Keg Couplers Main

75 products


  • Probe Seal - Micro Matic D System Probe Seal - Micro Matic D System

    Probe Seal - Micro Matic D System

    41 in stock

    Keg beer dispense heads probe seal for Micro Matic D system couplers. Listed as #4 on the exploded view photo.

    41 in stock

    $1.99

  • Coupler Body O-Ring, Perlick

    Coupler Body O-Ring, Perlick

    6 in stock

    Replacement body o-ring for Perlick couplers.

    6 in stock

    $0.75

  • Poppet Valve CMB Disconnects

    Poppet Valve CMB Disconnects

    35 in stock

    Replacement poppet valve for all CMB ball lock disconnects.

    35 in stock

    $1.99

  • Coupler Check Ball

    Coupler Check Ball

    15 in stock

    Sanke Coupler Check Ball Coupler Probe Type: Type A, Type G, Type U

    15 in stock

    $3.50

  • Check Valve, Perlick Coupler

    Check Valve, Perlick Coupler

    11 in stock

    Check valve for Perlick couplers.

    11 in stock

    $3.25

  • 857c41bc36ba2d1be4e16d321e3f15b7%2F35590%5B1%5D.png 857c41bc36ba2d1be4e16d321e3f15b7%2F35591%5B1%5D.png

    Ball Lock Adapter Tapping Head for Sanke Kegs

    1 in stock

    Convert a commercial sanke keg to be used with ball lock fittings. To install, remove the keg spear, place the gasket on the keg ferrule with the beaded side facing up, attach the silicone dip tube and place the tapping head on the ferrule, then secure with the 2" tri-clamp. **Be sure to always depressurize the keg before removing the tapping head.** Includes: Ball Lock Post Lid 2" tri-clamp Single-side beaded tri-clamp gasket 60 cm silicone dip tube (23.6") Red 2.5 bar PRV (36 psi)

    1 in stock

    $59.99

  • Beverage Ball Lock, SS Barbed

    Beverage Ball Lock, SS Barbed

    4 in stock

    304 Stainless steel ball lock liquid (beverage out) side connector with 1/4" barb connection.

    4 in stock

    $21.99

  • Ball Lock Disconnect (Gas) with Built-in Check Valve, CM Becker

    Ball Lock Disconnect (Gas) with Built-in Check Valve, CM Becker

    7 in stock

    Plastic ball lock gas in coupler with 1/4" MFL.  Quick disconnect for ball lock Cornelius (Corny)-type kegs. This disconnect has an internal check valve that will allow the gas to flow out, but won’t allow backflow of liquid back into your system. Internal Check Valve protects your system from liquid back flow! Made in Germany and assembled in the USA by CMB. Extremely high quality for years of service. NSF Approved for Food Grade Service!

    7 in stock

    $14.99

  • D System With Chrome Plated Brass Body & Chrome Plated Brass Probe D System With Chrome Plated Brass Body & Chrome Plated Brass Probe

    D System With Chrome Plated Brass Body & Chrome Plated Brass Probe

    10 in stock

    D system Keg coupler Chrome-plated Body & Probe US Sankey keg coupler to dispense draft beer from the keg. Tap the keg with ease with this lever handle style coupler. Place the coupler base aligned over the valve. Pull the handle out and put down to lock the coupler in this position. You can now enjoy an uninterrupted flow of your favorite beer. D system keg couplers are also called American Sankeys as they work with most North American kegs. USA and Canadian brands, like Budweiser, Busch, Coors Light, Killian’s, Labatt, Michelob, Miller Lite, Milwaukee’s Best, Molson, Moosehead, OV, Pete’s Wicked, Sam Adams use D type keg valves. Both body and probe made of Brass with Chrome plating. Durable and less expensive than SS counterpart. D system keg coupler is the predominant valve system used by most domestic and commercial breweries in the USA. This is a domestic keg tapping device for US local beers that draws beer out from kegs. Use a reliable and durable keg coupler. Choose from the various options and material combinations that suit your needs best. Both coupler body and probe made of Brass material with a layer of Chrome. Durable and built for heavy-duty use in commercial places like pubs and bars.  Pressure Relief valve included for safety.  Releases overpressure gas at 56 – 65 PSI All Krome keg couplers are NSF approved.

