Products

Regulator repair kit for 2" diaphragm Taprite co2 regulators (series 740, series 1660, series 5260, series 5740). Includes diaphragm, capsule, and flat tank seal.

Read more less

2" maximizer allows you to transfer more liquid from your brew kettle. The maximizer will thread into a 1/2" FPT fitting inside your kettle.

Read more less

2'' Tri-Clamp Ferrule made of Stainless Steel. 1" long

Read more less

2'' TC Ferrule made of Stainless Steel. 1.5" long Lightly used, clean and in good working order

Read more less

TC Gaskets are typically used in between a rotating racking arm and the ferrule. The ultra smooth, hard surface of the rotatable gasket allows the arm to be rotated after only very slightly loosening the TC clamp, so the junction remains liquid tight. Some brewers and winemakers prefer this style of gasket in all applications because they find the gaskets' rigidity helps make connecting the TC parts easier. Fits 2" TC fittings.

Read more less

Teflon gasket with 304 stainless mesh screen for 2" tri-clamp connections. Can be used as a filter screen to trap large particulates passing through T.C. fittings. Often used for distillation to retain activated carbon for filtering neutral spirits or used in pot distillation to retain botanicals in the vapor stream. Fits 2" TC fittings.

Read more less

304-Polished Stainless tee with 2" tri-clamp connections.

Read more less

Barbed fitting for use with tri-clamp systems. This fitting has a 2 inch TC on one side, 2 inch barb on the other side. Use with 2 inch ID hose. The barbed stem is 4-1/2" long. 304 Stainless Steel

Read more less

Shank Beer Faucet Assembly - 2-1/8"L with 1/4" Bore. Made of chrome-plated brass, this NSF certified beer shank is excellent for both home and commercial bars. A high-end shank is crucial to serving up perfectly fresh beer from a draft beer faucet. The shank beer faucet is inserted through your refrigerator or house wall. On one end, inside the fridge, you attach the beer lines. On the other end, the shank is connected to your draft faucet.   This Micro Matic, NSF-certified shank is made of chrome-plated brass and is excellent for both home and commercial bars. The beer shank assembly uses Micro Matic's SpinStop™ technology, a simple solution that stops the spin and keeps the faucets upright. Includes the flange, coupling nut, and lock nut necessary to attach it to the draft tower and faucet. Designed with 7/8"-14 (5/8" BSP U.S. Beer Industry Standard) straight pipe thread, this shank will work with all North American faucets. If you're using equipment from outside North America, you'll need to source a specialty shank.  Features Complete assembly  Chrome-plated brass  Connects beer lines to the faucet  SpinStop™ technology – keeps the faucets upright  Highly durable  Fits on North American faucets  NSF certified  Specifications Length:  2-1/8" Bore I.D.:  1/4" Material: Chrome Plated Brass Approval:  NSF Certified

Read more less

Stainless Steel Beer Faucet Shank Assembly - 2-1/8"L with 1/4" Bore. Made of 304 stainless steel, this NSF certified shank can be used for any beverage. A high-end shank is crucial to serving up perfectly fresh beverages from a draft faucet. The stainless steel beer faucet shank assembly is inserted through your refrigerator or house wall. On one end, inside the fridge, you attach the beverage lines. On the other end, the shank is connected to your draft faucet.  This Micro Matic, NSF-certified beer shank is made of 304-grade stainless steel and is excellent for any beverage. The shank assembly uses Micro Matic's SpinStop™ technology, a simple solution that stops the spin and keeps the faucets upright. Includes the flange, coupling nut, and lock nut necessary to attach it to the draft tower and faucet. Designed with 7/8"-14 (5/8" BSP U.S. Beer Industry Standard) straight pipe thread, this shank will work with all North American faucets. If you're using equipment from outside North America, you'll need to source a specialty shank.  STAINLESS STEEL SHANK FEATURES  The best in purity - only 304 stainless steel touches the product  Complete assembly  Connects beverage lines to the faucet  Excellent for any beverage  Highly durable  Micro Matic's SpinStop™ technology – keeps the faucets upright  Fits on North American faucets  NSF certified  Specifications Use:  Dispensing Wine / Cider / Beer Length:  2-1/8" Bore I.D.:  1/4" Material:  304 Stainless Steel Approval:  NSF Certified

Read more less

This modular gas manifold will allow you split one CO2 line to multiple ones.  Each line can be turned off individually without affecting the flow to other kegs.  Each ball valve contains a check valve that ensures no beer or gas can flow between the two kegs.  The barbs are all 5/16" which is standard for gas line in the beer industry.   If later, you decide to add an additional keg this manifold can be expanded using the Add On Assembly.

