metal peels since hot air is trapped between the pizza crust and the smooth carrying surface. Condensation happens when this hot air is cooled down to a certain point (it’s dew point), and water drops are created. When you’re using a perforated pizza peel, on the other hand, you will experience less condensation. The reason is that the holes let the hot air escape through the peel. Size Options 12" Square x 31" Long 14" Square x 31" Long Lightweight aluminum construction. Note: Phillips Head screwdriver required for assembly.

Read more less

Flare threads make it quick and easy to disconnect and sanitize your air stone. Made from 316 stainless steel, 1/2" diameter, stone is 1" in length.

Read more less

Convert the BrewBuilt T.C. brewing kettle into a mash tun using one of these false bottom kits. The heavy duty false bottom rests low in the kettle, utilizing a tri-clamp style maximizer that reduces dead space and pulls from the very bottom of your kettle, leaving no wort behind. A Silicone gasket rims the False Bottom, ensuring a tight seal to the wall with no chance of grain bypass. A handle is welded to the top of the false bottom for easy removal. Specifications: 1.5" tri-clamp and gasket included Welded T.C. maximizer False bottom gasket for tight seal Welded legs and handle Made from 304 stainless steel NOTE: These false bottom kits will fit all BrewBuilt T.C. kettles, including the electric kettle with SlingBlade heating element. It is not recommended converting the electric kettle into a mash tun as the element will scorch the grain. If you wish to use the false bottom in your boil kettle, it should be noted that the screen is designed to filter grain, so fine particle vegetal matter will pass through.

Read more less

Drop Ships from vendor. Please allow additional time for processing. BrewBuilt's T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. The appetite for tri-clamp fittings continues to grow in the homebrewing market as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day. With the ball valve hardware pack, you'll have everything you need to use the kettle on Day 1. The advantage of this model is that you're getting a fully functional kettle and the lowest cost. The disadvantage is that ball valves tend to trap a small amount of wort inside them, so you may need to break it down for cleaning in between brew days.   If you want the ultimate sanitary option, the BrewBuilt Brew Kettle with Butterfly Valve hardware pack is available. Or you can purchase the kettle without fittings and customize it with the fiitings that best suit your needs.   Ball Valve Pack Includes: 1/2" Ball Valve 2 x Tri-Clamps 2 x Tri-Clamp Gaskets T.C. to 1/2" MPT adapter 1/2" MPT x 5/8" Barb T.C. End Cap (for plugging thermometer port) Teflon Tape These days homebrewers have a lot of strong choices when it comes to their kettle purchase. BrewBuilt has adopted a modern feature set designed to make the brew day easier. Silicone handle and lid grips help prevent burns. Etched internal volume markings make filling the kettle for mash or boil simple. Welded valve and thermometer ports are leak-free and never require maintenance--no more discovering worn gaskets on brew day. Sealed handle rivets are strong and allow the entire kettle to be filled if necessary. And perhaps best of all, it features the signature BrewBuilt notched lid with a silicone plug that allows the lid to be in place while using immersion chillers or an Ultimate Sparge Arm. These kettles are truly designed for brewing. Key Features: Two welded T.C. couplers for a lifetime of leak free use AISI304 Stainless Steel construction for longevity and excellent corrosion resistance Stainless handles and rivets for secure lifting Silicone coated kettle and lid handles for heat protection Lid is designed to conveniently hang from a handle 4 mm Tri-Clad Bottom with Aluminum Core heats quickly and disperses heat evenly to prevent scorching Induction burner compatible 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 1.2:1 height to diameter ratio provides optimal evaporation rate during boiling Industry-First notched lid with silicone plug accommodates an immersion chiller or sparge arm Internally etched volume markers from top to bottom for easy filling BrewBuilt Homebrewing Products: Designed for Brewing, Built to Last. Size Kettle ID (in.) Height (in.) 10 13.78 16.54 15 15.75 18.90 20 17.72 21.26 30 19.69 23.62 50 23.62 28.30   Drop Ships from vendor. Please allow additional time for processing.

