Equipment

For use with an in-line plate filter. These pads will provide between .3 - .5 Micron filtration. This pad is the right choice when you want to promote sterility in the bottle, although do please note that the pad does not remove 100% of bacteria - only an absolute rated .45 micron or less cartridge filter can do so. Then why do we sell this pad? Some experienced winemakers who are familiar with their wine and who do not have a cartridge filter use this pad to remove most ml bacteria, making it less likely that an unwanted ML fermentation takes place in the bottle. Each filter pad set is good for approximately 5 gallons of wine when the wine has already been filtered by the polish pads. These pads are disposable.

Read more less

Replacement 4" Burner for Bayou Classic burners.   Model: AL10 4" Burner 9" Length No-Rust Cast Aluminum

Read more less

Replacement O-ring for 10" filter housing unit.  Prop 65 Warning: This product contains a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.

Read more less

The Spike Brewing insulated FLEX jacket uses high quality, extra thick, yet flexible neoprene material to insulate your FLEX from the worst ambient conditions like a hot garage or cold basement. Each custom designed, hand stitched (in the USA) jacket is custom tailored to fit the FLEX. This jacket was designed by a former Lululemon designer because if you're going to cover up shiny stainless steel it better look amazing. We think she did the trick!   Specifications: Sewn in the USA (of imported fabric from Japan and China) Reinforced stitching around all ports, legs and handles for extra strength Helps maintain stable fermentation temps regardless of ambient conditions Stops the tank from ‘sweating’ in warm weather Interior Velcro for attaching the optional heater Machine washable Detailed TC-100 product guide:Product Guide.pdf 

Read more less

Allows you to connect additional Conical Fermenters to The Grainfather Glycol Chiller. Includes: 2 x Cooling Connection Couplers  2 x 2 m (6.5 ft) insulated hoses 

Read more less

Get brewing with the 16 Gallon Brewer's Best Basic Brewing Pot! From the Brewer's Best® line, this versatile pot can be used as a primary kettle or for heating sparge water. With its 10-gallon batch capacity and compatibility with gas stoves and propane burners, it's perfect for brewing. Specifications: Graduated marking inside and out Lid included No ports Constructed of high quality 201 stainless steel 0.8mm wall and bottom (20 guage) Handles on both sides for easy lifting 15.7" diameter x 18.9" high 8 pounds

Read more less

The HIZO G14 Portable Gas-Fired Pizza Oven is the perfect no hassle solution to cooking the best homemade pizza outdoors. Fold down the legs of the HIZO G14 and tuck the gas hose underneath. Stretch out the carry bag and catch one end in under the adjustable string piece part and pull over the unit like you would a fitted sheet. There are a total of four clips on the underside. In a cross like pattern put the top left clip into the bottom right. Repeat with the top right to bottom left (refer to product photo if needed). This carry bag / storage cover has been hot-seamed stitched together for maximum waterproofing.

Read more less

Master the art of pizza cooking with the ultimate tool—the perforated pizza peel! Spin the pizza for even cooking, lift it higher to flames to cook the top, or shield it from heat to protect the top while the crust cooks Perforations allows heat through to continue cooking the pizza while using the spinner and also allows excess flour to dislodge from the base Perfectly sized for HIZO Pizza Ovens Learning to use a pizza peel and developing your turning skills in the oven is most beneficial and highly recommended. It will take a bit of practice but using this tool will help you manage your pizza while it cooks—and the results will be well worth it! Pizza peels may come perforated or solid but perforated pizza peels have the benefit of allowing the heat from the pizza stone to cook your pizza as it turns and also allows excess flour to be dislodged from the pizza base. The turning peel can also be used as a handy tool to prevent the top of your pizza from overcooking when needed. You can do this by using the peel to shield the top of your pizza from the flame. The peel can also be used to lift the pizza toward the flame when you need to cook your crust or when your base has cooked but your crusts have not. This procedure allows you to manage the cook of your pizza with more precision. With some practice, learning to use a turning peel will give you the opportunity to cook your pizza with more precision against the heat. It will also allow you to turn your pizza without burning your fingers and misshaping your round pizza. Plus, don't forget the handle length of your peel. If you are using a pizza oven with a flame close to the front of the oven, you will need to use a long-handled peel to protect your hands. The size of your pizza oven and the pizza itself will determine the size of your peel. This 8" pizza peel is perfectly sized for the HIZO Pizza Oven. Approximately 8" round and 24" long.