Read more less

A great fermenter option for kombucha brewing.  This 2.1 gallon (8L) glass beverage dispenser comes with an infusion chamber insert and stainless steel spigot.  This dispenser is also provides a great way to dispense lemon water, sun tea, or pre-mixed cocktails. Glass beverage dispenser Removable infusion chamber Stainless steel spigot *DO NOT PUT HOT LIQUIDS INTO THIS GLASS JAR*  

Read more less

Oak barrels have long been essential for aging premium wine, beer, spirits, vinegar - even hot sauce. Now, the ability to achieve similar results directly in the bottle - assing flavor, color, aroma and complexity - is made possible with Oak Infusion Spirals from The Barrel Mill™. It's a new twist on a centuries-old tradition. Directions:Simply add the Infusion Spiral to a standard bottle of rum, tequila or monnshine - or when bottling your Bomber or Growler of IPA, Stout or Porter. You will notice a color change within and can begin sampling after a week to determine preferred effect. Flavor will be completely extracted at two weeks. Suggested usage rate: for beer, spirits, and cider, use one (1) Oak Infused Bottle Spiral per 750 mL for 1-2 weeks. Dimensions: 5/8" x 2.5"

Read more less

These 2.5 gram sulfur discs are ideally sized for 30 gallon barrels.  Break the disc into smaller parts for use in smaller barrels.  Best when used with a sulfur burner. 10 pack

Read more less

Does not ship.  In store pick up only. Filled 2.5 pound aluminum CO2 cylinder. Will dispense approximately 4-5 five gallon kegs before needing to be refilled.         These are used cylinders that have been filled from a local vendor.      

Read more less

20 GALLON STAINLESS BREW KETTLE - V4 Spike Brewing has once again re-designed their brew kettle.  They make one of the best brewing kettles available on the market.  It is the thickest kettle on the market, with US welded fittings (no more weldless fittings) at a factory direct price. Kettle Features: 6 - 15 gallon batch size 304 (18/8) stainless steel  Sanitary welded coupler design (done at our facility in Milwaukee, WI) 1.2mm thick walls (thickest on the market) 5mm tri-clad bottom (induction capable) Internal volume markings Polished finish 17.7¨ wide by 21.4¨ tall Domed bottom design Bottom coupler 1.5" off the bottom (2 gallon mark) Top coupler 6" off the bottom (6.5 gallon mark) Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store.  Drop ships from vendor.

Read more less

20 GALLON SPIKE+ BREW KETTLE Introducing Spike Brewing's new Spike+ line of kettles! Spike+ is just that, an improvement on an already great platform. The Spike+ line draws from the pro side of brewing with the standard use of tri-clamp (TC) fittings. TC fittings do not have any threads and use a gasket and clamp which allows for quick attaching/detaching of fittings. The Spike+ line is for the most serious homebrewers! While designing the setup of the kettle, Spike Brewing offset the ports on these kettles, so you have ample room to use our butterfly valves, or other accessories, with ease. Kettle Features: 6 – 15 gallon batch 304 (18/8) stainless steel  Sanitary welded coupler design (done at Spike Brewing's facility in Milwaukee, WI) 1.2mm thick walls (thickest on the market) 5mm tri-clad bottom (induction capable) Internal volume markings Polished finish 17.7¨ wide by 21.4¨ tall Domed bottom design Bottom coupler 2" off the bottom (2.5 gallon mark) Top coupler 4" off the bottom (4 gallon mark) Staggered design keeps the top port submerged with half batches Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store.  Drop ships from vendor.

Read more less

Size: 28x42cm/11"x16.5" 20w heat wrap with adjustable power knob. Can be used as a pad/mat or as a wrap.

Read more less

Stainless Steel, Stepless Oetiker Clamp This style of clamp tightens in an exact circle, making them ideal for use with draft lines.  20.5mm for 3/4" OD Tubing.  (17-20mm OD) Stepless Clamp Tool sold separately.

Read more less

200 pack of 8 micron filters for the Super Jet.

Read more less

200 pack of .5-1 micron filters for the Super Jet. 

Read more less

Wyeast 2007 is the classic American lager strain. This mild, neutral strain produces beers with a nice malty character and a smooth palate. It ferments dry and crisp with minimal sulfur or diacetyl. Beers from this strain exhibit the characteristics of the most popular lager in America. Flocculation: MediumAttenuation: 71-75%Temperature Range: 48-56F, 9-13CAlcohol Tolerance: 9% ABV Styles: Classic American Pilsner, Dark American Lager, German Pilsner (Pils), Lite American Lager, Premium American Lager, Schwarzbier (Black Beer), Standard American Lager We ship all liquid yeast with an ice pack and insulated bubble envelope. Beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.

Read more less

200 ml (6.7oz) glass flasks feature the iconic flask shape, large label panel, and authentic curved back. They are a staple for liquors like Gin and Vodka. Accepts 28mm-350 screw top.

Read more less

In store pick up only.  Does not ship. Filled 20 pound aluminum CO2 cylinder. Will dispense approximately 40 five gallon kegs before needing to be refilled or exchanged. Dimensions: 20.75" Tall x 7" wide.  These are used cylinders that have been filled from a local vendor.

Read more less

This strain is particularly well suited for producing California Common-style beers. It retains lager characteristics at temperatures up to 65°F (18°C) and produces malty, brilliantly clear beers. This strain is not recommended for cold temperature fermentation. Flocculation: HighAttenuation: 67-71%Temperature Range: 58-68° F (14-20° C)Alcohol Tolerance: Approximately 9% ABV Styles: Baltic Porter, California Common Beer, Christmas/Winter Specialty Spiced Beer, Cream Ale, Other Smoked Beer, Premium American Lager, Spice, Herb, or Vegetable Beer We ship all liquid yeast with an ice pack and insulated bubble envelope. Beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.

Read more less