Draft Supplies
Ball Lifter, For Draft Cleaning Kits, Sanke
Keg Coupler Ball Lifter
$3.00
Micro Matic Co2 Inlet Seal
Nylon CO2 Inlet Seal for Micro Matic Premium Regulators.
$2.00
1/4'' MFL Gas Shut Off Valve
Brass shut off valve with check valve. !/4”MFL x 1/4” NPT
$11.95
Replacement PRV (100 psi)
The most common relief valve. Fits most Cornelius and Firestone style kegs. Long body with spring with gray top and pull ring. Max. pressure rating: 100 psi
$8.80
Co2 Disconnect Nipple with Hose Barb
If you use different kegs and couplers on a normal basis, save time by add quick disconnects to your draft systems gas line tubing. Place a quick disconnect fitting in the gas line and no tools are needed to disconnect from the gas source. Simply pull back the sleeve on the female side and the connection separates and the gas is shut off. Note: To make a complete set please order the Disconnect Air Coupler. Specifications: Connection: Male Side Length: 2" Barb: 3/8" O.D. (to fit 5/16" I.D. Gas Hose) Material: Brass, anodized
$6.99
Plastic Flange, Black
Shank flange, black plastic
$3.99
Hose Tailpiece For 3/8'' ID Tubing
3/8" Hole, 7/16" Barb Shank TailpieceShank Tailpiece for 3/8" ID HoseNickel Plated
$2.00
1/4'' Beer & Gas Tubing QD Set - In-line W/ Shut-off
These disconnects feature 1/4" barbed fittings that will fit into 3/16", 1/4", or 5/16" ID tubing. The temperature range is -40F to 180F and they can handle a vacuum to 120 PSI. The internal valve spring is made of 316 stainless steel and the o-ring is food grade.
$16.99
3-1/8″ Stainless Steel Shank Assembly – 3/16″ I.D. Bore
Manufactured by Krome Dispense, the shank is made from stainless steel 304, is 3-1/8” long and has 3/16” Bore ID. Includes black plastic flange, coupling sleeve, snap ring, and coupling nut. Stainless steel will not impart any off-tastes and will not tarnish like brass or pit like chrome. Stainless is a great choice for all beer, wine, cocktails, or cider. Specifications: Material: 304 Stainless Steel Length: 3-1/8" Bore ID: 3/16" Thread Size: 5/8"-14 BSP Made in India.
$14.49
Snap Clamp for 3/16" ID Draft Tubing
Plastic snap clamp for 3/16" I.D. vinyl draft hose.
$1.00
Handheld Co2 Keg Charger
Portable CO2 charger that eliminates the need for costly CO2 tanks & hoses. Pressurizes any 3 or 5-Gal corny keg. Works on either ball-lock or pin-lock fittings with 1/4" flare connection. Cartridges and connectors are not included.
$24.99
RHT Pressure Gauge, 0-3000 PSI
Replacement regulator pressure gauge 0-3000 PSI 1/4" NPT Right hand threads
$14.99
Draft Beer CO2 Regulator to Nitrogen Tank Adapter
Draft Beer CO2 regulator to nitrogen tank adapter Quickly converts a CO2 regulator into a nitrogen regulator. Converts female CGA-320 threads to make CGA-580 threads. Ideal for occasional use of mixed gas cylinders with nitrogen connection. Material: Brass
$15.99
Neoprene Shank Washer
This neoprene washer seals the shank and opening on the inside a cooler wall. This prevents water and moisture from leaking into the cooler box wall.
$2.00
Beverage Out Dip Tube, Ball Lock Kegs
Curved beverage (liquid) out curved dip tube for 5 gallon Cornelius style ball lock kegs. Stainless Steel.
$18.00
Polished 304 Stainless Steel Faucet
This Micro Matic faucet is designed for performance and built-to-last. The 304 Stainless Steel Faucet delivers on style, purity, and quality! This signature faucet is the most common in the industry, capable of dispensing beer, wine, cocktails, teas, or cold brew. The 304 Faucet is constructed with 304-grade stainless steel contact surfaces, preventing 'off-tastes' for the best beverage purity. The stainless steel body is polished to an attractive, bright finish that won't tarnish like brass or pit like chrome. It's rugged stainless steel lever makes it ideal for larger, heavier faucet handles. Whether you are looking for a faucet for commercial use or for your home bar, the 304 stainless steel faucet is one of the best beverage dispensing faucet on the market. FEATURES A distinctive style that looks great on any draft tower. Highly polished exterior surface for a brilliant chrome-like finish Constructed of 304-grade stainless steel components – won't taint beverage flavors Stainless steel body will not pit or tarnish Dispense a wide range of beers, wine, kombucha, cocktails, cold brew, or any other beverage Stainless steel lever is more durable than brass when used with tall, heavy handles Easy to disassemble and clean NSF certified Faucet fits U.S. specification knobs and shanks Made in the USA 🦅🇺🇸
$52.99
Poppet Valve CMB Disconnects
Replacement poppet valve for all CMB ball lock disconnects.