Read more less

Thermowell for Speidel plastic fermenters. Fits under the lid seal and locking nut.

Read more less

The straight quick connect fittings allow you to increase the length of the Spike Brewing insulated tubing. This insulated glycol tubing is sold in increments of 6ft. If you need to increase the length of tubing, this is your solution. Specifications: 1/2" to 1/2" connections 2 fittings included per purchase (enough to connect 2 lengths of the Spike Brewing insulated tubing)

Read more less

Spike Brewing's TC-100 temp control system will manage both cooling and heating of your FLEX. The digital controller's temp probe inserts into the included thermowell that attaches to the secondary port of the FLEX. Also included is a specially fitted neoprene jacket which features reinforced port holes to reduce the chance of ripping during install. Lastly, (and maybe the coolest item) is Spike Brewing's special insulated tubing. This greatly reduces tube cooling losses and will prevent your cooling lines from sweating all over your floor during the dog days of Summer! Cooling:When the temp in the FLEX rises above the set point of the controller, it will turn on the pump submerged in your cold water reservoir (bucket of ice water, aquarium, glycol chiller, DIY AC chiller, etc). This will pump cold water/glycol through the temp control coil, which mounts to the lid, cooling your beer until it reaches the controller set point. Heating:When the temp in the FLEX falls below the controller set point the optional heater will kick on warming the unit up to the desired temp. Detailed product guide:Product Guide.pdf TC-100 Package:-Digital temp controller (manages heating and cooling)-Insulated tubing-Temp control coil-Thermowell-Neoprene Insulated Jacket-Submersible pump-Temp Coil Quick Connect Fittings TC-100 + Heat Package:-TC-100 Package (above)-Optional heater (for us northern brewers)  Limited availability in store.  Drop ships from vendor.

Read more less

This stainless thermometer features a 3" face, a 6" probe, and a high temperature food grade silicone gasket. This thermometer works great for mash tuns.

Read more less

Replacement tip for 1/2" racking cane

Read more less

The Mini Oxygen Regulator is the perfect tool for brewers to oxygenate their wort and improve fermentation. This regulator features an integrated gauge and easily connects to a refillable O2 cylinder, allowing you to oxygenate your beer with precision. Get your yeast off to the best start with the Mini Oxygen Regulator! Features: CGA-540 connection 0 - 4 LPM flow range with 1/16th increment Barbed outlet

Read more less

This sparge assembly features a sturdy base that will handle a mash tun with up to a 20" diameter. The setup is adjustable and includes a spray wort aerator which gently disperses your sparge water over your grain bed.  Works great with cooler mash tun systems! Instruction Sheet

Read more less

Using compressed oxygen is one of the best ways to aerate wort. It's quick, easy, and limits the risk of contamination. This brass covered oxygen regulator fits most commonly available oxygen tanks, and has a convenient barb fitting for your outflow tubing.

Read more less

50 GALLON SPIKE+ BREW KETTLE Introducing Spike Brewing's new Spike+ line of kettles! Spike+ is just that, an improvement on an already great platform. The Spike+ line draws from the pro side of brewing with the standard use of tri-clamp (TC) fittings. TC fittings do not have any threads and use a gasket and clamp which allows for quick attaching/detaching of fittings. The Spike+ line is for the most serious homebrewers! While designing the setup of the kettle, Spike Brewing offset the ports on these kettles, so you have ample room to use our butterfly valves, or other accessories, with ease. Kettle Features: 15 – 32 gallon batch 304 (18/8) stainless steel  Sanitary welded coupler design (done at Spike Brewing's facility in Milwaukee, WI) 1.5mm thick walls (thickest on the market) 6mm tri-clad bottom (induction capable) Internal volume markings Polished finish 23.6¨ wide by 27.1¨ tall Domed bottom design Bottom coupler 2" off the bottom (4 gallon mark) Top coupler 4" off the bottom (8 gallon mark) Staggered design keeps the top port submerged with half batches Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store.  Drop ships from vendor.

Read more less

36" stainless steel wand with a 2 micron diffusion stone.

