Draft Supplies
Inlet Co2 Filter
The inlet Co2 filter helps to filter out contaminates from Co2 Gas. Inserts inside the Micro Matic Premium Regulator inlet stem.
$2.00
Beer Nut Inlet Seal
Beer Nut Inlet Seal for Micro Matic Premium 640 Series Regulators.
$2.00
3-1/8″ Standard Wine Shank – 1/4″ Bore I.D
This 3-1/8" shank is made of 316 surgical grade stainless steel making it more resistant to the acidic nature of wine. Includes: 3-1/8" 316 stainless steel shank with 1/4 bore Forged brass lock nut Black plastic flange Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. Made in India
$16.99
2-1/8" Shank Assembly - Stainless Steel
Stainless Steel Beer Faucet Shank Assembly - 2-1/8"L with 1/4" Bore. Made of 304 stainless steel, this NSF certified shank can be used for any beverage. A high-end shank is crucial to serving up perfectly fresh beverages from a draft faucet. The stainless steel beer faucet shank assembly is inserted through your refrigerator or house wall. On one end, inside the fridge, you attach the beverage lines. On the other end, the shank is connected to your draft faucet. This Micro Matic, NSF-certified beer shank is made of 304-grade stainless steel and is excellent for any beverage. The shank assembly uses Micro Matic's SpinStop™ technology, a simple solution that stops the spin and keeps the faucets upright. Includes the flange, coupling nut, and lock nut necessary to attach it to the draft tower and faucet. Designed with 7/8"-14 (5/8" BSP U.S. Beer Industry Standard) straight pipe thread, this shank will work with all North American faucets. If you're using equipment from outside North America, you'll need to source a specialty shank. STAINLESS STEEL SHANK FEATURES The best in purity - only 304 stainless steel touches the product Complete assembly Connects beverage lines to the faucet Excellent for any beverage Highly durable Micro Matic's SpinStop™ technology – keeps the faucets upright Fits on North American faucets NSF certified Specifications Use: Dispensing Wine / Cider / Beer Length: 2-1/8" Bore I.D.: 1/4" Material: 304 Stainless Steel Approval: NSF Certified
$30.99
3-1/8" Beer Shank Assembly – Chrome Plated Brass
Beer Shank Extension Faucet Assembly - 3-1/8"L with 1/4" Bore. This Micro Matic, NSF-certified Beer Shank Extension Faucet Assembly is made of chrome-plated brass and is excellent for both home and commercial bars. The beer shank assembly uses Micro Matic's SpinStop™ technology, a simple solution that stops the spin and keeps the faucets upright. The assembly includes the flange, coupling nut, and lock nut necessary to attach it to the draft beer tower and beer faucet. Designed with 7/8"-14 (5/8" BSP U.S. Beer Industry Standard) straight pipe thread, this shank will work with all North American faucets. If you're using equipment from outside North America, you'll need to source a specialty shank. A high-end beer shank is crucial to serving up perfectly fresh beer from a draft beer faucet. The beer shank is inserted through your refrigerator or house wall. On one end, inside the fridge, you attach the beer lines. On the other end, the shank is connected to your draft faucet. Features Complete assembly Chrome-plated brass Connects beer lines to the faucet Micro Matic's SpinStop™ technology – keeps the faucets upright Highly durable Fits on North American faucets NSF certified Specifications Length: 3-1/8" Bore I.D.: 1/4" Thread: 7/8"-14 (5/8" BSP) (U.S. Beer Industry Standard) Material: Chrome Plated Brass Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
$19.99
1/4" x 1/2” Splicer - Stainless Steel
Beer line 1/4" x 1/2" stainless steel barbed splicer. Splices 3/16" I.D. Vinyl to 3/8" I.D. Vinyl 3/16" I.D. Vinyl to 1/2" I.D. Vinyl 1/4" I.D. Poly to 1/2" I.D. Vinyl Specifications Type: Straight Connectors Material: 304 Stainless Steel
$3.99
1/4" Barbed Ball Valve
Plastic ball valve with 1/4" barb fittings on each end.
$9.99 $6.99
Stainless BSP Washer - 3/8 in.
Stainless steel 3/8" BSP washer.
$3.30
Snap Clamp for 1/4" ID Draft Tubing
Plastic snap clamp for 1/4" I.D. vinyl draft hose.
$1.00
Tower Cap, 3''
Draft tower cap assembly for 3" diameter towers, chrome plated
$6.95
Economy Series Regulator Repair Kit
Rebuild a Micro Matic Economy Regulator with this 3-piece repair kit. Includes: Pressure Plate 2" Diaphram Seat Capsule Assembly
$14.99
Pressure Gauge, 0-120 PSI
Pressure gauge, 0-120 psi, 1/4" npt bottom inlet, right hand threads.
$13.99
Pressure Gauge, 0-15 PSI
Replacement low pressure gauge for Co2 regulator. Looking to dial in your dispensing pressure? The maximum reading on this gauge is 15psi allowing you to adjust to that perfect pressure. 0-15 PSI 1/4" NPT bottom inlet Right hand threads
$14.99
2" Connector Nipple - 1/4" NPT
Use to connect secondary regulators 1/4" NPT x 1/4" NPT Right hand thread
$6.99
RHT Hex Nipple, 2.5" x 1/4" NPT
This brass hex nipple is 2.5" in length and has 1/4" NPT, right hand threads (rht). It is commonly used for secondary regulators.
$6.99
6-1/8"' 304 Stainless Steel Shank Assembly
6-1/8" stainless steel shank assembly for dispensing beer, wine, cider, or kombucha. Wall flange is a black plastic material. Specifications: Length: 6-1/8" Bore ID: 1/4" Thread: 7/8"-14 (5/8" BSP) Material: 304 stainless steel shank
$48.60
Mini CO2 Regulator
Portable, mini, two stage co2 regulator with a range of 7-21 PSI. This regulator uses 74g cartridges and provides constant pressure to your vessel. Cartridges not included.