$1.99
NukaTap Flow Control Beer Faucet Self-Closing Spring - Gen 1
This spring fits the Gen 1 NukaTap only The NukaTap flow control faucet is the world's only forward-sealing flow control tap that can use an auto close spring. By inserting the spring between the flow control device and NukaTap shuttle, the tap will automatically close when you let go of the handle. This is perfect for customers who may not be diligent enough to remember to completely turn off the tap after each pour. Or for those with little kids or pesky cats that knock everything around! This very inexpensive spring can save you from emptying an entire keg and then losing a whole bottle of gas. Please note: this spring is not compatible with the standard non-flow control NukaTap faucet.
$2.20
Stainless Steel Stout Faucet
This stainless steel nitrogen stout faucet will ensure the perfect pour for your nitrogen stouts to give you that creamy mouth-feel that Guinness and other stouts are famous for. Specifications: Material: 304 Stainless Steel Finish: Polished Body Thread: 1-1/8" 18 UNEF Lever Thread: 3/8" X16 UNC Lever Material: Brass Spout Material: Stainless Steel Approvals: NSF Certified Made in India
$75.00
90 degree 3/8" Swivel Elbow
90 degree barbed swivel elbow stem and nut. Specifications: Barb with fit 3/8" ID tubing. Nut is a 1/4" flare fitting. 304 Stainless Steel.
$4.99
Short Ball Plastic Faucet Handle
A shorter style plastic faucet handle with rounded top. Measurements: 2" Tall 1-1/4" Top Diameter 13/16" Bottom Diameter
$2.99
Co2 Disconnect Air Coupler
If you use different kegs and couplers on a normal basis, save time by add quick disconnects to your draft systems gas line tubing. Place a quick disconnect fitting in the gas line and no tools are needed to disconnect from the gas source. Simply pull back the sleeve on the female side and the connection separates and the gas is shut off. Note: To make a complete set please order the Disconnect Tailpiece or Disconnect Nipple with Hose Barb. Specifications: Connection: Female Side Length: 3-1/4" Barb: 3/8" O.D. (to fit 5/16" I.D. Gas Hose) Material: Brass Shut-off: Built in
$16.99
3/8” x 3/8” Splicer - Stainless Steel
Beer line 3/8" x 3/8" stainless steel barbed splicer. Splices 5/16" I.D. Vinyl to 5/16" I.D. Vinyl 5/16" I.D. Vinyl to 3/8" I.D. Poly 3/8" I.D. Poly to 3/8" I.D. Poly Specifications Type: Straight Connectors Material: 304 Stainless Steel O.D.: 3/8" I.D.: 1/4"
$3.99
D System With Chrome Plated Brass Body & Chrome Plated Brass Probe
D system Keg coupler Chrome-plated Body & Probe US Sankey keg coupler to dispense draft beer from the keg. Tap the keg with ease with this lever handle style coupler. Place the coupler base aligned over the valve. Pull the handle out and put down to lock the coupler in this position. You can now enjoy an uninterrupted flow of your favorite beer. D system keg couplers are also called American Sankeys as they work with most North American kegs. USA and Canadian brands, like Budweiser, Busch, Coors Light, Killian’s, Labatt, Michelob, Miller Lite, Milwaukee’s Best, Molson, Moosehead, OV, Pete’s Wicked, Sam Adams use D type keg valves. Both body and probe made of Brass with Chrome plating. Durable and less expensive than SS counterpart. D system keg coupler is the predominant valve system used by most domestic and commercial breweries in the USA. This is a domestic keg tapping device for US local beers that draws beer out from kegs. Use a reliable and durable keg coupler. Choose from the various options and material combinations that suit your needs best. Both coupler body and probe made of Brass material with a layer of Chrome. Durable and built for heavy-duty use in commercial places like pubs and bars. Pressure Relief valve included for safety. Releases overpressure gas at 56 – 65 PSI All Krome keg couplers are NSF approved.
$30.99
KOMOS Neoprene Draft Tower Sleeve
This insulating neoprene sleeve slips over your draft tower to keep your draft lines icy cold. The KOMOS draft tower sleeve was designed to fit the KOMOS kegerators like a glove, but can be used with most 3" and 4.5" draft towers. The sleeve comes without holes so it can be customized to fit your faucet arrangement, whether it be single, double, or triple tap. Made from 7 mm thick neoprene. Installation: Remove the faucets from the tower, keeping the shanks in place Pull the sleeve down over the tower Mark the position of the shanks and use a sharp pair of scissors to cut a hole in the sleeve Stretch the hole over the shanks and reattach the faucets
$11.00 - $15.50
20.5mm Stepless Hose Clamp - 3/4 in. OD Tubing
Stainless Steel, Stepless Oetiker Clamp This style of clamp tightens in an exact circle, making them ideal for use with draft lines. 20.5mm for 3/4" OD Tubing. (17-20mm OD) Stepless Clamp Tool sold separately.