    10 in stock

    $30.99

  • Probe O-Ring - Micro Matic D System Probe O-Ring - Micro Matic D System

    Probe O-Ring - Micro Matic D System

    72 in stock

    Keg beer dispense heads body o-ring for Micro Matic D system couplers. Listed as #5 on the exploded view photo.

    72 in stock

    $1.99

  • Duotight Ball Lock Quick Disconnect (9.5mm) - Beverage Out

    Duotight Ball Lock Quick Disconnect (9.5mm) - Beverage Out

    15 in stock

    The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world.  Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. Enter the Duotight Ball Lock QD. The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably with no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitizing an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings (no cheap ABS plastics here) this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitizers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required This particular ball lock disconnect has been designed for use with EVABarrier 9.5 mm OD Tubing. Due to the integrated Duotight fitting the line will simply push directly into this fitting. Ball Lock Quick Disconnect - Beverage Out Direct connect 8 mm OD EVABarrier tubing Compact design won't interfere with keg stacking Made from highly chemical resistant materials Disassemble by hand for quick and easy cleaning

    15 in stock

    $7.99

  • 'A' System "German Slider" Tap

    'A' System "German Slider" Tap

    1 in stock

    This A System "German Slider" keg coupler is manufactured my Micro Matic, a leader in the beverage dispensing industry.  The A system tap is commonly referred to as the "German Slider" because it slides onto the valve face.  This makes for a quick and easy installation.   The keg coupler connects to the keg valve, "tapping" the keg. Both the gas line from the CO2 tank/regulator and the beer hose to the beer faucet attach to the coupler. It is used by breweries such as Hoegaarden, Paulaner, Spaten, and Warsteiner. FEATURES Slide on keg connection 304-grade stainless steel probe for the ultimate in purity Short handle ideal for 1/6th barrel kegs and keg with a rubber chime Ergo lever handle Easy to engage: push down to tap/pull up to untap PRV (pressure relief valve) Fits A System keg valves Easy to use Excellent for beer, cocktails For home or commercial use

    1 in stock

    $95.99

  • Sale -25% Brass Swivel Union, 1/4"FFL X 1/4"FFL

    Brass Swivel Union, 1/4"FFL X 1/4"FFL

    1 in stock

    Specification Brass 45° Flare Fittings SwivelFemale Flare Thread Size: 1/4" FFL x 1/4" FFL

    1 in stock

    $3.99 $2.99

  • Low Profile D System Keg Coupler – Stainless Steel- NSF Certified Low Profile D System Keg Coupler – Stainless Steel- NSF Certified

    Low Profile D System Keg Coupler – Stainless Steel- NSF Certified

    3 in stock

    When you got vertical space challenges, a low profile keg coupler is the only solution. Low Profile D System Keg Coupler comes with PRV (55 Psi Pressure Release valve) and is  NSF Certified. Release excess pressure from a keg pulling PRV ring. Co2 Gas-IN barb of keg coupler is suitable for red beer gas hose (5/16" ID). The body and all internal parts of the dispense coupler are made from 304 stainless steel grades. This is a corrosion-resistant grade and is also considered the best in the food industry. Krome dispense is a leading manufacturer of keg beer dispense keg couplers. Suitable for domestic kegs All stainless 304 body and contact with the beer Silicon check valve included CO2 side of the keg coupler Gas inlet and Beer outlet on sides of the keg coupler Standard industry Parts – like beer nut and gas tailpieces included Once installed, requires less than 3.75″ of vertical space to operate. Saves space in keg stacking setup How to tap low profile keg coupler? Tapping a low profile keg Sankey coupler is easy. Simply twist the coupler on a domestic beer keg. D system keg couplers are also called American Sankeys as they work with most North American kegs. USA and Canadian brands, like Budweiser, Busch, Coors Light, Killian’s, Labatt, Michelob, Miller Lite, Milwaukee’s Best, Molson, Moosehead, OV, Pete’s Wicked, Sam Adams use D type keg valves.