Read more less

Making homemade pizza in your kitchen oven is a tasty and rewarding endeavor, but nothing matches the performance and results you get from a purpose-built pizza oven. Kitchen ovens generally max out around 550°F whereas pizza ovens can reach as high as 1,000 degrees. The ideal way to cook pizza is quickly and at very high temperatures in the 800-900°F range, so if you want to take your homemade pizza game to the next level, a gas-fired pizza oven is the way to go! The HIZO G14 Portable Gas-Fired Pizza Oven is the perfect no-hassle solution to cooking the best homemade pizza outdoors. Heats up to 932°F and cooks a pizza in only 1 to 2 minutes. Propane powered and ready to use straight out of the box with no bolts or tools required for assembly. Complete with dialed control and gas igniter included as standard—no batteries or matches required! Setup and packing away couldn't be easier thanks to the four stable folding legs. Includes: HIZO G14 Pizza Oven Liquid Propane hose and regulator Dual Scale Temperature Gauge: 32°F - 932°F (0°C - 500°C) Ceramic Pizza Stone: 14" x 14" x 3/8" Instructions

Read more less

Speed up heating times with the Heat Exchanger Dish (HED) for Gen 4 BrewZillas. Due to the concave bottom and central draining hole, the wort being recirculated through the pump will pass through the malt pipe and then down through the boiler false bottom. The wort would normally then follow the path of least resistance, making a b-line for that drainage hole. What this Heat Exchanger Dish does is force that recirculating wort up to the edge of the BrewZilla base and pass over the elements for a longer period, this then aids in faster heating exchange with the wort, which can help you on a brew day reach those temperatures much quicker. For use with the Gen 4 65L BrewZilla. It is not compatible with any previous generations of BrewZillas or DigiBoils. The HED has been pressed into a slight concave shape to match the curvature of the boiler false bottom. Includes a longer eye bolt assembly than the one included with the false bottom. NOTE: The order of bolt to washer to nuts goes as follows. Eye bolt, washer, false bottom, washer, nut, HED, then wing nut. This is so that the eye bolt does not come completely removed when and if you clean underneath the Heat Exchanger Dish.

Read more less

200 pack of 8 micron filters for the Super Jet.

Read more less

Replacement prefilter for Super Transfer pump. The redesigned pre-filter is easier to remove and reattach with the need for tools, and fully disassembles for cleaning. Fully compatible with pre-2020 Super Transfer pumps that came with the original pre-filter.

Read more less

Push button start, auto stop, gravity fed, packaged with instructions. A great addition to any wine-maker's toolkit. Requires 5/16" or 1/2" ID tubing, which is not included.

Read more less

Used with the 10" filter housing to ensure a tight seal.

Read more less

Extra fast filling, w/ clean side suction siphon starter, wide diameter hose, auto-shutoff and non-agitating. 6 ft x 3/8" ID tubing with stainless steel bendable support rod inside the tubing is included along with anti-sediment tip.

Read more less

Three pack of .5-1 micron filters for the Mini Jet. 

Read more less

Perfect for small batch brewing, where you can test different beer styles or recipes and have more varieties of beer on the go.The Micro Pipework is perfect for brewing 2.6 gallon beers, or standard batches of a lower ABV beer with a small grain bill.

Read more less

Replacement bladder for 40l Speidel Bladder Press. Also fits the Kegland 40l press.