Read more less

An economy stainless steel 18.5 gallon kettle with included ball valve and barb. Specifications: 18.5 Gallon Stainless Steel Brewmaster Brewing Kettle Two Welded 1/2" Full Couplers allow for internal and external attachments Stainless 1/2" Full Port Ball Valve & nipple included for bottom Coupler Stainless 1/2" Plug included for top coupler Stamped Volume Markers Silicone Handle Grips Internal Threading allows for conversion to Mash Tun or addition of whole hop filters Internal Dimensions: 18" Tall x 17.75" Ø 1.2 mm thick walls Made from 201 Stainless Steel

Read more less

These Spike Brewing false bottoms are for use with their standard Spike kettle line that uses NPT fittings. For the standard Spike+ kettle line that uses TC fittings please see HERE. Design Features: All stainless design; no Silicone gasket to make a seal Low profile design; extremely low dead space (<.25gal)  Best filtering on the market due to dual stage filter design; 99.9% grain filtering efficiency Pickup tube and push to connect fitting are included False bottom and pick up tube are Made in the USA! 2 Stage Filtering: Stage 1: Filters through top plate's optimally engineered sized laser cut slits Stage 2: Bottom ring supports the grain weight while also filtering the wort again before it reaches the pickup tube **False bottoms are not designed to filter pellet hops in the boil kettle. Instead you'll want to create a whirlpool to center the hop material and then drain using a side pickup (HERE)**

Read more less

For any container with at least a 9" opening, such as a bucket or 5 gallon insulated cooler. The barb fitting is 3/8". Made from stainless steel.

Read more less

50 GALLON STAINLESS BREW KETTLE - V4 Spike Brewing has once again re-designed their brew kettle.  They make one of the best brewing kettles available on the market.  It is the thickest kettle on the market, with US welded fittings (no more weldless fittings) at a factory direct price. Kettle Features: 15 - 32 gallon batch size 304 (18/8) stainless steel  Sanitary welded coupler design (done at our facility in Milwaukee, WI) 1.5mm thick walls (50% thicker than competition) 6mm tri-clad bottom (induction capable) Internal volume markings Polished finish 23.6¨ wide by 27.1¨ tall Domed bottom design Bottom coupler 1.5" off the bottom (3 gallon mark) Top coupler 6" off the bottom (12 gallon mark) Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store.  Drop ships from vendor.

Read more less

30 GALLON STAINLESS BREW KETTLE - V4 Spike Brewing has once again re-designed their brew kettle.  They make one of the best brewing kettles available on the market.  It is the thickest kettle on the market, with US welded fittings (no more weldless fittings) at a factory direct price. Kettle Features: 10 - 20 gallon batch size 304 (18/8) stainless steel  Sanitary welded coupler design (done at our facility in Milwaukee, WI) 1.5mm thick walls (50% thicker than competition) 6mm tri-clad bottom (induction capable) Internal volume markings Polished finish 19.7¨ wide by 24.1¨ tall Domed bottom design Bottom coupler 1.5" off the bottom (2.25 gallon mark) Top coupler 6" off the bottom (8 gallon mark) Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store.  Drop ships from vendor.

Read more less

20 GALLON SPIKE+ BREW KETTLE Introducing Spike Brewing's new Spike+ line of kettles! Spike+ is just that, an improvement on an already great platform. The Spike+ line draws from the pro side of brewing with the standard use of tri-clamp (TC) fittings. TC fittings do not have any threads and use a gasket and clamp which allows for quick attaching/detaching of fittings. The Spike+ line is for the most serious homebrewers! While designing the setup of the kettle, Spike Brewing offset the ports on these kettles, so you have ample room to use our butterfly valves, or other accessories, with ease. Kettle Features: 6 – 15 gallon batch 304 (18/8) stainless steel  Sanitary welded coupler design (done at Spike Brewing's facility in Milwaukee, WI) 1.2mm thick walls (thickest on the market) 5mm tri-clad bottom (induction capable) Internal volume markings Polished finish 17.7¨ wide by 21.4¨ tall Domed bottom design Bottom coupler 2" off the bottom (2.5 gallon mark) Top coupler 4" off the bottom (4 gallon mark) Staggered design keeps the top port submerged with half batches Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store.  Drop ships from vendor.

