Products
3" Stainless Steel Beer Shank Assembly
This 3" long stainless steel shank assembly has a 1/4" bore. The following is included in the assembly: 3" 304 stainless steel shank with 1/4" bore Locking ring Sleeve Coupling nut Lock nut Choice of either a black plastic flange or stainless steel flange
$25.99 - $29.99
3" Tri-Clamp, Stainless Steel
The most popular choice for sanitary connections, tri-clamp fittings are widely used in the food & beverage industry due to their ability to be cleaned in place. Tri-clamps join two fittings together without any nooks or crannies for contaminants to hide. Use anywhere you want to ensure a sanitary connection. 3" tri-clamp Made from 304 stainless steel
$16.50
3'' Chrome Plated Cooler Wall Shank
3" chrome plated special cooler wall shank with 1/4" x 3/8" bore. Specifications: Finish: Chrome PlatedBody: Material BrassLength: 3-1/8"Bore ID: 1/4" x 3/8"
$17.99
3'' Cooler Wall Coupler, SS
304 Stainless Steel Cooler Wall Coupler with 5/16" Bore. Material: Stainless Steel 304 Finish: SS Polished Length: 3" Bore ID: 5/16" Thread Size: 5/8"-14 BSP
$19.99
3'' Special Cooler Wall Shank, (5/16'' x 1/4'' ), SS
3" Special Shank Assembly for Jockey Box. Material: Stainless Steel Bore: 1/4" x 5/16"
$23.99
3'' Tri-Clamp Gasket with Mesh Screen
Teflon gasket with 304 stainless mesh screen for 3" tri-clamp connections. Can be used as a filter screen to trap large particulates passing through T.C. fittings. Often used for distillation to retain activated carbon for filtering neutral spirits or used in pot distillation to retain botanicals in the vapor stream. The screen has a mesh size of 7 which will block particles larger than 2.83mm or 2830 microns. This slightly larger mesh size makes this screen ideal for use in a distillation basket. KegLand Part Number: KL28868
$11.00
3'' x 5/16'' Bore Cooler Wall Coupling Assembly, Chrome Plated
3” shank for jockey box. Material: Brass Finish: Chrome Plated Brass Length: 3" Bore ID: 5/16" Thread Size: 5/8" - 14 BSP Important information: Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
$14.99
3-1/8" Beer Shank Assembly – Chrome Plated Brass
Beer Shank Extension Faucet Assembly - 3-1/8"L with 1/4" Bore. This Micro Matic, NSF-certified Beer Shank Extension Faucet Assembly is made of chrome-plated brass and is excellent for both home and commercial bars. The beer shank assembly uses Micro Matic's SpinStop™ technology, a simple solution that stops the spin and keeps the faucets upright. The assembly includes the flange, coupling nut, and lock nut necessary to attach it to the draft beer tower and beer faucet. Designed with 7/8"-14 (5/8" BSP U.S. Beer Industry Standard) straight pipe thread, this shank will work with all North American faucets. If you're using equipment from outside North America, you'll need to source a specialty shank. A high-end beer shank is crucial to serving up perfectly fresh beer from a draft beer faucet. The beer shank is inserted through your refrigerator or house wall. On one end, inside the fridge, you attach the beer lines. On the other end, the shank is connected to your draft faucet. Features Complete assembly Chrome-plated brass Connects beer lines to the faucet Micro Matic's SpinStop™ technology – keeps the faucets upright Highly durable Fits on North American faucets NSF certified Specifications Length: 3-1/8" Bore I.D.: 1/4" Thread: 7/8"-14 (5/8" BSP) (U.S. Beer Industry Standard) Material: Chrome Plated Brass Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
$19.99
3-1/8" Stainless Shank Assembly
