Kegs & Parts
O-Ring Kit for Corny Kegs
Includes O rings for dip tubes, posts, and lid.
$4.00
Keg Lube
Keg lube is a food grade lubricant for rubber and plastic parts. Using keg lube will extend the life of the o-rings on your kegs preventing cracks from developing and leaks from occurring. 1 ounce tube.
$3.99
Used - 5 Gallon Keg, Ball Lock
Used dual handle 5 gallon ball lock Corny keg with new O-ring gaskets. Pressure tested.
$75.00
Universal Poppet
Universal poppet valve fits most kegs.
$3.99
O-Ring - Keg Post
Replacement o-ring for Cornelius keg post.
$0.50
Floating Dip Tube
When using the Torpedo Buoy™ floating dip tube, you can draw the clearest beer possible from the first pint to the last. Included is a 3" metal dip tube, 23.5" length of 1/4" ID silicone tubing, and stainless steel ball float. This floating dip tube is compatible with any ball lock or pin lock homebrew keg. Sized for 5-gallon kegs, but it can be shortened for use with 1.5 or 2.5-gallon kegs. Instructions
$17.99
Cornelius Keg Lid O-ring
Replacement o-ring for Cornelius keg lids.
$2.99
O-Ring - Dip Tubes
Replacement o-ring for Cornelius keg dip tubes.
$0.50 - $3.99
5 Gallon Corny Keg, Dual Handle
New dual rubber handle, ball lock stainless steel keg. Features: 5 gallons Rated to 130 PSI Dry hop tab under keg lid 304 stainless steel NSF certified 24.75" h x 8.375" diameter Imported from China
$119.99
Ball Lock Body Connect - Beverage Out (New)
Replacement corny keg post where the liquid-out ball lock coupler is fitted onto. Includes one o-ring and an universal poppet. 19/32" - 18 pitch thread Fits Cornelius Spartan, Super Champion, and Torpedo kegs. Use a 11/16" deep socket to install
$13.99
Ball Lock Body Connect Gas-In (New)
Replacement corny keg post where the gas-in ball lock coupler is fitted onto. Includes one o-ring and an universal poppet. 19/32" - 18 pitch thread Fits Cornelius Spartan, Super Champion, and Torpedo kegs. Use a 11/16" deep socket to install
$13.99
2.5 Gallon Corny Keg, Dual Handle
New dual rubber handle ball lock stainless steel keg. Features: 2.5 gallons Rated to 130 PSI Dry hop tab under keg lid 304 stainless steel Imported from China 14.5" h x 8.375" diameter
$109.99
Manual Relief Valve
For A.E.B. & Cornelius ball lock tanks
$8.95
KOMOS® Universal Keg Post O-Rings - 10 Pack
Replacement o-rings for ball lock or pin lock keg posts (body connects). 10 Pack
$3.99
Torpedo Ball Lock Keg
The patented,Torpedo Kegs are a new lineup of Stainless Steel Ball Lock kegs. We've taken the features and solid construction of classic ball lock kegs (High Quality welds, pressure reliefs, ball lock fittings & Corny lid) and added a couple more. Laser welded 304 SS construction and rolled Stainless Handles guarantee years of trouble free use. These are stackable kegs, any size stacks on any other size. This means you'll be able to save space in the garage or kegerator, since they can be stacked w/ ball lock fittings attached and serving. Features: 304 SS Construction High Quality Laser Welded Seams ISO9001 Quality Assurance 130 PSI Max Pressure PRV Rating: 85 psi Rolled SS handles make transport easy Stackable kegs - storage or serving Kegs come Boxed individually Kegs are marked with size, material, max pressure, ISO9001, In & out for fittings, & A Max Pressure warning.
$99.99 - $139.99
Cornelius Keg Lid, New
A replacement lid for Cornelius (Corny) and Firestone kegs. Pressure relief valve included. Includes pressure relief valve and lid o-ring (not pictured).