Read more less

DigiMash Upgrade Kit for 35L DigiBoil. Includes everything you need to use the DigiBoil as an electric, digitally controlled mash tun. Note: The Gen 2 DigiMash Upgrade Kit is backwards compatible with Gen 1 DigiBoils. Includes: False bottom Malt pipe Wire support  Malt pipe handle Malt pipe bottom screen Kegland Part Number: KL12980

Read more less

A replacement malt pipe for the Gen 4 35L BrewZilla. Note: This malt pipe is Not Compatible with Gen 3 or older BrewZillas or DigiBoils. Please note: due to patent restrictions in the United States, the malt pipe has been redesigned with one set of bottom feet. This model does not include the "two stage" malt pipe as advertised by KegLand and featured in previous MoreBeer! YouTube videos. Dimensions: 11.8" (300 mm) Outer Diameter 10.6" (270 mm) Inner Diameter 18.1" (460 mm) Tall

Read more less

Add some insulation to your BrewZilla to get better boils! This neoprene jacket will help keep the heat in for quicker and more vigorous boils. Slap it on to speed up heating; take it off to speed up chilling. Also includes a neoprene sleeve for the recirculation arm to reduce heat loss during the mash. This jacket will fit Gen 4 BrewZilla 65l models. It is not compatible with older generations of BrewZillas and DigiBoils due to where the cutouts on the jacket are located. Features: 10% faster heat up time 50% less heat loss from boiler Fits the 65L BrewZilla Gen 4 Made from 8 mm thick neoprene which is easy to wash after use

Read more less

Ultra fine filter cartridge for Enolmatic Filter Housing Filter cartridges used with this housing can be cleaned and re-sanitized for future use.Ultra Fine 0.2 Micron Rating.

Read more less

MaltMuncher High Torque Motor Perfect for motorizing your MaltMuncher grain mill. This unit does not include a 110v receptacle box and requires some electrical assembly.  A wiring diagram is not provided from the manufacture. Specifications: 110V 1 Amp High Torque (1:7.5 ratio) Sealed Housing Fits both 10/12 mm crank shafts (works with both 2/3 roller mills) MaltMuncher grain mill is not included.

Read more less

The Super Jet electric pump filter was developed for winemakers who make 40 gallon more more per year.  It filters approximately 71 gallons (270 liters) per hour to produce that wine with a brilliant clarity. Includes a self priming electric diaphragm pump. Operates on 3 filter pads that are not included.  

Read more less

The Pre-Screen Filter can be attached to the intake hose on the SuperJet or Semi-Industrial Wine Filter to screen out large particles of sediment such as oak chips and/or seeds before they reach the pump. This should prolong the life of the check valve and allow you to maintain a much cleaner pump.  1/2" Barbs

Read more less

The Mini Jet Wine Filter has been designed with the small quantity wine maker in mind - the hobbiest who makes 5-10 gallons (20-40 litres) at a time.  If you are a hobby wine maker and are looking for that commercial shine and sparkle in your wine, the Mini Jet Wine Filter is for you. Self priming electric pump & motor. Operates on 3 filter pads (not included) Built-in drip tray & drainage tube Filters approximately 5 gallons (20 litres) in 15 minutes.

Read more less

Traditional ratchet style presses are made with a pressed steel basin with an enamel coating. The basket staves are made of a hardwood and fastened with chrome plated bolts. Baskets are in 2 pieces for easy disassembly and removal of pomace. Also included are 6 hardwood blocks and two hardwood half-rounds to more efficiently and effectively press grapes and extend the reach of the ratchet. These presses come with a removable shaft which has a large nut on the bottom of the basin. The ratchet mechanism allows you to exert more pressure on the grapes than would be possible with a simple screw mechanism. The "number" (#) of the press refers to the diameter of the basket in centimeters. There is no direct relationship between the diameter of the basket and the capacity in gallons or the number of pounds of grapes it can hold.#30 specifications: Basket diameter: 12 inches Basket height: 17 inches Basket capacity: 8 gallons Manufacturer: Fratelli Marchisio (Italy) Due to size and weight, this item is available for pick-up only.  