$0.60 - $11.00
Beer Tower Cooler Fan Kit
This tower cooler will help reduce initial use warm beer and foam by blowing cold air up from your refrigerator into your tower. Kit Includes: Fan box 12V power pack Flexible tube
$36.50
KOMOS® Premium Dual Body CO2 Regulator
Send different pressures to two separate kegs from the same CO2 tank with the KOMOS Dual Body Regulator. This industrial gauge regulator aims to be the last regulator you'll ever need. Large dual-body and precision diaphragms provide high flow rates, and pressure settings are quickly and easily dialed in the with hand knobs. The pressure gauges are made from thick stainless steel and come with rubber bumpers for an extra layer of protection. Triple-scale dial faces read in psi, bar, and kPa. Comes with 1/4" flare fitting with barbed outlets. Included Duotight adapters allow the regulator to be easily used with EVABarrier draft tubing. Features: 0–60 PSI operating range Low pressure gauge reads from 0–100 Pull ring PRV rated to blow off at 65 PSI Strong, robust design Highly accurate precision diaphragm Easily adjusted by hand 1/4" flare fitting with barbed outlet Duotight adapter fitting included for use with EVABarrier draft tubing Heavy duty steel gauges with rubber bumpers M6 mounting screw holes Made in accordance with AS 4267 Made in China Warning: This product contains lead and/or lead compounds, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warning.ca.gov
$110.00
Premium Plus Secondary Regulator - Pass-thru
Safely and effectively control the flow of CO2 to a single keg in your draft beer system. Secondary gas regulators reduce pressure from a primary regulator or gas blender and provide this lower pressure to each individual keg. Easily add another carbonated beverage to your existing system with this Premium Plus secondary regulator; the integrated pass-thru bar saves time and provides convenience in the field. For added safety, the integrated pressure relief valve stops the gas flow if the pressure gets too high (55-65 PSI). Premium Plus regulators come standard with a tamper-evident adjustment screw and bonnet, preventing unauthorized adjustment to gas pressure which can cause service issues. FEATURES Adjust pressure from 0 to 60 PSI Built for durability: forged brass body, accurate machining, chrome-plated finish Premium quality metal gauges for durability Tamper-evident adjustment screw and bonnet Enlarged CO2 port for high volume Factory leak tested at 145 PSI Safety relief valve releases at 55-65 PSI Made in the USA Specifications: Performance: 1 Pressure / 1 Product Height: 7-1/4" Width: 3-3/4" Depth: 5-1/2" Output Pressure Gauge: 0-60 PSI, for accurate product pressure Outlet Barbs: 3/8" O.D. (To fit 5/16" I.D. Gas Hoses) Pressure Relief Valve: Safety Pressure Relief Valve Releases at 55-65 PSI Capacity: Safety pressure relief valve releases at 55-65 PSI
$69.99
Gas Manifold Nipple
1/4" brass nipple for expanding a modular gas manifold. Right hand thread.
$5.50
Stainless Steel Shank Flange
Shank flange, stainless steel
$4.99
Intertap Seal Kit
Replacement O-rings for Intertap faucets.
$5.50
O-Ring, Perlick Faucet
Perlick® 425 Series replacement o-ring. Also fits 525 and 575 series faucets.
$0.95
5/16'' Beer & Gas Tubing QD Set - In-line W/ Shut-off
Our quick disconnect locks into place with an audible "click," creating a secure, leak—free seal every time. They also allow quick and easy one—handed disconnections by simply pressing the thumb latch. Micro Matic quick disconnect couplings provide a fast, easy and safe way to incorporate a gas shut—off in your draft beer system. FEATURES One handed operation—no tools needed to connect or disconnect Audible "click" asures your connection is secure High flow valve design for maximum flow in a compact coupling Withstand up to 120 PSI Temperature range -40°F to 180°F (-40°C to 82°C)
$21.99
KOMOS® Nylon Flare Washers - 10 Pack
Nylon flare washers for metal-to-metal 1/4" flare fitting connections. 10 Pack
$5.50
Carbonation Ball Lock Quick Disconnect (QD) Cap Tee Fitting
Make a really small and useful keg system out of PET plastic bottles. Great for taking beer to a party or making your own micro/portable/mini keg system. PCO 1881 threading on all ends. Tee fitting only. Does not include Carbonation Caps or PET growler.
$4.40