This 304 stainless steel shank made by Micro Matic is a perfect option for serving up fresh beverages from a draft faucet. The shank provides a bulkhead through your refrigerator door. The end that is inside the fridge you attached your beverage line with a tailpiece and hex nut. On the other end of the shank you attach your draft faucet. This NSF-certified shank is made of 304-grade stainless steel and is excellent for any beverage. The shank assembly uses Micro Matic's SpinStop™ technology, a simple solution that stops the spin and keeps the faucets upright. Includes the flanges, coupling nut, and lock nut necessary to attach it to the draft tower and faucet. Designed with 7/8"-14 (5/8" BSP U.S. Beer Industry Standard) straight pipe thread, this shank will work with all North American faucets. FEATURES The best in purity - only 304 stainless steel touches the product Complete assembly Connects beverage lines to the faucet Excellent for any beverage Highly durable SpinStop™ technology – keeps the faucets upright Fits on North American faucets NSF certified SPECIFICATIONS Dimensions: 3-1/8"L Bore Dimensions: 1/4" I.D. Shank thread: 7/8"-14 (5/8" BSP U.S. Beer Industry Standard)
$34.99
3-1/8″ Stainless Steel Shank Assembly – 3/16″ I.D. Bore
Manufactured by Krome Dispense, the shank is made from stainless steel 304, is 3-1/8” long and has 3/16” Bore ID. Includes black plastic flange, coupling sleeve, snap ring, and coupling nut. Stainless steel will not impart any off-tastes and will not tarnish like brass or pit like chrome. Stainless is a great choice for all beer, wine, cocktails, or cider. Specifications: Material: 304 Stainless Steel Length: 3-1/8" Bore ID: 3/16" Thread Size: 5/8"-14 BSP Made in India.
$14.49
3-1/8″ Standard Wine Shank – 1/4″ Bore I.D
This 3-1/8" shank is made of 316 surgical grade stainless steel making it more resistant to the acidic nature of wine. Includes: 3-1/8" 316 stainless steel shank with 1/4 bore Forged brass lock nut Black plastic flange Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. Made in India
$16.99
3-Way Beer Manifold
Material: Stainless Steel 304 Mounting Bracket: Integrated Inlet Connection: 1/2" O.D. Barb Outlet Connection: 7/8" - 14 (5/8" BSP)
$69.95 $39.99
3-Way Gas Manifold
3-way horizontal gas manifold without safety pressure release. 3/8" barbed inlet (3) 5/16" barbed shut-offs Shut-offs do not include check valves Aluminum body
$44.99
3-Way Modular Gas Manifold
This modular gas manifold will allow you split one CO2 line to three of them. Each line can be turned off individually without affecting the flow to other kegs. Each ball valve contains a check valve that ensures no beer or gas can flow between the two kegs. The barbs are all 5/16" which is standard for gas line in the beer industry. If later, you decide to add an additional keg this manifold can be expanded using the Add On Assembly.
$43.00
3/16" ID Silicone Tubing
Tasteless, odorless, and food grade approved from -100F to 500F. This tubing is rated to 20 PSI and will burst at 60 PSI at 70F. It is not recommended for use with an impeller pump or household water pressure. Inner Diameter: 3/16" Outer Diameter: Approximately 3/8" Working Pressure: 20 psi Burst Pressure: 60 psi Material: Silicone Function: High Temperature
$1.45 - $107.00
3/16" ID Vinyl Draft Tubing
3/16" ID vinyl beverage and gas tubing. Accuflex Bevlex 200 PVC Tubing is used for draft beer transfer and BIB soft drink applications. Its special dual durometer construction combines a low extraction inner contact surface with a flexible outer layer to provide excellent kink resistance and taste protection. NSF-51 Listed. Inside Diameter (ID): 3/16" Outside Diameter (OD): 7/16" Clamp Size: 13.3mm Available in clear or black, by the foot or 100' roll. Prop 65 Warning: This product contains phthalates (DEHP, DBP, BBP), a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.