Read more less

Does not ship, for In-Store Pickup only. Partially Stainless Motorized Crusher Destemmer with spring loaded, adjustable rubber rollers. Rubber rollers are preferred for a gentler crush. Rollers are spring loaded to allow/protect for the passing of hard item like a rock. They do offer a degree of adjustabiliy, however no hobby model crusher destemmer will allow rollers to be separated far enough to not crush the grapes. These types of crusher destemmers must be fed grapes in a systematic way.  Overloading the hopper will bog down the machine. Internal sainless grate slides out for easy cleaning. The Crusher/Destemmer can be purchased by itself or alongside the Stainless Stand & Chute. Features: 304-Type Stainless Steel Receiving Bin, Screw Feed, and Destemming Basket. Enamel body.  A Screw Feed drive receiving bin for continual, faster, hands-free operation Adjustabe Rubber Rollers (adjustment on all small machines, regardless of make, is limited to 5mm because of the way the gears mesh.) A powerful 110V 1HP motor which provides an hourly production of approximately 3000 lbs. Replacement parts are available Big, Red Emergency stop button on motor shuts down the machine in a hurry to help reduce chance of accident Overall dimensions: 47" long x 19.6" wide x 25" high. Weight: 118 pounds (54KG.)  Imported from Italy from Enoitalia. 

Read more less

This jacket is designed to insulate your 27L FermZilla during the colder months to keep your fermentation at the optimum temperature. It can also be used with a heating wrap to warm up the fermenter if the heat from fermentation isn't enough.  This jacket also completely blocks out any light/UV to prevent light struck beer.

Read more less

Note: Limited inventory in store - Drop ships from vendor. The Grainfather G30³ is the original all-in-one electric homebrewing system and three-time winner of Craft Beer & Brewing Top Brew Gear of the Year in 2019, 2020, and 2022. Compact and simple to use, with a small footprint for brewing indoors the Grainfather G30³ v3 provides a home brewery system that with superior design, innovative features and the latest technology, allows you to brew professional quality craft beer at home. The Grainfather G30 v3 is your all in one brewing system, to make beer from grain. The sleek look, user friendly, intuitive design, and innovative features, make this your perfect brewing companion for both experienced and beginner all grain brewers. It is made from high quality 304 grade stainless steel with a 8 US Gal capacity, designed to make up to 6 US Gal of beer from one brew. New Features on the G303: 1. ) Auto Reset Switch Lifting and reaching underneath the boiler to reset your electric homebrewing system is now a thing of the past! The new auto reset switch avoids needing a physical, manual switch to reset the system; ensuring homebrewers can quickly and easily resume their brew day if an unexpected reset is required. 2. ) Grain Basket Assembly The newly redesigned Perforated Edge Grain Basket on the G303 features side wall perforations to improve wort flow and to prevent a stuck mash. In addition to the redesigned grain basket, the new Rolled Edge Mash Plate filters the wort efficiently without warping. The new rolled edges mean that there is no need for silicone seals, making the plates much easier to install, remove, and clean. The new grain basket and mash plate design means that there is no need for overflow pipework or a top plate, allowing for a hassle-free brew day. Same Great Features: Benefits of Electric Heating The Grainfather is electrically powered and designed to be used indoors. No need for burners, or hot plates, just plug in and go! It is fitted with a controlled heating element so that the correct power can be used depending on what stage of the brewing process you are at. A gentler heat is used at certain stages for accurate temperature control and and to minimise the risk of scorching and after the mash it can also ramp up the heat quickly for when more vigorous heating is required. Heating from mash to boil takes as little as 20 minutes. Wireless Control for Heat, Power, and Pumping Use the Grainfather G30³ Control Box in conjunction with the Connect App and Grainfather Brewing Community for the ultimate brewing experience. Create your recipes on the Grainfather Brewing Community and then sync these recipes with the Connect app. The control box has Bluetooth connection to your mobile device so it can be controlled remotely. This allows you to multitask or simply relax while brewing and then be alerted when to return to your next step.  Features: PID algorithm works in conjunction with a triac for more stable heating and so you can control power output Programmable step mashing Delayed heating - fill your Grainfather with water the night before and wake up to your water at strike temperature ready for brewing straight away Change between celsius and fahrenheit easily Waterproof graphic display Use in manual mode or with app Grainfather App Ability to import recipes (Beer XML files) - NOTE: iOS9 and higher Set your own boil temperature (for different altitudes) Change between celsius and fahreheit easily Grainfather calculators provided in app Create recipes on the Grainfather Brewing Community and then sync these with the Connect App to brew Powerful Magnetic Drive Pump A 6 Watt, 1,800 RPM magnetic powered pump has been fitted to recirculate the wort through the grain bed for maximum brewing efficiencies. This is also used during the cooling stage to pump hot wort through the wort chiller. The pump also makes the cleaning process quick and easy by pumping the cleaning detergent through all the pipe work. The magnetic drive pump has been selected after rigorous testing of multiple pump styles to ensure it meets the tough demands required of continuous brewing. The pump is concealed by a stainless pump cover, which is easy to pop open, giving you direct access. A pump filter is fitted inside the Grainfather to prevent hops and stray grain from entering the pump or pipework, keeping the wort clear while also preventing any blockages.  Support Grainfather is fully supported around the world by a fantastic support team who love brewing just as much as you do. Our support team is here for any technical enquiries on brewing or how the Grainfather works, as well as general customer service enquiries. All Grainfather G30³ units come with a 3-year warranty.  → Grainfather Warranty Policy PLEASE NOTE: All Grainfather G30s contain a yellow packaging strip in the boiler. This should be discarded before you begin brewing. Specifications 304 Grade stainless steel body 220- 240 volt power 8 US Gal Capacity Expandable grain basket to suit grain bills up to 20 lb A robust magnetic drive pump (6 watt, 1800 RPM) Tempered glass lid for maximum durability, heating efficiencies and visibility during your brew day. Clips to easily convert your Grainfather into a home distillery with the Pot Still Attachments  