$74.00
Low Pressure Back Mount Gauge
A 0-15 lb low pressure, 1/4" thread back mounted pressure gauge commonly used on spunding valves.Please Note: Color/ style of gauge may vary
$13.99
4.5'' Cooler Wall Coupling with 3/8'' Bore
4.5" jockey box wall coupling with 3/8" bore. Material: Brass Finish: Chrome plated brass Length: 4.5" Bore ID: 3/8" Thread Size: 5/8"- 14BSP Important information: Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
$18.99
3'' x 5/16'' Bore Cooler Wall Coupling Assembly, Chrome Plated
3” shank for jockey box. Material: Brass Finish: Chrome Plated Brass Length: 3" Bore ID: 5/16" Thread Size: 5/8" - 14 BSP Important information: Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
$14.99
1/4'' NPT Plug
1/4" NPT plug, left hand threads, Allen socket head, for primary regulators
$1.75
1.6'' Diaphragm Regulator Repair Kit
This kit contains everything you need to service your 3700 series TapRite regulator after years of use. It includes a 1.6" diaphragm, capsule, and tank nipple o-ring which are the most common wear and leak points.
$19.99
Stainless Beer Thread Adapter | 2 pack | Female Beer Thread x 1/2 in. BSP | KOMOS®
Convert draft shanks or keg couplers for use with 1/2" female threaded fittings. Featuring a hex nut exterior for easy wrench adjustments. The female side is standard beer thread which is used on both ports of standard keg couplers and the tail end of draft shanks. Once installed, you can adapt these input/output ports to any 1/2" fittings and valves you might find useful. The 1/2" male BSP end may require teflon tape if used with 1/2" NPT fittings. Comes in a pack of 2
$11.00
Duotight Ball Lock Quick Disconnect (9.5mm) - Gas In
The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world. Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. Enter the Duotight Ball Lock QD. The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably with no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitizing an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings (no cheap ABS plastics here) this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitizers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required This particular ball lock disconnect has been designed for use with EVABarrier 9.5 mm OD Tubing. Due to the integrated Duotight fitting the line will simply push directly into this fitting. Ball Lock Quick Disconnect - Gas In Direct connect 9.5 mm OD EVABarrier tubing Compact design won't interfere with keg stacking Made from highly chemical resistant materials Disassemble by hand for quick and easy cleaning Duotight Ball Lock QDs are offered in three sizes that correspond to the outer diameters seen on our line of EVABarrier Draft Tubing. 6.35 mm OD – features a very tight 3 mm ID that requires only 3.2 ft of length for adequate flow resistance. This is the ideal size for mobile draft or if you want to keep your kegerator as tidy as possible. 8 mm OD – the most common OD size of EVABarrier tubing. This size comes in two IDs (4 mm & 5 mm) and pairs up with the lion's share of Duotight fittings and accessories. 4 mm ID is our most recommended size for beverage lines, requiring 5-6 ft. lengths. 5 mm ID is commonly used as gas line or when 10-12 ft. beverage lines are required. 9.5 mm OD – suitable for gas lines or long draw beverage lines. At 6.3 mm ID, this size is ideal for beverage lines that will be 20 ft. or longer in length.
$8.80
Keg Spear Body O-Ring
Keg spear body o-ring for Sankey D and Sankey S type spears. Sanke D Spear Exploded View
$0.95
Insert, Tank Plug, Ball (Old-Fire)
Fits tank plugs for John Wood and old style Firestone Challenger tanks.
$2.50
German Tap, M System
TOF® Import Beer Keg CouplersTOF® has been certified ISO 9001 since 1997 and produces quality keg couplers For use with but not limited to: Veltins Schneider Aventinus Features M-System Coupler Brass Body NSF 61 Galvanic Food Coating INOX AISI 300 S/S Probe Pressure Relief Valve
$79.95
European Sanke Keg Coupler - S Style
Keg coupler (tavern head) for S-system (Euro-Sanke, Heineken) kegs. Includes integrated washer/check valve and nut on the gas in side. Nut, nipple, and washer assembly included for both gas and beer inlet/outlet. Nickel coated body with stainless steel probe. This item does not come with a pressure relief valve.
$45.99
3-Way Beer Manifold
Material: Stainless Steel 304 Mounting Bracket: Integrated Inlet Connection: 1/2" O.D. Barb Outlet Connection: 7/8" - 14 (5/8" BSP)
$69.95 $39.99
Brass Faucet Lever
Brass faucet lever replacement for most standard U.S. draft faucets.
$2.99
Black Cap Plug CMB Disconnects
Replacement black cap plug for CMB ball lock disconnects.
$1.25
Growler Filler - Older Perlick/Perl Faucets Models
304 stainless steel faucet insert with 12 inches of 5/16" ID draft tubing. This insert fits into older styles of Perlick and Perl faucets.
$9.99
Piston Rod O-Ring
Replacement piston rod 0-ring for the Micro Matic 4" and 8" chrome pumps. Dimensions: O.D. 1-7/16" I.D. 1-3/16" x W. 1/8"
$2.49
Sanke Pump Adapter
For use on Sanke pumps. Material: Brass Finish: Chrome Plated Brass Thread Size: 5/8 BSP
$4.95 $3.99
Pump Connector with 3/8'' Hose Barb
Connects any picnic pump to CO2 inlet side of coupler. Material: Brass Finish: Chrome Plated Brass Barb: 3/8" Length: 5/16"
$4.95 $3.99
Faucet Bonnet, Chrome
Faucet bonnet, chrome plated brass.
$1.95