$1.20 - $79.99
3/16" Stainless Steel Tailpiece (304)
3/16" ID stainless steel tailpiece commonly used for 3/16" ID draft tubing. 304 Stainless Steel
$3.49
3/16" Stainless Steel Tailpiece (316)
3/16" ID stainless steel tailpiece commonly used for 3/16" ID draft tubing. 316 Stainless Steel
$3.99
3/16'' X 66" Hose Brush
Nylon Hose Brush Long With 3/16″ O.D x 66″ L Scrub away build up in beer line with this 66" long brush. The brush is made on nylon bristles with 3/16" outer diameter (OD). Specially made for draft beer systems using smaller diameter beer tubing. Clean your lines regularly to keep your draft system free from contamination. Specifications Brush Size: 3/16" OD Brush Length: 4" Total Length: 66" Finish: Raw Warnings / Instructions Important information – Prop. 65 for CA residents. Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
$6.99
3/16” x 1/4” Splicer, Stainless
3/16" x 1/4" hose splicer, 303 stainless (for 3/16"ID and 1/4"ID hose).
$2.99
3/16” x 3/16” Splicer, 304 S/S
Stainless steel barbed splicer generally used for attaching two pieces of beer draft line. Specifications 304 Stainless Steel OD: 1/4" ID: 1/16" Splices Tubing Sizes 3/16" I.D. Vinyl to 3/16" I.D. Vinyl 3/16" I.D. Vinyl to 1/4" I.D. Poly 1/4" I.D. Poly to 1/4" I.D. Poly
$3.49
3/16” x 3/8” Splicer, Stainless
Splice together 3/16" ID and 3/8" ID tubing with this 303 stainless steel hose splicer.
$3.99
3/16” x 5/16” Splicer, Stainless
Splice together 3/16" ID and 5/16" ID tubing with this 303 stainless steel hose splicer.
$3.74
3/4" Faucet Cleaning Brush
Don't make cleaning your kegerator faucet a difficult task. This quality nylon faucet brush is a helpful tool for removing build-up in your faucets. Features: Measures 3/4" in diameter Brush measures 3" in length and 8-1/2" in overall length Bristle materials: nylon Removes build-up
$5.50
3/4" Male ght and 1/2" fpt
This brass fitting has 3/4" male garden hose thread on one side and both 3/4" mpt and 1/2" fpt on the other.
$3.95
3/4'' FHT x 1/2'' Barb, Stainless Steel
3/4" female hose thread x 1/2" barb, stainless steel
$8.95
3/4'' NPT Flat Gasket
This is a replacement silicone gasket for weldless assemblies. 1.5" OD and 1" ID Fits around 3/4" npt nipples
$1.10
3/8 Kettle Screen
The accessory that turns your kettle / pot into a mash tun. All stainless steel, 12" long, 3/8" male NPT thread.
$15.95
3/8" Dual Function Bottle Filler
Use as spring model or springless. Disassembles for easy change & cleaning
$3.99
3/8" FPT x 1/2" MPT Bushing
3/8" FPT x 1/2" MPT Bushing 304 Stainless Steel
$8.49
3/8" Full Port Stainless Ball Valve
304 stainless steel full port ball valve with 3/8" female pipe thread (FPT) on both ends. Note: Handle may be blue instead of the pictured yellow.
$16.50
3/8" ID Clear Vinyl Tubing
Clear, flexible, and food-safe, this polyvinyl chloride (PVC) tubing is perfect for handling beverages and liquids. Material: PVC (polyvinyl chloride) ID: 3/8" OD: 1/2" Wall: 1/8" Max. Pressure: 40 psi (at 70°F. Higher temperatures lower maximum working pressures.) Max. Temperature: 150°F Prop 65 Warning: This product contains phthalates (DEHP, DBP, BBP), a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.
$0.70 - $45.99
3/8" ID Silicone Tubing
Tasteless, odorless, and food grade approved from -100F to 500F. This tubing is rated to 20 PSI and will burst at 30 PSI at 70F. It is not recommended for use with an impeller pump or household water pressure. 3/8" ID 5/8" OD 30 PSI Burst at 70F Platinum Cured
$3.20 - $242.00
3/8" MPT x 1/2" Barb, Brass
Brass Hose Stem 3/8" MPT (malt pipe thread) 1/2" hose barb
$3.10 $2.49
3/8" Racking Cane Holder
Fits 3/8" racking canes, clips to the side of your bucket or carboy.
$3.99
3/8" Stainless Half Coupler
Stainless steel 3/8" female pipe thread (FPT) half coupler. Note: Half couplers have thread for insertion from one side only.
$4.99