    3 in stock

    $44.99

  • Poppet Spring CMB Disconnects

    Poppet Spring CMB Disconnects

    39 in stock

    Replacement poppet spring for all CMB ball lock disconnects.

    39 in stock

    $0.99

  • Duotight Ball Lock Quick Disconnect (6.35mm) - Gas In

    Duotight Ball Lock Quick Disconnect (6.35mm) - Gas In

    12 in stock

    The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world.  Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. Enter the Duotight Ball Lock QD. The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably with no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitizing an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings (no cheap ABS plastics here) this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitizers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required This particular ball lock disconnect has been designed for use with EVABarrier 6.35 mm OD Tubing. Due to the integrated Duotight fitting the line will simply push directly into this fitting. Ball Lock Quick Disconnect - Gas In Direct connect 6.3 mm OD EVABarrier tubing Compact design won't interfere with keg stacking Made from highly chemical resistant materials Disassemble by hand for quick and easy cleaning Duotight Ball Lock QDs are offered in three sizes that correspond to the outer diameters seen on our line of EVABarrier Draft Tubing.  6.35 mm OD – features a very tight 3 mm ID that requires only 3.2 ft of length for adequate flow resistance. This is the ideal size for mobile draft or if you want to keep your kegerator as tidy as possible. 8 mm OD – the most common OD size of EVABarrier tubing. This size comes in two IDs (4 mm & 5 mm) and pairs up with the lion's share of Duotight fittings and accessories. 4 mm ID is our most recommended size for beverage lines, requiring 5-6 ft. lengths. 5 mm ID is commonly used as gas line or when 10-12 ft. beverage lines are required. 9.5 mm OD – suitable for gas lines or long draw beverage lines. At 6.3 mm ID, this size is ideal for beverage lines that will be 20 ft. or longer in length.

    12 in stock

    $7.99

  • Check Valve with Insert Check Valve with Insert

    Check Valve with Insert

    20 in stock

    Non-return check valve with insert.  Commonly used in U and G system couplers.

    20 in stock

    $3.49

  • Sale -19% Sanke Pump Adapter

    Sanke Pump Adapter

    1 in stock

    For use on Sanke pumps. Material: Brass Finish: Chrome Plated Brass Thread Size: 5/8 BSP

    1 in stock

    $4.95 $3.99

  • Sale -19% Pump Connector with 3/8'' Hose Barb

    Pump Connector with 3/8'' Hose Barb

    2 in stock

    Connects any picnic pump to CO2 inlet side of coupler. Material: Brass Finish: Chrome Plated Brass Barb: 3/8" Length: 5/16"

    2 in stock

    $4.95 $3.99

  • European Sanke Keg Coupler - S Style

    European Sanke Keg Coupler - S Style

    2 in stock

    Keg coupler (tavern head) for S-system (Euro-Sanke, Heineken) kegs. Includes integrated washer/check valve and nut on the gas in side. Nut, nipple, and washer assembly included for both gas and beer inlet/outlet.  Nickel coated body with stainless steel probe. This item does not come with a pressure relief valve.  

    2 in stock

    $45.99

  • Gas Ball Lock, SS Barbed

    Gas Ball Lock, SS Barbed

    3 in stock

    304 Stainless steel ball lock gas (in) connector with 1/4" barb connection.

    3 in stock

    $21.99

  • 'A' System with Chrome Plated Brass Body - Stainless Steel Probe 'A' System with Chrome Plated Brass Body - Stainless Steel Probe

    'A' System with Chrome Plated Brass Body - Stainless Steel Probe

    1 in stock

    Best keg coupler for beer dispensing from S system kegs. Built for both commercial and home use. Align the coupler base with the keg valve and lock it in place by pulling the handle out and down. This A system keg tap coupler body is Brass with a Chrome layer while the Probe is of SS 304 grade. Durable coupler with an ergonomic lever style handle. A system keg couplers are also called German sliders. This is because they are used by popular German breweries and are slide-on style over the keg valve.See our different gas inlet thread sizes and with and without PRV options to pick the one for your needs. A system keg coupler is commonly referred to as the German slider. It is designed to fit many German beers such as Hacker-Pschorr, Hoegaarden, Paulaner, Pimms, Spaten, Warsteiner, and others. Always use the same coupler type as your keg. Durable Brass body with Stainless steel 304 probe – gives only SS contact with your beer. Pressure Relief valve included for safety.  Releases overpressure gas at 56 – 65 PSI 5/8″ x 14 BSP threads for beer outlet. Slide on keg valve connection with sleek black handle.