$19.99
Ball Lock Post Bulkhead - Gas In
This gas in ball lock post bulkhead assembly allows you to add a ball lock post just about anywhere. Create your own pressure vessel or attach it to an aluminum gas manifolds for a quick connect option. 1/4" BSP threads and locking nut.
$11.99
O-Ring - Keg Post - Red
Replacement o-ring for Cornelius keg post.
$0.50 - $3.99
Slimline Torpedo Ball Lock Kegs
Torpedo Kegs too wide? Want to squeeze another keg in your kegerator? The patented design, of the new Slimline Torpedo Keg is 9% more slim than the classic model with all the same great features. Coming in at about 1/4" thinner than standard Ball Lock Cornelius Kegs, this keg has welded stainless handles and the ability to stack kegs with fittings still in place all at a great price. Cool FeaturesTorpedo Kegs were designed to stack with Ball Lock quick disconnects in place and serving which is a cool feature for some brewers who have vertical space in their refrigerator. We also like the rolled stainless steel handles. They are comfortable to grab and will never come off like some rubber handles can over time. “In” and “Out” is etched near the keg posts for easy identification which is very handy when you are connecting lines in a refrigerator or kegerator and trying not to make a mistake. Specifications: Max Pressure: 130 psi PRV Rating: 85 psi High Quality Laser Welded Seams ISO9001 Quality Assurance Made from 304 Stainless Steel
$99.99 - $129.99
Floating Dip Tube Filter Attachment
This really handy little filter can be used with the Torpedo Keg Buoy or the floating dip tubes included with the Kegmenter and FermZilla Pressure Kit to prevent hops or other solids from getting sucked into the dip tube itself. The 304 stainless 80 mesh is fine enough to filter out hops and many other solids but not so fine that it gets blocked up easily. If you have a FermZilla or stainless Kegmenter this add is a must. Made from HDPE and 304 Grade stainless steel, this product can be boiled or sanitized in the full range of cleaners that we sell. The plastic HDPE is over molded onto the stainless mesh to make a seamless finish. The end cap can easily pop off for cleaning.
$3.99
O-Ring - Keg Post - Green
Replacement o-ring for Cornelius keg post.
$0.50 - $3.99
Pin Lock Conversion Body Connect - Beverage Out
Convert a pin lock beverage out post over to a ball lock. Includes o-ring (not pictured) Does not include poppet valve
$7.50
6pk - O-ring for Universal Poppet
Universal poppet valve fits most kegs.
$3.99
Dip Tube - Gas In (S/S)
Replacement gas in stainless steel dip tube for Corny style kegs.
$4.99
Pin Lock Conversion Body Connect - Gas In
Convert a pin lock gas in post over to a ball lock. Includes o-ring (not pictured) Does not include poppet valve
$7.50
Carbonation Keg Lid
A corny keg lid with an extra gas post which connects to a .5 micron stone. Simply connect your gas quick disconnect to the included fitting on the lid and allow carbonation to begin. How to use this product:Beer must be stored cold 34–40°F1. Preboil the stone for 2–3 minutes before using. This assures you that your stone is sterile and any residual oils have been boiled off.2. Sanitize the whole keg lid before submersing into your keg filled with beer.3. Set your PSI on your regulator to 3–4psi and attach your gas in fitting to the body connect on the lid. Leave keg at this pressure for 1 hour.4. Raise your pressure 2PSI per hour until you reach 10–12psi. Leave it at 10–12psi for 24 hours. Pour a pint and test the carbonation. If you think your beer needs more CO2 leave for another 4–6 hours and have another pint.5. Remove carbonation lid after carbonation level is satisfactory. Return original keg lid for long term storage.
$59.99
Ball Lock Post Bulkhead - Beverage Out
This beverage out ball lock post bulkhead assembly allows you to add a ball lock post just about anywhere. Use in conjunction with the gas in bulkhead to create your own pressure vessel. The included short dip tube can be replaced with a longer dip suitable to your needs. 1/4" BSP threads and locking nut.
$11.99
O-Ring - Keg Post - Yellow
Replacement o-ring for Cornelius keg post.
