Draft Supplies
KOMOS Regulator Diaphragm and Seat Assembly
Over time the internal diaphragm can wear out and result in drifting pressure or a slow leak through the regulator body. Replacing the diaphragm is usually the best path to the fixing these issues so your regulator can return to holding consistent pressures. Compatible with both the single and dual-body KOMOS regulators.
$9.90
Premium Plus Regulator Service Kit
Rebuild a Micro Matic Premium Plus Series Regulator with this 7-piece service kit. Includes the disassembly torque tool. Included: (1) Tamper evident cap (1) Cartridge bolt (1) Lock ring (1) Diaphragm (1) O-Ring (1) Disassembly torque tool (1) Instructions
$39.99
Duotight 8mm Inline Plastic Regulator
These regulators work great for reducing your main pressure from 0-150 psi. Suitable for both gas and liquid. The 8 mm Duotight inlet and outlet are compatible with EVABarrier tubing. Specifications: Pressure Range: 0–150 psi Suitable for mains water pressure Liquid and gas compatible Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Wall mountable Made from non-corrosive acetyl, nitrile, and stainless parts
$10.50
Wall Mount Flange
Shank mounting flange, 2" diameter, with 1/4-20 set screw.
$10.99
Regulator Bonnet Gasket
Replacement bonnet gasket for regulator. 2" outer diameter.
$3.50
Duotight BlowTie Diaphragm Spunding Valve
The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style spunding valve is much more accurate than the poppet style. 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing. The blow off pressure can be set by either pairing the BlowTie with the Push-In Pressure Gauge, or by attaching it to an empty keg that has been pressurized to the desired psi. Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends 0-40 psi pressure rating
$16.50
24'' Wall Shank Assembly
24" beer shank assembly allows you to dispense thru a wall. Chrome plated brass, bore ID 3/16”, thread size 5/8”- 14BSP.
$39.99 $24.99
2'' Flat Seal, Regulator Repair Kit
Regulator repair kit for 2" diaphragm Taprite co2 regulators (series 740, series 1660, series 5260, series 5740). Includes diaphragm, capsule, and flat tank seal.
$19.99
Connector Nipple, 2" x 1/4" NPT
This brass nipple is 2" in length and has 1/4" NPT, right hand threads (rht). It is commonly used for connecting regulators and air distributors/manifolds.
$4.99
Pressure Gauge
This pressure gauge can be used while pressure fermenting, briting or pressure transferring. Specifications: 0-30psi 2" Dial 1/4"npt **This accessory is to only be used with the FLEX+ or the upgraded high pressure lid**
$15.00
3'' Chrome Plated Cooler Wall Shank
3" chrome plated special cooler wall shank with 1/4" x 3/8" bore. Specifications: Finish: Chrome PlatedBody: Material BrassLength: 3-1/8"Bore ID: 1/4" x 3/8"
$17.99
Faucet Shank Locking Ring
Faucet shank locking ring
$0.50
Tank Plug, Liq/Ball (Wood/Old-Fire)
Fits John Wood and old style Firestone ball lock tanks. Thread size 3/4 - 18, plastic insert included.
$24.00
Pin Lock Body Connect 3 Pin Liquid-Out
Liquid out pin lock (3 pin) body connect. 19/32" - 18 pitch thread.
$14.95
Keg Spear Locking Disc
Locking disc for Sankey D type keg spears. Sankey D Spear Exploded View
$4.95
Firestone / Challenger Ball Lock Gas Post
- Tank Plug, Ball-Lock (gas)- For Firestone V & VI Challenger and Super Challenger Tanks- 9/16 - 18 Thread size- Plug includes Poppet and O-Ring.
$19.95
Corny Lid Boot (Cap), A.E.B
Helps protect your keg from scratches from your lid.
$0.75
Faucet Lock, Wrap Around, Fits Perlick
Specially designed lock to fit Perlick taps. Secure unauthorized beer handling with this beer faucet lock. The U hasp wraps closely around the faucet tap handle and beer inlet. This leaves no space to move the handle. So can’t open the faucet and hence no beer flows out either. Lock made of Chrome plated Brass and comes with two-set alike keys. Use with Perlick taps only. Chrome plated Brass lock with 2 alike keys set Locks the tap handle to the faucet body in close position. Cannot move and open the tap with the lock around. Eliminates underage access to your draft beer setup. Tamper proof and extremely easy to install and remove. Also fits stainless steel Intertap faucets
$36.95
Gray Cap Plug CMB Disconnects
Replacement gray cap plug for CMB ball lock disconnects.
$1.25
Check Valve for Party Pump
Replacement check valve for Micro Matic party pumps. For Micro Matic HP-100, 300, 500, 700 & 900 series pumps.
$2.49
Intertap Standard Stainless Steel Spout
Standard stainless steel spout replacement for Intertap and Nukatap faucets.
$6.60
Probe Washer, European & Perlick Couplers
Replacement probe washer for Perlick and European style couplers.
$2.99
Perlick Ball Retainer
Ball retainer for Perlick couplers.
$1.95
Long Body Faucet, 304 Stainless Steel
Taprite's Long Body Faucet is not only stylish but extends beyond and below standard beer faucets, allowing you to maximize the number of taps in your wall or tower. The 304 stainless steel interior will not errode or leach metallic flavors into your beer, wine, cider, or kombucha. The 304 stainless steel exterior is highly polished for a sparkling, mirror finish. Stainless shank assembly (2.5"), and black faucet handle are included.