    1 in stock

    $59.99

  • S System European Sankey Keg Coupler - Stainless - Grey Lever Handle

    S System European Sankey Keg Coupler - Stainless - Grey Lever Handle

    2 in stock

    The S System European Sankey Keg Coupler features a 304-grade stainless steel body, probe and handle fork. Excellent for beer, wine, and cider.   For confident performance, choose a keg coupler designed by the same manufacturer that supplies over 90% of the world's valves. The S System keg coupler, also known as the European Sankey, is distinguished by it’s longer, narrower probe than the D System. It is used by many popular European breweries such as Heineken, Becks, Amstel Light, and Pilsner Urquell. The keg coupler connects to the keg valve, "tapping" the keg. Both the gas line from the CO2 tank/regulator and the beer hose to the beer faucet attach to the coupler.  THIS KEG COUPLER FEATURES  304-grade stainless steel body improves durability and resistance to chemicals  304-grade stainless steel probe for the ultimate in purity  304-grade stainless steel handle fork for added strength  Short handle is ideal for the smaller diameter 1/6 kegs  NSF certified  Grey plastic lever-style handle  Fits S System keg valves  Easy to install and use  For home or commercial use  Made in the USA 

    2 in stock

    $59.99

  • Keg Coupler Torpedo Valve Retainer

    Keg Coupler Torpedo Valve Retainer

    6 in stock

    Non-return torpedo valve retainer for U-system keg couplers.

    6 in stock

    $2.25

  • Replacement Silicone Elbow for PCO38 Tapping Head Replacement Silicone Elbow for PCO38 Tapping Head

    Replacement Silicone Elbow for PCO38 Tapping Head

    5 in stock

    This silicone elbow is a replacement for the elbow provided in the PCO38 Tapping Head Kit.  Allowing for a 90° connection between the barb on the yellow liquid plastic carbonation cap and the 6.3 mm OD dip tube provided in the kit. KegLand Part Number: KL26260

    5 in stock

    $1.99

  • Non-Return Torpedo Valve

    Non-Return Torpedo Valve

    9 in stock

    Replacement non-return torpedo valve for keg couplers.  Similar to a check ball but more commonly found in A, G, and U style couplers. This valve prevents beer in the line from returning to keg.

    9 in stock

    $4.99

  • Stainless Beer Thread Adapter | 2 pack | Female Beer Thread x 1/2 in. BSP | KOMOS®

    Stainless Beer Thread Adapter | 2 pack | Female Beer Thread x 1/2 in. BSP | KOMOS®

    9 in stock

    Convert draft shanks or keg couplers for use with 1/2" female threaded fittings. Featuring a hex nut exterior for easy wrench adjustments. The female side is standard beer thread which is used on both ports of standard keg couplers and the tail end of draft shanks. Once installed, you can adapt these input/output ports to any 1/2" fittings and valves you might find useful. The 1/2" male BSP end may require teflon tape if used with 1/2" NPT fittings. Comes in a pack of 2

    9 in stock

    $9.99

  • KeyKeg™ Coupler - Stainless Steel

    KeyKeg™ Coupler - Stainless Steel

    3 in stock

    Micro Matic has developed a new dispense head for KeyKeg™ one-way kegs which makes it even safer, easier and more convenient to use. The keg coupler connects to the keg valve, "tapping" the keg. Both the gas line from the CO2 tank / regulator and the beer hose to the beer faucet attach to the coupler. Features: Convenient to use integrated degassing function Degassing takes only 10 seconds No special tools needed for degassing 304 Stainless Steel probe for the ultimate in purity Excellent for beer, wine, coffee, cider, etc. Easy to tap with no product splash Easy to engage handle: push down to tap/pull up to untap Specifications: System: KeyKeg™ Probe Material: 304 Stainless Steel Handle Style: Ergonomic Lever Gas Port: 3/8" O.D. Barb (To fit 5/16" I.D. Gas Hose) Beer Port: 7/8"-14 Thread (U.S. Beer Industry Standard) Integral PRV: For safety: pressure relief valve releases at 55-65 PSI