Read more less

Bladder presses are a simple and highly effective way of extracting juice from apples, grapes or other pitless fruit to make cider or wine. Pairs perfectly with the Electric Apple Grinder. Speidel was the original manufacturer of the bladder press. While similar to the Italian models in operation, Speidel offers a few quality upgrades. To obtain a better press Speidel uses a slotted screen, similar to what is offered on large commercial presses, instead of a screen with circular perforations. Speidel presses also offer superior hardware and a recessed valve assembly (to reduce accidental breakage). Insert bag and outer splash guard included. Compared to other presses, the Speidel hydro press has a higher juice yield (~65-70%) and works completely without electricity and with minimal effort. This press can be used with any domestic water supply the provides at least 2.5 bar (36 psi) of pressure. Pressing pressure and pressing time is simply regulated by the water flow. These units are extremely easy to care for and can be cleaned quickly by simply spraying it down with a hose after use. You will find the quality you'd expect from a product that is 100% German-made. Overall height is 33" and outlet height is 12".  A press cycle for this unit averages around 35 minutes. Includes: Complete press assembly Inner mesh bag (to keep fruit from getting in the stainless basket and make cleanup easier) Plastic "spray-protection bag" to keep juice from squirting out Fittings to connect garden hose Instruction manual Presses ship in a corrugated box. Minor assembly (attaching legs) is required before use 1 Year Warranty on all parts! FAQ: Can the press be operated with air pressure? No. These are hydraulic presses that may only be operated with water. When operating with compressed air, there is a risk of explosion and a very high risk of injury if the membrane bursts due to excess pressure or damage. Is a minimum water pressure required? In order to ensure the function and the best possible yield, there should be a minimum water pressure of 2-2.5 bar on the press. What if the water supply delivers more than 3 bar? In principle, this is not a problem, as if the water pressure inside the press exceeds 3 bar, the pressure relief valve opens and there is no pressure-related damage. How many apples make how much juice? On average, 50kg (110 lbs) of apples produce around 30-35L (8-9 gal) of juice, depending on the variety and quality of the apples. California Recipients: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov Due to size and weight, this item is excluded from any flat rate / free shipping offers.

Read more less

Small size coarse mesh straining bag made from nylon.  Very useful for separating fruit pulp in your country fruit wines. Specifications: 10" x 23" 600 micron mesh

Read more less

The Grainfather G30³ is the original all-in-one electric homebrewing system and three-time winner of Craft Beer & Brewing Top Brew Gear of the Year in 2019, 2020, and 2022. Compact and simple to use, with a small footprint for brewing indoors the Grainfather G30³ v3 provides a home brewery system that with superior design, innovative features and the latest technology, allows you to brew professional quality craft beer at home. The Grainfather G30 v3 is your all in one brewing system, to make beer from grain. The sleek look, user friendly, intuitive design, and innovative features, make this your perfect brewing companion for both experienced and beginner all grain brewers. It is made from high quality 304 grade stainless steel with a 8 US Gal capacity, designed to make up to 6 US Gal of beer from one brew. New Features on the G303: 1. ) Auto Reset Switch Lifting and reaching underneath the boiler to reset your electric homebrewing system is now a thing of the past! The new auto reset switch avoids needing a physical, manual switch to reset the system; ensuring homebrewers can quickly and easily resume their brew day if an unexpected reset is required. 2. ) Grain Basket Assembly The newly redesigned Perforated Edge Grain Basket on the G303 features side wall perforations to improve wort flow and to prevent a stuck mash. In addition to the redesigned grain basket, the new Rolled Edge Mash Plate filters the wort efficiently without warping. The new rolled edges mean that there is no need for silicone seals, making the plates much easier to install, remove, and clean. The new grain basket and mash plate design means that there is no need for overflow pipework or a top plate, allowing for a hassle-free brew day. Same Great Features: Benefits of Electric Heating The Grainfather is electrically powered and designed to be used indoors. No need for burners, or hot plates, just plug in and go! It is fitted with a controlled heating element so that the correct power can be used depending on what stage of the brewing process you are at. A gentler heat is used at certain stages for accurate temperature control and and to minimise the risk of scorching and after the mash it can also ramp up the heat quickly for when more vigorous heating is required. Heating from mash to boil takes as little as 20 minutes. Wireless Control for Heat, Power, and Pumping Use the Grainfather G30³ Control Box in conjunction with the Connect App and Grainfather Brewing Community for the ultimate brewing experience. Create your recipes on the Grainfather Brewing Community and then sync these recipes with the Connect app. The control box has Bluetooth connection to your mobile device so it can be controlled remotely. This allows you to multitask or simply relax while brewing and then be alerted when to return to your next step.  Features: PID algorithm works in conjunction with a triac for more stable heating and so you can control power output Programmable step mashing Delayed heating - fill your Grainfather with water the night before and wake up to your water at strike temperature ready for brewing straight away Change between celsius and fahrenheit easily Waterproof graphic display Use in manual mode or with app Grainfather App Ability to import recipes (Beer XML files) - NOTE: iOS9 and higher Set your own boil temperature (for different altitudes) Change between celsius and fahreheit easily Grainfather calculators provided in app Create recipes on the Grainfather Brewing Community and then sync these with the Connect App to brew Powerful Magnetic Drive Pump A 6 Watt, 1,800 RPM magnetic powered pump has been fitted to recirculate the wort through the grain bed for maximum brewing efficiencies. This is also used during the cooling stage to pump hot wort through the wort chiller. The pump also makes the cleaning process quick and easy by pumping the cleaning detergent through all the pipe work. The magnetic drive pump has been selected after rigorous testing of multiple pump styles to ensure it meets the tough demands required of continuous brewing. The pump is concealed by a stainless pump cover, which is easy to pop open, giving you direct access. A pump filter is fitted inside the Grainfather to prevent hops and stray grain from entering the pump or pipework, keeping the wort clear while also preventing any blockages.  Support Grainfather is fully supported around the world by a fantastic support team who love brewing just as much as you do. Our support team is here for any technical enquiries on brewing or how the Grainfather works, as well as general customer service enquiries. All Grainfather G30³ units come with a 3-year warranty.  → Grainfather Warranty Policy PLEASE NOTE: All Grainfather G30s contain a yellow packaging strip in the boiler. This should be discarded before you begin brewing. Specifications 304 Grade stainless steel body 110 - 120V 8 US Gal Capacity Expandable grain basket to suit grain bills up to 20 lb A robust magnetic drive pump (6 watt, 1800 RPM) Tempered glass lid for maximum durability, heating efficiencies and visibility during your brew day. Clips to easily convert your Grainfather into a home distillery with the Pot Still Attachments  