Read more less

Ball Valve hardware pack for the BrewBuilt Brewing Kettle with 2 x tri-clamp ports. Includes ball valve and hardware for connecting tubing at the kettle's bottom port. End cap included to seal the top port if a thermometer or other accessory is not in place. Includes: (1) Stainless 3-Piece Ball Valve - 1.5" T.C. x 1/2" FPT (1) Stainless 1/2" MPT x 5/8" Barb Adapter (2) Stainless 1.5" Tri-Clamp (2) EPDM 1.5" Tri-Clamp Gasket (1) Stainless 1.5" End Cap Teflon Tape

Read more less

An all-grain brewing essential, false bottoms lay in the bottom of a mash tun and prevent grain from leaving, allowing the wort to flow freely into the boil kettle. Fits the 16 gallon Brewer's Best® pots and kettles. Specifications 15.5" diameter Stainless Steel Welded legs

Read more less

An all-grain brewing essential, false bottoms lay in the bottom of a mash tun and prevent grain from leaving, allowing the wort to flow freely into the boil kettle. Fits the 8 gallon Brewer's Best® pots and kettles. Specifications 11.5" diameter Stainless Steel Welded legs

Read more less

Traditional ratchet style presses are made with a pressed steel basin with an enamel coating. The basket staves are made of a hardwood and fastened with chrome plated bolts. Baskets are in 2 pieces for easy disassembly and removal of pomace. Also included are 6 hardwood blocks and two hardwood half-rounds to more efficiently and effectively press grapes and extend the reach of the ratchet. These presses come with a removable shaft which has a large nut on the bottom of the basin. The ratchet mechanism allows you to exert more pressure on the grapes than would be possible with a simple screw mechanism. The "number" (#) of the press refers to the diameter of the basket in centimeters. There is no direct relationship between the diameter of the basket and the capacity in gallons or the number of pounds of grapes it can hold.#35 specifications: Basket diameter: 14 inches Basket height: 19 inches Basket capacity: 13 gallons Manufacturer: Fratelli Marchisio (Italy) Due to size and weight, this item is available for pick-up only.

Read more less

Premium, compact immersion chiller made with 25 feet of 3/8", USA made copper tubing. It is intended to chill up to five gallons of hot wort in under twenty minutes.  Specifications: (2) 5' lengths of clear vinyl tubing (3) strong stainless steel hose clamps (1) 3/4" heavy duty female swivel garden hose fitting Chiller dimensions: 9" coil diameter 7.5" coil height 20" inlet/outlet height

Read more less