    3 in stock

    $99.99

  • Black Cap Plug CMB Disconnects

    Black Cap Plug CMB Disconnects

    7 in stock

    Replacement black cap plug for CMB ball lock disconnects.

    7 in stock

    $1.25

  • Gray Cap Plug CMB Disconnects

    Gray Cap Plug CMB Disconnects

    10 in stock

    Replacement gray cap plug for CMB ball lock disconnects.

    10 in stock

    $1.25

  • Duotight Ball Lock Quick Disconnect (9.5mm) - Gas In

    13 in stock

    The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world.  Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. Enter the Duotight Ball Lock QD. The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably with no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitizing an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings (no cheap ABS plastics here) this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitizers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required This particular ball lock disconnect has been designed for use with EVABarrier 9.5 mm OD Tubing. Due to the integrated Duotight fitting the line will simply push directly into this fitting. Ball Lock Quick Disconnect - Gas In Direct connect 9.5 mm OD EVABarrier tubing Compact design won't interfere with keg stacking Made from highly chemical resistant materials Disassemble by hand for quick and easy cleaning Duotight Ball Lock QDs are offered in three sizes that correspond to the outer diameters seen on our line of EVABarrier Draft Tubing.  6.35 mm OD – features a very tight 3 mm ID that requires only 3.2 ft of length for adequate flow resistance. This is the ideal size for mobile draft or if you want to keep your kegerator as tidy as possible. 8 mm OD – the most common OD size of EVABarrier tubing. This size comes in two IDs (4 mm & 5 mm) and pairs up with the lion's share of Duotight fittings and accessories. 4 mm ID is our most recommended size for beverage lines, requiring 5-6 ft. lengths. 5 mm ID is commonly used as gas line or when 10-12 ft. beverage lines are required. 9.5 mm OD – suitable for gas lines or long draw beverage lines. At 6.3 mm ID, this size is ideal for beverage lines that will be 20 ft. or longer in length.

    13 in stock

    $7.99

  • Check Valve for Party Pump

    Check Valve for Party Pump

    10 in stock

    Replacement check valve for Micro Matic party pumps.  For Micro Matic HP-100, 300, 500, 700 & 900 series pumps.

    10 in stock

    $2.49

  • Piston Rod O-Ring

    Piston Rod O-Ring

    10 in stock

    Replacement piston rod 0-ring for the Micro Matic 4" and 8" chrome pumps. Dimensions: O.D. 1-7/16" I.D. 1-3/16" x W. 1/8"

    10 in stock

    $2.49

  • Perlick Ball Retainer

    Perlick Ball Retainer

    4 in stock

    Ball retainer for Perlick couplers.

    4 in stock

    $1.95

  • 'U' Style Guinness Tap

    'U' Style Guinness Tap

    1 in stock

    This Guinness, "U Style" keg coupler is manufactured by Micro Matic, a leader in the beverage dispensing industry.  It is most commonly used to tap Guinness beers but will usually fit Abby White, Boddingtons Pub Ale, Harp, Kilkenny, Leffe, Magners, and Smithwicks Ale. Features: Well-type connection Stainless steel probe Easy to engage handle: push down to tap/pull up to untap

    1 in stock

    $79.99

  • German Tap, M System

    German Tap, M System

    1 in stock

    TOF® Import Beer Keg CouplersTOF® has been certified ISO 9001 since 1997 and produces quality keg couplers For use with but not limited to: Veltins Schneider Aventinus Features M-System Coupler Brass Body NSF 61 Galvanic Food Coating INOX AISI 300 S/S Probe Pressure Relief Valve

    1 in stock

    $79.95

Login

Forgot your password?

Don't have an account yet?
Create account