$99.95 $79.99
Hanger Bolt - 5/16 in for Ferrule
Make your own wooden tap handle using this hanger bolt and a faucet tap ferrule. Attach your handle onto the wood screw side and thread the ferrule onto the finer threaded side. Then just attach the assembly onto your faucet. 5/16”-18 thread, total length is 1 1/2” - 1 3/4”.
$1.30
Flow Control, Self Closing Stainless Steel Faucet
Taprite's Variable Flow Control Faucet allows you to adjust your beer flow with a lever right on the faucet, eliminating foaming problems when your beer lines, temperature, or pressure cannot be adjusted to account for multiple beer styles. The self closing feature prevents the accidental loss of beer. The 304 stainless steel interior will not errode or leach metallic flavors into your perfectly poured beverage. The 304 stainless steel exterior is highly polished for a sparkling, mirror finish. Stainless shank assembly (1.75"), stainless in-line compensator, and black faucet handle are included.Special Features: Flow Adjustment Lever, Self Closing, In-Line Flow Control Compensator, Stainless Steel Shank IncludedFaucet Material: Stainless Steel, 304Flat Mount Recommended
$114.99 $89.99
Faucet Spout Extension
Used to convert a U.S. faucet spout to European style faucet spout. Helps to reduce foam Pours faster Fits snug in standard US tap spout Faucet not included.
$15.99 $9.99
Bass Tap, G System
TOF® Import Beer Keg CouplersTOF® has been certified ISO 9001 since 1997 and produces quality keg couplers For use with but not limited to: Watneys Anchor Fuller's Features G-System Coupler Brass Body NSF 61 Galvanic Food Coating INOX AISI 300 S/S Probe Pressure Relief Valve Will also fit:Abbot AleAnchor Liberty AleAnchor PorterAnchor SteamBass Pale AleBlackthorne CiderCaffrey'sFuller's ESBFuller's London PrideGrolschOld Speckeled HenRougeScottish TennentsSir Perry William'sWatney'sYoung'sYoung's Chocolate StoutYoung's Oatmeal StoutYoung's Ram Rod BitterYoung's Special London Ale
$79.95
EVABarrier Double Wall Draft Tubing - 3 mm ID x 6.35 mm OD | 39 ft. Roll
EVABarrier double wall tubing is an excellent choice for all draft dispensing applications. The inner barrier is an excellent gas barrier, keeping oxygen out and CO2 in. The inner wall is also extremely smooth to prevent bacteria and other microbes from attaching to the inside surface. The outer barrier gives the tubing a decent stiffness while still remaining pliable. This makes EVA Barrier remarkably kink resistant and the perfect choice for use with Duotight, John Guest, and other push-in fittings. The 3 mm (5/32") ID size is perfect for mobile draft applications or home draft systems where only a short beverage line is needed. Lengths of 3.2 ft. per line are all that you'll need for adequate flow resistance.' This tubing works seamlessly with Duotight Gas In and Bev Out Ball Lock QDs which allow you to connect your draft lines directly to your ball lock homebrew keg. Be sure to select the correct size QD fittings that correspond to your tubing's outer diameter (OD). Specifications: Inner Diameter - 3 mm (1/8") Outer Diameter - 6.35 mm (1/4") PVC, BPA, and Plasticizer Free* Stiff outer wall is kink resistant and easy to use with Duotight fittings Smooth inner wall prevents oxidation, CO2 loss and microbial growth build-up *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects.
$21.00
Push-in 9.5 mm (3/8 in.) Check Valve
Compatible with EVABarrier 9.5 mm OD tubing. It has a low opening pressure of 1 psi, and since it cannot be opened or taken apart, it is recommended for gas applications only. The internal components are made from stainless steel. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Made from food-grade acetal plastic Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$7.99 $4.99
Duotight Push-In Fitting - 9.5mm (3/8 in.) Female Bulkhead
This Duotight fitting is designed to go through the wall of a tank, housing, or wall, similar to a pass through shank, so you can run EVABarrier tubing from one side to the other. Compatible with EVABarrier 9.5 mm OD tubing. With the lock nuts in place, there is approximately 1" of pass through threading. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals.
$3.90
Monotight Push-In Fitting - 6.35 mm (1/4") Female x 6.35 mm (1/4") Male Elbow
The Monotight Elbow Piece is suitable for 6.35 mm (1/4") PE tubing or most lines with a 6.35 mm outer diameter. It is designed for use with stiff PE tubing that is commonly used in water treatment equipment, water filters, reverse osmosis fittings, and other appliances that are directly connected to water lines. These fittings will not fit 8 mm or 9.5 mm OD EVABarrier line Monotight push in fittings have been engineered for maximized performance in both gas and liquid applications. No other push ins on the market have EPDM o-rings. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-ring made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals.
$2.00
Co2 Disconnect Tailpiece
If you use different kegs and couplers on a normal basis, save time by add quick disconnects to your draft systems gas line tubing. Place a quick disconnect fitting in the gas line and no tools are needed to disconnect from the gas source. Simply pull back the sleeve on the female side and the connection separates and the gas is shut off. Note: To make a complete set please order the Disconnect Air Coupler. Specifications: Connection: Male Side Length: 1-1/4" Barb: 3/8" O.D. (to fit 5/16" I.D. Gas Hose) Material: Brass (not chrome plated)
$9.99
Stainless Steel 6''x5'' Drip Tray, no drain
Surface mount drip tray without drain. Stainless Steel 6" x 5" Made in USA
$24.99
Pin Lock Socket
13/16" socket with cut outs for your pin lock keg posts.
$19.99
Grommet for 5/16'' ID SS Tubing
Rubber grommet for chrome plated brass ferrule with 5/16" ID bore.
$1.95