$0.50 - $3.99
Petrol-Gel® Sanitary Food Grade Lubricant
Lubricates & protects o-rings & other kegging equipment Petrol-Gel is the purest of lubricants, made with an odorless, tasteless, high viscosity index paraffinic base oil. Petrol-Gel is compounded with appropriate food grade additives to meet the performance demands for all recommended applications. Authorized by USDA as a lubricant for use where there is incidental contact with food. Use on valves, pistons, pumps, O-rings, guides, slide mechanisms, & more. Tasteless & odorless Will not taint beer USDA Rated H-1 FDA Approved Impervious to water Operating Temp 0 - 185F High melting point 195F Technical white grease Valves, pistons, pumps, O-rings, guides, slide mechanisms, & more. 4 ounce tube
$7.99
Corny Keg Lid with Tab
A replacement lid for Cornelius (Corny) kegs. This lid has a tab welded on the inside for hanging mesh bags of dry hops, oak, or other additives. Pressure relief valve and lid o-ring included.
$24.99
Poppet Valve, Becker
This poppet valve will fit most Cornelius kegs.
$4.50
Carbonator Reactor Carbonation Keg Lid
Nothing is more refreshing that having your own soda water on tap at home. SodaStream units are great but filling up those tiny 1L bottles is a pain and those small CO2 cylinders run out fast and are expensive to swap. Solve this problem once and for all with the Continuous Soda Carbonator Keg Reactor Solution. KegLand has invented this really easy-to-use keg lid that attaches to a standard ball lock keg. Setup: Position the keg inside your fridge or kegerator (ideally below 40°F). Attach your beverage draft line to the soda water out post. Attach your gas line to the gas-in post. Set your CO2 regulator to 30-50 psi, depending on how highly carbonated you like your soda water. We highly recommend using a check valve on your CO2 line. On first use, purge the air from the headspace of the keg. Connect the mains water to the water inlet post on the lid of the keg. It is recommend to also use a check valve on your mains water line to prevent soda water from going back into your house mains. Depending on your mains water pressure, you may need to reduce it using the Duotight In-Line Regulator. For the Carbonator Keg Lid to work well, the mains water pressure should be 30-40 psi higher than your regulator set pressure (from Step 4). That's it. This simple unit will give you continuous soda water connected to your mains water.
$69.99
Beverage Out Dip Tube, Ball Lock Kegs
Curved beverage (liquid) out curved dip tube for 5 gallon Cornelius style ball lock kegs. Stainless Steel.
$16.99
Plastic Boot, Corny Lid Boot
For Cornelius manufactured tanks.
$1.00
Megamouth Torpedo Ball Lock Keg - 10 Gallon
The Megamouth Torpedo Kegs are by far the easiest to clean and maintain out of any ball lock homebrew keg you'll find. With an extra-large lid opening, even the buffest of homebrewer (we hear they do exist!) will have no trouble reaching in for a good scrub when it kicks—no expensive keg washing contraptions needed! The Megamouth makes for an excellent pressurizable fermentation vessel and is the ideal choice for brewers who prefer to add dry hops and other flavoring ingredients directly to the keg. The brand new patented design, D794,899, of the Torpedo Keg gives you a high quality keg with features that a dedicated home brewer will appreciate. The machine welds on the Torpedo Keg exceed our standards for quality. There are no nooks and crannies for contaminant to get lodged in. The weld quality is possible because these kegs made by an ISO certified commercial keg manufacturer. These kegs can be stacked on top of each other with the Ball Lock quick disconnects still attached. They feature rolled stainless steel handles that are comfortable to grab. "In" and "Out" are etched near the keg posts for a quick and mistake-free set up when you are connecting lines in a refrigerator or kegerator. Considering the price and quality, the Torpedo Keg is an amazing value! Mouth opening is 5.8" L x 4.8" W. Height - 30.3" Width - 11.4"
$209.99
Sanke Valve/Spear Removal Tool
This tool is for removing the valve and spear on American Sanke kegs. This tool will push the spear down, it does not remove the ring.
$94.99