Read more less

A counter flow wort chiller has two connection points. One side is connected to the Grainfather, while the other is connected to the cold tap water. The hot wort is then pumped through copper inner coil while the cold water is pumped through the outer in the opposite direction, providing instant cooling and heat exchange. The cooled wort can then be pumped directly into your clean, sterile fermenter. This reduces the chance of contamination as nothing is inserted in the wort, and it is only passing through the wort chiller one single time, going straight to the sterile fermenter where the yeast is added. 23 L of wort can be cooled in as little as 20 minutes. The cooled wort temperature will be cooled to approximately 5 degrees above whatever your tap water temperature is. 

Read more less

Ball Valve hardware pack for the BrewBuilt Brewing Kettle with 2 x tri-clamp ports. Includes ball valve and hardware for connecting tubing at the kettle's bottom port. End cap included to seal the top port if a thermometer or other accessory is not in place. Includes: (1) Stainless 1.5" Tri-Clamp 3-Piece Ball Valve (1) Stainless 1.5" Tri-Clamp x 1/2" Barb Adapter (3) Stainless 1.5" Tri-Clamp (3) EPDM 1.5" Tri-Clamp Gasket (1) Stainess 1.5" End Cap

Read more less

Thick neoprene jacket for the 65 L Brewzilla or DigiBoil. This jacket will fit Gen 3.1.1 and older BrewZilla models. Note: This jacket is not compatible with Gen 4 BrewZillas. Features: 10% faster heat up time 50% less heat loss from boiler Fits the 65 L Brewzilla and DigiBoil Made from thick neoprene which is also easy to wash after use Put it on to speed up heating; take it off to speed up chilling Kegland Part Number: KL08921

Read more less

The Brewer's BeAst® 16 gallon brew kettle with ports is a perfect choice for intermedieate and advanced brewers. Perfect for full boil brewing, small scale mashing or brew in a bag! The Brewer's BeAst® kettle is a perfect upgrade from the basic brew pot or brew kettle. Fetaures two threaded ports that allow for easy attachement of ball valves, a temperature guage or other accessories. This kettle is ready to be customized as you see fit. Great for use on gas stoves, propane burners or even inductions style stoves. Specifications: Graduated marking inside and out Lid included Two welded 1/2" npt threaded ports Tri-clad 4mm induction ready bottom 1.0mm walls Silicone dipped handles 15.7" diameter x 18.9" high

Read more less

For use with the 35L BrewZilla Boiler Extension Kit. It does not come with an extra Wire Malt Pipe Support Ring. If you're using the extended malt pipe with the 35L DigiBoil, you will need to purchase the ring separately. If you're using the malt pipe with the 35L BrewZilla you can either move your ring up to the boiler extension, or buy an additional ring so you can remove the malt pipe in two steps. You will also need the Recirculation Arm Extension to continue using the BrewZilla's recirculation arm. Compatible with Gen 3 and Gen 4 BrewZillas.

Read more less